Re: [RFC PATCH 03/14] ASoC: qcom: move ipq806x specific bits out of lpass driver.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 03/05/15 00:57, Kenneth Westfield wrote:
On Thu, Apr 30, 2015 at 06:16:53PM +0100, Srinivas Kandagatla wrote:
This patch tries to make the lpass driver more generic by moving the
ipq806x specific bits out of the cpu and platform driver, also allows the
SOC specific drivers to add the correct register offsets.

This patch also renames the register definition header file into more
generic header file.

diff --git a/sound/soc/qcom/lpass-ipq806x.c b/sound/soc/qcom/lpass-ipq806x.c
new file mode 100644
index 0000000..8e9a427
--- /dev/null
+++ b/sound/soc/qcom/lpass-ipq806x.c

+static const struct of_device_id ipq806x_lpass_cpu_device_id[] = {
+	{ .compatible = "qcom,lpass-cpu", .data = &ipq806x_data },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ipq806x_lpass_cpu_device_id);

Surround with #ifdef CONFIG_OF?

I was more of thinking adding "depends OF" in Kconfig.
Is there any possibility that the driver would support non-DT?


diff --git a/sound/soc/qcom/lpass-lpaif-reg.h b/sound/soc/qcom/lpass-lpaif-reg.h
new file mode 100644
index 0000000..5541b14
--- /dev/null
+++ b/sound/soc/qcom/lpass-lpaif-reg.h

+#define LPAIF_I2SCTL_REG_ADDR(v, addr, port) \
+	(v->i2sctrl_reg_base + (addr) + v->i2sctrl_reg_stride * (port))

Could all of these variant-related macros be eliminated by using the
regmap_fields_* accessor functions, instead of the regmap_* functions?
Possible, I will give it a try.


+enum lpaif_i2s_ports {
+	LPAIF_I2S_PORT_MIN		= 0,
+
+	LPAIF_I2S_PORT_CODEC_SPK	= 0,
+	LPAIF_I2S_PORT_CODEC_MIC	= 1,
+	LPAIF_I2S_PORT_SEC_SPK		= 2,
+	LPAIF_I2S_PORT_SEC_MIC		= 3,
+	LPAIF_I2S_PORT_MI2S		= 4,
+
+	LPAIF_I2S_PORT_MAX		= 4,
+	LPAIF_I2S_PORT_NUM		= 5,
+};

These port mappings here...

+enum lpaif_irq_ports {
+	LPAIF_IRQ_PORT_MIN		= 0,
+
+	LPAIF_IRQ_PORT_HOST		= 0,
+	LPAIF_IRQ_PORT_ADSP		= 1,
+
+	LPAIF_IRQ_PORT_MAX		= 2,
+	LPAIF_IRQ_PORT_NUM		= 3,
+};

...here...

+enum lpaif_dma_channels {
+	LPAIF_RDMA_CHAN_MIN		= 0,
+
+	LPAIF_RDMA_CHAN_MI2S		= 0,
+	LPAIF_RDMA_CHAN_PCM0		= 1,
+	LPAIF_RDMA_CHAN_PCM1		= 2,
+
+	LPAIF_RDMA_CHAN_MAX		= 4,
+	LPAIF_RDMA_CHAN_NUM		= 5,
+};

...and here can be SOC-specific.  Should move them to the SOC-specific
files.
Yes, I agree, i will move them to soc specific header file.


diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h
index 5c99b3d..5bd2a90 100644
--- a/sound/soc/qcom/lpass.h
+++ b/sound/soc/qcom/lpass.h

  /* register the platform driver from the CPU DAI driver */
  int asoc_qcom_lpass_platform_register(struct platform_device *);
+int lpass_cpu_platform_remove(struct platform_device *pdev);
+int lpass_cpu_platform_probe(struct platform_device *pdev);
+int lpass_cpu_dai_probe(struct snd_soc_dai *dai);
+extern struct snd_soc_dai_ops lpass_cpu_dai_ops;

Prefix with asoc_qcom_ to reduce chance of collisions.

Sounds sensible, Will fix it in next version.

--srini
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux