[PATCH 03/11] arm64: dts: qcom: sc8280xp-crd: use just "port" in panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:

  sc8280xp-crd.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index d7b537284990..6b4e1541ee39 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -413,11 +413,9 @@ panel {
 
 			backlight = <&backlight>;
 
-			ports {
-				port {
-					edp_panel_in: endpoint {
-						remote-endpoint = <&mdss0_dp3_out>;
-					};
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss0_dp3_out>;
 				};
 			};
 		};
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux