[PATCH RESEND v4 4/9] ACPI / hotplug / PCI: Do not scan all bridges when native PCIe hotplug is used

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When a system is using native PCIe hotplug for Thunderbolt and the
controller is not enabled for full RTD3 (runtime D3) it will be only
present in the system when there is a device connected. This pretty much
follows the BIOS assisted hotplug behaviour.

Thunderbolt host router integrated PCIe switch has two additional PCIe
downstream bridges that lead to NHI (Thunderbolt host controller) and xHCI
(USB 3 host controller) respectively. These downstream bridges are not
marked being hotplug capable. Reason for that is to preserve resources.
Otherwise the OS would distribute remaining resources between all
downstream bridges making these two bridges consume precious resources
of the actual hotplug bridges.

Now, because these two bridges are not marked being hotplug capable the OS
will not enable hotplug interrupt for them either and will not receive
interrupt when devices behind them are hot-added. Solution to this is
that the BIOS sends ACPI Notify() to the root port let the OS know it
needs to rescan for added and/or removed devices.

Here is how the mechanism is supposed to work when a Thunderbolt
endpoint is connected to one of the ports. In case of a standard USB-C
device only the xHCI is hot-added otherwise steps are the same.

1. Initially there is only the PCIe root port that is controlled by
   the pciehp driver

  00:1b.0 (Hotplug+) --

2. Then we get native PCIe hotplug interrupt and once it is handled the
   topology looks as following

  00:1b.0 (Hotplug+) -- 01:00.0 --+- 02:00.0 --
                                  +- 02:01.0 (HotPlug+)
                                  \- 02:02.0 --

3. Bridges 02:00.0 and 02:02.0 are not marked as hotplug capable and
   they don't have anything behind them currently. Bridge 02:01.0 is
   hotplug capable and used for extending the topology. At this point
   the required PCIe devices are enabled and ACPI Notify() is sent to
   the root port. The resulting topology is expected to look like

  00:1b.0 (Hotplug+) -- 01:00.0 --+- 02:00.0 -- Thunderbolt host controller
                                  +- 02:01.0 (HotPlug+)
                                  \- 02:02.0 -- xHCI host controller

However, the current ACPI hotplug implementation scans the whole 00:1b.0
hotplug slot and everything behind it regardless whether native PCIe is
used or not, and it expects that the BIOS has configured bridge
resources upfront. If that's not the case it assigns resources using
minimal allocation (everything currently found just barely fit)
preventing future extension. In addition to that, if there is another
native PCIe hotplug going on we may find the new PCIe switch only
partially ready (all links are not fully trained yet) confusing pciehp
when it finally starts to enumerate for new devices.

To make this work better with the native PCIe hotplug driver (pciehp),
we let it handle all slot management and resource allocation for hotplug
bridges and restrict ACPI hotplug to non-hotplug bridges.

Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
 drivers/pci/hotplug/acpiphp.h      |  1 +
 drivers/pci/hotplug/acpiphp_glue.c | 73 ++++++++++++++++++++++++++++++--------
 2 files changed, 59 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index e438a2d734f2..8dcfd623ef1d 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -158,6 +158,7 @@ struct acpiphp_attention_info
 
 #define SLOT_ENABLED		(0x00000001)
 #define SLOT_IS_GOING_AWAY	(0x00000002)
+#define SLOT_IS_NATIVE		(0x00000004)
 
 /* function flags */
 
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index e2198a2feeca..43afeac7f5f3 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -282,6 +282,9 @@ static acpi_status acpiphp_add_context(acpi_handle handle, u32 lvl, void *data,
 	slot->device = device;
 	INIT_LIST_HEAD(&slot->funcs);
 
+	if (pdev && pciehp_is_native(pdev))
+		slot->flags |= SLOT_IS_NATIVE;
+
 	list_add_tail(&slot->node, &bridge->slots);
 
 	/*
@@ -291,7 +294,7 @@ static acpi_status acpiphp_add_context(acpi_handle handle, u32 lvl, void *data,
 	 * expose slots to user space in those cases.
 	 */
 	if ((acpi_pci_check_ejectable(pbus, handle) || is_dock_device(adev))
-	    && !(pdev && pdev->is_hotplug_bridge && pciehp_is_native(pdev))) {
+	    && !(slot->flags & SLOT_IS_NATIVE && pdev->is_hotplug_bridge)) {
 		unsigned long long sun;
 		int retval;
 
@@ -430,6 +433,29 @@ static int acpiphp_rescan_slot(struct acpiphp_slot *slot)
 	return pci_scan_slot(slot->bus, PCI_DEVFN(slot->device, 0));
 }
 
+static void acpiphp_native_scan_bridge(struct pci_dev *bridge)
+{
+	struct pci_bus *bus = bridge->subordinate;
+	struct pci_dev *dev;
+	int max;
+
+	if (!bus)
+		return;
+
+	max = bus->busn_res.start;
+	/* Scan already configured non-hotplug bridges */
+	for_each_pci_bridge(dev, bus) {
+		if (!dev->is_hotplug_bridge)
+			max = pci_scan_bridge(bus, dev, max, 0);
+	}
+
+	/* Scan non-hotplug bridges that need to be reconfigured */
+	for_each_pci_bridge(dev, bus) {
+		if (!dev->is_hotplug_bridge)
+			max = pci_scan_bridge(bus, dev, max, 1);
+	}
+}
+
 /**
  * enable_slot - enable, configure a slot
  * @slot: slot to be enabled
@@ -442,25 +468,42 @@ static void enable_slot(struct acpiphp_slot *slot)
 	struct pci_dev *dev;
 	struct pci_bus *bus = slot->bus;
 	struct acpiphp_func *func;
-	int max, pass;
-	LIST_HEAD(add_list);
 
-	acpiphp_rescan_slot(slot);
-	max = acpiphp_max_busnr(bus);
-	for (pass = 0; pass < 2; pass++) {
+	if (slot->flags & SLOT_IS_NATIVE) {
+		/*
+		 * If native PCIe hotplug is used, it will take care of
+		 * hotplug slot management and resource allocation for
+		 * hotplug bridges. However, ACPI hotplug may still be
+		 * used for non-hotplug bridges to bring in additional
+		 * devices such as Thunderbolt host controller.
+		 */
 		for_each_pci_bridge(dev, bus) {
-			if (PCI_SLOT(dev->devfn) != slot->device)
-				continue;
-
-			max = pci_scan_bridge(bus, dev, max, pass);
-			if (pass && dev->subordinate) {
-				check_hotplug_bridge(slot, dev);
-				pcibios_resource_survey_bus(dev->subordinate);
-				__pci_bus_size_bridges(dev->subordinate, &add_list);
+			if (PCI_SLOT(dev->devfn) == slot->device)
+				acpiphp_native_scan_bridge(dev);
+		}
+		pci_assign_unassigned_bridge_resources(bus->self);
+	} else {
+		LIST_HEAD(add_list);
+		int max, pass;
+
+		acpiphp_rescan_slot(slot);
+		max = acpiphp_max_busnr(bus);
+		for (pass = 0; pass < 2; pass++) {
+			for_each_pci_bridge(dev, bus) {
+				if (PCI_SLOT(dev->devfn) != slot->device)
+					continue;
+
+				max = pci_scan_bridge(bus, dev, max, pass);
+				if (pass && dev->subordinate) {
+					check_hotplug_bridge(slot, dev);
+					pcibios_resource_survey_bus(dev->subordinate);
+					__pci_bus_size_bridges(dev->subordinate,
+							       &add_list);
+				}
 			}
 		}
+		__pci_bus_assign_resources(bus, &add_list, NULL);
 	}
-	__pci_bus_assign_resources(bus, &add_list, NULL);
 
 	acpiphp_sanitize_bus(bus);
 	pcie_bus_configure_settings(bus);
-- 
2.16.2

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux