Hi Ian, > The current Kconfig for serdev is not compatible when adding ACPI support as it does not work when built as a module as it requires config SERIAL_DEV_CTRL_TTYPORT to be set. This patch makes serdev compiled into the kernel if selected so that config SERIAL_DEV_CTRL_TTYPORT can be correctly set if requiring ACPI support. > --- > drivers/tty/serdev/Kconfig | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/drivers/tty/serdev/Kconfig b/drivers/tty/serdev/Kconfig > index cdc6b820cf93..a9fb09a9c105 100644 > --- a/drivers/tty/serdev/Kconfig > +++ b/drivers/tty/serdev/Kconfig > @@ -2,7 +2,8 @@ > # Serial bus device driver configuration > # > menuconfig SERIAL_DEV_BUS > - tristate "Serial device bus" > + bool "Serial device bus" > + default y > help > Core support for devices connected via a serial port. > > @@ -11,6 +12,6 @@ if SERIAL_DEV_BUS > config SERIAL_DEV_CTRL_TTYPORT > bool "Serial device TTY port controller" > depends on TTY > - depends on SERIAL_DEV_BUS != m > + default y actually we made hci_nokia.c be buildable as separate module. We might need to do the same for hci_bcm.c to avoid forcing SERIAL_DEV_BUS into a bool. Or you need to explain the reason behind this change a bit better. Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html