Add support for the NAND controller driver for SoC's that contain EBI2. For now, the only SoC upstream that has EBI2 is IPQ806x. The patchset requires the ADM dmaengine patches posted by Andy: http://thread.gmane.org/gmane.linux.ports.arm.msm/11136 Archit Taneja (5): clk: qcom: Add EBI2 clocks for IPQ806x mtd: nand: Add qcom nand controller driver Documentaion: dt: add DT bindings for Qualcomm NAND controller arm: qcom: dts: Add NAND controller node for ipq806x arm: qcom: dts: Enale NAND node on IPQ8064 AP148 pplatform .../devicetree/bindings/mtd/qcom_nandc.txt | 48 + arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 32 + arch/arm/boot/dts/qcom-ipq8064.dtsi | 19 +- drivers/clk/qcom/gcc-ipq806x.c | 34 + drivers/mtd/nand/Kconfig | 7 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/qcom_nandc.c | 1995 ++++++++++++++++++++ include/dt-bindings/clock/qcom,gcc-ipq806x.h | 1 + 8 files changed, 2136 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt create mode 100644 drivers/mtd/nand/qcom_nandc.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
