Dear Durga, Thanks so much for your very quick reply! Sorry my first email was so long (and slightly grumpy on re-reading it!) Answers to your questions: ----------------- 1. What does your temp2_crit report ? $ pwd /sys/class/hwmon/hwmon1/device $ ls driver name temp2_crit temp2_label temp4_crit_alarm temp4_max hwmon power temp2_crit_alarm temp2_max temp4_input uevent modalias subsystem temp2_input temp4_crit temp4_label $ cat name temp2_label temp2_input temp2_max temp2_crit temp2_crit_alarm coretemp <-- name Core 0 <-- label 104000 <-- input 95000 <-- max 105000 <-- crit 0 <-- crit_alarm (the "cat" command above was run whilst the machine was also running "stress -c 8". The fan had just started). ---------------------- 2. regarding trip_point_0_temp: as far as I can tell, none of the 10 directories /sys/class/thermal/thermal_zone[0-9]/ contain temperature measurements from my CPU. None of the thermal_zone?/temp files change when I heavily load my CPU. Instead the temp measurements from my CPU appear to live in /sys/class/hwmon/hwmon1/device. There do not appear to be any "trip_point" files in /sys/class/hwmon/hwmon1/device. -------------------- 3. Could you please post the output of all cooling_device?/type interfaces here ? $ cat /sys/class/thermal/cooling_device?/type Processor Processor Processor Processor LCD But if I query the current state of each cooling device while the fan is running: $ cat /sys/class/thermal/cooling_device?/cur_state 0 0 0 0 24 However, one further issue to mention is that when the core CPU temp gets to 105 degrees C under Linux, the fan does not run continuously. Instead the motherboard appears to rapidly turn the fan on and off (I've checked by applying a volt meter to the fan connector). The end result is that the fan makes a sound a little like a hard disk seeking. My naive guess would be that something like this is happening: the CPU gets to 105 so the fan turns on so the CPU drops to 104 so the fan turns off so the CPU gets to 105 etc etc (is this called "hysteresis"?) The fan runs continuously under Windows. Thanks again for responding to my post. It'd be wonderful to be able to fix this issue without having to resort to a soldering iron ;) Thanks again, Jack On 24 September 2012 15:21, R, Durgadoss <durgadoss.r@xxxxxxxxx> wrote: > Hi Jack, > > That's a really long e-mail to start with.. > > Some of your findings are correct: > > 1. Coretemp module does not control fan speed. It reports > only CPU temperature. Nothing inside /sys/class/thermal/ > reports CPU temperature. temp2_max is not writeable. > What does your temp2_crit report ? > > 2. trip_point_0_temp is not writeable...But recently there are > patches that make it writeable. If you are interested, please > give this patch here, a try: > http://www.spinics.net/lists/linux-pm/msg27925.html > > 3. Could you please post the output of all cooling_device?/type > interfaces here ? > > Thanks, > Durga >> -----Original Message----- >> From: linux-acpi-owner@xxxxxxxxxxxxxxx [mailto:linux-acpi- >> owner@xxxxxxxxxxxxxxx] On Behalf Of Jack Kelly >> Sent: Monday, September 24, 2012 2:43 PM >> To: linux-acpi@xxxxxxxxxxxxxxx >> Subject: HP laptop: fan off until CPU temp near 105 degrees C >> >> Dear Linux ACPI list, >> >> I am having a serious problem with the control of the CPU fan on my HP >> ProBook 6450b laptop and it has been suggested to me that this may be >> a Linux ACPI issue. When the machine first powers on, the fan runs >> (as expected). If I boot into Windows then the fan continues running >> (as expected). However, if I boot into Linux then the fan turns off >> during the boot sequence. The fan does not turn on again until the >> CPU gets close to 105 degrees C, which sounds dangerously hot to me. >> I want the fan to run continually but I cannot find a way to make the >> fan run continually. >> >> ********************************* >> Lots more details of this issue: >> ********************************* >> >> This isn't a hardware issue >> ---------------------------- >> The failure of the fan to start isn't a hardware issue: the fan is >> free from dust and the fan runs perfectly in Windows 7, grub, and the >> laptop BIOS screen. >> >> >> What's so bad about 105 degrees C? >> ---------------------------------- >> The processor's specification sheet states that the processor (an i5) >> can handle a max core temp (t_junction) of 105 degrees C. But the >> plastic keyboard immediately above the CPU almost certainly can't! And >> my lap can't either (the side and the bottom of the laptop literally >> get too hot to touch). And the motherboard probably doesn't enjoy the >> thermal stresses either. There are reports on various forums of >> motherboards needing to be replaced and forced shutdowns due to >> overheating. So, however you look at it, the laptop CPU cores should >> never be allowed to get anywhere near 105 degrees C IMHO. Windows 7 >> keeps the CPU below 70 degrees C, even under heavy load. >> >> The fact that Linux allows the CPU to get so hot is a very serious problem >> IMHO. >> >> >> The desired fix >> --------------- >> The problem is not to do with throttling the CPU. The solution is >> simple: the fan should just be on all the time. (I'm seriously >> considering just permanently connecting power to the fan.) Or, even >> better, I (the user) should be allowed to specify the CPU temperature >> at which the fan turns on. >> >> >> Things I've tried >> ----------------- >> Alternative Linux distros >> I'm running Ubuntu 12.04 64-bit so I thought I'd try some >> alternatives. They all exhibited exactly the same behaviour of the >> fan: >> >> Fedora 17 64-bit live CD (kernel 3.3.4) >> Ubuntu 12.10 pre-release 64-bit live CD (kernel 3.5) >> Ubuntu 12.04 32-bit live CD (kernel 3.2.0) >> Ubuntu 11.10 64-bit live CD (kernel 3.0.4) >> Ubuntu 11.04 64-bit live CD (kernel 2.6.38) >> Ubuntu 10.10 64-bit live CD (kernel 2.6.35) >> >> >> lm-sensors and fancontrol >> ------------------------- >> I ran sensors-detect. It told me to add the coretemp module to >> /etc/modules, which I did. >> - sensors reports the temperature of both my physical CPU cores. >> - pwmconfig complains that "There are no pwm-capable sensor modules >> installed" so I can't use fancontrol. >> >> >> i8kutils >> -------- >> Just reports the fans are set to "-1" and refuses to change them. >> (Yes, i8kmon is loaded.) >> >> >> Tinkering with the /proc/ or /sys/ file system >> ---------------------------------------------- >> I don't have a /proc/acpi/fan directory. The directories >> /sys/class/thermal/thermal_zone?/ appear to only describe a few heat >> sensors on the motherboard (not the CPU temperatures reported by >> coretemp) and I can't seem to modify the trip_point_0_temp files. >> >> The CPU temps reported by coretemp seem to live in >> /sys/class/hwmon/hwmon1/device. If I attempt to change the max from 95 >> degrees C to 50 degrees C by running >> >> sudo bash -c "echo 50000 > >> /sys/class/hwmon/hwmon1/device/temp2_max" >> >> I get the following error: >> >> bash: /sys/class/hwmon/hwmon1/device/temp2_max: Permission denied >> >> When my CPU fan does run (i.e. when the CPU temp gets near to 105 >> degrees C) nothing changes in >> /sys/class/thermal/cooling_device?/cur_state. i.e. Linux doesn't >> appear to acknowledge that the fan has started to run. >> >> Incidentally, Hardware Monitor (running under Windows) can't find my >> CPU fan either (but the fan just magically works under Windows). So I >> guess my fan isn't exposing itself very clearly to the OS. >> >> >> Boot options >> ------------ >> The following all had no effect: >> >> - acpi.power_nocheck=1 >> - acpi_osi=Linux >> - acpi_osi=linux >> - acpi_osi=Windows >> - acpi=strict >> >> The only thing I tried which had any effect on my CPU fan was starting >> with the boot option acpi=off. This allowed the fan to continue >> spinning even while Ubuntu was running. But completely disabling ACPI >> isn't a workable option for a production system. >> >> >> Talking directly to the fan controller over I2C >> ----------------------------------------------- >> I guessed that my fan controller might be connected to the southbridge >> via I2C. So I tinkered with i2c-tools but i2cdetect always complained >> that the /dev/i2c-? files were not valid I2C devices. I tried loading >> a number of i2c-related modules but to no avail. >> >> >> What's controlling my CPU fan? The ACPI subsystem? >> -------------------------------------------------- >> The evidence is somewhat contradictory. On the one hand, setting the >> boot option acpi=off successfully enables the fan, which suggests that >> the ACPI subsystem is switching off my fan during a normal boot. On >> the other hand, there's a bunch of evidence suggesting the fan isn't >> controlled by ACPI on this laptop: >> >> I dissassembled my DSDT and found that PNP0c0b is not present (which >> apparently is the code for a fan controller). Also, the evidence above >> in the "Tinkering with the /proc/ or /sys/ file system" section would >> suggest that my fan's controller isn't exposed over ACPI (or, >> alternatively, it is exposed over ACPI but Linux doesn't know how to >> handle it). >> >> I have noticed the following error in dmesg: [Firmware Bug]: ACPI: >> BIOS _OSI(Linux) query ignored >> >> My full dmesg output is at the bottom of this email. >> >> >> My guess at what's happening >> ---------------------------- >> This is total guess work but I think this is how it's working at the >> moment: coretemp queries the CPU and finds that it can handle max temp >> (T_junction) of 105 degrees C. coretemp is not responsible for >> controlling the fan (apparently) so some other subsystem (hwmon? acpi? >> the BIOS?) must be taking the max temperatures stated by coretemp and >> using these as the set points for the fan. >> >> >> My system config >> ---------------- >> HP ProBook 6450b with 4GB of RAM and a magnetic hard disk. I'm running >> the latest HP BIOS (version F.23, released 12 June 2012) >> >> CPU >> - Name = Intel Core i5 450M. Two cores, each with 2 threads. >> - Codename = Arrandale >> - Specification = Intel(R) Core(TM) i5 CPU M 450 @ 2.40GHz >> - Package (platform ID) = Socket 989 rPGA (0x4) >> - CPUID = 6.5.5 >> - Extended CPUID = 6.25 >> - Core Stepping = K0 >> >> Chipset >> - Northbridge = Intel Havendale/Clarkdale Host Bridge rev. 02 >> - Southbridge = Intel HM57 rev. 05 >> - Memory Type = DDR3 >> >> Monitoring >> - Mainboard Model = 146D (0x000000DF - 0x00002220) >> - LPCIO Vendor = SMSC >> - LPCIO Vendor ID = 0x55 >> - LPCIO Chip ID = 0x4C >> >> >> >> Summary >> -------- >> So, in summary: I'm 99% sure there's a bug in there somewhere. The fan >> really, really should turn on long before the CPU gets anywhere near >> 105 degrees C. I guess I have two questions: firstly, does anyone know >> a fix?! If not, can anyone suggest any further diagnostic tests I can >> run? >> >> >> Warmest regards, >> Jack >> >> >> dmesg: >> ------ >> >> [ 0.000000] Initializing cgroup subsys cpuset >> [ 0.000000] Initializing cgroup subsys cpu >> [ 0.000000] Linux version 3.2.0-31-generic (buildd@allspice) (gcc >> version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #50-Ubuntu SMP Fri Sep >> 7 16:16:45 UTC 2012 (Ubuntu 3.2.0-31.50-generic 3.2.28) >> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic >> root=UUID=f2ef5bd5-bb5d-484d-a638-ce1d9d6ac5e2 ro >> [ 0.000000] KERNEL supported cpus: >> [ 0.000000] Intel GenuineIntel >> [ 0.000000] AMD AuthenticAMD >> [ 0.000000] Centaur CentaurHauls >> [ 0.000000] BIOS-provided physical RAM map: >> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) >> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) >> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) >> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bafcf000 (usable) >> [ 0.000000] BIOS-e820: 00000000bafcf000 - 00000000bb6cf000 (reserved) >> [ 0.000000] BIOS-e820: 00000000bb6cf000 - 00000000bb7cf000 (ACPI NVS) >> [ 0.000000] BIOS-e820: 00000000bb7cf000 - 00000000bb7ff000 (ACPI data) >> [ 0.000000] BIOS-e820: 00000000bb7ff000 - 00000000bb800000 (usable) >> [ 0.000000] BIOS-e820: 00000000bb800000 - 00000000bc000000 (reserved) >> [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) >> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) >> [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) >> [ 0.000000] BIOS-e820: 00000000fed19000 - 00000000fed1a000 (reserved) >> [ 0.000000] BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved) >> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) >> [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) >> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable) >> [ 0.000000] NX (Execute Disable) protection: active >> [ 0.000000] DMI 2.6 present. >> [ 0.000000] DMI: Hewlett-Packard HP ProBook 6450b/146D, BIOS 68CDE >> Ver. F.23 06/13/2012 >> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 >> (usable) ==> (reserved) >> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 >> (usable) >> [ 0.000000] No AGP bridge found >> [ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000 >> [ 0.000000] MTRR default type: uncachable >> [ 0.000000] MTRR fixed ranges enabled: >> [ 0.000000] 00000-9FFFF write-back >> [ 0.000000] A0000-BFFFF uncachable >> [ 0.000000] C0000-FFFFF write-protect >> [ 0.000000] MTRR variable ranges enabled: >> [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect >> [ 0.000000] 1 base 000000000 mask F80000000 write-back >> [ 0.000000] 2 base 080000000 mask FC0000000 write-back >> [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable >> [ 0.000000] 4 base 100000000 mask FC0000000 write-back >> [ 0.000000] 5 base 138000000 mask FF8000000 uncachable >> [ 0.000000] 6 disabled >> [ 0.000000] 7 disabled >> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new >> 0x7010600070106 >> [ 0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x400000000 >> [ 0.000000] initial memory mapped : 0 - 20000000 >> [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 >> [ 0.000000] init_memory_mapping: 0000000000000000-00000000bb800000 >> [ 0.000000] 0000000000 - 00bb800000 page 2M >> [ 0.000000] kernel direct mapping tables up to bb800000 @ 1fffc000- >> 20000000 >> [ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000 >> [ 0.000000] 0100000000 - 0138000000 page 2M >> [ 0.000000] kernel direct mapping tables up to 138000000 @ bafc9000- >> bafcf000 >> [ 0.000000] RAMDISK: 35848000 - 36c1c000 >> [ 0.000000] ACPI: RSDP 00000000000fc600 00024 (v02 HPQOEM) >> [ 0.000000] ACPI: XSDT 00000000bb7fe120 00084 (v01 HPQOEM SLIC-MPC >> 0000000F 01000013) >> [ 0.000000] ACPI: FACP 00000000bb7fc000 000F4 (v03 HPQOEM 146D >> 0000000F HP 00000001) >> [ 0.000000] ACPI: DSDT 00000000bb7d8000 1ED5E (v02 HPQOEM 146D >> 00000001 INTL 20060912) >> [ 0.000000] ACPI: FACS 00000000bb76d000 00040 >> [ 0.000000] ACPI: HPET 00000000bb7fb000 00038 (v01 HPQOEM 146D >> 00000001 HP 00000001) >> [ 0.000000] ACPI: APIC 00000000bb7fa000 000BC (v01 HPQOEM 146D >> 00000001 HP 00000001) >> [ 0.000000] ACPI: MCFG 00000000bb7f9000 0003C (v01 HPQOEM 146D >> 00000001 HP 00000001) >> [ 0.000000] ACPI: ASF! 00000000bb7f8000 000A0 (v32 HPQOEM 146D >> 00000001 HP 00000001) >> [ 0.000000] ACPI: TCPA 00000000bb7f7000 00032 (v02 HPQOEM 146D >> 00000000 HP 00000001) >> [ 0.000000] ACPI: SSDT 00000000bb7d5000 00135 (v01 HPQOEM SataAhci >> 00001000 INTL 20060912) >> [ 0.000000] ACPI: SSDT 00000000bb7d4000 00314 (v01 HPQOEM PtidDevc >> 00001000 INTL 20060912) >> [ 0.000000] ACPI: SLIC 00000000bb7d3000 00176 (v01 HPQOEM SLIC-MPC >> 00000001 HP 00000001) >> [ 0.000000] ACPI: SSDT 00000000bb7d2000 00A10 (v01 PmRef CpuPm >> 00003000 INTL 20060912) >> [ 0.000000] ACPI: SSDT 00000000bb7d1000 00288 (v01 PmRef Cpu0Tst >> 00003000 INTL 20060912) >> [ 0.000000] ACPI: SSDT 00000000bb7d0000 00225 (v01 PmRef ApTst >> 00003000 INTL 20060912) >> [ 0.000000] ACPI: Local APIC address 0xfee00000 >> [ 0.000000] No NUMA configuration found >> [ 0.000000] Faking a node at 0000000000000000-0000000138000000 >> [ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000 >> [ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff] >> [ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> >> [ffff880133800000-ffff8801375fffff] on node 0 >> [ 0.000000] Zone PFN ranges: >> [ 0.000000] DMA 0x00000010 -> 0x00001000 >> [ 0.000000] DMA32 0x00001000 -> 0x00100000 >> [ 0.000000] Normal 0x00100000 -> 0x00138000 >> [ 0.000000] Movable zone start PFN for each node >> [ 0.000000] early_node_map[4] active PFN ranges >> [ 0.000000] 0: 0x00000010 -> 0x0000009f >> [ 0.000000] 0: 0x00000100 -> 0x000bafcf >> [ 0.000000] 0: 0x000bb7ff -> 0x000bb800 >> [ 0.000000] 0: 0x00100000 -> 0x00138000 >> [ 0.000000] On node 0 totalpages: 995167 >> [ 0.000000] DMA zone: 64 pages used for memmap >> [ 0.000000] DMA zone: 5 pages reserved >> [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 >> [ 0.000000] DMA32 zone: 16320 pages used for memmap >> [ 0.000000] DMA32 zone: 745488 pages, LIFO batch:31 >> [ 0.000000] Normal zone: 3584 pages used for memmap >> [ 0.000000] Normal zone: 225792 pages, LIFO batch:31 >> [ 0.000000] ACPI: PM-Timer IO Port: 0x408 >> [ 0.000000] ACPI: Local APIC address 0xfee00000 >> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) >> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) >> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) >> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) >> [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> [ 0.000000] ACPI: IRQ0 used by override. >> [ 0.000000] ACPI: IRQ2 used by override. >> [ 0.000000] ACPI: IRQ9 used by override. >> [ 0.000000] Using ACPI (MADT) for SMP configuration information >> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 >> [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs >> [ 0.000000] nr_irqs_gsi: 40 >> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - >> 00000000000a0000 >> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - >> 00000000000e0000 >> [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - >> 0000000000100000 >> [ 0.000000] PM: Registered nosave memory: 00000000bafcf000 - >> 00000000bb6cf000 >> [ 0.000000] PM: Registered nosave memory: 00000000bb6cf000 - >> 00000000bb7cf000 >> [ 0.000000] PM: Registered nosave memory: 00000000bb7cf000 - >> 00000000bb7ff000 >> [ 0.000000] PM: Registered nosave memory: 00000000bb800000 - >> 00000000bc000000 >> [ 0.000000] PM: Registered nosave memory: 00000000bc000000 - >> 00000000e0000000 >> [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - >> 00000000f0000000 >> [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - >> 00000000fec00000 >> [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - >> 00000000fec01000 >> [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - >> 00000000fed10000 >> [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - >> 00000000fed14000 >> [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - >> 00000000fed19000 >> [ 0.000000] PM: Registered nosave memory: 00000000fed19000 - >> 00000000fed1a000 >> [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - >> 00000000fed1b000 >> [ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - >> 00000000fed20000 >> [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - >> 00000000fee00000 >> [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - >> 00000000fee01000 >> [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - >> 00000000ffd80000 >> [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - >> 0000000100000000 >> [ 0.000000] Allocating PCI resources starting at bc000000 (gap: >> bc000000:24000000) >> [ 0.000000] Booting paravirtualized kernel on bare hardware >> [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 >> nr_cpu_ids:8 nr_node_ids:1 >> [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s83136 >> r8192 d23360 u262144 >> [ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152 >> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 >> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. >> Total pages: 975194 >> [ 0.000000] Policy zone: Normal >> [ 0.000000] Kernel command line: >> BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic >> root=UUID=f2ef5bd5-bb5d-484d-a638-ce1d9d6ac5e2 ro >> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) >> [ 0.000000] Checking aperture... >> [ 0.000000] No AGP bridge found >> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area >> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! >> [ 0.000000] Memory: 3814096k/5111808k available (6558k kernel code, >> 1131140k absent, 166572k reserved, 6642k data, 920k init) >> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, >> CPUs=8, Nodes=1 >> [ 0.000000] Hierarchical RCU implementation. >> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. >> [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 >> [ 0.000000] Extended CMOS year: 2000 >> [ 0.000000] Console: colour VGA+ 80x25 >> [ 0.000000] console [tty0] enabled >> [ 0.000000] allocated 32505856 bytes of page_cgroup >> [ 0.000000] please try 'cgroup_disable=memory' option if you don't >> want memory cgroups >> [ 0.000000] hpet clockevent registered >> [ 0.000000] Fast TSC calibration using PIT >> [ 0.004000] Detected 2393.981 MHz processor. >> [ 0.000003] Calibrating delay loop (skipped), value calculated >> using timer frequency.. 4787.96 BogoMIPS (lpj=9575924) >> [ 0.000121] pid_max: default: 32768 minimum: 301 >> [ 0.000198] Security Framework initialized >> [ 0.000265] AppArmor: AppArmor initialized >> [ 0.000319] Yama: becoming mindful. >> [ 0.000673] Dentry cache hash table entries: 524288 (order: 10, >> 4194304 bytes) >> [ 0.001694] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) >> [ 0.002166] Mount-cache hash table entries: 256 >> [ 0.002337] Initializing cgroup subsys cpuacct >> [ 0.002396] Initializing cgroup subsys memory >> [ 0.002455] Initializing cgroup subsys devices >> [ 0.002511] Initializing cgroup subsys freezer >> [ 0.002566] Initializing cgroup subsys blkio >> [ 0.002624] Initializing cgroup subsys perf_event >> [ 0.002706] CPU: Physical Processor ID: 0 >> [ 0.002761] CPU: Processor Core ID: 0 >> [ 0.002818] mce: CPU supports 9 MCE banks >> [ 0.002881] CPU0: Thermal monitoring enabled (TM1) >> [ 0.002943] using mwait in idle threads. >> [ 0.005022] ACPI: Core revision 20110623 >> [ 0.013522] ftrace: allocating 27008 entries in 106 pages >> [ 0.021702] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >> [ 0.061387] CPU0: Intel(R) Core(TM) i5 CPU M 450 @ 2.40GHz stepping >> 05 >> [ 0.167594] Performance Events: PEBS fmt1+, Westmere events, Intel >> PMU driver. >> [ 0.167766] ... version: 3 >> [ 0.167827] ... bit width: 48 >> [ 0.167888] ... generic registers: 4 >> [ 0.167948] ... value mask: 0000ffffffffffff >> [ 0.168012] ... max period: 000000007fffffff >> [ 0.168077] ... fixed-purpose events: 3 >> [ 0.168138] ... event mask: 000000070000000f >> [ 0.168399] NMI watchdog enabled, takes one hw-pmu counter. >> [ 0.168544] Booting Node 0, Processors #1 >> [ 0.168607] smpboot cpu 1: start_ip = 9a000 >> [ 0.279519] NMI watchdog enabled, takes one hw-pmu counter. >> [ 0.279701] #2 >> [ 0.279731] smpboot cpu 2: start_ip = 9a000 >> [ 0.387295] NMI watchdog enabled, takes one hw-pmu counter. >> [ 0.387461] #3 >> [ 0.387491] smpboot cpu 3: start_ip = 9a000 >> [ 0.495140] NMI watchdog enabled, takes one hw-pmu counter. >> [ 0.495251] Brought up 4 CPUs >> [ 0.495310] Total of 4 processors activated (19151.64 BogoMIPS). >> [ 0.498269] devtmpfs: initialized >> [ 0.499160] EVM: security.selinux >> [ 0.499220] EVM: security.SMACK64 >> [ 0.499278] EVM: security.capability >> [ 0.499949] PM: Registering ACPI NVS region at bb6cf000 (1048576 bytes) >> [ 0.500804] print_constraints: dummy: >> [ 0.500894] RTC time: 9:18:08, date: 09/24/12 >> [ 0.500987] NET: Registered protocol family 16 >> [ 0.501147] Trying to unpack rootfs image as initramfs... >> [ 0.501152] ACPI FADT declares the system doesn't support PCIe >> ASPM, so disable it >> [ 0.501154] ACPI: bus type pci registered >> [ 0.501226] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem >> 0xe0000000-0xefffffff] (base 0xe0000000) >> [ 0.501228] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in >> E820 >> [ 0.532935] PCI: Using configuration type 1 for base access >> [ 0.533855] bio: create slab <bio-0> at 0 >> [ 0.534001] ACPI: Added _OSI(Module Device) >> [ 0.534061] ACPI: Added _OSI(Processor Device) >> [ 0.534122] ACPI: Added _OSI(3.0 _SCP Extensions) >> [ 0.534183] ACPI: Added _OSI(Processor Aggregator Device) >> [ 0.536028] ACPI: EC: Look up EC in DSDT >> [ 0.560438] ACPI: Executed 1 blocks of module-level executable AML code >> [ 0.602925] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored >> [ 0.644497] ACPI: SSDT 00000000bb6c8918 003F9 (v01 PmRef Cpu0Ist >> 00003000 INTL 20060912) >> [ 0.645076] ACPI: Dynamic OEM Table Load: >> [ 0.645184] ACPI: SSDT (null) 003F9 (v01 PmRef Cpu0Ist >> 00003000 INTL 20060912) >> [ 0.645449] ACPI: SSDT 00000000bb6c6018 008AA (v01 PmRef Cpu0Cst >> 00003001 INTL 20060912) >> [ 0.646006] ACPI: Dynamic OEM Table Load: >> [ 0.646114] ACPI: SSDT (null) 008AA (v01 PmRef Cpu0Cst >> 00003001 INTL 20060912) >> [ 0.690959] ACPI: SSDT 00000000bb6c7a98 00303 (v01 PmRef ApIst >> 00003000 INTL 20060912) >> [ 0.691576] ACPI: Dynamic OEM Table Load: >> [ 0.691685] ACPI: SSDT (null) 00303 (v01 PmRef ApIst >> 00003000 INTL 20060912) >> [ 0.714785] ACPI: SSDT 00000000bb6c5d98 00119 (v01 PmRef ApCst >> 00003000 INTL 20060912) >> [ 0.715371] ACPI: Dynamic OEM Table Load: >> [ 0.715479] ACPI: SSDT (null) 00119 (v01 PmRef ApCst >> 00003000 INTL 20060912) >> [ 0.827677] Freeing initrd memory: 20304k freed >> [ 1.165720] ACPI: Interpreter enabled >> [ 1.165789] ACPI: (supports S0 S3 S4 S5) >> [ 1.165968] ACPI: Using IOAPIC for interrupt routing >> [ 1.167597] ACPI: Power Resource [APPR] (off) >> [ 1.180859] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 >> [ 1.181103] ACPI: No dock devices found. >> [ 1.181164] HEST: Table not found. >> [ 1.181225] PCI: Using host bridge windows from ACPI; if necessary, >> use "pci=nocrs" and report a bug >> [ 1.182002] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) >> [ 1.182638] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] >> [ 1.182709] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] >> [ 1.182778] pci_root PNP0A08:00: host bridge window [mem >> 0x000a0000-0x000bffff] >> [ 1.182875] pci_root PNP0A08:00: host bridge window [mem >> 0xc0000000-0xdfffffff] >> [ 1.182971] pci_root PNP0A08:00: host bridge window [mem >> 0xf0000000-0xfedfffff] >> [ 1.183067] pci_root PNP0A08:00: host bridge window [mem >> 0xfee01000-0xffffffff] >> [ 1.183173] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600 >> [ 1.183191] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU >> for graphics >> [ 1.183307] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300 >> [ 1.183317] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit] >> [ 1.183323] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref] >> [ 1.183327] pci 0000:00:02.0: reg 20: [io 0x4050-0x4057] >> [ 1.183390] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780 >> [ 1.183418] pci 0000:00:16.0: reg 10: [mem 0xd4824000-0xd482400f 64bit] >> [ 1.183509] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold >> [ 1.183514] pci 0000:00:16.0: PME# disabled >> [ 1.183552] pci 0000:00:19.0: [8086:10eb] type 0 class 0x000200 >> [ 1.183576] pci 0000:00:19.0: reg 10: [mem 0xd4800000-0xd481ffff] >> [ 1.183587] pci 0000:00:19.0: reg 14: [mem 0xd482a000-0xd482afff] >> [ 1.183599] pci 0000:00:19.0: reg 18: [io 0x4020-0x403f] >> [ 1.183686] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold >> [ 1.183690] pci 0000:00:19.0: PME# disabled >> [ 1.183719] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 >> [ 1.183743] pci 0000:00:1a.0: reg 10: [mem 0xd4829000-0xd48293ff] >> [ 1.183849] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold >> [ 1.183854] pci 0000:00:1a.0: PME# disabled >> [ 1.183884] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 >> [ 1.183904] pci 0000:00:1b.0: reg 10: [mem 0xd4820000-0xd4823fff 64bit] >> [ 1.183999] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >> [ 1.184004] pci 0000:00:1b.0: PME# disabled >> [ 1.184031] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 >> [ 1.184130] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >> [ 1.184134] pci 0000:00:1c.0: PME# disabled >> [ 1.184163] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604 >> [ 1.184261] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >> [ 1.184266] pci 0000:00:1c.1: PME# disabled >> [ 1.184297] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604 >> [ 1.184395] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold >> [ 1.184400] pci 0000:00:1c.2: PME# disabled >> [ 1.184428] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604 >> [ 1.184527] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold >> [ 1.184531] pci 0000:00:1c.3: PME# disabled >> [ 1.184569] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 >> [ 1.184593] pci 0000:00:1d.0: reg 10: [mem 0xd4828000-0xd48283ff] >> [ 1.184701] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold >> [ 1.184705] pci 0000:00:1d.0: PME# disabled >> [ 1.184729] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 >> [ 1.184814] pci 0000:00:1f.0: [8086:3b0b] type 0 class 0x000601 >> [ 1.184941] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106 >> [ 1.184967] pci 0000:00:1f.2: reg 10: [io 0x4048-0x404f] >> [ 1.184978] pci 0000:00:1f.2: reg 14: [io 0x405c-0x405f] >> [ 1.184988] pci 0000:00:1f.2: reg 18: [io 0x4040-0x4047] >> [ 1.184999] pci 0000:00:1f.2: reg 1c: [io 0x4058-0x405b] >> [ 1.185010] pci 0000:00:1f.2: reg 20: [io 0x4000-0x401f] >> [ 1.185020] pci 0000:00:1f.2: reg 24: [mem 0xd4827000-0xd48277ff] >> [ 1.185086] pci 0000:00:1f.2: PME# supported from D3hot >> [ 1.185091] pci 0000:00:1f.2: PME# disabled >> [ 1.185123] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180 >> [ 1.185150] pci 0000:00:1f.6: reg 10: [mem 0xd4826000-0xd4826fff 64bit] >> [ 1.185301] pci 0000:00:1c.0: PCI bridge to [bus 01-01] >> [ 1.185371] pci 0000:00:1c.0: bridge window [mem 0xd4700000-0xd47fffff] >> [ 1.185431] pci 0000:00:1c.1: PCI bridge to [bus 02-42] >> [ 1.185498] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] >> [ 1.185503] pci 0000:00:1c.1: bridge window [mem 0xd0700000-0xd46fffff] >> [ 1.185618] pci 0000:43:00.0: [1180:e822] type 0 class 0x000805 >> [ 1.185640] pci 0000:43:00.0: reg 10: [mem 0xd0603000-0xd06030ff] >> [ 1.185800] pci 0000:43:00.0: supports D1 D2 >> [ 1.185802] pci 0000:43:00.0: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.185808] pci 0000:43:00.0: PME# disabled >> [ 1.185862] pci 0000:43:00.1: [1180:e230] type 0 class 0x000880 >> [ 1.185884] pci 0000:43:00.1: reg 10: [mem 0xd0602000-0xd06020ff] >> [ 1.186048] pci 0000:43:00.1: supports D1 D2 >> [ 1.186049] pci 0000:43:00.1: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.186055] pci 0000:43:00.1: PME# disabled >> [ 1.186102] pci 0000:43:00.2: [1180:e852] type 0 class 0x000880 >> [ 1.186124] pci 0000:43:00.2: reg 10: [mem 0xd0601000-0xd06010ff] >> [ 1.186284] pci 0000:43:00.2: supports D1 D2 >> [ 1.186286] pci 0000:43:00.2: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.186292] pci 0000:43:00.2: PME# disabled >> [ 1.186338] pci 0000:43:00.3: [1180:e832] type 0 class 0x000c00 >> [ 1.186360] pci 0000:43:00.3: reg 10: [mem 0xd0600000-0xd06007ff] >> [ 1.186521] pci 0000:43:00.3: supports D1 D2 >> [ 1.186523] pci 0000:43:00.3: PME# supported from D0 D1 D2 D3hot D3cold >> [ 1.186529] pci 0000:43:00.3: PME# disabled >> [ 1.193984] pci 0000:00:1c.2: PCI bridge to [bus 43-43] >> [ 1.194059] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd06fffff] >> [ 1.194179] pci 0000:44:00.0: [14e4:4727] type 0 class 0x000280 >> [ 1.194210] pci 0000:44:00.0: reg 10: [mem 0xd0500000-0xd0503fff 64bit] >> [ 1.194368] pci 0000:44:00.0: supports D1 D2 >> [ 1.201943] pci 0000:00:1c.3: PCI bridge to [bus 44-44] >> [ 1.202013] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff] >> [ 1.202092] pci 0000:00:1e.0: PCI bridge to [bus 45-45] (subtractive decode) >> [ 1.202167] pci 0000:00:1e.0: bridge window [mem 0xd0400000-0xd04fffff] >> [ 1.202175] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] >> (subtractive decode) >> [ 1.202176] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] >> (subtractive decode) >> [ 1.202178] pci 0000:00:1e.0: bridge window [mem >> 0x000a0000-0x000bffff] (subtractive decode) >> [ 1.202180] pci 0000:00:1e.0: bridge window [mem >> 0xc0000000-0xdfffffff] (subtractive decode) >> [ 1.202182] pci 0000:00:1e.0: bridge window [mem >> 0xf0000000-0xfedfffff] (subtractive decode) >> [ 1.202184] pci 0000:00:1e.0: bridge window [mem >> 0xfee01000-0xffffffff] (subtractive decode) >> [ 1.202215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >> [ 1.202409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] >> [ 1.202455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] >> [ 1.202482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] >> [ 1.202529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] >> [ 1.202569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] >> [ 1.202951] pci0000:00: Requesting ACPI _OSC control (0x1d) >> [ 1.204015] pci0000:00: ACPI _OSC control (0x1d) granted >> [ 1.209353] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff]) >> [ 1.209481] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600 >> [ 1.209499] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600 >> [ 1.209518] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600 >> [ 1.209534] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600 >> [ 1.209551] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600 >> [ 