Interrupts specified through an "Interrupt" ACPI resource (versus through a "GpioInt" resource) are now always assumed to be active low. When this change was originally made the Thinkpad 8 quirk was kept around because it was uncertain if the Thinkpad 8 uses an "Interrupt" or a "GpioInt" resource. Bug https://bugzilla.kernel.org/show_bug.cgi?id=196701 has a DSDT for the Thinkpad 8 attached and it uses an "Interrupt" resource, so the quirk is not necessary and the quirk, as well as the irq-active-low quirk handling code can be removed. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/bluetooth/hci_bcm.c | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index c937a0600f0f..3cd11b59b533 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -809,18 +809,6 @@ static const struct dmi_system_id bcm_broken_irq_dmi_table[] = { }; #ifdef CONFIG_ACPI -/* IRQ polarity of some chipsets are not defined correctly in ACPI table. */ -static const struct dmi_system_id bcm_active_low_irq_dmi_table[] = { - { /* Handle ThinkPad 8 tablets with BCM2E55 chipset ACPI ID */ - .ident = "Lenovo ThinkPad 8", - .matches = { - DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 8"), - }, - }, - { } -}; - static int bcm_resource(struct acpi_resource *ares, void *data) { struct bcm_device *dev = data; @@ -967,7 +955,6 @@ static int bcm_get_resources(struct bcm_device *dev) static int bcm_acpi_probe(struct bcm_device *dev) { LIST_HEAD(resources); - const struct dmi_system_id *dmi_id; const struct acpi_gpio_mapping *gpio_mapping = acpi_bcm_int_last_gpios; struct resource_entry *entry; int ret; @@ -1014,13 +1001,6 @@ static int bcm_acpi_probe(struct bcm_device *dev) dev->irq_active_low = irq_polarity; dev_warn(dev->dev, "Overwriting IRQ polarity to active %s by module-param\n", dev->irq_active_low ? "low" : "high"); - } else { - dmi_id = dmi_first_match(bcm_active_low_irq_dmi_table); - if (dmi_id) { - dev_warn(dev->dev, "%s: Overwriting IRQ polarity to active low", - dmi_id->ident); - dev->irq_active_low = true; - } } return 0; -- 2.17.0.rc2 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
