On Tue, Dec 13, 2022 at 04:32:43PM +0100, Johan Hovold wrote: > On Tue, Dec 13, 2022 at 04:29:04PM +0100, Konrad Dybcio wrote: > > On 13.12.2022 16:17, Johan Hovold wrote: > > > It appears sc8280xp is the only qcom platform using a qup prefix (even > > > if some older platform use a blsp equivalent), and we're not even using > > > it consistently as we, for example, have both > > > > > > qup2_uart17, and > > > qup2_i2c5 > > > > > > (where the former should have been qup2_uart1). > > > > > > So either we fix up the current labels or just drop the qup prefixes and > > > use a flat naming scheme (e.g. uart17 and i2c21). > > > Oh, I didn't notice that! I suppose sticking with i2cN as we've been > > doing ever since i2c-geni was introduced sounds like the best option.. > > Yeah, sounds good to me. This makes sense and I'll fix up the existing geni nodes and my new nodes in v2. I noticed another inconsistency with sc8280xp.dtsi compared to other platforms. I left off all of the pin mappings in sc8280xp.dtsi and added them to the sa8540-ride.dts file since the existing sc8280xp.dtsi file contains no pin mappings. Other platforms such as sm8450.dtsi, sm8350.dtsi, and sm8250.dtsi contain the geni pin mappings. My understanding is that these geni pins are fixed within the SoC and don't change with the different boards. Should I also add the geni pin mappings to sc8280xp.dtsi? Brian