1.209566] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600 >> [ 1.209595] pci0000:ff: Requesting ACPI _OSC control (0x1d) >> [ 1.209663] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), >> returned control mask: 0x1d >> [ 1.209762] ACPI _OSC control for PCIe not granted, disabling ASPM >> [ 1.210028] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) >> [ 1.210422] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15) >> [ 1.210813] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) >> [ 1.211206] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 >> 14 15) *10 >> [ 1.211647] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) >> [ 1.212040] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) >> [ 1.212432] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 >> 14 15) *0, disabled. >> [ 1.212900] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 >> 14 15) *0, disabled. >> [ 1.213431] vgaarb: device added: >> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none >> [ 1.213535] vgaarb: loaded >> [ 1.213592] vgaarb: bridge control possible 0000:00:02.0 >> [ 1.213742] i2c-core: driver [aat2870] using legacy suspend method >> [ 1.213811] i2c-core: driver [aat2870] using legacy resume method >> [ 1.213936] SCSI subsystem initialized >> [ 1.214053] libata version 3.00 loaded. >> [ 1.214091] usbcore: registered new interface driver usbfs >> [ 1.214164] usbcore: registered new interface driver hub >> [ 1.214252] usbcore: registered new device driver usb >> [ 1.214388] PCI: Using ACPI for IRQ routing >> [ 1.224312] PCI: pci_cache_line_size set to 64 bytes >> [ 1.224398] reserve RAM buffer: 000000000009fc00 - 000000000009ffff >> [ 1.224400] reserve RAM buffer: 00000000bafcf000 - 00000000bbffffff >> [ 1.224402] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff >> [ 1.224487] NetLabel: Initializing >> [ 1.224546] NetLabel: domain hash size = 128 >> [ 1.224602] NetLabel: protocols = UNLABELED CIPSOv4 >> [ 1.224672] NetLabel: unlabeled traffic allowed by default >> [ 1.224784] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 >> [ 1.225071] hpet0: 8 comparators, 64-bit 14.318180 MHz counter >> [ 1.227154] Switching to clocksource hpet >> [ 1.232742] AppArmor: AppArmor Filesystem Enabled >> [ 1.232838] pnp: PnP ACPI init >> [ 1.232912] ACPI: bus type pnp registered >> [ 1.233323] pnp 00:00: [bus 00-fe] >> [ 1.233326] pnp 00:00: [io 0x0000-0x0cf7 window] >> [ 1.233327] pnp 00:00: [io 0x0cf8-0x0cff] >> [ 1.233329] pnp 00:00: [io 0x0d00-0xffff window] >> [ 1.233331] pnp 00:00: [mem 0x000a0000-0x000bffff window] >> [ 1.233332] pnp 00:00: [mem 0x000c0000-0x000c3fff window] >> [ 1.233334] pnp 00:00: [mem 0x000c4000-0x000c7fff window] >> [ 1.233335] pnp 00:00: [mem 0x000c8000-0x000cbfff window] >> [ 1.233337] pnp 00:00: [mem 0x000cc000-0x000cffff window] >> [ 1.233338] pnp 00:00: [mem 0x000d0000-0x000d3fff window] >> [ 1.233340] pnp 00:00: [mem 0x000d4000-0x000d7fff window] >> [ 1.233341] pnp 00:00: [mem 0x000d8000-0x000dbfff window] >> [ 1.233343] pnp 00:00: [mem 0x000dc000-0x000dffff window] >> [ 1.233345] pnp 00:00: [mem 0x000e0000-0x000e3fff window] >> [ 1.233346] pnp 00:00: [mem 0x000e4000-0x000e7fff window] >> [ 1.233348] pnp 00:00: [mem 0x000e8000-0x000ebfff window] >> [ 1.233349] pnp 00:00: [mem 0x000ec000-0x000effff window] >> [ 1.233351] pnp 00:00: [mem 0x000f0000-0x000fffff window] >> [ 1.233352] pnp 00:00: [mem 0xc0000000-0xdfffffff window] >> [ 1.233354] pnp 00:00: [mem 0xf0000000-0xfedfffff window] >> [ 1.233356] pnp 00:00: [mem 0xfee01000-0xffffffff window] >> [ 1.233448] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 >> PNP0a03 (active) >> [ 1.233621] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] >> [ 1.233623] pnp 00:01: [mem 0xfed10000-0xfed13fff] >> [ 1.233624] pnp 00:01: [mem 0xfed1b000-0xfed1bfff] >> [ 1.233626] pnp 00:01: [mem 0xfed19000-0xfed19fff] >> [ 1.233627] pnp 00:01: [mem 0xd4900000-0xd4900fff] >> [ 1.233629] pnp 00:01: [mem 0xe0000000-0xefffffff] >> [ 1.233630] pnp 00:01: [mem 0xfed20000-0xfed3ffff] >> [ 1.233632] pnp 00:01: [mem 0xfed90000-0xfed8ffff disabled] >> [ 1.233633] pnp 00:01: [mem 0xfed45000-0xfed8ffff] >> [ 1.233635] pnp 00:01: [mem 0xfec00000-0xfec00fff] >> [ 1.233687] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved >> [ 1.233758] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved >> [ 1.233827] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved >> [ 1.233897] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved >> [ 1.233966] system 00:01: [mem 0xd4900000-0xd4900fff] has been reserved >> [ 1.234035] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved >> [ 1.234105] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved >> [ 1.234175] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved >> [ 1.234245] system 00:01: [mem 0xfec00000-0xfec00fff] could not be >> reserved >> [ 1.234316] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) >> [ 1.234382] pnp 00:02: [io 0x0000-0x001f] >> [ 1.234384] pnp 00:02: [io 0x0081-0x0091] >> [ 1.234387] pnp 00:02: [io 0x0093-0x009f] >> [ 1.234388] pnp 00:02: [io 0x00c0-0x00df] >> [ 1.234390] pnp 00:02: [dma 4] >> [ 1.234418] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) >> [ 1.234425] pnp 00:03: [mem 0xff000000-0xffffffff] >> [ 1.234449] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) >> [ 1.234492] pnp 00:04: [io 0xfe00-0xfe0f] >> [ 1.234494] pnp 00:04: [io 0xfe80-0xfe8f] >> [ 1.234495] pnp 00:04: [mem 0xfed40000-0xfed44fff] >> [ 1.234526] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 >> PNP0c31 (active) >> [ 1.234592] pnp 00:05: [mem 0xfed00000-0xfed003ff] >> [ 1.234622] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) >> [ 1.234630] pnp 00:06: [io 0x00f0] >> [ 1.234642] pnp 00:06: [irq 13] >> [ 1.234668] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) >> [ 1.234676] pnp 00:07: [io 0x002e-0x002f] >> [ 1.234678] pnp 00:07: [io 0x004e-0x004f] >> [ 1.234679] pnp 00:07: [io 0x0061] >> [ 1.234680] pnp 00:07: [io 0x0063] >> [ 1.234681] pnp 00:07: [io 0x0065] >> [ 1.234683] pnp 00:07: [io 0x0067] >> [ 1.234684] pnp 00:07: [io 0x0070] >> [ 1.234685] pnp 00:07: [io 0x0080] >> [ 1.234686] pnp 00:07: [io 0x0092] >> [ 1.234688] pnp 00:07: [io 0x00b2-0x00b3] >> [ 1.234689] pnp 00:07: [io 0x0200-0x027f] >> [ 1.234690] pnp 00:07: [io 0x1000-0x100f] >> [ 1.234691] pnp 00:07: [io 0xffff] >> [ 1.234693] pnp 00:07: [io 0xffff] >> [ 1.234694] pnp 00:07: [io 0x0400-0x047f] >> [ 1.234695] pnp 00:07: [io 0x0500-0x057f] >> [ 1.234697] pnp 00:07: [io 0xef80-0xef9f] >> [ 1.234741] system 00:07: [io 0x0200-0x027f] has been reserved >> [ 1.234808] system 00:07: [io 0x1000-0x100f] has been reserved >> [ 1.234875] system 00:07: [io 0xffff] has been reserved >> [ 1.234941] system 00:07: [io 0xffff] has been reserved >> [ 1.235005] system 00:07: [io 0x0400-0x047f] has been reserved >> [ 1.235073] system 00:07: [io 0x0500-0x057f] has been reserved >> [ 1.235140] system 00:07: [io 0xef80-0xef9f] has been reserved >> [ 1.235223] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) >> [ 1.235230] pnp 00:08: [io 0x0070-0x0077] >> [ 1.235236] pnp 00:08: [irq 8] >> [ 1.235266] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) >> [ 1.235378] pnp 00:09: [io 0x0060] >> [ 1.235380] pnp 00:09: [io 0x0064] >> [ 1.235386] pnp 00:09: [irq 1] >> [ 1.235420] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) >> [ 1.235431] pnp 00:0a: [irq 12] >> [ 1.235459] pnp 00:0a: Plug and Play ACPI device, IDs SYN0179 >> SYN0100 SYN0002 PNP0f13 (active) >> [ 1.235658] pnp 00:0b: [irq 23] >> [ 1.235696] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active) >> [ 1.235808] pnp 00:0c: [bus ff] >> [ 1.235848] pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active) >> [ 1.235958] pnp: PnP ACPI: found 13 devices >> [ 1.236019] ACPI: ACPI bus type pnp unregistered >> [ 1.242789] PCI: max bus depth: 1 pci_try_num: 2 >> [ 1.242843] pci 0000:00:1c.1: BAR 15: assigned [mem >> 0xd4a00000-0xd4bfffff 64bit pref] >> [ 1.242939] pci 0000:00:1c.0: PCI bridge to [bus 01-01] >> [ 1.243008] pci 0000:00:1c.0: bridge window [mem 0xd4700000-0xd47fffff] >> [ 1.243086] pci 0000:00:1c.1: PCI bridge to [bus 02-42] >> [ 1.243161] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] >> [ 1.243233] pci 0000:00:1c.1: bridge window [mem 0xd0700000-0xd46fffff] >> [ 1.243305] pci 0000:00:1c.1: bridge window [mem >> 0xd4a00000-0xd4bfffff 64bit pref] >> [ 1.243407] pci 0000:00:1c.2: PCI bridge to [bus 43-43] >> [ 