On 02/23/15 09:55, Srinivas Kandagatla wrote:
> From: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
>
> This patch adds USB OTG support on USB1 for Compulab QS-600 Board.
>
> Signed-off-by: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
Acked-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> index af2e075..6349f24 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> @@ -41,6 +41,11 @@
> };
> };
>
> + /* OTG */
> + usb1_phy:phy@12500000 {
> + status = "ok";
> + };
> +
> usb3_phy:phy@12520000 {
> status = "ok";
> };
> @@ -48,7 +53,16 @@
> usb4_phy:phy@12530000 {
> status = "ok";
> };
> -
> +
> + gadget1:gadget@12500000 {
> + status = "ok";
> + };
> +
> + /* OTG */
> + usb1: usb@12500000 {
> + status = "ok";
> + };
> +
> usb3: usb@12520000 {
> status = "ok";
> };
>
--
Regards,
Igor.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
