[Resending this with linux-pci ML address corrected] Hi, When Thunderbolt host router is configured to be in native enumeration mode it is only present in the system if there is something connected to the ports. This pretty much follows how the BIOS assisted mode works. In native enumeration mode the Thunderbolt host controller (NHI) and USB host controller (xHCI) are not hot-added using native PCIe hotplug but instead they will be hotplugged via BIOS triggered ACPI Notify() to the root port. This is done to preserve resources since NHI and xHCI only need 1 MB of MMIO space and no additional buses. Currently Linux does not support this very well and ends up failing the hotplug in one way or another. More detailed explanation is in changelog of patch [4/9]. This series fixes this issue and in addition includes fixes for few other issues found during testing on a system that has Thunderbolt controller in native PCIe enumeration mode. However, the fixes here are not in any way Thunderbolt specific and should be applicable to other systems as well. The previous versions of the patch series can be found here: v3: https://www.spinics.net/lists/linux-acpi/msg80876.html v2: https://www.spinics.net/lists/linux-pci/msg69186.html v1: https://www.spinics.net/lists/linux-acpi/msg80607.html Changes from v3: - Added Andy's tag to patches [1-5] - Improved changelog and subject line of patch [1/9] to match better what it is trying to solve - Improved comment in patch [1/9] - Improved changelog of patches [2/9] and [4/9] accordingly to match better why they are needed - Added cleanup patches [6-9/9] Changes from v2: - Added Rafael's tag to patch [1/5] - Updated changelog of patch [1/5] to include more details about how the problem can be observed from dmesg and lspci output Changes from v1: - Drop 'cmax - max ?: 1' and use similar construct than we use in second pass loop in patch [1/5] - Drop unnecessary parentheses in patch [1/5] - Added Rafael's tag to patches [2-5/5] Mika Westerberg (9): PCI: Take all bridges into account when calculating bus numbers for extension PCI: Take bridge window alignment into account when distributing resources PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume ACPI / hotplug / PCI: Do not scan all bridges when native PCIe hotplug is used ACPI / hotplug / PCI: Mark stale PCI devices disconnected PCI: Move resource distribution for a single bridge outside of the loop PCI: Document return value of pci_scan_bridge() and pci_scan_bridge_extend() PCI: Improve "partially hidden behind bridge" log message ACPI / hotplug / PCI: Drop unnecessary parentheses drivers/pci/hotplug/acpiphp.h | 1 + drivers/pci/hotplug/acpiphp_glue.c | 82 ++++++++++++++++++++++++++++++-------- drivers/pci/hotplug/pciehp.h | 2 +- drivers/pci/hotplug/pciehp_core.c | 2 +- drivers/pci/hotplug/pciehp_hpc.c | 13 +++++- drivers/pci/probe.c | 33 +++++++++------ drivers/pci/setup-bus.c | 69 ++++++++++++++++++++++++++------ 7 files changed, 158 insertions(+), 44 deletions(-) -- 2.16.2 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