1.243475] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd06fffff] >> [ 1.243553] pci 0000:00:1c.3: PCI bridge to [bus 44-44] >> [ 1.243621] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff] >> [ 1.243699] pci 0000:00:1e.0: PCI bridge to [bus 45-45] >> [ 1.243769] pci 0000:00:1e.0: bridge window [mem 0xd0400000-0xd04fffff] >> [ 1.243861] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >> [ 1.243934] pci 0000:00:1c.0: setting latency timer to 64 >> [ 1.243945] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 >> [ 1.244018] pci 0000:00:1c.1: setting latency timer to 64 >> [ 1.244028] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 >> [ 1.244101] pci 0000:00:1c.2: setting latency timer to 64 >> [ 1.244111] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 >> [ 1.244184] pci 0000:00:1c.3: setting latency timer to 64 >> [ 1.244191] pci 0000:00:1e.0: setting latency timer to 64 >> [ 1.244196] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] >> [ 1.244198] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] >> [ 1.244199] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] >> [ 1.244201] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff] >> [ 1.244203] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff] >> [ 1.244204] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff] >> [ 1.244206] pci_bus 0000:01: resource 1 [mem 0xd4700000-0xd47fffff] >> [ 1.244208] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff] >> [ 1.244210] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd46fffff] >> [ 1.244212] pci_bus 0000:02: resource 2 [mem 0xd4a00000-0xd4bfffff >> 64bit pref] >> [ 1.244214] pci_bus 0000:43: resource 1 [mem 0xd0600000-0xd06fffff] >> [ 1.244216] pci_bus 0000:44: resource 1 [mem 0xd0500000-0xd05fffff] >> [ 1.244218] pci_bus 0000:45: resource 1 [mem 0xd0400000-0xd04fffff] >> [ 1.244220] pci_bus 0000:45: resource 4 [io 0x0000-0x0cf7] >> [ 1.244222] pci_bus 0000:45: resource 5 [io 0x0d00-0xffff] >> [ 1.244223] pci_bus 0000:45: resource 6 [mem 0x000a0000-0x000bffff] >> [ 1.244225] pci_bus 0000:45: resource 7 [mem 0xc0000000-0xdfffffff] >> [ 1.244227] pci_bus 0000:45: resource 8 [mem 0xf0000000-0xfedfffff] >> [ 1.244229] pci_bus 0000:45: resource 9 [mem 0xfee01000-0xffffffff] >> [ 1.244263] NET: Registered protocol family 2 >> [ 1.244441] IP route cache hash table entries: 131072 (order: 8, >> 1048576 bytes) >> [ 1.245240] TCP established hash table entries: 524288 (order: 11, >> 8388608 bytes) >> [ 1.246949] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >> [ 1.247249] TCP: Hash tables configured (established 524288 bind 65536) >> [ 1.247319] TCP reno registered >> [ 1.247387] UDP hash table entries: 2048 (order: 4, 65536 bytes) >> [ 1.247476] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) >> [ 1.247641] NET: Registered protocol family 1 >> [ 1.247721] pci 0000:00:02.0: Boot video device >> [ 1.247741] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> [ 1.247845] pci 0000:00:1a.0: PCI INT A disabled >> [ 1.247938] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >> [ 1.248036] pci 0000:00:1d.0: PCI INT A disabled >> [ 1.248137] PCI: CLS 64 bytes, default 64 >> [ 1.248139] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >> [ 1.248208] Placing 64MB software IO TLB between ffff8800b6fc9000 - >> ffff8800bafc9000 >> [ 1.248304] software IO TLB at phys 0xb6fc9000 - 0xbafc9000 >> [ 1.248841] audit: initializing netlink socket (disabled) >> [ 1.248920] type=2000 audit(1348478288.088:1): initialized >> [ 1.269455] HugeTLB registered 2 MB page size, pre-allocated 0 pages >> [ 1.271294] VFS: Disk quotas dquot_6.5.2 >> [ 1.271401] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >> [ 1.271887] fuse init (API version 7.17) >> [ 1.272024] msgmni has been set to 7489 >> [ 1.272476] Block layer SCSI generic (bsg) driver version 0.4 >> loaded (major 253) >> [ 1.272601] io scheduler noop registered >> [ 1.272664] io scheduler deadline registered >> [ 1.272752] io scheduler cfq registered (default) >> [ 1.272911] pcieport 0000:00:1c.0: setting latency timer to 64 >> [ 1.272969] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X >> [ 1.273051] pcieport 0000:00:1c.1: setting latency timer to 64 >> [ 1.273101] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X >> [ 1.273188] pcieport 0000:00:1c.2: setting latency timer to 64 >> [ 1.273237] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X >> [ 1.273314] pcieport 0000:00:1c.3: setting latency timer to 64 >> [ 1.273363] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X >> [ 1.273459] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt >> [ 1.273533] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded >> [ 1.273552] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt >> [ 1.273625] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded >> [ 1.273642] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt >> [ 1.273714] pci 0000:43:00.0: Signaling PME through PCIe PME interrupt >> [ 1.273783] pci 0000:43:00.1: Signaling PME through PCIe PME interrupt >> [ 1.273852] pci 0000:43:00.2: Signaling PME through PCIe PME interrupt >> [ 1.274506] pci 0000:43:00.3: Signaling PME through PCIe PME interrupt >> [ 1.274578] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded >> [ 1.274596] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt >> [ 1.274666] pci 0000:44:00.0: Signaling PME through PCIe PME interrupt >> [ 1.274737] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded >> [ 1.274749] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >> [ 1.274872] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 >> device_id 3b44 ss_vid 103c ss_did 146d >> [ 1.274994] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded >> [ 1.275000] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 >> [ 1.275131] intel_idle: MWAIT substates: 0x1120 >> [ 1.275133] intel_idle: v0.4 model 0x25 >> [ 1.275134] intel_idle: lapic_timer_reliable_states 0xffffffff >> [ 1.275279] ACPI: Deprecated procfs I/F for AC is loaded, please >> retry with CONFIG_ACPI_PROCFS_POWER cleared >> [ 1.275464] ACPI: AC Adapter [AC] (on-line) >> [ 1.275712] input: Sleep Button as >> /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 >> [ 1.275815] ACPI: Sleep Button [SLPB] >> [ 1.275907] input: Lid Switch as >> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 >> [ 1.276025] ACPI: Lid Switch [LID] >> [ 1.276113] input: Power Button as >> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 >> [ 1.276210] ACPI: Power Button [PWRF] >> [ 1.283935] thermal LNXTHERM:00: registered as thermal_zone0 >> [ 1.284002] ACPI: Thermal Zone [EXTZ] (23 C) >> [ 1.284098] thermal LNXTHERM:01: registered as thermal_zone1 >> [ 1.284165] ACPI: Thermal Zone [EX2Z] (0 C) >> [ 1.284268] thermal LNXTHERM:02: registered as thermal_zone2 >> [ 1.284334] ACPI: Thermal Zone [PWMZ] (0 C) >> [ 1.286920] thermal LNXTHERM:03: registered as thermal_zone3 >> [ 1.286987] ACPI: Thermal Zone [LOCZ] (24 C) >> [ 1.287435] thermal LNXTHERM:04: registered as thermal_zone4 >> [ 1.287502] ACPI: Thermal Zone [GFXZ] (0 C) >> [ 1.298707] thermal LNXTHERM:05: registered as thermal_zone5 >> [ 1.298774] ACPI: Thermal Zone [BATZ] (20 C) >> [ 1.308382] thermal LNXTHERM:06: registered as thermal_zone6 >> [ 1.308449] ACPI: Thermal Zone [EGXZ] (0 C) >> [ 1.308757] thermal LNXTHERM:07: registered as thermal_zone7 >> [ 1.308823] ACPI: Thermal Zone [CPUZ] (127 C) >> [ 1.309028] thermal LNXTHERM:08: registered as thermal_zone8 >> [ 1.309096] ACPI: Thermal Zone [MCHZ] (0 C) >> [ 1.309296] thermal LNXTHERM:09: registered as thermal_zone9 >> [ 1.309363] ACPI: Thermal Zone [PCHZ] (59 C) >> [ 1.309445] ACPI: Deprecated procfs I/F for battery is loaded, >> please retry with CONFIG_ACPI_PROCFS_POWER cleared >> [ 1.309554] ACPI: Battery Slot [BAT0] (battery absent) >> [ 1.309629] ACPI: Deprecated procfs I/F for battery is loaded, >> please retry with CONFIG_ACPI_PROCFS_POWER cleared >> [ 1.309642] ACPI: Battery Slot [BAT0] (battery absent) >> [ 1.309799] ACPI: Battery Slot [BAT1] (battery absent) >> [ 1.309864] ACPI: Battery Slot [BAT1] (battery absent) >> [ 1.309952] ERST: Table is not found! >> [ 1.310013] GHES: HEST is not enabled! >> [ 1.310140] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled >> [ 1.503094] Linux agpgart interface v0.103 >> [ 1.503224] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset >> [ 1.503380] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K >> total, 262144K mappable >> [ 1.504241] agpgart-intel 0000:00:00.0: detected 32768K stolen memory >> [ 1.504466] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 >> [ 1.505825] brd: module loaded >> [ 1.506532] loop: module loaded >> [ 1.506736] ahci 0000:00:1f.2: version 3.0 >> [ 1.506759] ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 >> [ 1.506880] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X >> [ 1.506917] ahci: SSS flag set, parallel bus scan disabled >> [ 1.522717] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 >> Gbps 0x37 impl SATA mode >> [ 1.522822] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led >> clo pio slum part ems sxs apst >> [ 1.522925] ahci 0000:00:1f.2: setting latency timer to 64 >> [ 1.555071] scsi0 : ahci >> [ 1.555225] scsi1 : ahci >> [ 1.555349] scsi2 : ahci >> [ 1.555474] scsi3 : ahci >> [ 1.555600] scsi4 : ahci >> [ 1.555722] scsi5 : ahci >> [ 1.555973] ata1: SATA max UDMA/133 abar m2048@0xd4827000 port >> 0xd4827100 irq 44 >> [ 1.556070] ata2: SATA max UDMA/133 abar m2048@0xd4827000 port >> 0xd4827180 irq 44 >> [ 1.556167] ata3: SATA max UDMA/133 abar m2048@0xd4827000 port >> 0xd4827200 irq 44 >> [ 1.556264] ata4: DUMMY >> [ 1.556321] ata5: SATA max UDMA/133 abar m2048@0xd4827000 port >> 0xd4827300 irq 44 >> [ 1.556418] ata6: SATA max UDMA/133 abar m2048@0xd4827000 port >> 0xd4827380 irq 44 >> [ 1.556811] Fixed MDIO Bus: probed >> [ 1.556886] tun: Universal TUN/TAP device driver, 1.6 >> [ 1.556950] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> >> [ 1.557086] PPP generic driver version 2.4.2 >> [ 1.557262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >> [ 1.557346] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> [ 1.557436] ehci_hcd 0000:00:1a.0: setting latency timer to 64 >> [ 1.557440] ehci_hcd 0000:00:1a.0: EHCI Host Controller >> [ 1.557555] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned >> bus number 1 >> [ 1.557679] ehci_hcd 0000:00:1a.0: debug port 2 >> [ 1.561630] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported >> [ 1.561645] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4829000 >> [ 1.574587] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >> [ 1.574784] hub 1-0:1.0: USB hub found >> [ 1.574848] hub 1-0:1.0: 2 ports detected >> [ 1.574966] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >> [ 1.575049] ehci_hcd 0000:00:1d.0: setting latency timer to 64 >> [ 1.575052] ehci_hcd 0000:00:1d.0: EHCI Host Controller >> [ 1.575163] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned >> bus number 2 >> [ 1.575282] ehci_hcd 0000:00:1d.0: debug port 2 >> [ 1.579242] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported >> [ 1.579257] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd4828000 >> [ 1.594551] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >> [ 1.594740] hub 2-0:1.0: USB hub found >> [ 1.594803] hub 2-0:1.0: 2 ports detected >> [ 1.594913] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >> [ 1.594989] uhci_hcd: USB Universal Host Controller Interface driver >> [ 1.595094] usbcore: registered new interface driver libusual >> [ 1.595192] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] >> at 0x60,0x64 irq 1,12 >> [ 1.597010] i8042: Detected active multiplexing controller, rev 1.1 >> [ 1.597848] serio: i8042 KBD port at 0x60,0x64 irq 1 >> [ 1.597916] serio: i8042 AUX0 port at 0x60,0x64 irq 12 >> [ 1.597985] serio: i8042 AUX1 port at 0x60,0x64 irq 12 >> [ 1.598090] serio: i8042 AUX2 port at 0x60,0x64 irq 12 >> [ 1.598171] serio: i8042 AUX3 port at 0x60,0x64 irq 12 >> [ 1.598322] mousedev: PS/2 mouse device common for all mice >> [ 1.598559] rtc_cmos 00:08: RTC can wake from S4 >> [ 1.598728] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 >> [ 1.598826] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs >> [ 1.598958] device-mapper: uevent: version 1.0.3 >> [ 1.599084] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) >> initialised: dm-devel@xxxxxxxxxx >> [ 1.599266] cpuidle: using governor ladder >> [ 1.599446] cpuidle: using governor menu >> [ 1.599506] EFI Variables Facility v0.08 2004-May-17 >> [ 1.599764] TCP cubic registered >> [ 1.599902] NET: Registered protocol family 10 >> [ 1.600360] NET: Registered protocol family 17 >> [ 1.600426] Registering the dns_resolver key type >> [ 1.600615] PM: Hibernation image not present or could not be loaded. >> [ 1.600628] registered taskstats version 1 >> [ 1.610898] Magic number: 12:47:324 >> [ 1.611016] tty tty49: hash matches >> [ 1.611110] acpi PNP0B00:00: hash matches >> [ 1.611269] rtc_cmos 00:08: setting system clock to 2012-09-24 >> 09:18:09 UTC (1348478289) >> [ 1.612256] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found >> [ 1.612323] EDD information not available. >> [ 1.621072] input: AT Translated Set 2 keyboard as >> /devices/platform/i8042/serio0/input/input3 >> [ 1.874156] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 1.874974] ata1.00: unexpected _GTF length (8) >> [ 1.875315] ata1.00: ATA-8: Hitachi HTS725032A9A364, PC3OC72E, max >> UDMA/100 >> [ 1.875389] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), >> AA >> [ 1.876412] ata1.00: unexpected _GTF length (8) >> [ 1.876746] ata1.00: configured for UDMA/100 >> [ 1.877162] scsi 0:0:0:0: Direct-Access ATA Hitachi >> HTS72503 PC3O PQ: 0 ANSI: 5 >> [ 1.877480] sd 0:0:0:0: Attached scsi generic sg0 type 0 >> [ 1.877527] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: >> (320 GB/298 GiB) >> [ 1.877680] sd 0:0:0:0: [sda] Write Protect is off >> [ 1.877770] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> [ 1.877844] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >> enabled, doesn't support DPO or FUA >> [ 1.886134] usb 1-1: new high-speed USB device number 2 using ehci_hcd >> [ 1.940007] sda: sda1 sda2 sda3 < sda5 sda6 > >> [ 1.941565] sd 0:0:0:0: [sda] Attached SCSI disk >> [ 2.018847] hub 1-1:1.0: USB hub found >> [ 2.019040] hub 1-1:1.0: 6 ports detected >> [ 2.129745] usb 2-1: new high-speed USB device number 2 using ehci_hcd >> [ 2.193604] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 2.213233] ata2.00: unexpected _GTF length (8) >> [ 2.213304] ata2.00: ATAPI: hp CDDVDW TS-L633N, 0300, max UDMA/100 >> [ 2.234760] ata2.00: unexpected _GTF length (8) >> [ 2.234831] ata2.00: configured for UDMA/100 >> [ 2.240009] scsi 1:0:0:0: CD-ROM hp CDDVDW >> TS-L633N 0300 PQ: 0 ANSI: 5 >> [ 2.245488] Refined TSC clocksource calibration: 2393.996 MHz. >> [ 2.245562] Switching to clocksource tsc >> [ 2.248583] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw >> xa/form2 cdda tray >> [ 2.248674] cdrom: Uniform CD-ROM driver Revision: 3.20 >> [ 2.248977] sr 1:0:0:0: Attached scsi CD-ROM sr0 >> [ 2.249182] sr 1:0:0:0: Attached scsi generic sg1 type 5 >> [ 2.262328] hub 2-1:1.0: USB hub found >> [ 2.262465] hub 2-1:1.0: 8 ports detected >> [ 2.333496] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd >> [ 2.497215] usb 1-1.5: new high-speed USB device number 4 using ehci_hcd >> [ 2.568948] ata3: SATA link down (SStatus 0 SControl 300) >> [ 2.888390] ata5: SATA link down (SStatus 0 SControl 300) >> [ 3.207839] ata6: SATA link down (SStatus 0 SControl 300) >> [ 3.209564] Freeing unused kernel memory: 920k freed >> [ 3.210355] Write protecting the kernel read-only data: 12288k >> [ 3.215443] Freeing unused kernel memory: 1616k freed >> [ 3.219422] Freeing unused kernel memory: 1200k freed >> [ 3.239703] udevd[109]: starting version 175 >> [ 3.266328] [drm] Initialized drm 1.1.0 20060810 >> [ 3.266529] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k >> [ 3.266591] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. >> [ 3.266691] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 >> [ 3.266771] e1000e 0000:00:19.0: setting latency timer to 64 >> [ 3.266910] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X >> [ 3.272545] firewire_ohci 0000:43:00.3: PCI INT D -> GSI 17 (level, >> low) -> IRQ 17 >> [ 3.272641] firewire_ohci 0000:43:00.3: setting latency timer to 64 >> [ 3.274152] sdhci: Secure Digital Host Controller Interface driver >> [ 3.274219] sdhci: Copyright(c) Pierre Ossman >> [ 3.277077] wmi: Mapper loaded >> [ 3.335711] firewire_ohci: Added fw-ohci device 0000:43:00.3, OHCI >> v1.10, 4 IR + 4 IT contexts, quirks 0x11 >> [ 3.335942] sdhci-pci 0000:43:00.0: SDHCI controller found >> [1180:e822] (rev 1) >> [ 3.336053] sdhci-pci 0000:43:00.0: PCI INT A -> GSI 18 (level, >> low) -> IRQ 18 >> [ 3.336220] sdhci-pci 0000:43:00.0: Will use DMA mode even though >> HW doesn't fully claim to support it. >> [ 3.336329] sdhci-pci 0000:43:00.0: setting latency timer to 64 >> [ 3.336349] mmc0: no vmmc regulator found >> [ 3.336442] Registered led device: mmc0:: >> [ 3.337484] mmc0: SDHCI controller on PCI [0000:43:00.0] using DMA >> [ 3.483459] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width >> x1) 1c:c1:de:b2:a6:2e >> [ 3.483565] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network >> Connection >> [ 3.483681] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: FFFFFF-0FF >> [ 3.483849] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> [ 3.483923] i915 0000:00:02.0: setting latency timer to 64 >> [ 3.527006] i915 0000:00:02.0: irq 46 for MSI/MSI-X >> [ 3.527011] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). >> [ 3.527084] [drm] Driver supports precise vblank timestamp query. >> [ 3.527189] vgaarb: device changed decodes: >> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem >> [ 3.834963] firewire_core: created device fw0: GUID 5566778811223344, >> S400 >> [ 4.059486] fbcon: inteldrmfb (fb0) is primary device >> [ 4.325380] Console: switching to colour frame buffer device 200x56 >> [ 4.328798] fb0: inteldrmfb frame buffer device >> [ 4.328800] drm: registered panic notifier >> [ 4.333758] acpi device:0e: registered as cooling_device4 >> [ 4.334005] input: Video Bus as >> /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4 >> [ 4.334122] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) >> [ 4.334223] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 >> [ 4.766990] EXT4-fs (sda5): mounted filesystem with ordered data >> mode. Opts: (null) >> [ 24.352058] ADDRCONF(NETDEV_UP): eth0: link is not ready >> [ 24.372676] udevd[409]: starting version 175 >> [ 24.384405] lp: driver loaded but no devices found >> [ 24.432637] Adding 4881404k swap on /dev/sda6. Priority:-1 >> extents:1 across:4881404k >> [ 24.456744] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16) >> [ 24.470523] hp_accel: hardware type HPB64xx found >> [ 24.471766] mei: module is from the staging directory, the quality >> is unknown, you have been warned. >> [ 24.472194] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >> [ 24.472202] mei 0000:00:16.0: setting latency timer to 64 >> [ 24.472280] mei 0000:00:16.0: irq 47 for MSI/MSI-X >> [ 24.472337] lis3lv02d: 8 bits sensor found >> [ 24.477930] Blacklisted intel_ips for HP ProBook >> [ 24.484742] lib80211: common routines for IEEE802.11 drivers >> [ 24.484745] lib80211_crypt: registered algorithm 'NULL' >> [ 24.493959] wl: module license 'MIXED/Proprietary' taints kernel. >> [ 24.493963] Disabling lock debugging due to kernel taint >> [ 24.504026] wl 0000:44:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 >> [ 24.504038] wl 0000:44:00.0: setting latency timer to 64 >> [ 24.527069] input: ST LIS3LV02DL Accelerometer as >> /devices/platform/lis3lv02d/input/input5 >> [ 24.527233] Registered led device: hp::hddprotect >> [ 24.527263] hp_accel: driver loaded >> [ 24.531646] udevd[425]: renamed network interface eth0 to eth3 >> [ 24.541272] Linux video capture interface: v2.00 >> [ 24.541711] uvcvideo: Found UVC 1.00 device Villem (0461:4db6) >> [ 24.542995] lib80211_crypt: registered algorithm 'TKIP' >> [ 24.543303] eth0: Broadcom BCM4727 802.11 Hybrid Wireless >> Controller 5.100.82.38 >> [ 24.551061] input: Villem as >> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input6 >> [ 24.551230] usbcore: registered new interface driver uvcvideo >> [ 24.551233] USB Video Class driver (1.1.1) >> [ 24.620129] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 >> [ 24.620140] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0 >> [ 24.620153] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, >> low) -> IRQ 16 >> [ 24.620259] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X >> [ 24.620299] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 >> [ 24.644948] type=1400 audit(1348474712.569:2): apparmor="STATUS" >> operation="profile_load" name="/sbin/dhclient" pid=676 >> comm="apparmor_parser" >> [ 24.644957] type=1400 audit(1348474712.569:3): apparmor="STATUS" >> operation="profile_replace" name="/sbin/dhclient" pid=593 >> comm="apparmor_parser" >> [ 24.645422] type=1400 audit(1348474712.569:4): apparmor="STATUS" >> operation="profile_load" >> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=676 >> comm="apparmor_parser" >> [ 24.645432] type=1400 audit(1348474712.569:5): apparmor="STATUS" >> operation="profile_replace" >> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=593 >> comm="apparmor_parser" >> [ 24.645704] type=1400 audit(1348474712.569:6): apparmor="STATUS" >> operation="profile_load" >> name="/usr/lib/connman/scripts/dhclient-script" pid=676 >> comm="apparmor_parser" >> [ 24.645715] type=1400 audit(1348474712.569:7): apparmor="STATUS" >> operation="profile_replace" >> name="/usr/lib/connman/scripts/dhclient-script" pid=593 >> comm="apparmor_parser" >> [ 24.648408] type=1400 audit(1348474712.573:8): apparmor="STATUS" >> operation="profile_load" name="/usr/sbin/ntpd" pid=800 >> comm="apparmor_parser" >> [ 24.649172] type=1400 audit(1348474712.573:9): apparmor="STATUS" >> operation="profile_replace" name="/usr/sbin/ntpd" pid=802 >> comm="apparmor_parser" >> [ 24.679398] udevd[422]: renamed network interface eth0 to eth1 >> [ 24.687350] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0 >> [ 24.687414] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 >> [ 24.687471] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 >> [ 24.687569] input: HDA Intel HDMI/DP,pcm=8 as >> /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 >> [ 24.688100] input: HDA Intel HDMI/DP,pcm=7 as >> /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 >> [ 24.689681] input: HDA Intel HDMI/DP,pcm=3 as >> /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 >> [ 24.690034] input: HDA Intel Line as >> /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 >> [ 24.690184] input: HDA Intel Mic as >> /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 >> [ 24.690333] input: HDA Intel Dock Headphone as >> /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 >> [ 24.690485] input: HDA Intel Headphone as >> /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 >> [ 24.758861] EXT4-fs (sda5): re-mounted. Opts: errors=remount- >> ro,user_xattr >> [ 24.826745] input: HP WMI hotkeys as /devices/virtual/input/input14 >> [ 25.142935] init: failsafe main process (957) killed by TERM signal >> [ 25.303817] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, >> id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 >> [ 25.304623] Bluetooth: Core ver 2.16 >> [ 25.304650] NET: Registered protocol family 31 >> [ 25.304652] Bluetooth: HCI device and connection manager initialized >> [ 25.304655] Bluetooth: HCI socket layer initialized >> [ 25.304657] Bluetooth: L2CAP socket layer initialized >> [ 25.304663] Bluetooth: SCO socket layer initialized >> [ 25.307802] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 >> [ 25.307806] Bluetooth: BNEP filters: protocol multicast >> [ 25.313731] Bluetooth: RFCOMM TTY layer initialized >> [ 25.313737] Bluetooth: RFCOMM socket layer initialized >> [ 25.313739] Bluetooth: RFCOMM ver 1.11 >> [ 25.341266] type=1400 audit(1348474713.265:10): apparmor="STATUS" >> operation="profile_replace" name="/sbin/dhclient" pid=1056 >> comm="apparmor_parser" >> [ 25.341719] type=1400 audit(1348474713.269:11): apparmor="STATUS" >> operation="profile_replace" >> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1056 >> comm="apparmor_parser" >> [ 25.349915] input: SynPS/2 Synaptics TouchPad as >> /devices/platform/i8042/serio4/input/input15 >> [ 25.383995] ppdev: user-space parallel port driver >> [ 25.481592] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X >> [ 25.537333] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X >> [ 25.537896] ADDRCONF(NETDEV_UP): eth3: link is not ready >> [ 25.538313] ADDRCONF(NETDEV_UP): eth3: link is not ready >> [ 25.540084] ADDRCONF(NETDEV_UP): eth1: link is not ready >> [ 25.607191] init: gdm main process (1159) killed by TERM signal >> [ 28.726332] e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow >> Control: Rx >> [ 28.726737] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready >> [ 39.465232] eth3: no IPv6 routers present >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
