[PATCH v1 1/3] gpiolib: Align FLAG_* definitions in the struct gpio_desc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Align FLAG_* definitions in the struct gpio_desc for better readability.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/gpio/gpiolib.h | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 7663c9caebaf..65db879d1c74 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -183,24 +183,24 @@ struct gpio_desc {
 	struct gpio_device	*gdev;
 	unsigned long		flags;
 /* flag symbols are bit numbers */
-#define FLAG_REQUESTED	0
-#define FLAG_IS_OUT	1
-#define FLAG_EXPORT	2	/* protected by sysfs_lock */
-#define FLAG_SYSFS	3	/* exported via /sys/class/gpio/control */
-#define FLAG_ACTIVE_LOW	6	/* value has active low */
-#define FLAG_OPEN_DRAIN	7	/* Gpio is open drain type */
-#define FLAG_OPEN_SOURCE 8	/* Gpio is open source type */
-#define FLAG_USED_AS_IRQ 9	/* GPIO is connected to an IRQ */
-#define FLAG_IRQ_IS_ENABLED 10	/* GPIO is connected to an enabled IRQ */
-#define FLAG_IS_HOGGED	11	/* GPIO is hogged */
-#define FLAG_TRANSITORY 12	/* GPIO may lose value in sleep or reset */
-#define FLAG_PULL_UP    13	/* GPIO has pull up enabled */
-#define FLAG_PULL_DOWN  14	/* GPIO has pull down enabled */
-#define FLAG_BIAS_DISABLE    15	/* GPIO has pull disabled */
-#define FLAG_EDGE_RISING     16	/* GPIO CDEV detects rising edge events */
-#define FLAG_EDGE_FALLING    17	/* GPIO CDEV detects falling edge events */
-#define FLAG_EVENT_CLOCK_REALTIME	18 /* GPIO CDEV reports REALTIME timestamps in events */
-#define FLAG_EVENT_CLOCK_HTE		19 /* GPIO CDEV reports hardware timestamps in events */
+#define FLAG_REQUESTED			0
+#define FLAG_IS_OUT			1
+#define FLAG_EXPORT			2	/* protected by sysfs_lock */
+#define FLAG_SYSFS			3	/* exported via /sys/class/gpio/control */
+#define FLAG_ACTIVE_LOW			6	/* value has active low */
+#define FLAG_OPEN_DRAIN			7	/* Gpio is open drain type */
+#define FLAG_OPEN_SOURCE		8	/* Gpio is open source type */
+#define FLAG_USED_AS_IRQ		9	/* GPIO is connected to an IRQ */
+#define FLAG_IRQ_IS_ENABLED		10	/* GPIO is connected to an enabled IRQ */
+#define FLAG_IS_HOGGED			11	/* GPIO is hogged */
+#define FLAG_TRANSITORY			12	/* GPIO may lose value in sleep or reset */
+#define FLAG_PULL_UP			13	/* GPIO has pull up enabled */
+#define FLAG_PULL_DOWN			14	/* GPIO has pull down enabled */
+#define FLAG_BIAS_DISABLE		15	/* GPIO has pull disabled */
+#define FLAG_EDGE_RISING		16	/* GPIO CDEV detects rising edge events */
+#define FLAG_EDGE_FALLING		17	/* GPIO CDEV detects falling edge events */
+#define FLAG_EVENT_CLOCK_REALTIME	18	/* GPIO CDEV reports REALTIME timestamps in events */
+#define FLAG_EVENT_CLOCK_HTE		19	/* GPIO CDEV reports hardware timestamps in events */
 
 	/* Connection label */
 	struct gpio_desc_label __rcu *label;
-- 
2.47.2





[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux