[PATCH RESEND v4 6/9] PCI: Move resource distribution for a single bridge outside of the loop

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is a special case where there is only single bridge on the bus. In
that case we just assign all resources to it. Currently this is done as
a part of the resource distribution loop but it does not have to be
there, and moving it outside actually improves readability.

While there we can add hotplug_bridges == 1 && normal_bridges == 0 to
the same block because they are dealt the same way.

Suggested-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
---
 drivers/pci/setup-bus.c | 28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index f1e6172734f0..b5eefd20d78d 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1951,6 +1951,22 @@ static void pci_bus_distribute_available_resources(struct pci_bus *bus,
 	mmio_start = mmio_res->start;
 	mmio_pref_start = mmio_pref_res->start;
 
+	/*
+	 * There is only one bridge on the bus so it gets all available
+	 * resources which it can then distribute to the possible
+	 * hotplug bridges below.
+	 */
+	if ((hotplug_bridges == 0 && normal_bridges == 1) ||
+	    (hotplug_bridges == 1 && normal_bridges == 0)) {
+		dev = list_first_entry(&bus->devices, struct pci_dev, bus_list);
+		if (dev->subordinate) {
+			pci_bus_distribute_available_resources(dev->subordinate,
+				add_list, available_io, available_mmio,
+				available_mmio_pref);
+		}
+		return;
+	}
+
 	/*
 	 * Go over devices on this bus and distribute the remaining
 	 * resource space between hotplug bridges.
@@ -1963,17 +1979,7 @@ static void pci_bus_distribute_available_resources(struct pci_bus *bus,
 		if (!b)
 			continue;
 
-		if (!hotplug_bridges && normal_bridges == 1) {
-			/*
-			 * There is only one bridge on the bus (upstream
-			 * port) so it gets all available resources
-			 * which it can then distribute to the possible
-			 * hotplug bridges below.
-			 */
-			pci_bus_distribute_available_resources(b, add_list,
-				available_io, available_mmio,
-				available_mmio_pref);
-		} else if (dev->is_hotplug_bridge) {
+		if (dev->is_hotplug_bridge) {
 			resource_size_t io, mmio, mmio_pref;
 
 			/*
-- 
2.16.2

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux