Re: [RFC/PATCH 2/7] iommu-api: Add map_range/unmap_range functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jul 10, 2014 at 6:43 PM, Olav Haugan <ohaugan@xxxxxxxxxxxxxx> wrote:
> On 7/9/2014 5:40 PM, Rob Clark wrote:
>> On Wed, Jul 9, 2014 at 8:03 PM, Olav Haugan <ohaugan@xxxxxxxxxxxxxx> wrote:
>>> On 7/8/2014 4:49 PM, Rob Clark wrote:
>>>> On Tue, Jul 8, 2014 at 5:53 PM, Olav Haugan <ohaugan@xxxxxxxxxxxxxx> wrote:
>>>>> Hi Hiroshi,
>>>>>
>>>>> On 7/3/2014 9:29 PM, Hiroshi Doyu wrote:
>>>>>> Hi Olav,
>>>>>>
>>>>>> Olav Haugan <ohaugan@xxxxxxxxxxxxxx> writes:
>>>>>>
>>>>>>> Mapping and unmapping are more often than not in the critical path.
>>>>>>> map_range and unmap_range allows SMMU driver implementations to optimize
>>>>>>> the process of mapping and unmapping buffers into the SMMU page tables.
>>>>>>> Instead of mapping one physical address, do TLB operation (expensive),
>>>>>>> mapping, do TLB operation, mapping, do TLB operation the driver can map
>>>>>>> a scatter-gatherlist of physically contiguous pages into one virtual
>>>>>>> address space and then at the end do one TLB operation.
>>>>>>>
>>>>>>> Additionally, the mapping operation would be faster in general since
>>>>>>> clients does not have to keep calling map API over and over again for
>>>>>>> each physically contiguous chunk of memory that needs to be mapped to a
>>>>>>> virtually contiguous region.
>>>>>>>
>>>>>>> Signed-off-by: Olav Haugan <ohaugan@xxxxxxxxxxxxxx>
>>>>>>> ---
>>>>>>>  drivers/iommu/iommu.c | 24 ++++++++++++++++++++++++
>>>>>>>  include/linux/iommu.h | 24 ++++++++++++++++++++++++
>>>>>>>  2 files changed, 48 insertions(+)
>>>>>>>
>>>>>>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>>>>>>> index e5555fc..f2a6b80 100644
>>>>>>> --- a/drivers/iommu/iommu.c
>>>>>>> +++ b/drivers/iommu/iommu.c
>>>>>>> @@ -898,6 +898,30 @@ size_t iommu_unmap(struct iommu_domain *domain, unsigned long iova, size_t size)
>>>>>>>  EXPORT_SYMBOL_GPL(iommu_unmap);
>>>>>>>
>>>>>>>
>>>>>>> +int iommu_map_range(struct iommu_domain *domain, unsigned int iova,
>>>>>>> +                struct scatterlist *sg, unsigned int len, int prot)
>>>>>>> +{
>>>>>>> +    if (unlikely(domain->ops->map_range == NULL))
>>>>>>> +            return -ENODEV;
>>>>>>> +
>>>>>>> +    BUG_ON(iova & (~PAGE_MASK));
>>>>>>> +
>>>>>>> +    return domain->ops->map_range(domain, iova, sg, len, prot);
>>>>>>> +}
>>>>>>> +EXPORT_SYMBOL_GPL(iommu_map_range);
>>>>>>
>>>>>> We have the similar one internally, which is named, "iommu_map_sg()",
>>>>>> called from DMA API.
>>>>>
>>>>> Great, so this new API will be useful to more people!
>>>>>
>>>>>>> +int iommu_unmap_range(struct iommu_domain *domain, unsigned int iova,
>>>>>>> +                  unsigned int len)
>>>>>>> +{
>>>>>>> +    if (unlikely(domain->ops->unmap_range == NULL))
>>>>>>> +            return -ENODEV;
>>>>>>> +
>>>>>>> +    BUG_ON(iova & (~PAGE_MASK));
>>>>>>> +
>>>>>>> +    return domain->ops->unmap_range(domain, iova, len);
>>>>>>> +}
>>>>>>> +EXPORT_SYMBOL_GPL(iommu_unmap_range);
>>>>>>
>>>>>> Can the existing iommu_unmap() do the same?
>>>>>
>>>>> I believe iommu_unmap() behaves a bit differently because it will keep
>>>>> on calling domain->ops->unmap() until everything is unmapped instead of
>>>>> letting the iommu implementation take care of unmapping everything in
>>>>> one call.
>>>>>
>>>>> I am abandoning the patch series since our driver was not accepted.
>>>>> However, if there are no objections I will resubmit this patch (PATCH
>>>>> 2/7) as an independent patch to add this new map_range API.
>>>>
>>>> +1 for map_range().. I've seen for gpu workloads, at least, it is the
>>>> downstream map_range() API is quite beneficial.   It was worth at
>>>> least a few fps in xonotic.
>>>>
>>>> And, possibly getting off the subject a bit, but I was wondering about
>>>> the possibility of going one step further and batching up mapping
>>>> and/or unmapping multiple buffers (ranges) at once.  I have a pretty
>>>> convenient sync point in drm/msm to flush out multiple mappings before
>>>> kicking gpu.
>>>
>>> I think you should be able to do that with this API already - at least
>>> the mapping part since we are passing in a sg list (this could be a
>>> chained sglist).
>>
>> What I mean by batching up is mapping and unmapping multiple sglists
>> each at different iova's with minmal cpu cache and iommu tlb flushes..
>>
>> Ideally we'd let the IOMMU driver be clever and build out all 2nd
>> level tables before inserting into first level tables (to minimize cpu
>> cache flushing).. also, there is probably a reasonable chance that
>> we'd be mapping a new buffer into existing location, so there might be
>> some potential to reuse existing 2nd level tables (and save a tiny bit
>> of free/alloc).  I've not thought too much about how that would look
>> in code.. might be kinda, umm, fun..
>>
>> But at an API level, we should be able to do a bunch of
>> map/unmap_range's with one flush.
>>
>> Maybe it could look like a sequence of iommu_{map,unmap}_range()
>> followed by iommu_flush()?
>>
>
> So we could add another argument ("options") in the range api that
> allows you to indicate whether you want to invalidate TLB or not.

sounds reasonable.. I'm pretty sure we want explict-flush to be an
opt-in behaviour.

BR,
-R

> Thanks,
>
> Olav
>
> --
> The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux