Re: [PATCH v3 1/3] soc: devicetree: bindings: Add Qualcomm RPM DT binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/18/14 01:34, Srinivas Kandagatla wrote:
>
>
> On 18/06/14 00:59, Stephen Boyd wrote:
>> On 06/16/14 11:46, Bjorn Andersson wrote:
>>> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
>>> b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
>>> new file mode 100644
>>> index 0000000..0366533
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.txt
>>> @@ -0,0 +1,260 @@
>>> +Qualcomm Resource Power Manager (RPM)
>>> +
>> [...]
>>> +
>>> +- reg:
>>> +    Usage: required
>>> +    Value type: <prop-encoded-array>
>>> +    Definition: two entries specifying the RPM's message ram and
>>> ipc register
>>> +
>>> +- reg-names:
>>> +    Usage: required
>>> +    Value type: <string-array>
>>> +    Definition: must contain the following, in order:
>>> +            "msg_ram"
>>> +            "ipc"
>>
>> ipc is concerning....
>>
>>> +    rpm@108000 {
>>> +        compatible = "qcom,rpm-msm8960";
>>> +        reg = <0x108000 0x1000 0x2011008 0x4>;
>>> +
>>
>> (reg-names is missing from the example)
>>
>> because ipc is actually a register inside the Krait complex's global
>> clock control/distribution hardware block (it's located at 0x2011000).
>>  From what I can tell, this is the only non-clock/power register inside
>> there. I plan to send out a driver for this hardware block so that I can
>> switch the L2 aux source mux over to PLL8 instead of PXO (done with a
>> single register write to 0x2011028) and this mapping/use here is going
>> to conflict with that unless I only map the single register like is done
>> here.
>>
>> I wonder if we'd be better off making this region a separate node and
>> having some phandle to it here in the RPM node? That way we have a
>
> Can't we use syscon based on regmap here?  syscon is a better way to
> share a common register space across multiple drivers.

How would the mux clock be registered? I'd like it to be registered by
the driver associated with this device with something like
devm_clk_register(). From what I can tell syscon wouldn't allow that
unless we extend the syscon driver to handle more specific compatible
strings.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux