This series provides stability fixes for the MSM8996 boot process. It changes the order of calls during the CPU PLL setup, makes it use GPLL0 (through sys_apcs_aux) during PLL init, finetunes the ACD, etc. Dependencies: [1], [2] [1] https://lore.kernel.org/linux-arm-msm/20230111191453.2509468-1-dmitry.baryshkov@xxxxxxxxxx/ [2] https://lore.kernel.org/linux-arm-msm/20230111191634.2509616-1-dmitry.baryshkov@xxxxxxxxxx/ Changes since v1: - Included bindings update Dmitry Baryshkov (14): dt-bindings: clock: qcom,msm8996-apcc: add sys_apcs_aux clock clk: qcom: clk-alpha-pll: program PLL_TEST/PLL_TEST_U if required clk: qcom: cpu-8996: correct PLL programming clk: qcom: cpu-8996: fix the init clock rate clk: qcom: cpu-8996: support using GPLL0 as SMUX input clk: qcom: cpu-8996: skip ACD init if the setup is valid clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb clk: qcom: cpu-8996: setup PLLs before registering clocks clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call clk: qcom: cpu-8996: fix PLL configuration sequence clk: qcom: cpu-8996: fix ACD initialization clk: qcom: cpu-8996: fix PLL clock ops clk: qcom: cpu-8996: change setup sequence to follow vendor kernel arm64: dts: qcom: msm8996: support using GPLL0 as kryocc input .../bindings/clock/qcom,msm8996-apcc.yaml | 6 +- arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 +- drivers/clk/qcom/clk-alpha-pll.c | 5 + drivers/clk/qcom/clk-cpu-8996.c | 145 +++++++++++++----- 4 files changed, 115 insertions(+), 45 deletions(-) -- 2.30.2
