[PATCH 1/3] dt-bindings: phy: qcom,usb-snps-femto-v2: Add phy override params bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for overriding SNPS phy tuning parameters in device tree
bindings.

Signed-off-by: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
---
 .../devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml  | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index 0dfe691..44cf3bf 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -50,6 +50,22 @@ properties:
   vdda33-supply:
     description: phandle to the regulator 3.3V supply node.
 
+  qcom,override_x0:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Override value for hs disconnect and squelch detector threshold.
+
+  qcom,override_x1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Override value for hs amplitude, pre-emphasis duration and amplitude.
+
+  qcom,override_x2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Override value for hs rise/fall time, cross over voltage, output impedance.
+
+  qcom,override_x3:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Override value for ls/fs output impedance.
+
 required:
   - compatible
   - reg
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux