Jeffrey, On Sat, Aug 27, 2011 at 9:43 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote: > Hi Antonio! > > Indeed, dgcmodem_1.13_i386.deb seemed to install fine without USB modem, and > I'll gladly go buy me one! (which one though/!?) > > I don't quite understand the first part - do you still think I should try > another hsfmodem package?? I'd love to wrestle with/get some response out of > that softmodem chip, but haven't we exhausted all options as the > HowToConexant 11.04 link didn't do the trick? Thanks much, > No, don't try another package, but at least post the error messages or the build.log that comes out so that Jonathan(Linuxant support) can make suggestions or let you know the status of the driver. I don't have a conexant modem, if not I would try a little harder to try and get it to work at least. Other users are also encountering the same issues as you have, and along with them a fix could be in the way. If you have a cell phone, you may use it for dialup too in the meantime :) Don't give up yet. Regards, Antonio > > Jeff > > > > > On 08/27/2011 07:21 PM, Antonio Olivares wrote: >> >> Jeffrey, >> >> You installed this on the VAIO with >> >> Codec: Conexant ID 2c06 >> Address: 1 >> MFG Function Id: 0x2 (unsol 1) >> Vendor Id: 0x14f12c06 >> Subsystem Id: 0x104d1700 >> Revision Id: 0x100000 >> Modem Function Group: 0x2 >> >> The audio card hosts a softmodem chip: 0x14f12c06 >> >> 14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset. >> Get a hsfmodem package through http://www.linuxant.com >> >> If not a Conexant modem, the driver hsfmodem-drivers with its dependent >> drivers: >> >> and how about the one with the usb modem: >> >> have you tried install dgcmodem_1.13_i386.deb? >> >> Regards, >> >> Antonio >> >> On Sat, Aug 27, 2011 at 9:00 PM, Jeffrey Cohan<cohanjeffrey@xxxxxxx> >> wrote: >>> >>> Hi Marv, >>> >>> 1) >>> installing hsfmodem_7.80.02.06full_i386.deb with dpkg, I get >>> "ERROR: Module build failed! >>> Please examine the log file >>> "/etc/hsfmodem/log/buildlog-20110827173945.txt" >>> to determine why." >>> >>> 2) >>> I clicked on the .deb file and reinstalled it through synaptic package >>> manager, and it gave me no eror message, but hsfconfig gave me the error >>> as >>> above. (Module build failed) >>> >>> 3) >>> so I went to the Ubuntu Conexant link. They start by confirming that his >>> HSF >>> modem (USB in this case) is recognized b the system. But how can I do >>> that???? >>> >>> ...and after making the substitutions they recommend and running >>> hsfconfig I >>> got the familiar: >>> "Warning: no device detected by hsf driver - HDA modems may require >>> reboot >>> Note: HDA support not compiled in the driver" >>> >>> Can I help it find my device somehow, as ScanModem finds it? Is it >>> certain >>> that this last process can be effective? or might it work only for USB >>> modems? What kind? >>> >>> Many thanks, >>> >>> Jeff >>> >>> >>> -----Original Message----- >>> From: Jeffrey Cohan<cohanjeffrey@xxxxxxx> >>> To: marvin.stodolsky@xxxxxxxxx >>> Cc: discuss@xxxxxxxxxxxxx; olivares14031@xxxxxxxxx >>> Sent: Sat, Aug 27, 2011 3:29 pm >>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>> >>> Hi Marv, >>> >>> I actually never had a >>> /usr/lib/hcfpcimodem/ >>> folder on my system. I misled you by giving in my email the list of >>> substitutions that Jonathan gave, instead of the ones I ACTUALLY did for >>> which I substituted /hsfmodem/ (the same files existed in this folder). >>> Sorry. But perhaps it is a good idea to clean up - I'll do so and >>> reinstall! >>> Should I follow the substitution advice from the 11.04 link on the >>> DialupModemHowtoConexant page as before? If I don't hear from you I'll >>> try >>> installing it before and then after these fixes. >>> Thanks, >>> Jeff >>> >>> (and I could reinstall Ubuntu if you think I might have corrupted >>> something) >>> >>> >>> -----Original Message----- >>> From: Marvin Stodolsky<marvin.stodolsky@xxxxxxxxx> >>> To: Jeffrey Cohan<cohanjeffrey@xxxxxxx> >>> Cc: discuss@xxxxxxxxxxxxx; olivares14031@xxxxxxxxx >>> Sent: Sat, Aug 27, 2011 2:56 pm >>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>> >>> Jeff >>> >>> Installing the hsfmodem on my System, there was not created a folder >>> /usr/lib/hcfpcimodem/ >>> So some odd remnants seem to be on your System >>> >>> I suggest doing uninstalls on all your modem packages , just to clean up >>> To get the Names for the uninstalls, do >>> $ sudo apt-cache search hsf >>> which will display the installaled package Name >>> Then >>> $ sudo apt-get remove Name >>> will uninstall it. >>> >>> Repeat with: >>> $ sudo apt-cache search hcf >>> etc. >>> >>> Then please again try the install of the hsfmodem package >>> >>> MarvS >>> >>> On Sat, Aug 27, 2011 at 5:31 PM, Jeffrey Cohan<cohanjeffrey@xxxxxxx> >>> wrote: >>>> >>>> Hi Marv, >>>> >>>> Actually the HP is the 64-bit machine withthe 11c11040 chip. On the VAIO >>>> I >>>> did use >>>> hsfmodem-7.80.02.06full.tar.gz >>>> which I'm guessing is correct for the 32-bit Vaio, and I followed >>>> exactly >>>> the instructions on the "for Ubuntu 11.04" link on the >>>> DialupModemHowtoConexant page, making substitutions called for, and got >>>> "Warning: no device detected by hsf driver - HDA modems may require >>>> reboot" >>>> and "Note: HDA support not compiled in the driver" >>>> - exactly as when I had previously followed Jonathan's slightly >>>> different >>>> substitutions. Ah, you were confused as I did in fact make these changes >>>> in >>>> the hsfmodem folder and not an hcfmodem folder, which I did not have. >>>> >>>> But perhaps I did successfully install the USB modem package? (see last >>>> email) Hope so... >>>> >>>> Jeff >>>> >>>> >>>> -----Original Message----- >>>> From: Marvin Stodolsky<marvin.stodolsky@xxxxxxxxx> >>>> To: Jeffrey Cohan<cohanjeffrey@xxxxxxx>; Linmodems >>>> <discuss@xxxxxxxxxxxxx> >>>> Sent: Sat, Aug 27, 2011 1:58 pm >>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>>> >>>> Jeff >>>> >>>> Let's summarize and clarify some issues. >>>> With respect to the VIAO PC x86_64 , with the 11c11040 modem chip >>>> there is no support. If you want to install the 32 bit Ubuntu variant on >>>> this PC >>>> there may be support. We haven't had a clean test since Antonio did a >>>> code update, >>>> but compilng is OK on Ubuntu Natty 32 bit >>>> >>>> With respect to the HP PC with the the Conexant chip modem, >>>> the code package which you should be using is >>>> hsfmodem-7.80.02.06x86_64full.tar.gz, >>>> obtained from the bottom of >>>> http://www.linuxant.com/drivers/hsf/full/downloads.php >>>> >>>> Is this the package on which you are having the compile problems? >>>> >>>> I am confused about your description of the attempted fixes, >>>> because they were done on files like >>>>> >>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c >>>> >>>> but that is hcfpcimodem code, while cogent changes if any should be on >>>> a hsfmodem code >>>> >>>> MarvS >>>> >>>> >>>> On Sat, Aug 27, 2011 at 4:43 PM, Jeffrey Cohan<cohanjeffrey@xxxxxxx> >>>> wrote: >>>>> >>>>> Hi Antonio! >>>>> >>>>> in response I get >>>>> GNU grep 2.6.3 >>>>> License GPLv3+: GNU GPL version 3 or later >>>>> >>>>> ...so all is ok? I'm trying to install dgcmodem_1.13_i386.deb which I >>>>> have >>>>> unzipped but can't yet get dpkg to work (I get "dpkg: error: need an >>>>> action >>>>> option") and will let you know how it goes. Again, I'd be happy to >>>>> re-install Ubuntu if necessary. >>>>> >>>>> Jeff >>>>> >>>>> >>>>> -----Original Message----- >>>>> From: Antonio Olivares<olivares14031@xxxxxxxxx> >>>>> To: Jeffrey Cohan<cohanjeffrey@xxxxxxx> >>>>> Cc: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx; >>>>> support@xxxxxxxxxxxx >>>>> Sent: Sat, Aug 27, 2011 1:20 pm >>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>>>> >>>>> Jeffrey, >>>>> >>>>> I made a BOO-BOO(mistake), instead of uname -a , dmesg | grep 'gcc' >>>>> hen gcc --version like >>>>> >>>>> [olivares@acer-aspire-1 ~]$ dmesg | grep 'gcc' >>>>> [ 0.000000] Linux version 2.6.40-4.fc15.i686 >>>>> (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.0 20110530 >>>>> (Red Hat 4.6.0-9) (GCC) ) #1 SMP Fri Jul 29 18:54:39 UTC 2011 >>>>> [olivares@acer-aspire-1 ~]$ gcc --version >>>>> gcc (GCC) 4.6.0 20110603 (Red Hat 4.6.0-10) >>>>> Copyright (C) 2011 Free Software Foundation, Inc. >>>>> This is free software; see the source for copying conditions. There is >>>>> NO >>>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR >>>>> PURPOSE. >>>>> >>>>> [olivares@acer-aspire-1 ~]$ >>>>> >>>>> Notice that the gcc versions do match :) >>>>> >>>>> You may pursue to try Marv's suggestion linuxant's usb drivers and see >>>>> if they work. >>>>> >>>>> Regards, >>>>> >>>>> Antonio >>>>> >>>>> On Sat, Aug 27, 2011 at 1:47 PM, Jeffrey Cohan<cohanjeffrey@xxxxxxx> >>>>> wrote: >>>>>> >>>>>> Antonio, here's what I get - do these correspond? >>>>>> >>>>>> uname -a >>>>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri >>>>>> Jul >>>>>> 29 >>>>>> 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux >>>>>> >>>>>> gcc --version >>>>>> gcc (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 >>>>>> Copyright (C) 2010 Free Software Foundation, Inc. >>>>>> >>>>>> I'll gladly reinstall anything! and will look at your other options as >>>>>> well. >>>>>> Thanks, >>>>>> >>>>>> Jeffrey >>>>>> - - - - - - >>>>>> >>>>>> Jeffrey, >>>>>> >>>>>> On Sat, Aug 27, 2011 at 11:42 AM, Jeffrey Cohan<cohanjeffrey@xxxxxxx> >>>>>> wrote: >>>>>> >>>>>>> Good morning Antonio! I found something from you about the USRobotics >>>>>>> USR5637 USB modem, and I'm assuming that DIDN'T work out on Ubuntu >>>>>>> 11.04? >>>>>>> I >>>>>>> don't find anything on the web that confirms that any other USB modem >>>>>>> does >>>>>>> work. Or a replacement internal one for the VAIO? >>>>>>> >>>>>>> I'm reluctant to install an older Ubuntu version as you suggest Marv >>>>>>> as >>>>>>> sooner or later it would not be supported, because it would take so >>>>>>> much >>>>>>> time to go back and forth unless one version can be accessed within >>>>>>> another >>>>>>> (at home I have only dial-up and use it many times each day) and >>>>>>> because >>>>>>> of >>>>>>> a potential problem with Thunderbird: due to family needs I go >>>>>>> between >>>>>>> the >>>>>>> 2 >>>>>>> laptops (I can check email via wifi when not at home), must keep my >>>>>>> Thunderbird profile on an external drive, and the profile has been >>>>>>> severely >>>>>>> compromised when accessed through different systems/versions (I'd >>>>>>> like >>>>>>> to >>>>>>> have the latest Ubuntu on both machines, and do need to use both to >>>>>>> run >>>>>>> ALL >>>>>>> of my software). If it were for the occasional fax, this option would >>>>>>> be >>>>>>> fine. >>>>>>> >>>>>> Maybe you can install an older kernel, for the meantime to give some >>>>>> time for a fix. >>>>>> >>>>>>> So I'll assume that the message: >>>>>>> no device detected by hsf driver - HDA modems may require reboot >>>>>>> Note: HDA support not compiled in the driver >>>>>>> >>>>>>> ...leads me too a dead end. On both computers, alas. >>>>>>> >>>>>>> On this page: >>>>>>> https://help.ubuntu.com/community/DialupModemHowto/Conexant >>>>>>> shouldn't this link: >>>>>>> For Ubuntu 11.04 (Natty Narwhal): You can follow the steps on this >>>>>>> thread. >>>>>>> : >>>>>>> http://ubuntuforums.org/showthread.php?t=1781268 >>>>>>> be removed? or why would it not work in my case? >>>>>>> >>>>>> Might be due to some kernel problem* , kernel devel package/kernel >>>>>> headers, some type of mismatch when I see the errors in the messages >>>>>> that you have sent us: >>>>>> >>>>>> <quote> >>>>>> alsa-driver-linuxant_1.0.23.1_all.deb: >>>>>> ----in terminal: >>>>>> Building modules for the 2.6.38-11-generic kernel, please wait... >>>>>> done. >>>>>> ERROR: Build failed. Please review the build log at >>>>>> /tmp/alsa-driver-linuxant.26528.log >>>>>> dpkg: error processing alsa-driver-linuxant (--install): >>>>>> subprocess installed post-installation script returned error exit >>>>>> status >>>>>> 2 >>>>>> ----in log file: >>>>>> checking for GCC version... Kernel compiler: Used compiler: gcc >>>>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 >>>>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED >>>>>> *** Assuming the same compiler is used with the current system >>>>>> compiler. >>>>>> *** Please make sure that the same compiler version was used for >>>>>> building kernel. >>>>>> and later... >>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function >>>>>> ‘snd_pcm_hw_params’: >>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: >>>>>> implicit declaration of function ‘pm_qos_remove_requirement’ >>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error: >>>>>> implicit declaration of function ‘pm_qos_add_requirement’ >>>>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error >>>>>> 1 >>>>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2 >>>>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2 >>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' >>>>>> make: *** [compile] Error 2 >>>>>> </quote> >>>>>> >>>>>> This line ``*** NO PREDEFINED KERNEL COMPILER IS DETECTED >>>>>> *** Assuming the same compiler is used with the current system >>>>>> compiler. >>>>>> *** Please make sure that the same compiler version was used for >>>>>> building kernel. >>>>>> '' is the one that makes me believe that the running kernel is not the >>>>>> same gcc as the one in the system. In this case and in others it is >>>>>> important that the running kernel and the gcc be the same so that no >>>>>> errors occurs. If you can you can confirm >>>>>> >>>>>> run >>>>>> $ uname -a >>>>>> and >>>>>> $ gcc --version >>>>>> >>>>>> and that may tell us why things are not working. To get it working, >>>>>> the kernel and the gcc must be the same. >>>>>> >>>>>> If you want and have access to a livecd like >>>>>> Knoppix/Slax/Porteus/Puppy/..., you can use some of these at least to >>>>>> get a connection to internet via dialup. Puppy in many cases has out >>>>>> of box support for many winmodems. In porteus I have successfully >>>>>> built some buildscripts to build a module that will make the modems >>>>>> work. Some modems except the hsf/hcf modems since these are >>>>>> proprietary, except for the 14 kbps one but that one many people would >>>>>> get mad in the case that it is built(they would want full speed, and >>>>>> it is a difficult to accomodate to many people*). One person built >>>>>> such a module for slax, but I have no status for it as Slax has not >>>>>> been updated for a while. Without screwing up your running system >>>>>> and/or installing again you may try out one livecd(if you can get one) >>>>>> and try the driver and see if you can make the modem work and connect >>>>>> via dialup or install a kernel that matches gcc and try the fixes >>>>>> again. >>>>>> >>>>>> * unless you have a Dell machine, then you can use the oem drivers and >>>>>> you can get full speed on the modem. >>>>>> >>>>>> If you have a cell phone, you may also use it as a modem to connect to >>>>>> internet. In ModemData.txt, there is a report you can see : >>>>>> >>>>>> If a cellphone is not detected, see >>>>>> http://ubuntuforums.org/archive/index.php/t-878554.html >>>>>> A sample report is: >>>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html >>>>>> >>>>>> Don't get discouraged, a little bit of patience can go a long way. I >>>>>> almost forgot, you can also virtualize a version of linux and with an >>>>>> older kernel you can run an older installation along with your current >>>>>> one and have a working dialup connection on that one with a working >>>>>> driver. These are things you can take a look at. >>>>>> >>>>>> When there were no fixes for smartlink modem after kernel 2.6.30/31, I >>>>>> used Slax livecd with older kernel to access the internet and then >>>>>> later the fixes came along thanks to a person that figured things out. >>>>>> You may try to do something similar and not be left without internet >>>>>> for a fix to come in the meantime. Hang in there! You can do it. >>>>>> >>>>>> Regards, >>>>>> >>>>>> >>>>>> >>>>>> Antonio >>>>>> >>>>>>> I've much appreciated your advice - thanks! >>>>>>> >>>>>>> Jeff >>>>>>> >>>>>>> >>>>>>> >>>>>>> -----Original Message----- >>>>>>> From: cohanjeffrey@xxxxxxx >>>>>>> To: olivares14031@xxxxxxxxx; marvin.stodolsky@xxxxxxxxx; >>>>>>> discuss@xxxxxxxxxxxxx; support@xxxxxxxxxxxx >>>>>>> Sent: Fri, Aug 26, 2011 7:23 pm >>>>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>>>>>> >>>>>>> Thank you Antonio and Marv - really appreciate it! >>>>>>> >>>>>>> After another full day I'll try to take your advice tomorrow Marv, >>>>>>> and >>>>>>> it >>>>>>> seems from Ganton at >>>>>>> http://ubuntuforums.org/showthread.php?t=1597605&page=4 >>>>>>> that the most recent kernel that will work will be Ubuntu 10.10. Or >>>>>>> could >>>>>>> I >>>>>>> buy an external modem on ebay that is said to work on Linux? If you >>>>>>> have >>>>>>> further ideas after reading what follows (especially, re "Warning: no >>>>>>> device >>>>>>> detected by hsf driver - HDA modems may require reboot" and "Note: >>>>>>> HDA >>>>>>> support not compiled in the driver"), I would be most grateful! >>>>>>> >>>>>>> Today I removed alsa-driver-linuxant and installed >>>>>>> hsfmodem-7.80.02.06full, >>>>>>> and got code similar to yours Antonio. >>>>>>> >>>>>>> But an "hsfconfig" resulted in (excerpts): >>>>>>> Conexant HSF softmodem driver, version 7.80.02.06full >>>>>>> When reporting a problem for the first time, please send >>>>>>> us the file generated by "hsfconfig --dumpdiag". >>>>>>> No pre-built modules for: Ubuntu-11.04 linux-2.6.38-11-generic >>>>>>> i686-SMP >>>>>>> ...and the punchline: >>>>>>> ERROR: Module build failed! >>>>>>> - - - >>>>>>> buildlog excerpts: >>>>>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared >>>>>>> here >>>>>>> (not >>>>>>> in a function) >>>>>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1 >>>>>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2 >>>>>>> >>>>>>> so I again did this: >>>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >>>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c >>>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >>>>>>> replace .ioctl with .compat_ioctl in: >>>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c >>>>>>> >>>>>>> and "hsfconfig" got... >>>>>>> Warning: no device detected by hsf driver - HDA modems may require >>>>>>> reboot >>>>>>> Note: HDA support not compiled in the driver >>>>>>> >>>>>>> then I ran everything (whew!) from "Ganton's Avatar" at >>>>>>> http://ubuntuforums.org/showthread.php?t=1781268 >>>>>>> and again got exactly the same message with "hsfconfig" >>>>>>> (issue not [SOLVED] as stated) >>>>>>> >>>>>>> with another hsfconfig, it asked >>>>>>> Warning: existing driver modules found under: >>>>>>> /lib/modules/2.6.38-11-generic/ >>>>>>> Would you like to keep using them? [no] >>>>>>> ...and I pressed [enter] >>>>>>> but got similar results >>>>>>> - - - (end of exploits for the day, besides a little blackberry >>>>>>> picking)- >>>>>>> - - - - - >>>>>>> >>>>>>> Thanks again for helping, >>>>>>> >>>>>>> Jeff >>>>>>> >>>>>>> >>>>>>> >>>>>>> -----Original Message----- >>>>>>> From: Antonio Olivares<olivares14031@xxxxxxxxx> >>>>>>> To: cohanjeffrey@xxxxxxx >>>>>>> Cc: discuss@xxxxxxxxxxxxx; Linuxant support (Jonathan) >>>>>>> <support@xxxxxxxxxxxx>; Marvin Stodolsky<marvin.stodolsky@xxxxxxxxx> >>>>>>> Sent: Thu, Aug 25, 2011 6:56 pm >>>>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Jeffrey, >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Something is strange. I try the package (hsf) and it runs for me, I >>>>>>> >>>>>>> >>>>>>> >>>>>>> can't find errors: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ su -c 'make >>>>>>> install' >>>>>>> >>>>>>> >>>>>>> >>>>>>> Password: >>>>>>> >>>>>>> >>>>>>> >>>>>>> make[1]: Entering directory >>>>>>> >>>>>>> >>>>>>> >>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm' >>>>>>> >>>>>>> >>>>>>> >>>>>>> mkdir -m 755 -p cvt >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'< >>>>>>> >>>>>>> >>>>>>> >>>>>>> inf/hsfpcibasic2.inf | ./cvtinf.pl cvt/hsfpcibasic2; if [ -n >>>>>>> >>>>>>> >>>>>>> >>>>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2< "inf/hsf.cty"; >>>>>>> >>>>>>> >>>>>>> >>>>>>> else true; fi >>>>>>> >>>>>>> >>>>>>> >>>>>>> (cd cvt/hsfpcibasic2/Region&& grep -v -l '*' *NAME | sed -e 's/^0//' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's/^0//' -e 's/_NAME$//' | tr ' >>>>>>> ' ',' | sed -e 's/,$//' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's/^/"/' -e 's/$/"/' ; echo "")> cvt/hsfpcibasic2/COUNTRY_CODE_LIST >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'< >>>>>>> >>>>>>> >>>>>>> >>>>>>> inf/hsfpcibasic2smart.inf | ./cvtinf.pl cvt/hsfpcibasic2smart; if [ >>>>>>> -n >>>>>>> >>>>>>> >>>>>>> >>>>>>> "" ]; then ./cvtinf.pl cvt/hsfpcibasic2smart< ""; else true; fi >>>>>>> >>>>>>> >>>>>>> >>>>>>> if [ -d cvt/hsfpcibasic2/Profile ]; then ln -sf >>>>>>> >>>>>>> >>>>>>> >>>>>>> ../hsfpcibasic2/Profile cvt/hsfpcibasic2smart/.; else true; fi >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2smart/. >>>>>>> >>>>>>> >>>>>>> >>>>>>> (cd cvt/hsfpcibasic2smart/Region&& grep -v -l '*' *NAME | sed -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr' >>>>>>> ' ',' | sed -e 's/,$//' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's/^/"/' -e 's/$/"/' ; echo "")> >>>>>>> >>>>>>> >>>>>>> >>>>>>> cvt/hsfpcibasic2smart/COUNTRY_CODE_LIST >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'< >>>>>>> >>>>>>> >>>>>>> >>>>>>> inf/hsfpcibasic2hsfi.inf | ./cvtinf.pl cvt/hsfpcibasic2hsfi; if [ -n >>>>>>> >>>>>>> >>>>>>> >>>>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2hsfi< >>>>>>> >>>>>>> >>>>>>> >>>>>>> "inf/hsf.cty"; else true; fi >>>>>>> >>>>>>> >>>>>>> >>>>>>> rm -rf cvt/hsfpcibasic2hsfi/Region >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2hsfi/. >>>>>>> >>>>>>> >>>>>>> >>>>>>> (cd cvt/hsfpcibasic2hsfi/Region&& grep -v -l '*' *NAME | sed -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr' >>>>>>> ' ',' | sed -e 's/,$//' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's/^/"/' -e 's/$/"/' ; echo "")> >>>>>>> >>>>>>> >>>>>>> >>>>>>> cvt/hsfpcibasic2hsfi/COUNTRY_CODE_LIST >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'< >>>>>>> >>>>>>> >>>>>>> >>>>>>> inf/hsfpcibasic2bry.inf | ./cvtinf.pl cvt/hsfpcibasic2bry; if [ -n >>>>>>> >>>>>>> >>>>>>> >>>>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2bry< >>>>>>> "inf/hsf.cty"; >>>>>>> >>>>>>> >>>>>>> >>>>>>> else true; fi >>>>>>> >>>>>>> >>>>>>> >>>>>>> rm -rf cvt/hsfpcibasic2bry/Region >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2bry/. >>>>>>> >>>>>>> >>>>>>> >>>>>>> (cd cvt/hsfpcibasic2bry/Region&& grep -v -l '*' *NAME | sed -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr' >>>>>>> ' ',' | sed -e 's/,$//' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's/^/"/' -e 's/$/"/' ; echo "")> >>>>>>> >>>>>>> >>>>>>> >>>>>>> cvt/hsfpcibasic2bry/COUNTRY_CODE_LIST >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'< >>>>>>> >>>>>>> >>>>>>> >>>>>>> inf/hsfpcibasic3.inf | ./cvtinf.pl cvt/hsfpcibasic3; if [ -n >>>>>>> >>>>>>> >>>>>>> >>>>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic3< "inf/hsf.cty"; >>>>>>> >>>>>>> >>>>>>> >>>>>>> else true; fi >>>>>>> >>>>>>> >>>>>>> >>>>>>> rm -rf cvt/hsfpcibasic3/Region >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic3/. >>>>>>> >>>>>>> >>>>>>> >>>>>>> (cd cvt/hsfpcibasic3/Region&& grep -v -l '*' *NAME | sed -e 's/^0//' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's/^0//' -e 's/_NAME$//' | tr ' >>>>>>> ' ',' | sed -e 's/,$//' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's/^/"/' -e 's/$/"/' ; echo "")> cvt/hsfpcibasic3/COUNTRY_CODE_LIST >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'< >>>>>>> >>>>>>> >>>>>>> >>>>>>> inf/hsfmc97ich.inf | ./cvtinf.pl cvt/hsfmc97; if [ -n "" ]; then >>>>>>> >>>>>>> >>>>>>> >>>>>>> ./cvtinf.pl cvt/hsfmc97< ""; else true; fi >>>>>>> >>>>>>> >>>>>>> >>>>>>> rm -f mc97/HW_ADAPTER_TYPE >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfmc97/. >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfmc97/. >>>>>>> >>>>>>> >>>>>>> >>>>>>> (cd cvt/hsfmc97/Region&& grep -v -l '*' *NAME | sed -e 's/^0//' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's/^0//' -e 's/_NAME$//' | tr' >>>>>>> ' ',' | sed -e 's/,$//' -e 's/^/"/' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's/$/"/' ; echo "")> cvt/hsfmc97/COUNTRY_CODE_LIST >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ali >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ati >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ich >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97sis >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97via >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'< >>>>>>> >>>>>>> >>>>>>> >>>>>>> inf/hsfcadmus2.inf | ./cvtinf.pl cvt/hsfcadmus2; if [ -n "" ]; then >>>>>>> >>>>>>> >>>>>>> >>>>>>> ./cvtinf.pl cvt/hsfcadmus2< ""; else true; fi >>>>>>> >>>>>>> >>>>>>> >>>>>>> rm -f cadmus2/HW_ADAPTER_TYPE >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf ../hsfpcibasic2/Profile cvt/hsfcadmus2/. >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfcadmus2/. >>>>>>> >>>>>>> >>>>>>> >>>>>>> (cd cvt/hsfcadmus2/Region&& grep -v -l '*' *NAME | sed -e 's/^0//' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's/^0//' -e 's/_NAME$//' | tr ' >>>>>>> ' ',' | sed -e 's/,$//' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's/^/"/' -e 's/$/"/' ; echo "")> cvt/hsfcadmus2/COUNTRY_CODE_LIST >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'< >>>>>>> >>>>>>> >>>>>>> >>>>>>> inf/hsfcadmus2smart.inf | ./cvtinf.pl cvt/hsfcadmus2smart; if [ -n "" >>>>>>> >>>>>>> >>>>>>> >>>>>>> ]; then ./cvtinf.pl cvt/hsfcadmus2smart< ""; else true; fi >>>>>>> >>>>>>> >>>>>>> >>>>>>> rm -f cadmus2smart/HW_ADAPTER_TYPE >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfcadmus2smart/. >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfcadmus2smart/. >>>>>>> >>>>>>> >>>>>>> >>>>>>> (cd cvt/hsfcadmus2smart/Region&& grep -v -l '*' *NAME | sed -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr' >>>>>>> ' ',' | sed -e 's/,$//' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's/^/"/' -e 's/$/"/' ; echo "")> >>>>>>> >>>>>>> >>>>>>> >>>>>>> cvt/hsfcadmus2smart/COUNTRY_CODE_LIST >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'< >>>>>>> >>>>>>> >>>>>>> >>>>>>> inf/hsfhda.inf | ./cvtinf.pl cvt/hsfhda; if [ -n "" ]; then >>>>>>> >>>>>>> >>>>>>> >>>>>>> ./cvtinf.pl cvt/hsfhda< ""; else true; fi >>>>>>> >>>>>>> >>>>>>> >>>>>>> rm -f hda/HW_ADAPTER_TYPE >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfhda/. >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfhda/. >>>>>>> >>>>>>> >>>>>>> >>>>>>> (cd cvt/hsfhda/Region&& grep -v -l '*' *NAME | sed -e 's/^0//' -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's/^0//' -e 's/_NAME$//' | tr' >>>>>>> ' ',' | sed -e 's/,$//' -e 's/^/"/' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's/$/"/' ; echo "")> cvt/hsfhda/COUNTRY_CODE_LIST >>>>>>> >>>>>>> >>>>>>> >>>>>>> cd cvt&& find . -type f ! -empty -exec md5sum {} ';' | sort | >>>>>>> >>>>>>> >>>>>>> >>>>>>> while read sum file ; do >>>>>>> >>>>>>> >>>>>>> >>>>>>> if [ "$sum" = "$prevsum" ]&& cmp -s "$file" "$prevfile"; then >>>>>>> >>>>>>> >>>>>>> >>>>>>> rm -f "$file"; >>>>>>> >>>>>>> >>>>>>> >>>>>>> if ! ln "$prevfile" "$file"; then >>>>>>> >>>>>>> >>>>>>> >>>>>>> echo 2>&1 "$0: ln FAILED - recreate $file based on >>>>>>> $prevfile"; >>>>>>> >>>>>>> >>>>>>> >>>>>>> exit 1; >>>>>>> >>>>>>> >>>>>>> >>>>>>> fi; >>>>>>> >>>>>>> >>>>>>> >>>>>>> else >>>>>>> >>>>>>> >>>>>>> >>>>>>> prevsum="$sum"; >>>>>>> >>>>>>> >>>>>>> >>>>>>> prevfile="$file"; >>>>>>> >>>>>>> >>>>>>> >>>>>>> fi; >>>>>>> >>>>>>> >>>>>>> >>>>>>> done >>>>>>> >>>>>>> >>>>>>> >>>>>>> touch cvt/.linksame >>>>>>> >>>>>>> >>>>>>> >>>>>>> mkdir -m 755 -p /etc/hsfmodem/nvm >>>>>>> >>>>>>> >>>>>>> >>>>>>> cd cvt&& (find hsfpcibasic2 hsfpcibasic2smart hsfpcibasic2hsfi >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfpcibasic2bry hsfpcibasic3 hsfmc97 hsfmc97ali hsfmc97ati >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfmc97ich hsfmc97sis hsfmc97via hsfcadmus2 hsfcadmus2smart >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfhda | cpio -pdmu /etc/hsfmodem/nvm) >>>>>>> >>>>>>> >>>>>>> >>>>>>> 127 blocks >>>>>>> >>>>>>> >>>>>>> >>>>>>> make[1]: Leaving directory >>>>>>> >>>>>>> >>>>>>> >>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm' >>>>>>> >>>>>>> >>>>>>> >>>>>>> make[1]: Entering directory >>>>>>> >>>>>>> >>>>>>> >>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts' >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDRIVER@!hsf!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTTARGET@!hsf!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTARCH@!i386!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERDEV@!HSF!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTMAXMDM@!8!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUX_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> < patcher.in> patcher >>>>>>> >>>>>>> >>>>>>> >>>>>>> chmod --reference=patcher.in patcher >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -s cnxtconfig.in hsfconfig.in >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDRIVER@!hsf!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTTARGET@!hsf!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTARCH@!i386!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERDEV@!HSF!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTMAXMDM@!8!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUX_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> < hsfconfig.in> hsfconfig >>>>>>> >>>>>>> >>>>>>> >>>>>>> chmod --reference=hsfconfig.in hsfconfig >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -s cnxtstop.in hsfstop.in >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDRIVER@!hsf!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTTARGET@!hsf!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTARCH@!i386!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERDEV@!HSF!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTMAXMDM@!8!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUX_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> < hsfstop.in> hsfstop >>>>>>> >>>>>>> >>>>>>> >>>>>>> chmod --reference=hsfstop.in hsfstop >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -s cnxtmodconflicts.in hsfmodconflicts.in >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDRIVER@!hsf!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTTARGET@!hsf!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTARCH@!i386!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERDEV@!HSF!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTMAXMDM@!8!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUX_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> < hsfmodconflicts.in> hsfmodconflicts >>>>>>> >>>>>>> >>>>>>> >>>>>>> chmod --reference=hsfmodconflicts.in hsfmodconflicts >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -s cnxtdcpd.in hsfdcpd.in >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDRIVER@!hsf!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTTARGET@!hsf!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTARCH@!i386!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERDEV@!HSF!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTMAXMDM@!8!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUX_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> < hsfdcpd.in> hsfdcpd >>>>>>> >>>>>>> >>>>>>> >>>>>>> chmod --reference=hsfdcpd.in hsfdcpd >>>>>>> >>>>>>> >>>>>>> >>>>>>> install -m 700 hsfconfig hsfstop hsfmodconflicts hsfdcpd /usr/sbin >>>>>>> >>>>>>> >>>>>>> >>>>>>> ln -s rccnxt.in rchsf.in >>>>>>> >>>>>>> >>>>>>> >>>>>>> sed >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDRIVER@!hsf!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTTARGET@!hsf!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTARCH@!i386!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERDEV@!HSF!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTMAXMDM@!8!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUX_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>>>>> >>>>>>> >>>>>>> >>>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>>>>> >>>>>>> >>>>>>> >>>>>>> < rchsf.in> rchsf >>>>>>> >>>>>>> >>>>>>> >>>>>>> chmod --reference=rchsf.in rchsf >>>>>>> >>>>>>> >>>>>>> >>>>>>> mkdir -m 755 -p /usr/lib/hsfmodem >>>>>>> >>>>>>> >>>>>>> >>>>>>> install -m 700 rchsf /usr/lib/hsfmodem >>>>>>> >>>>>>> >>>>>>> >>>>>>> make[1]: Leaving directory >>>>>>> >>>>>>> >>>>>>> >>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts' >>>>>>> >>>>>>> >>>>>>> >>>>>>> make[1]: Entering directory >>>>>>> >>>>>>> >>>>>>> >>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules' >>>>>>> >>>>>>> >>>>>>> >>>>>>> rm -rf "/usr/lib/hsfmodem/config.mak" >>>>>>> >>>>>>> >>>>>>> >>>>>>> "/usr/lib/hsfmodem/modules/imported" "/usr/lib/hsfmodem/modules" >>>>>>> >>>>>>> >>>>>>> >>>>>>> mkdir -m 755 -p /usr/lib/hsfmodem/modules >>>>>>> >>>>>>> >>>>>>> >>>>>>> (cd ..&& find config.mak modules/imported -depth -print | cpio -pdmu >>>>>>> >>>>>>> >>>>>>> >>>>>>> /usr/lib/hsfmodem) >>>>>>> >>>>>>> >>>>>>> >>>>>>> 5892 blocks >>>>>>> >>>>>>> >>>>>>> >>>>>>> find . ( -name COPYING -o -name '*.sh' -o -name '*.[ch]' -o -name >>>>>>> >>>>>>> >>>>>>> >>>>>>> '*.mak' -o -name '[Mm]akefile' ) -print | cpio -pdmu >>>>>>> >>>>>>> >>>>>>> >>>>>>> /usr/lib/hsfmodem/modules >>>>>>> >>>>>>> >>>>>>> >>>>>>> 3712 blocks >>>>>>> >>>>>>> >>>>>>> >>>>>>> find binaries -depth -print | cpio -pdmu /usr/lib/hsfmodem/modules >>>>>>> >>>>>>> >>>>>>> >>>>>>> 0 blocks >>>>>>> >>>>>>> >>>>>>> >>>>>>> make[1]: Leaving directory >>>>>>> >>>>>>> >>>>>>> >>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules' >>>>>>> >>>>>>> >>>>>>> >>>>>>> make[1]: Entering directory >>>>>>> >>>>>>> >>>>>>> >>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag' >>>>>>> >>>>>>> >>>>>>> >>>>>>> make[1]: Nothing to be done for `install'. >>>>>>> >>>>>>> >>>>>>> >>>>>>> make[1]: Leaving directory >>>>>>> >>>>>>> >>>>>>> >>>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag' >>>>>>> >>>>>>> >>>>>>> >>>>>>> mkdir -p /etc/hsfmodem/log >>>>>>> >>>>>>> >>>>>>> >>>>>>> install -m 444 LICENSE /usr/lib/hsfmodem >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> To complete the installation and configuration of your modem, >>>>>>> >>>>>>> >>>>>>> >>>>>>> please run "hsfconfig" (or "/usr/sbin/hsfconfig") >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Might it be with Ubuntu? I used generic package with >>>>>>> >>>>>>> >>>>>>> >>>>>>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ uname -a >>>>>>> >>>>>>> >>>>>>> >>>>>>> Linux acer-aspire-1 2.6.40-4.fc15.i686 #1 SMP Fri Jul 29 18:54:39 UTC >>>>>>> >>>>>>> >>>>>>> >>>>>>> 2011 i686 i686 i386 GNU/Linux >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Maybe Marv can test to find out what could be wrong? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Antonio >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Thu, Aug 25, 2011 at 8:02 PM, Antonio Olivares >>>>>>> >>>>>>> >>>>>>> >>>>>>> <olivares14031@xxxxxxxxx> wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Jeffrey, >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> In the case you provided, you installed/tried to install the >>>>>>> >>>>>>> >>>>>>>> alsa-linuxant package? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> You may not have needed this package. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> You do have kernel sources and compiler ready. However, the >>>>>>> >>>>>>> >>>>>>>> replacements on the hsfmodem would differ with the ones suggested by >>>>>>> >>>>>>> >>>>>>>> Jonathan(Linuxant support), DECLARE_MUTEX, with DEFINE_SEMAPHORE >>>>>>>> after >>>>>>> >>>>>>> >>>>>>>> you have detected where it bombs out or wait a bit till >>>>>>>> they(Linuxant) >>>>>>> >>>>>>> >>>>>>>> patch up the code and make it ready to work. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> If someone has suggestions, please forward them to Jeffrey. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Regards, >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Antonio >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> On Thu, Aug 25, 2011 at 5:15 PM,<cohanjeffrey@xxxxxxx> wrote: >>>>>>> >>>>>>> >>>>>>>>> Great to hear from you Antonio. I'm working only with the Sony >>>>>>>>> 32-bit >>>>>>>>> VAIO >>>>>>> >>>>>>> >>>>>>>>> VGN-N130G and will attach ModemData.txt again. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> 1) I did this BUT substituted /hsfmodem/ for /hcfpcimodem/ and >>>>>>>>> wvdial >>>>>>>>> does >>>>>>> >>>>>>> >>>>>>>>> not find a modem: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >>>>>>> >>>>>>> >>>>>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c >>>>>>> >>>>>>> >>>>>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >>>>>>> >>>>>>> >>>>>>>>> replace .ioctl with .compat_ioctl in: >>>>>>> >>>>>>> >>>>>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> 2) ERRORS: Both alsa-driver-linuxant and hfsmodem packages install >>>>>>>>> with >>>>>>> >>>>>>> >>>>>>>>> errors, even when I remove them and re-install. Here are excerpts: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> alsa-driver-linuxant_1.0.23.1_all.deb: >>>>>>> >>>>>>> >>>>>>>>> ----in terminal: >>>>>>> >>>>>>> >>>>>>>>> Building modules for the 2.6.38-11-generic kernel, please wait... >>>>>>>>> done. >>>>>>> >>>>>>> >>>>>>>>> ERROR: Build failed. Please review the build log at >>>>>>> >>>>>>> >>>>>>>>> /tmp/alsa-driver-linuxant.26528.log >>>>>>> >>>>>>> >>>>>>>>> dpkg: error processing alsa-driver-linuxant (--install): >>>>>>> >>>>>>> >>>>>>>>> subprocess installed post-installation script returned error exit >>>>>>>>> status >>>>>>>>> 2 >>>>>>> >>>>>>> >>>>>>>>> ----in log file: >>>>>>> >>>>>>> >>>>>>>>> checking for GCC version... Kernel compiler: Used compiler: gcc >>>>>>> >>>>>>> >>>>>>>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 >>>>>>> >>>>>>> >>>>>>>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED >>>>>>> >>>>>>> >>>>>>>>> *** Assuming the same compiler is used with the current system >>>>>>>>> compiler. >>>>>>> >>>>>>> >>>>>>>>> *** Please make sure that the same compiler version was used for >>>>>>>>> building >>>>>>> >>>>>>> >>>>>>>>> kernel. >>>>>>> >>>>>>> >>>>>>>>> and later... >>>>>>> >>>>>>> >>>>>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function >>>>>>> >>>>>>> >>>>>>>>> ‘snd_pcm_hw_params’: >>>>>>> >>>>>>> >>>>>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: >>>>>>>>> implicit >>>>>>> >>>>>>> >>>>>>>>> declaration of function ‘pm_qos_remove_requirement’ >>>>>>> >>>>>>> >>>>>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error: >>>>>>>>> implicit >>>>>>> >>>>>>> >>>>>>>>> declaration of function ‘pm_qos_add_requirement’ >>>>>>> >>>>>>> >>>>>>>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] >>>>>>>>> Error >>>>>>>>> 1 >>>>>>> >>>>>>> >>>>>>>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2 >>>>>>> >>>>>>> >>>>>>>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2 >>>>>>> >>>>>>> >>>>>>>>> make[1]: Leaving directory >>>>>>>>> `/usr/src/linux-headers-2.6.38-11-generic' >>>>>>> >>>>>>> >>>>>>>>> make: *** [compile] Error 2 >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> hsfmodem_7.80.02.06full_i386.deb: >>>>>>> >>>>>>> >>>>>>>>> /usr/lib/hsfmodem/modules/osservices.c:1396:1: warning: the frame >>>>>>>>> size >>>>>>>>> of >>>>>>> >>>>>>> >>>>>>>>> 1028 bytes is larger than 1024 bytes >>>>>>> >>>>>>> >>>>>>>>> CC [M] /usr/lib/hsfmodem/modules/osstdio.o >>>>>>> >>>>>>> >>>>>>>>> CC [M] /usr/lib/hsfmodem/modules/osnvm.o >>>>>>> >>>>>>> >>>>>>>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared >>>>>>>>> here >>>>>>>>> (not >>>>>>> >>>>>>> >>>>>>>>> in a function) >>>>>>> >>>>>>> >>>>>>>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1 >>>>>>> >>>>>>> >>>>>>>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2 >>>>>>> >>>>>>> >>>>>>>>> make[1]: Leaving directory >>>>>>>>> `/usr/src/linux-headers-2.6.38-11-generic' >>>>>>> >>>>>>> >>>>>>>>> make: *** [all] Error 2 >>>>>>> >>>>>>> >>>>>>>>> ----I have the long hsfdiag.txt file from "hsfconfig --dumpdiag" >>>>>>>>> and >>>>>>>>> the >>>>>>> >>>>>>> >>>>>>>>> buildlog files >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> 3) $ uname -a (Jonathan had asked someone for this) gets: >>>>>>> >>>>>>> >>>>>>>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri >>>>>>>>> Jul >>>>>>>>> 29 >>>>>>> >>>>>>> >>>>>>>>> 19:05:14 UTC 2011 i68 >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> 4) I had the modem working perfectly in Ubuntu 9.04, but don't >>>>>>>>> remember >>>>>>>>> how >>>>>>> >>>>>>> >>>>>>>>> I did it. Is it possible that it CAN'T be done in 11.04?! >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> I'm not sure if any of this will be of use to you, but am >>>>>>>>> particularly >>>>>>> >>>>>>> >>>>>>>>> interested in 4); and is it correct to substitute hsfmodem in 1)? >>>>>>>>> Is >>>>>>>>> 2) >>>>>>>>> an >>>>>>> >>>>>>> >>>>>>>>> issue? Also would it have been important to reboot at certain >>>>>>>>> points? >>>>>>>>> Should >>>>>>> >>>>>>> >>>>>>>>> I install a new modem in either beast? I so depend on dial-up! Many >>>>>>>>> thanks! >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> Jeffrey >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> -----Original Message----- >>>>>>> >>>>>>> >>>>>>>>> From: Antonio Olivares<olivares14031@xxxxxxxxx> >>>>>>> >>>>>>> >>>>>>>>> To: Jeffrey Cohan<cohanjeffrey@xxxxxxx> >>>>>>> >>>>>>> >>>>>>>>> Cc: discuss@xxxxxxxxxxxxx >>>>>>> >>>>>>> >>>>>>>>> Sent: Wed, Aug 24, 2011 7:17 pm >>>>>>> >>>>>>> >>>>>>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> Jeffrey, >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> In the x86_64 bit machine, if you had 32 bit linux installed, it >>>>>>>>> would >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> be a nice opportunity for you to check the modified driver *to see >>>>>>>>> if >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> it would work*, but since it is 64 bit you get the message directly >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> from ModemData.txt >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> There is no agrsm software support for x86_64 systems, through the >>>>>>>>> modem >>>>>>>>> may >>>>>>> >>>>>>> >>>>>>>>> be >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> supported on Intel/i386 installations, which do more slowly servce >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> x86_64 processors. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> * driver >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-11c11040_20110811_i386.deb >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> + new agrsm tools >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> For the other modem, Jonathan at Linuxant has posted ways to >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> circumvent the errors: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> http://linmodems.org/cgi-bin/ezmlm-cgi?1:sss:37710:201108:dpmgnpddbcjlkfmlpmin#b >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> <quote> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> Hi, >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> this is a known build issue with recent kernels, even with the >>>>>>>>> latest >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> release of the driver. A used provided the following workaround to >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> solve it: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> --- >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> replace .ioctl with .compat_ioctl in: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> --- >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> This build problem will be fixed in a future release of the driver. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> Regards, >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> Jonathan >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> Technical specialist / Linuxant >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> www.linuxant.com >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> support@xxxxxxxxxxxx >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> </quote> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> So you may try the fixes suggested by Jonathan in the meantime. Or >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> you have the option to try the driver 11c11040 but on 32 bit linux. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> Hopefully you can get one of these modems to work. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> Regards, >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> Antonio >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> On Wed, Aug 24, 2011 at 8:56 PM, Jeffrey >>>>>>>>> Cohan<cohanjeffrey@xxxxxxx> >>>>>>>>> wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> I have spent many many hours trying to get dial-up working on two >>>>>>>>>> laptops >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> and would so appreciate your help. Dial-up on either one would be >>>>>>>>>> just >>>>>>> >>>>>>> >>>>>>>>>> fine. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> I'm assuming it will be impossible on the HP laptop (64-bit) as I >>>>>>>>>> found >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> this: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> "Current support for the 11c11040 modem does NOT exist on a >>>>>>>>>> non-x86 >>>>>>>>>> system >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> (e.g. AMD, or x86_64.) This is because there is a proprietary core >>>>>>>>>> in >>>>>>>>>> the >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> code compiled for x86 systems." >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> On the VAIO (32-bit) it worked perfectly in an earlier version of >>>>>>>>>> Ubuntu >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> before upgrading. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> I can't seem to find an appropriate driver at www.linuxant.com for >>>>>>>>>> my >>>>>>> >>>>>>> >>>>>>>>>> Linux >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> version 2.6.38-11-generic. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> Alsa-driver-linuxant doesn't seem to be properly installed. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> I get this error message: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> ERROR: Module build failed! >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> Please examine the log file >>>>>>> >>>>>>> >>>>>>>>>> "/etc/hsfmodem/log/buildlog-20110824182445.txt" >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> to determine why. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> dpkg: error processing alsa-driver-linuxant (--configure): >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> subprocess installed post-installation script returned error exit >>>>>>>>>> status >>>>>>> >>>>>>> >>>>>>>>>> 2 >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> Errors were encountered while processing: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> alsa-driver-linuxant >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> E: Sub-process /usr/bin/dpkg returned an error code (1) >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> =============== >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> Thanks much! >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> Jeff >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> > >
