From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
.../devicetree/bindings/usb/msm-hsusb.txt | 9 ++++++
drivers/usb/phy/phy-msm-usb.c | 30 ++++++++++++++------
include/linux/usb/msm_hsusb.h | 3 ++
3 files changed, 34 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
index f1045e3..3f21204 100644
--- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
+++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -57,6 +57,12 @@ Required properties:
- v1p8-supply: phandle to the regulator for the 1.8V supply
- v3p3-supply: phandle to the regulator for the 3.3V supply
+- resets: A list of phandle + reset-specifier pairs for the
+ resets listed in reset-names
+- reset-names: Should contain the following:
+ "phy" USB PHY controller reset
+ "link" USB LINK controller reset
+
- qcom,otg-control: OTG control (VBUS and ID notifications) can be one of
1 - PHY control
2 - PMIC control
@@ -83,6 +89,9 @@ Example HSUSB OTG controller device node:
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
+ resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>;
+ reset-names = "phy", "link";
+
qcom,otg-control = <1>;
qcom,phy-init-sequence = <0x01 0x90 0xffffffff>;
};
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index cc230c8..53fc645 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -32,6 +32,7 @@
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/reset.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
@@ -260,12 +261,16 @@ static void ulpi_init(struct msm_otg *motg)
static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
{
- int ret = 0;
+ int ret;
- if (!motg->pdata->link_clk_reset)
- return ret;
+ if (motg->pdata->link_clk_reset)
+ ret = motg->pdata->link_clk_reset(motg->clk, assert);
+ else
+ if (assert)
+ ret = reset_control_assert(motg->link_rst);
+ else
+ ret = reset_control_deassert(motg->link_rst);
- ret = motg->pdata->link_clk_reset(motg->clk, assert);
if (ret)
dev_err(motg->phy.dev, "usb link clk reset %s failed\n",
assert ? "assert" : "deassert");
@@ -275,12 +280,13 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
static int msm_otg_phy_clk_reset(struct msm_otg *motg)
{
- int ret = 0;
+ int ret;
- if (!motg->pdata->phy_clk_reset)
- return ret;
+ if (motg->pdata->phy_clk_reset)
+ ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
+ else
+ ret = reset_control_reset(motg->phy_rst);
- ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
if (ret)
dev_err(motg->phy.dev, "usb phy clk reset failed\n");
@@ -1373,6 +1379,14 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
id = of_match_device(msm_otg_dt_match, &pdev->dev);
pdata->phy_type = (int) id->data;
+ motg->link_rst = devm_reset_control_get(&pdev->dev, "link");
+ if (IS_ERR(motg->link_rst))
+ return PTR_ERR(motg->link_rst);
+
+ motg->phy_rst = devm_reset_control_get(&pdev->dev, "phy");
+ if (IS_ERR(motg->phy_rst))
+ return PTR_ERR(motg->phy_rst);
+
pdata->mode = of_usb_get_dr_mode(node);
if (pdata->mode == USB_DR_MODE_UNKNOWN)
pdata->mode = USB_DR_MODE_OTG;
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 262ed80..9bf8943 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -163,6 +163,9 @@ struct msm_otg {
struct regulator *v3p3;
struct regulator *v1p8;
struct regulator *vddcx;
+
+ struct reset_control *phy_rst;
+ struct reset_control *link_rst;
};
#endif
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
