Re: [RFC PATCH 03/14] ASoC: qcom: move ipq806x specific bits out of lpass driver.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 30, 2015 at 06:16:53PM +0100, Srinivas Kandagatla wrote:
> This patch tries to make the lpass driver more generic by moving the
> ipq806x specific bits out of the cpu and platform driver, also allows the
> SOC specific drivers to add the correct register offsets.
> 
> This patch also renames the register definition header file into more
> generic header file.

> diff --git a/sound/soc/qcom/lpass-ipq806x.c b/sound/soc/qcom/lpass-ipq806x.c
> new file mode 100644
> index 0000000..8e9a427
> --- /dev/null
> +++ b/sound/soc/qcom/lpass-ipq806x.c

> +static const struct of_device_id ipq806x_lpass_cpu_device_id[] = {
> +	{ .compatible = "qcom,lpass-cpu", .data = &ipq806x_data },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, ipq806x_lpass_cpu_device_id);

Surround with #ifdef CONFIG_OF?

> diff --git a/sound/soc/qcom/lpass-lpaif-reg.h b/sound/soc/qcom/lpass-lpaif-reg.h
> new file mode 100644
> index 0000000..5541b14
> --- /dev/null
> +++ b/sound/soc/qcom/lpass-lpaif-reg.h

> +#define LPAIF_I2SCTL_REG_ADDR(v, addr, port) \
> +	(v->i2sctrl_reg_base + (addr) + v->i2sctrl_reg_stride * (port))

Could all of these variant-related macros be eliminated by using the
regmap_fields_* accessor functions, instead of the regmap_* functions?

> +enum lpaif_i2s_ports {
> +	LPAIF_I2S_PORT_MIN		= 0,
> +
> +	LPAIF_I2S_PORT_CODEC_SPK	= 0,
> +	LPAIF_I2S_PORT_CODEC_MIC	= 1,
> +	LPAIF_I2S_PORT_SEC_SPK		= 2,
> +	LPAIF_I2S_PORT_SEC_MIC		= 3,
> +	LPAIF_I2S_PORT_MI2S		= 4,
> +
> +	LPAIF_I2S_PORT_MAX		= 4,
> +	LPAIF_I2S_PORT_NUM		= 5,
> +};

These port mappings here...

> +enum lpaif_irq_ports {
> +	LPAIF_IRQ_PORT_MIN		= 0,
> +
> +	LPAIF_IRQ_PORT_HOST		= 0,
> +	LPAIF_IRQ_PORT_ADSP		= 1,
> +
> +	LPAIF_IRQ_PORT_MAX		= 2,
> +	LPAIF_IRQ_PORT_NUM		= 3,
> +};

...here...

> +enum lpaif_dma_channels {
> +	LPAIF_RDMA_CHAN_MIN		= 0,
> +
> +	LPAIF_RDMA_CHAN_MI2S		= 0,
> +	LPAIF_RDMA_CHAN_PCM0		= 1,
> +	LPAIF_RDMA_CHAN_PCM1		= 2,
> +
> +	LPAIF_RDMA_CHAN_MAX		= 4,
> +	LPAIF_RDMA_CHAN_NUM		= 5,
> +};

...and here can be SOC-specific.  Should move them to the SOC-specific
files.

> diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h
> index 5c99b3d..5bd2a90 100644
> --- a/sound/soc/qcom/lpass.h
> +++ b/sound/soc/qcom/lpass.h

>  /* register the platform driver from the CPU DAI driver */
>  int asoc_qcom_lpass_platform_register(struct platform_device *);
> +int lpass_cpu_platform_remove(struct platform_device *pdev);
> +int lpass_cpu_platform_probe(struct platform_device *pdev);
> +int lpass_cpu_dai_probe(struct snd_soc_dai *dai);
> +extern struct snd_soc_dai_ops lpass_cpu_dai_ops;

Prefix with asoc_qcom_ to reduce chance of collisions.

-- 
Kenneth Westfield
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, 
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux