On 24.01.2023 20:23, Andrew Halaney wrote:
> Some of the pinctrl groups were invalid for the selected pins. Select
> the proper qup group to fix these warnings:
>
> [ 6.523566] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio135" for function "qup15"
> [ 6.535042] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio136" for function "qup15"
> [ 6.597536] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio158" for function "qup15"
> [ 6.597544] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio159" for function "qup15"
> [ 6.597991] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio0" for function "qup15"
> [ 6.597996] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio1" for function "qup15"
>
> Fixes: e073899ec3e1 ("arm64: dts: qcom: sa8540p-ride: add i2c nodes")
> Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
> ---
This matches the pinctrl .c driver.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> index eacc1764255b..cb9fbdeb5a9e 100644
> --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> @@ -318,21 +318,21 @@ &xo_board_clk {
> &tlmm {
> i2c0_default: i2c0-default-state {
> pins = "gpio135", "gpio136";
> - function = "qup15";
> + function = "qup0";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> i2c1_default: i2c1-default-state {
> pins = "gpio158", "gpio159";
> - function = "qup15";
> + function = "qup1";
> drive-strength = <2>;
> bias-pull-up;
> };
>
> i2c12_default: i2c12-default-state {
> pins = "gpio0", "gpio1";
> - function = "qup15";
> + function = "qup12";
> drive-strength = <2>;
> bias-pull-up;
> };
