The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
sc8280xp-lenovo-thinkpad-x13s.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 0e7aa7bd9a2c..27371d4c186e 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -553,11 +553,9 @@ panel {
backlight = <&backlight>;
power-supply = <&vreg_edp_3p3>;
- ports {
- port {
- edp_panel_in: endpoint {
- remote-endpoint = <&mdss0_dp3_out>;
- };
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss0_dp3_out>;
};
};
};
--
2.34.1
