Re: [PATCH v17 01/10] LIB: Introduce a generic PIO mapping method

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 03, 2018 at 04:04:10PM +0200, Thierry Reding wrote:
> On Thu, Mar 15, 2018 at 02:15:50AM +0800, John Garry wrote:
> > From: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
> > 
> > In commit 41f8bba7f555 ("of/pci: Add pci_register_io_range() and
> > pci_pio_to_address()"), a new I/O space management was supported. With
> > that driver, the I/O ranges configured for PCI/PCIe hosts on some
> > architectures can be mapped to logical PIO, converted easily between
> > CPU address and the corresponding logicial PIO. Based on this, PCI
> > I/O devices can be accessed in a memory read/write way through the
> > unified in/out accessors.
> > 
> > But on some archs/platforms, there are bus hosts which access I/O
> > peripherals with host-local I/O port addresses rather than memory
> > addresses after memory-mapped.
> > 
> > To support those devices, a more generic I/O mapping method is introduced
> > here. Through this patch, both the CPU addresses and the host-local port
> > can be mapped into the logical PIO space with different logical/fake PIOs.
> > After this, all the I/O accesses to either PCI MMIO devices or host-local
> > I/O peripherals can be unified into the existing I/O accessors defined in
> > asm-generic/io.h and be redirected to the right device-specific hooks
> > based on the input logical PIO.
> > 
> > Signed-off-by: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
> > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
> > Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
> > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> > Tested-by: dann frazier <dann.frazier@xxxxxxxxxxxxx>
> > ---
> >  include/asm-generic/io.h  |   2 +
> >  include/linux/logic_pio.h | 124 ++++++++++++++++++++
> >  lib/Kconfig               |  15 +++
> >  lib/Makefile              |   2 +
> >  lib/logic_pio.c           | 282 ++++++++++++++++++++++++++++++++++++++++++++++
> >  5 files changed, 425 insertions(+)
> >  create mode 100644 include/linux/logic_pio.h
> >  create mode 100644 lib/logic_pio.c
> > 
> [...]
> > diff --git a/lib/logic_pio.c b/lib/logic_pio.c
> > new file mode 100644
> > index 0000000..8394c2d
> > --- /dev/null
> > +++ b/lib/logic_pio.c
> > @@ -0,0 +1,282 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (C) 2017 Hisilicon Limited, All Rights Reserved.
> > + * Author: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
> > + * Author: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
> > + *
> > + */
> > +
> > +#define pr_fmt(fmt)	"LOGIC PIO: " fmt
> > +
> > +#include <linux/of.h>
> > +#include <linux/io.h>
> > +#include <linux/logic_pio.h>
> > +#include <linux/mm.h>
> > +#include <linux/rculist.h>
> > +#include <linux/sizes.h>
> > +#include <linux/slab.h>
> > +
> > +/* The unique hardware address list. */
> > +static LIST_HEAD(io_range_list);
> > +static DEFINE_MUTEX(io_range_mutex);
> > +
> > +/* Consider a kernel general helper for this */
> > +#define in_range(b, first, len)        ((b) >= (first) && (b) < (first) + (len))
> > +
> > +/**
> > + * logic_pio_register_range - register logical PIO range for a host
> > + * @new_range: pointer to the io range to be registered.
> > + *
> > + * returns 0 on success, the error code in case of failure
> > + *
> > + * Register a new io range node in the io range list.
> > + */
> > +int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
> > +{
> > +	struct logic_pio_hwaddr *range;
> > +	resource_size_t start = new_range->hw_start;
> > +	resource_size_t end = new_range->hw_start + new_range->size;
> > +	resource_size_t mmio_sz = 0;
> > +	resource_size_t iio_sz = MMIO_UPPER_LIMIT;
> > +	int ret = 0;
> > +
> > +	if (!new_range || !new_range->fwnode || !new_range->size)
> > +		return -EINVAL;
> > +
> > +	mutex_lock(&io_range_mutex);
> > +	list_for_each_entry_rcu(range, &io_range_list, list) {
> > +		if (range->fwnode == new_range->fwnode) {
> > +			/* range already there */
> > +			ret = -EFAULT;
> > +			goto end_register;
> > +		}
> 
> This is the -EFAULT that propagates to pci-tegra.c's ->probe() and fails
> to bind the driver.
> 
> I'm not exactly sure what's causing the duplicate here because it's
> rather difficult to get at something useful from just the ->fwnode, but
> I'm fairly sure that the reason this breaks is because the Tegra driver
> will defer probe due to some regulators that aren't available on the
> first try. Given the above code and the rest of this file, I can't see a
> way to "fix" the driver and remove the I/O range on failure.
> 
> This is doubly bad because this doesn't only leak the ranges on probe
> deferral, but also on driver unload, and we just added support for
> building the Tegra driver as a loadable module, so these are actually
> cases that can happen in regular uses of the driver.
> 
> I have no idea on how to fix this. Anyone know of a quick fix to restore
> PCI for Tegra other than reverting all of these changes?
> 
> I suppose an API could be added to unregister the range, but the calling
> sequence is rather obfuscated, so removing the range will look totally
> asymmetric, I'm afraid.
> 
> Here's the call stack:
> 
> 	tegra_pcie_probe()
> 	tegra_pcie_parse_dt()
> 	of_pci_range_to_resource()
> 	pci_register_io_range()
> 	logic_pio_register_range()
> 
> So the range here is registered as part of a resource parsing function,
> which is supposed to not have any side-effects. There's no equivalent of
> that parsing routine (i.e. no "unparse" function that would undo the
> effects of parsing).
> 
> Perhaps a cleaner way would be to decouple the parsing from the actual
> request step that has the side-effect.
> 
> Going back in history a little, it looks like even before this commit
> the I/O range registration was triggered by the parsing code and even
> the range leak was there, except that it caused pci_register_io_range()
> to return 0 rather than -EFAULT. Perhaps the quickest fix for this would
> be to do the same in the new code and restore drivers that accidentally
> depend on this behaviour.

I can confirm that the following fixes the issue for me, though I don't
think it's a very clean fix given that the range will remain requested
forever, even if the driver is gone. But since that's already been the
case for quite a while, probably something that can be fixed separately.

Cc'ing linux-tegra for visibility.

Thierry

--- >8 ---
diff --git a/lib/logic_pio.c b/lib/logic_pio.c
index 29cedeadb397..4664b87e1c5f 100644
--- a/lib/logic_pio.c
+++ b/lib/logic_pio.c
@@ -46,7 +46,6 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
 	list_for_each_entry_rcu(range, &io_range_list, list) {
 		if (range->fwnode == new_range->fwnode) {
 			/* range already there */
-			ret = -EFAULT;
 			goto end_register;
 		}
 		if (range->flags == LOGIC_PIO_CPU_MMIO &&

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux