Re: [PATCH v4 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Aug 20, 2013, at 9:54 AM, Ivan T. Ivanov wrote:

> 
> Hi, 
> 
> On Tue, 2013-08-20 at 09:33 -0500, Felipe Balbi wrote: 
>> On Tue, Aug 20, 2013 at 05:09:11PM +0300, Ivan T. Ivanov wrote:
>>> Hi,
>>> 
>>> On Tue, 2013-08-20 at 08:37 -0500, Felipe Balbi wrote: 
>>>> Hi,
>>>> 
>>>> On Tue, Aug 20, 2013 at 04:32:23PM +0300, Ivan T. Ivanov wrote:
>>>>>> On Tue, Aug 20, 2013 at 12:56:04PM +0300, Ivan T. Ivanov wrote:
>>>>>>> From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
>>>>>>> 
>>>>>>> These drivers handles control and configuration of the HS
>>>>>>> and SS USB PHY transceivers. They are part of the driver
>>>>>>> which manage Synopsys DesignWare USB3 controller stack
>>>>>>> inside Qualcomm SoC's.
>>>>>>> 
>>>>>>> Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
>>>>>>> ---
>>>>>>> drivers/usb/phy/Kconfig           |   11 ++
>>>>>>> drivers/usb/phy/Makefile          |    2 +
>>>>>>> drivers/usb/phy/phy-msm-dwc3-hs.c |  327 ++++++++++++++++++++++++++++++++
>>>>>>> drivers/usb/phy/phy-msm-dwc3-ss.c |  374 +++++++++++++++++++++++++++++++++++++
>>>>>> 
>>>>>> please rename these PHY drivers, they have nothing to do with DWC3. PHYs
>>>>>> don't care about the USB controller.
>>>>> 
>>>>> I think they are SNPS DesignWare PHY's, additionally
>>>>> wrapped with Qualcomm logic. I could substitute "dwc3"
>>>>> with just "dw", which will be more correct.
>>>> 
>>>> alright, thank you. Let's add Paul to the loop since he might have very
>>>> good insight in the synopsys PHYs.
>>>> 
>>>> mental note: if any other platform shows up with Synopsys PHY, ask them
>>>> to use this driver instead :-)
>>> 
>>> I really doubt that this will bi possible. Control of the PHY's is
>>> not directly trough ULPI, UTMI or PIPE3 interfaces, but trough
>>> QSCRATCH registers, which of course is highly Qualcomm specific.
>> 
>> isn't it a memory mapped IP ? doesn't synopsys provide their own set of
>> registers ?
> 
> From what I see it is not directly mapped. How QSCRATCH write and
> reads transactions are translated to DW IP is unclear to me.


I think the question is how does SW access them?

- k

-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux