Re: [PATCH v4 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Aug 22, 2013 at 09:24:49PM +0000, Paul Zimmerman wrote:
> > From: Ivan T. Ivanov [mailto:iivanov@xxxxxxxxxx]
> > Sent: Tuesday, August 20, 2013 8:26 AM
> > 
> > On Tue, 2013-08-20 at 10:01 -0500, Kumar Gala wrote:
> > > On Aug 20, 2013, at 9:54 AM, Ivan T. Ivanov wrote:
> > >
> > > >
> > > > Hi,
> > > >
> > > > On Tue, 2013-08-20 at 09:33 -0500, Felipe Balbi wrote:
> > > >> On Tue, Aug 20, 2013 at 05:09:11PM +0300, Ivan T. Ivanov wrote:
> > > >>>
> > > >>> On Tue, 2013-08-20 at 08:37 -0500, Felipe Balbi wrote:
> > > >>>>
> > > >>>> On Tue, Aug 20, 2013 at 04:32:23PM +0300, Ivan T. Ivanov wrote:
> > > >>>>>
> > > >>>>> I think they are SNPS DesignWare PHY's, additionally
> > > >>>>> wrapped with Qualcomm logic. I could substitute "dwc3"
> > > >>>>> with just "dw", which will be more correct.
> > > >>>>
> > > >>>> alright, thank you. Let's add Paul to the loop since he might have very
> > > >>>> good insight in the synopsys PHYs.
> > > >>>>
> > > >>>> mental note: if any other platform shows up with Synopsys PHY, ask them
> > > >>>> to use this driver instead :-)
> > > >>>
> > > >>> I really doubt that this will bi possible. Control of the PHY's is
> > > >>> not directly trough ULPI, UTMI or PIPE3 interfaces, but trough
> > > >>> QSCRATCH registers, which of course is highly Qualcomm specific.
> > > >>
> > > >> isn't it a memory mapped IP ? doesn't synopsys provide their own set of
> > > >> registers ?
> > > >
> > > > From what I see it is not directly mapped. How QSCRATCH write and
> > > > reads transactions are translated to DW IP is unclear to me.
> > >
> > >
> > > I think the question is how does SW access them?
> > 
> > "USB QSCRATCH Hardware registers" don't ask me what is this :-)
> > or like Pawel says: "it depends on the SOC" .
> 
> To answer the question "doesn't synopsys provide their own set of
> registers", we provide registers in our USB cores to access the PHYs
> through I2C, ULPI/UTMI, or PIPE3 interfaces. But if someone wants to use
> our PHY with some other controller that doesn't provide that, then they
> may need to implement their own register set, as Qualcomm has apparently
> done.

thanks for clarifying. that pretty much hinders writing any sort of
generic drivers for Synopsys' PHYs though :-s

But I guess that's alright.

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux