According to the downstream 5.4 kernel sources for the sa8540p,
i2c@894000 is labeled i2c bus 21, not 5. The interrupts and clocks
also match. Let's go ahead and correct the name that's used in the
three files where this is listed.
Signed-off-by: Brian Masney <bmasney@xxxxxxxxxx>
Fixes: 152d1faf1e2f3 ("arm64: dts: qcom: add SC8280XP platform")
Fixes: ccd3517faf183 ("arm64: dts: qcom: sc8280xp: Add reference device")
Fixes: 32c231385ed43 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
---
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 6 +++---
arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 6 +++---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +-
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 551768f97729..1ab76724144d 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -326,11 +326,11 @@ &qup2 {
status = "okay";
};
-&qup2_i2c5 {
+&qup2_i2c21 {
clock-frequency = <400000>;
pinctrl-names = "default";
- pinctrl-0 = <&qup2_i2c5_default>;
+ pinctrl-0 = <&qup2_i2c21_default>;
status = "okay";
@@ -598,7 +598,7 @@ qup0_i2c4_default: qup0-i2c4-default-state {
drive-strength = <16>;
};
- qup2_i2c5_default: qup2-i2c5-default-state {
+ qup2_i2c21_default: qup2-i2c21-default-state {
pins = "gpio81", "gpio82";
function = "qup21";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 568c6be1ceaa..284adf60386a 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -531,11 +531,11 @@ &qup2 {
status = "okay";
};
-&qup2_i2c5 {
+&qup2_i2c21 {
clock-frequency = <400000>;
pinctrl-names = "default";
- pinctrl-0 = <&qup2_i2c5_default>;
+ pinctrl-0 = <&qup2_i2c21_default>;
status = "okay";
@@ -801,7 +801,7 @@ qup0_i2c4_default: qup0-i2c4-default-state {
drive-strength = <16>;
};
- qup2_i2c5_default: qup2-i2c5-default-state {
+ qup2_i2c21_default: qup2-i2c21-default-state {
pins = "gpio81", "gpio82";
function = "qup21";
bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 109c9d2b684d..875cc91324ce 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -827,7 +827,7 @@ qup2_uart17: serial@884000 {
status = "disabled";
};
- qup2_i2c5: i2c@894000 {
+ qup2_i2c21: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
--
2.38.1
