Re: [PATCH v4 04/18] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add port as an optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/03/2023 13:18, Bryan O'Donoghue wrote:
> port is required to instantiate a remote-endpoint which can receive
> orientation-switch messages from a Type-C mux.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
>  .../bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml           | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
> index 52886cdb0e506..1c887e34b1223 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
> @@ -65,6 +65,12 @@ properties:
>      description: Flag the port as possible handler of orientation switching
>      type: boolean
>  
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    description:
> +      A port node to link the PHY to a TypeC controller for the purpose of
> +      handling altmode muxing and orientation switching.

Please extend the example as well.

Don't you have there two ports? USB and DP?

Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux