Re: Andrew, United States, kernel 3.0.0-12-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Andrew & Phillipe

With respect to autoconf.h  problem under my Ubuntu, it sufficed to
(on one line):
$  sudo ln -s  /usr/src/linux-headers-$(uname
-r)/include/generated/autoconf.h /usr/src/linux-headers-$(uname
-r)/include/linux/autoconf.h

Then
$ export MODEM_TYPE=537
$ make 537
proceeded substantially.  But there was eventually the fatal error below.

Marvin
----------------


intel-536-537$ make 537
cd coredrv; make clean
make[1]: Entering directory `/home/marv/Downloads/tmp/intel-536-537/coredrv'
rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
rm -rf .tmp_versions
make[1]: Leaving directory `/home/marv/Downloads/tmp/intel-536-537/coredrv'
rm -f *.o *.ko
   Module precompile check
   Current running kernel is: 3.2.0-25-generic
   /lib/modules...   autoconf.h exists
diff: /boot/vmlinuz.autoconf.h: No such file or directory
   autoconf.h matches running kernel
diff: /boot/vmlinuz.version.h: No such file or directory
   version.h matches running kernel
make[1]: Entering directory `/home/marv/Downloads/tmp/intel-536-537'
Modem type not determined.
$ export MODEM_TYPE=<type>
with type=537 or 537EP or 537SP or 537EA or 537AA
make[1]: Leaving directory `/home/marv/Downloads/tmp/intel-536-537'
marv@marv-MacBookAir:~/Downloads/tmp/intel-536-537$ ls
537_boot  config_check  hamregistry    Intel536_inst  makefile
makefile_537  usrsound
537_inst  coredrv       Intel536_boot  license.txt    makefile_536  readme.txt
marv@marv-MacBookAir:~/Downloads/tmp/intel-536-537$ export MODEM_TYPE=537
marv@marv-MacBookAir:~/Downloads/tmp/intel-536-537$ make 537
cd coredrv; make clean
make[1]: Entering directory `/home/marv/Downloads/tmp/intel-536-537/coredrv'
rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
rm -rf .tmp_versions
make[1]: Leaving directory `/home/marv/Downloads/tmp/intel-536-537/coredrv'
rm -f *.o *.ko
   Module precompile check
   Current running kernel is: 3.2.0-25-generic
   /lib/modules...   autoconf.h exists
diff: /boot/vmlinuz.autoconf.h: No such file or directory
   autoconf.h matches running kernel
diff: /boot/vmlinuz.version.h: No such file or directory
   version.h matches running kernel
make[1]: Entering directory `/home/marv/Downloads/tmp/intel-536-537'
Building for 537
3.2.0-25-generic
make[2]: Entering directory `/home/marv/Downloads/tmp/intel-536-537/coredrv'
make -C /lib/modules/3.2.0-25-generic/build
M=/home/marv/Downloads/tmp/intel-536-537/coredrv modules
make[3]: Entering directory `/usr/src/linux-headers-3.2.0-25-generic'
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/coredrv.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/clmmain.o
/home/marv/Downloads/tmp/intel-536-537/coredrv/clmmain.c: In function
‘clm_terminate’:
/home/marv/Downloads/tmp/intel-536-537/coredrv/clmmain.c:271:9:
warning: "/*" within comment [-Wcomment]
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/rts.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/task.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/uart.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/wwh_dflt.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/locks.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/softserial_io.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/softserial_ioctl.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/softserial.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.o
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:115:18:
warning: conflicting types for built-in function ‘malloc’ [enabled by
default]
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c: In
function ‘modem_init’:
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:210:30:
warning: cast from pointer to integer of different size
[-Wpointer-to-int-cast]
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:215:30:
warning: cast from pointer to integer of different size
[-Wpointer-to-int-cast]
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:223:30:
warning: cast from pointer to integer of different size
[-Wpointer-to-int-cast]
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:235:30:
warning: cast from pointer to integer of different size
[-Wpointer-to-int-cast]
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c: In
function ‘modem_kill’:
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:320:25:
warning: cast to pointer from integer of different size
[-Wint-to-pointer-cast]
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c: Assembler messages:
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:339:
Error: unsupported for `mov'
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:345:
Error: unsupported for `mov'
make[4]: *** [/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.o]
Error 1
make[3]: *** [_module_/home/marv/Downloads/tmp/intel-536-537/coredrv] Error 2
make[3]: Leaving directory `/usr/src/linux-headers-3.2.0-25-generic'
make[2]: *** [537core_26] Error 2
make[2]: Leaving directory `/home/marv/Downloads/tmp/intel-536-537/coredrv'
/bin/bash: line 16: cd: coredrv: No such file or directory
make[2]: Entering directory `/home/marv/Downloads/tmp/intel-536-537/coredrv'
make -C /lib/modules/3.2.0-25-generic/build
M=/home/marv/Downloads/tmp/intel-536-537/coredrv modules
make[3]: Entering directory `/usr/src/linux-headers-3.2.0-25-generic'
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/coredrv.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/clmmain.o
/home/marv/Downloads/tmp/intel-536-537/coredrv/clmmain.c: In function
‘clm_terminate’:
/home/marv/Downloads/tmp/intel-536-537/coredrv/clmmain.c:271:9:
warning: "/*" within comment [-Wcomment]
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/rts.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/task.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/uart.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/wwh_dflt.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/locks.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/softserial_io.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/softserial_ioctl.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/softserial.o
  CC [M]  /home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.o
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:115:18:
warning: conflicting types for built-in function ‘malloc’ [enabled by
default]
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c: In
function ‘modem_init’:
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:210:30:
warning: cast from pointer to integer of different size
[-Wpointer-to-int-cast]
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:215:30:
warning: cast from pointer to integer of different size
[-Wpointer-to-int-cast]
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:223:30:
warning: cast from pointer to integer of different size
[-Wpointer-to-int-cast]
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:235:30:
warning: cast from pointer to integer of different size
[-Wpointer-to-int-cast]
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c: In
function ‘modem_kill’:
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:320:25:
warning: cast to pointer from integer of different size
[-Wint-to-pointer-cast]
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c: Assembler messages:
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:339:
Error: unsupported for `mov'
/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.c:345:
Error: unsupported for `mov'
make[4]: *** [/home/marv/Downloads/tmp/intel-536-537/coredrv/afedsp_int.o]
Error 1
make[3]: *** [_module_/home/marv/Downloads/tmp/intel-536-537/coredrv] Error 2
make[3]: Leaving directory `/usr/src/linux-headers-3.2.0-25-generic'
make[2]: *** [537core_26] Error 2atal error per below.






On Tue, Jun 19, 2012 at 2:31 PM, Andrew Merczynski-Hait
<andrewmh20@xxxxxxxxxx> wrote:
> Phillipe,
>
> I have read that, and that’s why I brought up the fact that I was on Ubuntu. Is there any fix I can use? Can I just move the autoconf.h?
>
> ~Andrew
>
> -----Original Message-----
> From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx]
> Sent: Tuesday, June 19, 2012 12:51 PM
> To: Marvin Stodolsky
> Cc: Andrew Merczynski-Hait; Antonio Olivares; Discuss
> Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
>
> Marv,
>
> Read about Ubuntu and autoconf.h at
> http://vouters.dyndns.org/Intel/Intel-Readme.html
> I want change anything to the code about this.
>
> Philippe Vouters (Fontainebleau/France)
> URL: http://vouters.dyndns.org/
> SIP: sip:Vouters@xxxxxxxxxxxxxxxx
>
> Le 19/06/2012 01:14, Marvin Stodolsky a écrit :
>> Andrew,
>>
>> You are correct.   intel-536EP-537EP_2012_05_19.tar.bz2 is only
>> tarred, but not bzip2 compressed,
>> though possible our System is automatically uncompressing during
>> downloading, through I doubt it.
>> Phillipe, please check
>>
>> It does open merely with:
>> $ tar xf intel*.tar.bz2
>> into folder intel-536-537/
>>
>> Afterward you will still have to install the  package autoconf, which
>> the makefile depends on, and Philipe will have to help too.
>>
>> Philippe, see below and
>> http://askubuntu.com/questions/65073/missing-linux-autoconf-h
>> Where should a fix be inserted into your makefiles?
>>
>>
>> Marvin
>>
>> --------------------
>> intel-536-537$ make 537
>> cd coredrv; make clean
>> make[1]: Entering directory `/home/marv/Downloads/tmp/intel-536-537/coredrv'
>> rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
>> into your makefilesrm -rf .tmp_versions
>> make[1]: Leaving directory `/home/marv/Downloads/tmp/intel-536-537/coredrv'
>> rm -f *.o *.ko
>>     Module precompile check
>>     Current running kernel is: 3.2.0-25-generic
>>     /lib/modules...   autoconf.h does not exist
>>     please install kernel source
>> make: *** [check] Error 1
>>
>>
>>
>>
>> On Mon, Jun 18, 2012 at 1:13 PM, Andrew Merczynski-Hait
>> <andrewmh20@xxxxxxxxxx> wrote:
>>> Then I get:
>>> bzip2: (stdin) is not a bzip2 file.
>>> Tar: Child returned status 2
>>> Tar: Error is not recoverable: exiting now
>>>
>>> -----Original Message-----
>>> From: Marvin Stodolsky [mailto:marvin.stodolsky@xxxxxxxxx]
>>> Sent: Monday, June 18, 2012 1:06 PM
>>> To: Andrew Merczynski-Hait
>>> Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
>>>
>>> typo, should be:
>>>   $ tar jxf intel*.tar.bz2
>>>
>>> On Mon, Jun 18, 2012 at 1:05 PM, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
>>>>   Andrew,
>>>>
>>>> in your home folder with the tar ball, the proper COMMAND is; $ tar
>>>> jxf intel*,tar.bz2 Then you still have to compile & install the
>>>> drivers.
>>>>
>>>> MarvS
>>>>
>>>> On Mon, Jun 18, 2012 at 12:46 PM, Andrew Merczynski-Hait
>>>> <andrewmh20@xxxxxxxxxx> wrote:
>>>>> I tried to get rid of the previous driver attempt. When I tried to
>>>>> install the .tar.bz2 driver, when attempting to extract it I got this error:
>>>>> tar (child): intel-536-537EP_2012_05_19.tar.bz2: Cannot open: No
>>>>> such file or directory tar (child): Error is not recoverable:
>>>>> exiting now
>>>>> tar: Child returned status 2
>>>>> tar: Error is not recoverable: exiting now
>>>>>
>>>>> Wvdial conf says:
>>>>> Editing `/etc/wvdial.conf'.
>>>>>
>>>>> Scanning your serial ports for a modem.
>>>>>
>>>>> ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
>>>>> ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200
>>>>> baud
>>>>> ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>>>>> Modem Port Scan<*1>: S1   S2   S3   S4   S5   S6   S7   S8 Modem Port
>>>>> Scan<*1>: S9   S10  S11  S12  S13  S14  S15  S16 Modem Port Scan<*1>:
>>>>> S17  S18  S19  S20  S21  S22  S23  S24 Modem Port Scan<*1>: S25
>>>>> S26
>>>>> S27  S28  S29  S30  S31
>>>>>
>>>>>
>>>>> Sorry, no modem was detected!  Is it in use by another program?
>>>>> Did you configure it properly with setserial?
>>>>>
>>>>> Please read the FAQ at http://alumnit.ca/wiki/?WvDial
>>>>>
>>>>> When I had the .deb installed it didn't edit the wvdial.conf file
>>>>> in any way. However, the file that supposedly says the install was
>>>>> successful was created.
>>>>>
>>>>> I also haven't updated my system because I don't want to accidently
>>>>> upgrade to a kernel that is not supported by the driver.
>>>>>
>>>>> Thanks,
>>>>> Andrew
>>>>>
>>>>> -----Original Message-----
>>>>> From: Antonio Olivares [mailto:olivares14031@xxxxxxxxx]
>>>>> Sent: Sunday, June 17, 2012 11:09 PM
>>>>> To: Andrew Merczynski-Hait
>>>>> Cc: discuss@xxxxxxxxxxxxx; Philippe Vouters
>>>>> Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
>>>>>
>>>>> Andrew,
>>>>>
>>>>> Would you mind posting posting
>>>>> $ sudo wvdialconf /etc/wvdial.conf
>>>>>
>>>>> after the apparent successful install of the driver.  If the modem
>>>>> device is not found, then something else is in the way, like the
>>>>> output from scanModem shows some IRQ trouble:
>>>>>
>>>>> \begin{QUOTE}
>>>>> For candidate card in slot 01:01.0, firmware information and bootup
>>>>> diagnostics are:
>>>>>   PCI slot       PCI ID          SubsystemID     Name
>>>>>   ----------     ---------       ---------       --------------
>>>>>   01:01.0        8086:1080       1028:1000       Modem: Intel
>>>>> Corporation FA82537EP 56K V.92 Data/Fax Modem PCI
>>>>>
>>>>>   Modem interrupt assignment and sharing:
>>>>>   --- Bootup diagnostics for card in PCI slot 01:01.0 ---- [
>>>>> 0.165277] pci 0000:01:01.0: [8086:1080] type 0 class 0x000703 [
>>>>> 0.165296] pci 0000:01:01.0: reg 10: [mem 0xfeafe000-0xfeafefff] [
>>>>> 0.165306] pci 0000:01:01.0: reg 14: [io  0xde00-0xdeff] [ 0.165366]
>>>>> pci 0000:01:01.0: PME# supported from D0 D3hot D3cold [
>>>>> 0.165371] pci 0000:01:01.0: PME# disabled [    0.640344] serial
>>>>> 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ
>>>>> 22
>>>>> [    0.640536] 0000:01:01.0: ttyS5 at I/O 0xde08 (irq = 22) is a
>>>>> 16450 [    0.640645] 0000:01:01.0: ttyS6 at I/O 0xde10 (irq = 22) is
>>>>> a 8250 [    0.640751] 0000:01:01.0: ttyS7 at I/O 0xde18 (irq = 22) is
>>>>> a 16450 [    0.640860] 0000:01:01.0: ttyS8 at I/O 0xde20 (irq = 22)
>>>>> is a 8250 [    0.640969] 0000:01:01.0: ttyS9 at I/O 0xde28 (irq = 22)
>>>>> is a 8250 [    0.641611] 0000:01:01.0: ttyS16 at I/O 0xde60 (irq =
>>>>> 22) is a 8250
>>>>>
>>>>>   The PCI slot 01:01.0 of the modem card may be disabled early in
>>>>> a bootup process,  but then enabled later. If modem drivers load
>>>>> but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>>>>>   Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>>>>> if help is needed.
>>>>> \end{QUOTE}
>>>>>
>>>>> Please send us something so we could try to find out what is going on?
>>>>>
>>>>> Regards,
>>>>>
>>>>>
>>>>> Antonio
>>>>>
>>>>>
>>>>> On Sun, Jun 17, 2012 at 9:53 PM, Andrew Merczynski-Hait
>>>>> <andrewmh20@xxxxxxxxxx> wrote:
>>>>>> Thank you for your help.
>>>>>>
>>>>>> I am not getting any errors like a kernel panic, the modem is just
>>>>>> not recognized by anything. However, Scanmodem does recognize it.
>>>>>> Nothing else will though.
>>>>>>
>>>>>> Before I posted this I did a lot of Google searching and I think I
>>>>>> already tried your recommended method, and ran into problems
>>>>>> because of the fact that ubuntu puts the autoconf.h file in a
>>>>>> non-standard directory. I will try again and see what happens (and
>>>>>> in case I had a slightly different file or something), however if
>>>>>> it still doesn't work is there any way to fix the ubuntu issue, or
>>>>>> will it be necessary to
>>>>> install a different distro?
>>>>>> Thanks,
>>>>>> Andrew
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Antonio Olivares [mailto:olivares14031@xxxxxxxxx]
>>>>>> Sent: Sunday, June 17, 2012 10:25 PM
>>>>>> To: Andrew Merczynski-Hait
>>>>>> Cc: discuss@xxxxxxxxxxxxx; Philippe Vouters
>>>>>> Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
>>>>>>
>>>>>> Dear Andrew,
>>>>>>
>>>>>> You have tried the driver but what do you get?
>>>>>>
>>>>>> You need to provide more information.  We do not know if you got a
>>>>>> kernel panic?  a kernel mismatch?
>>>>>>
>>>>>> I would recommend that you uninstall the driver that you have
>>>>>> installed and take a different approach, ie,
>>>>>>
>>>>>> Download:
>>>>>>
>>>>>> http://vouters.dyndns.org/Intel/intel-536EP-537EP_2012_05_19.tar.b
>>>>>> z2
>>>>>>
>>>>>> Carefully read the document:
>>>>>>
>>>>>> http://vouters.dyndns.org/Intel/Intel-Readme.html
>>>>>>
>>>>>> Then proceed to take steps to see if your modem may work.
>>>>>>
>>>>>> If you have downloaded the driver
>>>>>> intel-536-537EP_2012_05_19.tar.bz2,
>>>>>> copy it over to your Linux partition, then extract with $ tar
>>>>>> -jxvf
>>>>>> intel-536-537EP_2012_05_19.tar.bz2
>>>>>> $ cd intel-536-537
>>>>>> $ sudo make intel-536-537
>>>>>> $ sudo make install
>>>>>>
>>>>>> $ sudo wvdialconf /etc/wvdial.conf
>>>>>>
>>>>>> to see if scanmodem finds the modem.
>>>>>>
>>>>>> Let us know how this goes.
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>>
>>>>>> Antonio
>>>>>>
>>>>>> On Sun, Jun 17, 2012 at 7:42 PM, Andrew Merczynski-Hait
>>>>>> <andrewmh20@xxxxxxxxxx> wrote:
>>>>>>> SCANMODEM RECOGNIZES THE MODEM, BUT NOTHING ELSE SEEMS TO. I HAVE
>>>>>>> TRIED A BUNCH OF MOSTLY RANDOM STUFF, AND HAVE ALREADY TRIED
>>>>>>> USING THE .DEB PACKAGED 537EP DRIVERS FROM
>>>>>>>
>>>>> https://sites.google.com/site/ubuntumodems/modem-driver-downloads-for-537ep.
>>>>>>> THIS IS MY MODEM DATA.TXT FILE:
>>>>>>>
>>>>>>> Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx
>>>>>>> List Server,  as HTML can contain viruses. Use as the email Subject Line:
>>>>>>>            YourName, YourCountry  kernel 3.0.0-12-generic  With
>>>>>>> this Subject Line cogent experts will be alerted, and useful case
>>>>>>> names left in the Archive.
>>>>>>>   YourCountry will enable Country specific guidance. Linux
>>>>>>> experts in YourCountry  can be found through:
>>>>> http://www.linux.org/groups/index.html.
>>>>>>> They will know your Country's modem code, which may be essential
>>>>>>> for dialup service.
>>>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
>>>>>>> Internet Provider m`ail filters.
>>>>>>>   So in a day, also check the Archived responses at
>>>>>>> http://www.linmodems.org
>>>>>>> --------------------------  System information
>>>>>>> ---------------------------- CPU=i686,  Ubuntu ,
>>>>>>> ALSA_version=1.0.24 Linux version 3.0.0-12-generic
>>>>>>> (buildd@vernadsky) (gcc version 4.6.1 (Ubuntu/Linaro
>>>>>>> 4.6.1-9ubuntu3)
>>>>>>> ) #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011  scanModem update of:
>>>>>>> 2011_08_08
>>>>>>>
>>>>>>> Distrib_ID=Ubuntu
>>>>>>> DistribCodeName=oneiric
>>>>>>> AptRepositoryStem=http://us.archive.ubuntu.com/ubuntu/
>>>>>>>
>>>>>>>
>>>>>>> Presently install your Linux Distributions dkms package. It
>>>>>>> provides for automated driver updates, following upgrade of your
>>>>>>> kernel.  For details see
>>>>>>> http://linux.dell.com/projects.shtml#dkms
>>>>>>>
>>>>>>>   There are no blacklisted modem drivers in /etc/modprobe*  files
>>>>>>>
>>>>>>>   Potentially useful modem drivers now loaded are:
>>>>>>>
>>>>>>>
>>>>>>> Attached USB devices are:
>>>>>>>   ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp.
>>>>>>> JM20329 SATA Bridge  ID 062a:0000 Creative Labs Optical mouse If
>>>>>>> a cellphone is not detected, see
>>>>>>> http://ubuntuforums.org/archive/index.php/t-878554.html
>>>>>>> A sample report is:
>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.h
>>>>>>> tm
>>>>>>> l
>>>>>>>
>>>>>>> If a USB modem or cellphone is attached and was not detected,
>>>>>>> please provide available information in your request to
>>>>>>> discuss@xxxxxxxxxxxxx
>>>>>>>
>>>>>>> Candidate PCI devices with modem chips are:
>>>>>>> 01:01.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax
>>>>>>> Modem PCI (rev
>>>>>>> 04) High Definition Audio cards can host modem chips.
>>>>>>>
>>>>>>> For candidate card in slot 01:01.0, firmware information and
>>>>>>> bootup diagnostics are:
>>>>>>>   PCI slot       PCI ID          SubsystemID     Name
>>>>>>>   ----------     ---------       ---------       --------------
>>>>>>>   01:01.0        8086:1080       1028:1000       Modem: Intel
>>>>>>> Corporation FA82537EP 56K V.92 Data/Fax Modem PCI
>>>>>>>
>>>>>>>   Modem interrupt assignment and sharing:
>>>>>>>   --- Bootup diagnostics for card in PCI slot 01:01.0 ---- [
>>>>>>> 0.165277] pci 0000:01:01.0: [8086:1080] type 0 class 0x000703 [
>>>>>>> 0.165296] pci
>>>>>>> 0000:01:01.0: reg 10: [mem 0xfeafe000-0xfeafefff] [ 0.165306] pci
>>>>>>> 0000:01:01.0: reg 14: [io  0xde00-0xdeff] [    0.165366] pci
>>>>>>> 0000:01:01.0: PME# supported from D0 D3hot D3cold [    0.165371]
>>>>>>> pci
>>>>>>> 0000:01:01.0: PME# disabled [    0.640344] serial 0000:01:01.0:
>>>>>>> PCI INT A -> GSI 22 (level, low) -> IRQ
>>>>>>> 22
>>>>>>> [    0.640536] 0000:01:01.0: ttyS5 at I/O 0xde08 (irq = 22) is a
>>>>>>> 16450 [    0.640645] 0000:01:01.0: ttyS6 at I/O 0xde10 (irq = 22)
>>>>>>> is a 8250 [    0.640751] 0000:01:01.0: ttyS7 at I/O 0xde18 (irq =
>>>>>>> 22) is a 16450 [    0.640860] 0000:01:01.0: ttyS8 at I/O 0xde20
>>>>>>> (irq = 22) is a 8250 [    0.640969] 0000:01:01.0: ttyS9 at I/O
>>>>>>> 0xde28 (irq = 22) is a 8250 [    0.641611] 0000:01:01.0: ttyS16 at
>>>>>>> I/O 0xde60 (irq =
>>>>>>> 22) is a 8250
>>>>>>>
>>>>>>>   The PCI slot 01:01.0 of the modem card may be disabled early in
>>>>>>> a bootup process,  but then enabled later. If modem drivers load
>>>>>>> but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>>>>>>>   Send dmesg.txt along with ModemData.txt to
>>>>>>> discuss@xxxxxxxxxxxxx if help is needed.
>>>>>>>
>>>>>>>
>>>>>>> === Finished firmware and bootup diagnostics, next deducing
>>>>>>> cogent
>>>>>> software.
>>>>>>> ===
>>>>>>>
>>>>>>> Predictive  diagnostics for card in bus 01:01.0:
>>>>>>>         Modem chipset  detected on
>>>>>>> NAME="Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI "
>>>>>>> CLASS=0703
>>>>>>> PCIDEV=8086:1080
>>>>>>> SUBSYS=1028:1000
>>>>>>> IRQ=22
>>>>>>> IDENT=INTEL537EP
>>>>>>>
>>>>>>>   For candidate modem in:  01:01.0
>>>>>>>    0703 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax
>>>>>>> Modem PCI
>>>>>>>       Primary device ID:  8086:1080
>>>>>>>   Support type needed or chipset:        INTEL537EP
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>   Since 2006, Intel appears to have ceased its modem code updates
>>>>>>> for
>>>>>> Linux.
>>>>>>>   The outdated official Intel support packages can be accessed through:
>>>>>>>        http://developer.intel.com/design/modems/support/drivers.htm
>>>>>>>   Beneficially, Philippe Vouters has been provided updates as the
>>>>>>> Linux kernel evolves.
>>>>>>>   But intensive personal support is not feasible, see:
>>>>>>> http://archives.linmodems.org/24939
>>>>>>>   The code for the INTEL537 and INTEL536 chipset modems is now at:
>>>>>>>       http://vouters.dyndns.org/Intel/ , previously
>>>>>>> http://x9000.fr Copies are also stored at:
>>>>>>>
>>>>>>> http://linmodems.technion.ac.il/packages/intel/Philippe.Vouters/
>>>>>>> For Ubuntu Linux users with Intel 536 and 537 chipsets, there are
>>>>>>> driver installation packages available thru
>>>>>>> http://groups.google.com/group/ubuntu-modems
>>>>>>>
>>>>>>>   Read DOCs/Intel.txt and Modem/DOCs/YourSystem.txt for follow
>>>>>>> through guidance.
