On Sun, Mar 19, 2023 at 12:45:13PM +0100, Krzysztof Kozlowski wrote: > On 18/03/2023 13:18, Bryan O'Donoghue wrote: > > port is required to instantiate a remote-endpoint which can receive > > orientation-switch messages from a Type-C mux. > > > > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> > > --- > > .../bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml | 6 ++++++ > > 1 file changed, 6 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml > > index 52886cdb0e506..1c887e34b1223 100644 > > --- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml > > +++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml > > @@ -65,6 +65,12 @@ properties: > > description: Flag the port as possible handler of orientation switching > > type: boolean > > > > + port: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: > > + A port node to link the PHY to a TypeC controller for the purpose of > > + handling altmode muxing and orientation switching. > > Please extend the example as well. > > Don't you have there two ports? USB and DP? Or 3: USB, DP, and connector. Please make sure this all aligns with what Bjorn and I discussed recently. It was for glink specifically. Rob
