Re: [PATCH] usb: phy: msm: Select secondary PHY via TCSR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 21, 2014 at 10:03:28AM -0700, Tim Bird wrote:
> On Mon, Apr 21, 2014 at 9:14 AM, Felipe Balbi <balbi@xxxxxx> wrote:
> > Hi,
> >
> > On Fri, Apr 04, 2014 at 03:18:11PM -0700, Tim Bird wrote:
> >> Select the secondary PHY using the TCSR register, if phy-num=1
> >> in the DTS (or phy_number is set in the platform data).  The
> >> SOC has 2 PHYs which can be used with the OTG port, and this
> >> code allows configuring the correct one.
> >>
> >> Note: This resolves the problem I was seeing where I couldn't
> >> get the USB driver working at all on a dragonboard, from cold
> >> boot.  This patch depends on patch 5/14 from Ivan's msm USB
> >> patch set.  It does not use DT for the register address, as
> >> there's no evidence that this address changes between SoC
> >> versions.
> >>
> >> Signed-off-by: Tim Bird <tim.bird@xxxxxxxxxxxxxx>
> >
> > doesn't apply:
> >
> > checking file drivers/usb/phy/phy-msm-usb.c
> > Hunk #1 succeeded at 1412 with fuzz 2 (offset -106 lines).
> > Hunk #2 FAILED at 1581.
> > 1 out of 2 hunks FAILED
> > checking file include/linux/usb/msm_hsusb_hw.h
> 
> Sorry about that.
> 
> Did you apply this on top of Ivan's USB patch set?  That's a pre-requisite.

hehe, probably not :-)

> I've communicated privately with Ivan, and he's preparing an updated
> patch set which incorporates this fix and a few other things. This should
> be showing up soon-ish.

alright, thanks

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux