Hello. I cannot seem to get KNOPPIX v7.0.4 and Ubuntu v12.04.1 i386 live CDs to see an old Creative Modem Blaster V.92 USB (DE5671 Model) dial-up modem. It worked fine in Windows (XP SP3 to 64-bit 7) on two machines. When I plugged it in during a KNOPPIX session, dmesg detects it. Ubuntu v12.04.1 i386 live CD detects something, but can't identify it. The Linux tests were on an old Dell Dimension 8250 (512 MB of RAM) machine. KNOPPIX's dmesg showed: ... [ 113.693346] usb 4-2: new full-speed USB device number 2 usinguhci_hcd [ 118.856286] usb 4-2: New USB device found, idVendor=148d, idProduct=1671 [ 118.856293] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 118.856297] usb 4-2: Product: Creative Modem Blaster V.92 USB [ 118.856300] usb 4-2: Manufacturer: Creative Pte Ltd. [ 118.856303] usb 4-2: SerialNumber: 00000000 Its lsusb command showed: Bus 004 Device 002: ID 148d:1671 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Weird that lsusb doesn't show the modem? I tried that scanModem script and here are the results: http://pastebin.com/raw.php?i=sqTeyNgP For now, I just want to see if KNOPPIX can communicate to this modem with its AT commands, but it doesn't seem to find the modem at all even though KNOPPIX's dmesg show detections. http://knoppix.net/forum/threads/30210-Dial-up-Modem-and-KNOPPIX-v7.0.4-Live-CD- 's reply told me to use v3 Kernel isn't supported and to use WvDial for the dial-up modem stuff: root@Microknoppix:/home/knoppix# wvdial --> WvDial: Internet dialer version 1.61 --> Cannot open /dev/modem: No such file or directory --> Cannot open /dev/modem: No such file or directory --> Cannot open /dev/modem: No such file or directory root@Microknoppix:/home/knoppix# wvdialconf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 ttyS4<Info>: No such device or address Modem Port Scan<*1>: S4 Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://alumnit.ca/wiki/?WvDial # cat /etc/wvdial.conf [Dialer Defaults] Phone = Username = Password = New PPPD = yes I don't need to dial out yet. Ubuntu's results were worse as shown in http://pastie.org/4755128 ... :( Thank you in advance. :) -- Quote of the Week: "Every ruler sleeps on an anthill." --Afghani /\___/\ Ant(Dude) @ http://antfarm.ma.cx (Personal Web Site) / /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net | |o o| | E-mail: philpi@xxxxxxxxxxxxx/ant@xxxxxxxxxx \ _ / If crediting, then please kindly use Ant nickname ( ) and AQFL URL/link.