Some of the pinctrl groups were invalid for the selected pins. Select
the proper qup group to fix these warnings:
[ 6.523566] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio135" for function "qup15"
[ 6.535042] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio136" for function "qup15"
[ 6.597536] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio158" for function "qup15"
[ 6.597544] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio159" for function "qup15"
[ 6.597991] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio0" for function "qup15"
[ 6.597996] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio1" for function "qup15"
Fixes: e073899ec3e1 ("arm64: dts: qcom: sa8540p-ride: add i2c nodes")
Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index eacc1764255b..cb9fbdeb5a9e 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -318,21 +318,21 @@ &xo_board_clk {
&tlmm {
i2c0_default: i2c0-default-state {
pins = "gpio135", "gpio136";
- function = "qup15";
+ function = "qup0";
drive-strength = <2>;
bias-pull-up;
};
i2c1_default: i2c1-default-state {
pins = "gpio158", "gpio159";
- function = "qup15";
+ function = "qup1";
drive-strength = <2>;
bias-pull-up;
};
i2c12_default: i2c12-default-state {
pins = "gpio0", "gpio1";
- function = "qup15";
+ function = "qup12";
drive-strength = <2>;
bias-pull-up;
};
--
2.39.0
