On Friday, July 21, 2017 06:20:15 PM Andy Shevchenko wrote: > On Fri, Jul 21, 2017 at 5:46 PM, Rajmohan Mani <rajmohan.mani@xxxxxxxxx> wrote: > > This is the patch series for TPS68470 PMIC that works as a camera PMIC. > > > > The patch series provide the following 3 drivers, to help configure the voltage regulators, clocks and GPIOs provided by the TPS68470 PMIC, to be able to use the camera sensors connected to this PMIC. > > > > TPS68470 MFD driver: > > This is the multi function driver that initializes the TPS68470 PMIC and supports the GPIO and Op Region functions. > > > > TPS68470 GPIO driver: > > This is the PMIC GPIO driver that will be used by the OS GPIO layer, when the BIOS / firmware triggered GPIO access is done. > > > > TPS68470 Op Region driver: > > This is the driver that will be invoked, when the BIOS / firmware configures the voltage / clock for the sensors / vcm devices connected to the PMIC. > > > > All three patches are good to me (we did few rounds of internal review > before posting v4) > > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> OK, so how should they be routed? Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
