I tried to get rid of the previous driver attempt. When I tried to
install the .tar.bz2 driver, when attempting to extract it I got this error:
tar (child): intel-536-537EP_2012_05_19.tar.bz2: Cannot open: No
such file or directory tar (child): Error is not recoverable:
exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
Wvdial conf says:
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200
baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3 S4 S5 S6 S7 S8 Modem Port
Scan<*1>: S9 S10 S11 S12 S13 S14 S15 S16 Modem Port Scan<*1>:
S17 S18 S19 S20 S21 S22 S23 S24 Modem Port Scan<*1>: S25
S26
S27 S28 S29 S30 S31
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://alumnit.ca/wiki/?WvDial
When I had the .deb installed it didn't edit the wvdial.conf file
in any way. However, the file that supposedly says the install was
successful was created.
I also haven't updated my system because I don't want to accidently
upgrade to a kernel that is not supported by the driver.
Thanks,
Andrew
-----Original Message-----
From: Antonio Olivares [mailto:olivares14031@xxxxxxxxx]
Sent: Sunday, June 17, 2012 11:09 PM
To: Andrew Merczynski-Hait
Cc: discuss@xxxxxxxxxxxxx; Philippe Vouters
Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
Andrew,
Would you mind posting posting
$ sudo wvdialconf /etc/wvdial.conf
after the apparent successful install of the driver. If the modem
device is not found, then something else is in the way, like the
output from scanModem shows some IRQ trouble:
\begin{QUOTE}
For candidate card in slot 01:01.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:01.0 8086:1080 1028:1000 Modem: Intel
Corporation FA82537EP 56K V.92 Data/Fax Modem PCI
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 01:01.0 ---- [
0.165277] pci 0000:01:01.0: [8086:1080] type 0 class 0x000703 [
0.165296] pci 0000:01:01.0: reg 10: [mem 0xfeafe000-0xfeafefff] [
0.165306] pci 0000:01:01.0: reg 14: [io 0xde00-0xdeff] [ 0.165366]
pci 0000:01:01.0: PME# supported from D0 D3hot D3cold [
0.165371] pci 0000:01:01.0: PME# disabled [ 0.640344] serial
0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 0.640536] 0000:01:01.0: ttyS5 at I/O 0xde08 (irq = 22) is a
16450 [ 0.640645] 0000:01:01.0: ttyS6 at I/O 0xde10 (irq = 22) is
a 8250 [ 0.640751] 0000:01:01.0: ttyS7 at I/O 0xde18 (irq = 22) is
a 16450 [ 0.640860] 0000:01:01.0: ttyS8 at I/O 0xde20 (irq = 22)
is a 8250 [ 0.640969] 0000:01:01.0: ttyS9 at I/O 0xde28 (irq = 22)
is a 8250 [ 0.641611] 0000:01:01.0: ttyS16 at I/O 0xde60 (irq =
22) is a 8250
The PCI slot 01:01.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
\end{QUOTE}
Please send us something so we could try to find out what is going on?
Regards,
Antonio
On Sun, Jun 17, 2012 at 9:53 PM, Andrew Merczynski-Hait
<andrewmh20@xxxxxxxxxx> wrote:
Thank you for your help.
I am not getting any errors like a kernel panic, the modem is just
not recognized by anything. However, Scanmodem does recognize it.
Nothing else will though.
Before I posted this I did a lot of Google searching and I think I
already tried your recommended method, and ran into problems
because of the fact that ubuntu puts the autoconf.h file in a
non-standard directory. I will try again and see what happens (and
in case I had a slightly different file or something), however if
it still doesn't work is there any way to fix the ubuntu issue, or
will it be necessary to
install a different distro?
Thanks,
Andrew
-----Original Message-----
From: Antonio Olivares [mailto:olivares14031@xxxxxxxxx]
Sent: Sunday, June 17, 2012 10:25 PM
To: Andrew Merczynski-Hait
Cc: discuss@xxxxxxxxxxxxx; Philippe Vouters
Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
Dear Andrew,
You have tried the driver but what do you get?
You need to provide more information. We do not know if you got a
kernel panic? a kernel mismatch?
I would recommend that you uninstall the driver that you have
installed and take a different approach, ie,
Download:
http://vouters.dyndns.org/Intel/intel-536EP-537EP_2012_05_19.tar.b
z2
Carefully read the document:
http://vouters.dyndns.org/Intel/Intel-Readme.html
Then proceed to take steps to see if your modem may work.
If you have downloaded the driver
intel-536-537EP_2012_05_19.tar.bz2,
copy it over to your Linux partition, then extract with $ tar
-jxvf
intel-536-537EP_2012_05_19.tar.bz2
$ cd intel-536-537
$ sudo make intel-536-537
$ sudo make install
$ sudo wvdialconf /etc/wvdial.conf
to see if scanmodem finds the modem.
Let us know how this goes.
Regards,
Antonio
On Sun, Jun 17, 2012 at 7:42 PM, Andrew Merczynski-Hait
<andrewmh20@xxxxxxxxxx> wrote:
SCANMODEM RECOGNIZES THE MODEM, BUT NOTHING ELSE SEEMS TO. I HAVE
TRIED A BUNCH OF MOSTLY RANDOM STUFF, AND HAVE ALREADY TRIED
USING THE .DEB PACKAGED 537EP DRIVERS FROM
https://sites.google.com/site/ubuntumodems/modem-driver-downloads-for-537ep.
THIS IS MY MODEM DATA.TXT FILE:
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx
List Server, as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 3.0.0-12-generic With
this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
YourCountry will enable Country specific guidance. Linux
experts in YourCountry can be found through:
http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential
for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider m`ail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org
-------------------------- System information
---------------------------- CPU=i686, Ubuntu ,
ALSA_version=1.0.24 Linux version 3.0.0-12-generic
(buildd@vernadsky) (gcc version 4.6.1 (Ubuntu/Linaro
4.6.1-9ubuntu3)
) #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 scanModem update of:
2011_08_08
Distrib_ID=Ubuntu
DistribCodeName=oneiric
AptRepositoryStem=http://us.archive.ubuntu.com/ubuntu/
Presently install your Linux Distributions dkms package. It
provides for automated driver updates, following upgrade of your
kernel. For details see
http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp.
JM20329 SATA Bridge ID 062a:0000 Creative Labs Optical mouse If
a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.h
tm
l
If a USB modem or cellphone is attached and was not detected,
please provide available information in your request to
discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
01:01.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax
Modem PCI (rev
04) High Definition Audio cards can host modem chips.
For candidate card in slot 01:01.0, firmware information and
bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:01.0 8086:1080 1028:1000 Modem: Intel
Corporation FA82537EP 56K V.92 Data/Fax Modem PCI
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 01:01.0 ---- [
0.165277] pci 0000:01:01.0: [8086:1080] type 0 class 0x000703 [
0.165296] pci
0000:01:01.0: reg 10: [mem 0xfeafe000-0xfeafefff] [ 0.165306] pci
0000:01:01.0: reg 14: [io 0xde00-0xdeff] [ 0.165366] pci
0000:01:01.0: PME# supported from D0 D3hot D3cold [ 0.165371]
pci
0000:01:01.0: PME# disabled [ 0.640344] serial 0000:01:01.0:
PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 0.640536] 0000:01:01.0: ttyS5 at I/O 0xde08 (irq = 22) is a
16450 [ 0.640645] 0000:01:01.0: ttyS6 at I/O 0xde10 (irq = 22)
is a 8250 [ 0.640751] 0000:01:01.0: ttyS7 at I/O 0xde18 (irq =
22) is a 16450 [ 0.640860] 0000:01:01.0: ttyS8 at I/O 0xde20
(irq = 22) is a 8250 [ 0.640969] 0000:01:01.0: ttyS9 at I/O
0xde28 (irq = 22) is a 8250 [ 0.641611] 0000:01:01.0: ttyS16 at
I/O 0xde60 (irq =
22) is a 8250
The PCI slot 01:01.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to
discuss@xxxxxxxxxxxxx if help is needed.
=== Finished firmware and bootup diagnostics, next deducing
cogent
software.
===
Predictive diagnostics for card in bus 01:01.0:
Modem chipset detected on
NAME="Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI "
CLASS=0703
PCIDEV=8086:1080
SUBSYS=1028:1000
IRQ=22
IDENT=INTEL537EP
For candidate modem in: 01:01.0
0703 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax
Modem PCI
Primary device ID: 8086:1080
Support type needed or chipset: INTEL537EP
Since 2006, Intel appears to have ceased its modem code updates
for
Linux.
The outdated official Intel support packages can be accessed through:
http://developer.intel.com/design/modems/support/drivers.htm
Beneficially, Philippe Vouters has been provided updates as the
Linux kernel evolves.
But intensive personal support is not feasible, see:
http://archives.linmodems.org/24939
The code for the INTEL537 and INTEL536 chipset modems is now at:
http://vouters.dyndns.org/Intel/ , previously
http://x9000.fr Copies are also stored at:
http://linmodems.technion.ac.il/packages/intel/Philippe.Vouters/
For Ubuntu Linux users with Intel 536 and 537 chipsets, there are
driver installation packages available thru
http://groups.google.com/group/ubuntu-modems
Read DOCs/Intel.txt and Modem/DOCs/YourSystem.txt for follow
through guidance.
Writing DOCs/Intel.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.6.1
and the compiler used in kernel assembly: 4.6.1
linux-headers-3.0.0-12-generic resources needed for compiling
are not manifestly ready!
The patch utility is needed for compiling ALSA drivers, and
possibly others.
If compiling is necessary packages must be installed, providing:
linux-headers-3.0.0-12-generic
If a driver compilation fails, with message including some lack
of some FileName.h (stdio.h for example), then Some additional
kernel-header files need installation to /usr/include. The
minimal additional packages are libc6-dev and any of its
dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available, $ apt-get
update $ apt-get -s install linux-kernel-devel will install needed packages.
For Debian/Ubuntu related distributions, run the following
command to display the needed package list:
Otherwise packages have to be found through
http://packages.ubuntu.com Once downloaded and transferred into a
Linux partition, they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options asyncmap 0 noauth crtscts
lock hide-password modem lcp-echo-interval 30 lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission
denied see
http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.ht
ml
For guidance on FAX usage, get from
http://linmodems.technion.ac.il/packages/ get faxing.tar.gz It
has samples for a modem using port /dev/ttySL0, which must be
changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels:
eth0 Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should
trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:#
blacklist snd-atiixp-modem /etc/modprobe.d/blacklist-modem.conf:#
blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options
snd-atiixp-modem
index=-2 /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem
index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
~Andrew Merczynski-Hait