>>>>>>>
>>>>>>>
>>>>>>> Writing DOCs/Intel.txt
>>>>>>>
>>>>>>>   Completed candidate modem analyses.
>>>>>>>
>>>>>>>   The base of the UDEV device file system is: /dev/.udev
>>>>>>>
>>>>>>>   Versions adequately match for the compiler installed: 4.6.1
>>>>>>>              and the compiler used in kernel assembly: 4.6.1
>>>>>>>
>>>>>>>   linux-headers-3.0.0-12-generic resources needed for compiling
>>>>>>> are not manifestly ready!
>>>>>>>   The patch utility is needed for compiling ALSA drivers, and
>>>>>>> possibly others.
>>>>>>>
>>>>>>>   If compiling is necessary packages must be installed, providing:
>>>>>>>          linux-headers-3.0.0-12-generic
>>>>>>>
>>>>>>>
>>>>>>> If a driver compilation fails, with message including some lack
>>>>>>> of some FileName.h (stdio.h for example), then Some additional
>>>>>>> kernel-header files need installation to /usr/include. The
>>>>>>> minimal additional packages are libc6-dev and any of its
>>>>>>> dependents, under Ubuntu linux-libc-dev
>>>>>>>
>>>>>>> If an alternate ethernet connection is available, $  apt-get
>>>>>>> update $ apt-get -s install linux-kernel-devel will install needed packages.
>>>>>>> For Debian/Ubuntu related distributions, run the following
>>>>>>> command to display the needed package list:
>>>>>>>
>>>>>>> Otherwise packages have to be found through
>>>>>>> http://packages.ubuntu.com Once downloaded and transferred into a
>>>>>>> Linux partition, they can be installed alltogether with:
>>>>>>> $ sudo dpkg -i *.deb
>>>>>>>
>>>>>>> Checking settings of:   /etc/ppp/options asyncmap 0 noauth crtscts
>>>>>>> lock hide-password modem lcp-echo-interval 30 lcp-echo-failure 4
>>>>>>> noipx
>>>>>>>
>>>>>>> In case of a message like:
>>>>>>>    Warning: Could not modify /etc/ppp/pap-secrets: Permission
>>>>>>> denied see
>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.ht
>>>>>>> ml
>>>>>>>
>>>>>>> For guidance on FAX usage, get from
>>>>>>> http://linmodems.technion.ac.il/packages/  get faxing.tar.gz It
>>>>>>> has samples for a modem using port /dev/ttySL0, which must be
>>>>>>> changed to match your modem's port.
>>>>>>>
>>>>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels:
>>>>>>> eth0 Which can interfere with Browser naviagation.
>>>>>>>
>>>>>>>   Don't worry about the following, it is for experts should
>>>>>>> trouble shooting be necessary.
>>>>>>> ==========================================================
>>>>>>>
>>>>>>>   Checking for modem support lines:
>>>>>>>   --------------------------------------
>>>>>>>      /device/modem symbolic link:
>>>>>>> slmodemd created symbolic link /dev/ttySL0:
>>>>>>>      Within /etc/udev/ files:
>>>>>>>
>>>>>>>      Within /etc/modprobe.conf files:
>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
>>>>>>> order to blacklist unwanted modem drivers
>>>>>>> /etc/modprobe.d/blacklist-modem.conf:#
>>>>>>> blacklist snd-atiixp-modem /etc/modprobe.d/blacklist-modem.conf:#
>>>>>>> blacklist snd-via82xx-modem
>>>>>>> /etc/modprobe.d/alsa-base.conf:options
>>>>>>> snd-atiixp-modem
>>>>>>> index=-2 /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem
>>>>>>> index=-2
>>>>>>>      Within any ancient /etc/devfs files:
>>>>>>>
>>>>>>>      Within ancient kernel 2.4.n /etc/module.conf files:
>>>>>>>
>>>>>>> --------- end modem support lines --------
>>>>>>>
>>>>>>>
>>>>>>> ~Andrew Merczynski-Hait
>>>>>>>
>>>>>>>
>
>



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux