Re: [PATCH] usb: phy: msm: Select secondary PHY via TCSR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Fri, Apr 04, 2014 at 03:18:11PM -0700, Tim Bird wrote:
> Select the secondary PHY using the TCSR register, if phy-num=1
> in the DTS (or phy_number is set in the platform data).  The
> SOC has 2 PHYs which can be used with the OTG port, and this
> code allows configuring the correct one.
> 
> Note: This resolves the problem I was seeing where I couldn't
> get the USB driver working at all on a dragonboard, from cold
> boot.  This patch depends on patch 5/14 from Ivan's msm USB
> patch set.  It does not use DT for the register address, as
> there's no evidence that this address changes between SoC
> versions.
> 
> Signed-off-by: Tim Bird <tim.bird@xxxxxxxxxxxxxx>

doesn't apply:

checking file drivers/usb/phy/phy-msm-usb.c
Hunk #1 succeeded at 1412 with fuzz 2 (offset -106 lines).
Hunk #2 FAILED at 1581.
1 out of 2 hunks FAILED
checking file include/linux/usb/msm_hsusb_hw.h

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux