let's skip the USB modem possibiity, at least until the hsfmodem issues are clarified. Marv On Sat, Aug 27, 2011 at 4:57 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote: > Antonio and Marv, > > OK maybe I have something - I do not get an error message with dgcconfig > after installing dgcmodem_1.13_i386.deb. Should I acquire a USB modem, and > which one? the Rockwell one? > > I do get this: > The /dev/modem alias (symlink) points to ttySHSF0 > > Jeffrey > > > -----Original Message----- > From: Jeffrey Cohan <cohanjeffrey@xxxxxxx> > To: olivares14031@xxxxxxxxx > Cc: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx; support@xxxxxxxxxxxx > Sent: Sat, Aug 27, 2011 1:43 pm > Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? > > Hi Antonio! > > in response I get > GNU grep 2.6.3 > License GPLv3+: GNU GPL version 3 or later > > ...so all is ok? I'm trying to install dgcmodem_1.13_i386.deb which I have > unzipped but can't yet get dpkg to work (I get "dpkg: error: need an action > option") and will let you know how it goes. Again, I'd be happy to > re-install Ubuntu if necessary. > > Jeff > > > -----Original Message----- > From: Antonio Olivares <olivares14031@xxxxxxxxx> > To: Jeffrey Cohan <cohanjeffrey@xxxxxxx> > Cc: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx; support@xxxxxxxxxxxx > Sent: Sat, Aug 27, 2011 1:20 pm > Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? > > Jeffrey, > > I made a BOO-BOO(mistake), instead of uname -a , dmesg | grep 'gcc' > hen gcc --version like > > [olivares@acer-aspire-1 ~]$ dmesg | grep 'gcc' > [ 0.000000] Linux version 2.6.40-4.fc15.i686 > (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.0 20110530 > (Red Hat 4.6.0-9) (GCC) ) #1 SMP Fri Jul 29 18:54:39 UTC 2011 > [olivares@acer-aspire-1 ~]$ gcc --version > gcc (GCC) 4.6.0 20110603 (Red Hat 4.6.0-10) > Copyright (C) 2011 Free Software Foundation, Inc. > This is free software; see the source for copying conditions. There is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > > [olivares@acer-aspire-1 ~]$ > > Notice that the gcc versions do match :) > > You may pursue to try Marv's suggestion linuxant's usb drivers and see > if they work. > > Regards, > > Antonio > > On Sat, Aug 27, 2011 at 1:47 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote: >> Antonio, here's what I get - do these correspond? >> >> uname -a >> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri Jul 29 >> 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux >> >> gcc --version >> gcc (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 >> Copyright (C) 2010 Free Software Foundation, Inc. >> >> I'll gladly reinstall anything! and will look at your other options as >> well. >> Thanks, >> >> Jeffrey >> - - - - - - >> >> Jeffrey, >> >> On Sat, Aug 27, 2011 at 11:42 AM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> >> wrote: >> >>> Good morning Antonio! I found something from you about the USRobotics >>> USR5637 USB modem, and I'm assuming that DIDN'T work out on Ubuntu 11.04? >>> I >>> don't find anything on the web that confirms that any other USB modem >>> does >>> work. Or a replacement internal one for the VAIO? >>> >>> I'm reluctant to install an older Ubuntu version as you suggest Marv as >>> sooner or later it would not be supported, because it would take so much >>> time to go back and forth unless one version can be accessed within >>> another >>> (at home I have only dial-up and use it many times each day) and because >>> of >>> a potential problem with Thunderbird: due to family needs I go between >>> the >>> 2 >>> laptops (I can check email via wifi when not at home), must keep my >>> Thunderbird profile on an external drive, and the profile has been >>> severely >>> compromised when accessed through different systems/versions (I'd like to >>> have the latest Ubuntu on both machines, and do need to use both to run >>> ALL >>> of my software). If it were for the occasional fax, this option would be >>> fine. >>> >> >> Maybe you can install an older kernel, for the meantime to give some >> time for a fix. >> >>> >>> So I'll assume that the message: >>> no device detected by hsf driver - HDA modems may require reboot >>> Note: HDA support not compiled in the driver >>> >>> ...leads me too a dead end. On both computers, alas. >>> >>> On this page: >>> https://help.ubuntu.com/community/DialupModemHowto/Conexant >>> shouldn't this link: >>> For Ubuntu 11.04 (Natty Narwhal): You can follow the steps on this >>> thread. >>> : >>> http://ubuntuforums.org/showthread.php?t=1781268 >>> be removed? or why would it not work in my case? >>> >> >> Might be due to some kernel problem* , kernel devel package/kernel >> headers, some type of mismatch when I see the errors in the messages >> that you have sent us: >> >> <quote> >> alsa-driver-linuxant_1.0.23.1_all.deb: >> ----in terminal: >> Building modules for the 2.6.38-11-generic kernel, please wait... done. >> ERROR: Build failed. Please review the build log at >> /tmp/alsa-driver-linuxant.26528.log >> dpkg: error processing alsa-driver-linuxant (--install): >> subprocess installed post-installation script returned error exit status >> 2 >> ----in log file: >> checking for GCC version... Kernel compiler: Used compiler: gcc >> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 >> *** NO PREDEFINED KERNEL COMPILER IS DETECTED >> *** Assuming the same compiler is used with the current system compiler. >> *** Please make sure that the same compiler version was used for >> building kernel. >> and later... >> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function >> ‘snd_pcm_hw_params’: >> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: >> implicit declaration of function ‘pm_qos_remove_requirement’ >> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error: >> implicit declaration of function ‘pm_qos_add_requirement’ >> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error 1 >> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2 >> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2 >> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' >> make: *** [compile] Error 2 >> </quote> >> >> This line ``*** NO PREDEFINED KERNEL COMPILER IS DETECTED >> *** Assuming the same compiler is used with the current system compiler. >> *** Please make sure that the same compiler version was used for >> building kernel. >> '' is the one that makes me believe that the running kernel is not the >> same gcc as the one in the system. In this case and in others it is >> important that the running kernel and the gcc be the same so that no >> errors occurs. If you can you can confirm >> >> run >> $ uname -a >> and >> $ gcc --version >> >> and that may tell us why things are not working. To get it working, >> the kernel and the gcc must be the same. >> >> If you want and have access to a livecd like >> Knoppix/Slax/Porteus/Puppy/..., you can use some of these at least to >> get a connection to internet via dialup. Puppy in many cases has out >> of box support for many winmodems. In porteus I have successfully >> built some buildscripts to build a module that will make the modems >> work. Some modems except the hsf/hcf modems since these are >> proprietary, except for the 14 kbps one but that one many people would >> get mad in the case that it is built(they would want full speed, and >> it is a difficult to accomodate to many people*). One person built >> such a module for slax, but I have no status for it as Slax has not >> been updated for a while. Without screwing up your running system >> and/or installing again you may try out one livecd(if you can get one) >> and try the driver and see if you can make the modem work and connect >> via dialup or install a kernel that matches gcc and try the fixes >> again. >> >> * unless you have a Dell machine, then you can use the oem drivers and >> you can get full speed on the modem. >> >> If you have a cell phone, you may also use it as a modem to connect to >> internet. In ModemData.txt, there is a report you can see : >> >> If a cellphone is not detected, see >> http://ubuntuforums.org/archive/index.php/t-878554.html >> A sample report is: >> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html >> >> Don't get discouraged, a little bit of patience can go a long way. I >> almost forgot, you can also virtualize a version of linux and with an >> older kernel you can run an older installation along with your current >> one and have a working dialup connection on that one with a working >> driver. These are things you can take a look at. >> >> When there were no fixes for smartlink modem after kernel 2.6.30/31, I >> used Slax livecd with older kernel to access the internet and then >> later the fixes came along thanks to a person that figured things out. >> You may try to do something similar and not be left without internet >> for a fix to come in the meantime. Hang in there! You can do it. >> >> Regards, >> >> >> >> Antonio >> >>> >>> I've much appreciated your advice - thanks! >>> >>> Jeff >>> >>> >>> >>> -----Original Message----- >>> From: cohanjeffrey@xxxxxxx >>> To: olivares14031@xxxxxxxxx; marvin.stodolsky@xxxxxxxxx; >>> discuss@xxxxxxxxxxxxx; support@xxxxxxxxxxxx >>> Sent: Fri, Aug 26, 2011 7:23 pm >>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>> >>> Thank you Antonio and Marv - really appreciate it! >>> >>> After another full day I'll try to take your advice tomorrow Marv, and it >>> seems from Ganton at >>> http://ubuntuforums.org/showthread.php?t=1597605&page=4 >>> that the most recent kernel that will work will be Ubuntu 10.10. Or could >>> I >>> buy an external modem on ebay that is said to work on Linux? If you have >>> further ideas after reading what follows (especially, re "Warning: no >>> device >>> detected by hsf driver - HDA modems may require reboot" and "Note: HDA >>> support not compiled in the driver"), I would be most grateful! >>> >>> Today I removed alsa-driver-linuxant and installed >>> hsfmodem-7.80.02.06full, >>> and got code similar to yours Antonio. >>> >>> But an "hsfconfig" resulted in (excerpts): >>> Conexant HSF softmodem driver, version 7.80.02.06full >>> When reporting a problem for the first time, please send >>> us the file generated by "hsfconfig --dumpdiag". >>> No pre-built modules for: Ubuntu-11.04 linux-2.6.38-11-generic i686-SMP >>> ...and the punchline: >>> ERROR: Module build failed! >>> - - - >>> buildlog excerpts: >>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here >>> (not >>> in a function) >>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1 >>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2 >>> >>> so I again did this: >>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >>> - /usr/lib/hcfpcimodem/modules/osnvm.c >>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >>> replace .ioctl with .compat_ioctl in: >>> - /usr/lib/hcfpcimodem/modules/osdiag.c >>> >>> and "hsfconfig" got... >>> Warning: no device detected by hsf driver - HDA modems may require reboot >>> Note: HDA support not compiled in the driver >>> >>> then I ran everything (whew!) from "Ganton's Avatar" at >>> http://ubuntuforums.org/showthread.php?t=1781268 >>> and again got exactly the same message with "hsfconfig" >>> (issue not [SOLVED] as stated) >>> >>> with another hsfconfig, it asked >>> Warning: existing driver modules found under: >>> /lib/modules/2.6.38-11-generic/ >>> Would you like to keep using them? [no] >>> ...and I pressed [enter] >>> but got similar results >>> - - - (end of exploits for the day, besides a little blackberry >>> picking)- >>> - - - - - >>> >>> Thanks again for helping, >>> >>> Jeff >>> >>> >>> >>> -----Original Message----- >>> From: Antonio Olivares <olivares14031@xxxxxxxxx> >>> To: cohanjeffrey@xxxxxxx >>> Cc: discuss@xxxxxxxxxxxxx; Linuxant support (Jonathan) >>> <support@xxxxxxxxxxxx>; Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >>> Sent: Thu, Aug 25, 2011 6:56 pm >>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>> >>> >>> >>> >>> Jeffrey, >>> >>> >>> >>> >>> >>> >>> >>> Something is strange. I try the package (hsf) and it runs for me, I >>> >>> >>> >>> can't find errors: >>> >>> >>> >>> >>> >>> >>> >>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ su -c 'make install' >>> >>> >>> >>> Password: >>> >>> >>> >>> make[1]: Entering directory >>> >>> >>> >>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm' >>> >>> >>> >>> mkdir -m 755 -p cvt >>> >>> >>> >>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>> >>> >>> >>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>> >>> >>> >>> inf/hsfpcibasic2.inf | ./cvtinf.pl cvt/hsfpcibasic2; if [ -n >>> >>> >>> >>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2 < "inf/hsf.cty"; >>> >>> >>> >>> else true; fi >>> >>> >>> >>> (cd cvt/hsfpcibasic2/Region && grep -v -l '*' *NAME | sed -e 's/^0//' >>> >>> >>> >>> -e 's/^0//' -e 's/_NAME$//' | tr ' >>> ' ',' | sed -e 's/,$//' -e >>> >>> >>> >>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic2/COUNTRY_CODE_LIST >>> >>> >>> >>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>> >>> >>> >>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>> >>> >>> >>> inf/hsfpcibasic2smart.inf | ./cvtinf.pl cvt/hsfpcibasic2smart; if [ -n >>> >>> >>> >>> "" ]; then ./cvtinf.pl cvt/hsfpcibasic2smart < ""; else true; fi >>> >>> >>> >>> if [ -d cvt/hsfpcibasic2/Profile ]; then ln -sf >>> >>> >>> >>> ../hsfpcibasic2/Profile cvt/hsfpcibasic2smart/.; else true; fi >>> >>> >>> >>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2smart/. >>> >>> >>> >>> (cd cvt/hsfpcibasic2smart/Region && grep -v -l '*' *NAME | sed -e >>> >>> >>> >>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >>> ' ',' | sed -e 's/,$//' >>> >>> >>> >>> -e 's/^/"/' -e 's/$/"/' ; echo "") > >>> >>> >>> >>> cvt/hsfpcibasic2smart/COUNTRY_CODE_LIST >>> >>> >>> >>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>> >>> >>> >>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>> >>> >>> >>> inf/hsfpcibasic2hsfi.inf | ./cvtinf.pl cvt/hsfpcibasic2hsfi; if [ -n >>> >>> >>> >>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2hsfi < >>> >>> >>> >>> "inf/hsf.cty"; else true; fi >>> >>> >>> >>> rm -rf cvt/hsfpcibasic2hsfi/Region >>> >>> >>> >>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2hsfi/. >>> >>> >>> >>> (cd cvt/hsfpcibasic2hsfi/Region && grep -v -l '*' *NAME | sed -e >>> >>> >>> >>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >>> ' ',' | sed -e 's/,$//' >>> >>> >>> >>> -e 's/^/"/' -e 's/$/"/' ; echo "") > >>> >>> >>> >>> cvt/hsfpcibasic2hsfi/COUNTRY_CODE_LIST >>> >>> >>> >>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>> >>> >>> >>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>> >>> >>> >>> inf/hsfpcibasic2bry.inf | ./cvtinf.pl cvt/hsfpcibasic2bry; if [ -n >>> >>> >>> >>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2bry < "inf/hsf.cty"; >>> >>> >>> >>> else true; fi >>> >>> >>> >>> rm -rf cvt/hsfpcibasic2bry/Region >>> >>> >>> >>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2bry/. >>> >>> >>> >>> (cd cvt/hsfpcibasic2bry/Region && grep -v -l '*' *NAME | sed -e >>> >>> >>> >>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >>> ' ',' | sed -e 's/,$//' >>> >>> >>> >>> -e 's/^/"/' -e 's/$/"/' ; echo "") > >>> >>> >>> >>> cvt/hsfpcibasic2bry/COUNTRY_CODE_LIST >>> >>> >>> >>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>> >>> >>> >>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>> >>> >>> >>> inf/hsfpcibasic3.inf | ./cvtinf.pl cvt/hsfpcibasic3; if [ -n >>> >>> >>> >>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic3 < "inf/hsf.cty"; >>> >>> >>> >>> else true; fi >>> >>> >>> >>> rm -rf cvt/hsfpcibasic3/Region >>> >>> >>> >>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic3/. >>> >>> >>> >>> (cd cvt/hsfpcibasic3/Region && grep -v -l '*' *NAME | sed -e 's/^0//' >>> >>> >>> >>> -e 's/^0//' -e 's/_NAME$//' | tr ' >>> ' ',' | sed -e 's/,$//' -e >>> >>> >>> >>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic3/COUNTRY_CODE_LIST >>> >>> >>> >>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>> >>> >>> >>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>> >>> >>> >>> inf/hsfmc97ich.inf | ./cvtinf.pl cvt/hsfmc97; if [ -n "" ]; then >>> >>> >>> >>> ./cvtinf.pl cvt/hsfmc97 < ""; else true; fi >>> >>> >>> >>> rm -f mc97/HW_ADAPTER_TYPE >>> >>> >>> >>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfmc97/. >>> >>> >>> >>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfmc97/. >>> >>> >>> >>> (cd cvt/hsfmc97/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e >>> >>> >>> >>> 's/^0//' -e 's/_NAME$//' | tr ' >>> ' ',' | sed -e 's/,$//' -e 's/^/"/' >>> >>> >>> >>> -e 's/$/"/' ; echo "") > cvt/hsfmc97/COUNTRY_CODE_LIST >>> >>> >>> >>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ali >>> >>> >>> >>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ati >>> >>> >>> >>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ich >>> >>> >>> >>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97sis >>> >>> >>> >>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97via >>> >>> >>> >>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>> >>> >>> >>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>> >>> >>> >>> inf/hsfcadmus2.inf | ./cvtinf.pl cvt/hsfcadmus2; if [ -n "" ]; then >>> >>> >>> >>> ./cvtinf.pl cvt/hsfcadmus2 < ""; else true; fi >>> >>> >>> >>> rm -f cadmus2/HW_ADAPTER_TYPE >>> >>> >>> >>> ln -sf ../hsfpcibasic2/Profile cvt/hsfcadmus2/. >>> >>> >>> >>> ln -sf ../hsfpcibasic2/Region cvt/hsfcadmus2/. >>> >>> >>> >>> (cd cvt/hsfcadmus2/Region && grep -v -l '*' *NAME | sed -e 's/^0//' >>> >>> >>> >>> -e 's/^0//' -e 's/_NAME$//' | tr ' >>> ' ',' | sed -e 's/,$//' -e >>> >>> >>> >>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfcadmus2/COUNTRY_CODE_LIST >>> >>> >>> >>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>> >>> >>> >>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>> >>> >>> >>> inf/hsfcadmus2smart.inf | ./cvtinf.pl cvt/hsfcadmus2smart; if [ -n "" >>> >>> >>> >>> ]; then ./cvtinf.pl cvt/hsfcadmus2smart < ""; else true; fi >>> >>> >>> >>> rm -f cadmus2smart/HW_ADAPTER_TYPE >>> >>> >>> >>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfcadmus2smart/. >>> >>> >>> >>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfcadmus2smart/. >>> >>> >>> >>> (cd cvt/hsfcadmus2smart/Region && grep -v -l '*' *NAME | sed -e >>> >>> >>> >>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >>> ' ',' | sed -e 's/,$//' >>> >>> >>> >>> -e 's/^/"/' -e 's/$/"/' ; echo "") > >>> >>> >>> >>> cvt/hsfcadmus2smart/COUNTRY_CODE_LIST >>> >>> >>> >>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>> >>> >>> >>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>> >>> >>> >>> inf/hsfhda.inf | ./cvtinf.pl cvt/hsfhda; if [ -n "" ]; then >>> >>> >>> >>> ./cvtinf.pl cvt/hsfhda < ""; else true; fi >>> >>> >>> >>> rm -f hda/HW_ADAPTER_TYPE >>> >>> >>> >>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfhda/. >>> >>> >>> >>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfhda/. >>> >>> >>> >>> (cd cvt/hsfhda/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e >>> >>> >>> >>> 's/^0//' -e 's/_NAME$//' | tr ' >>> ' ',' | sed -e 's/,$//' -e 's/^/"/' >>> >>> >>> >>> -e 's/$/"/' ; echo "") > cvt/hsfhda/COUNTRY_CODE_LIST >>> >>> >>> >>> cd cvt && find . -type f ! -empty -exec md5sum {} ';' | sort | >>> >>> >>> >>> while read sum file ; do >>> >>> >>> >>> if [ "$sum" = "$prevsum" ] && cmp -s "$file" "$prevfile"; then >>> >>> >>> >>> rm -f "$file"; >>> >>> >>> >>> if ! ln "$prevfile" "$file"; then >>> >>> >>> >>> echo 2>&1 "$0: ln FAILED - recreate $file based on >>> $prevfile"; >>> >>> >>> >>> exit 1; >>> >>> >>> >>> fi; >>> >>> >>> >>> else >>> >>> >>> >>> prevsum="$sum"; >>> >>> >>> >>> prevfile="$file"; >>> >>> >>> >>> fi; >>> >>> >>> >>> done >>> >>> >>> >>> touch cvt/.linksame >>> >>> >>> >>> mkdir -m 755 -p /etc/hsfmodem/nvm >>> >>> >>> >>> cd cvt && (find hsfpcibasic2 hsfpcibasic2smart hsfpcibasic2hsfi >>> >>> >>> >>> hsfpcibasic2bry hsfpcibasic3 hsfmc97 hsfmc97ali hsfmc97ati >>> >>> >>> >>> hsfmc97ich hsfmc97sis hsfmc97via hsfcadmus2 hsfcadmus2smart >>> >>> >>> >>> hsfhda | cpio -pdmu /etc/hsfmodem/nvm) >>> >>> >>> >>> 127 blocks >>> >>> >>> >>> make[1]: Leaving directory >>> >>> >>> >>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm' >>> >>> >>> >>> make[1]: Entering directory >>> >>> >>> >>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts' >>> >>> >>> >>> sed >>> >>> >>> >>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>> >>> >>> >>> -e 's!@CNXTDRIVER@!hsf!g' >>> >>> >>> >>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>> >>> >>> >>> -e 's!@CNXTTARGET@!hsf!g' >>> >>> >>> >>> -e 's!@CNXTARCH@!i386!g' >>> >>> >>> >>> -e 's!@CNXTSERDEV@!HSF!g' >>> >>> >>> >>> -e 's!@CNXTMAXMDM@!8!g' >>> >>> >>> >>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>> >>> >>> >>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>> >>> >>> >>> -e 's!@CNXTSERIALMAJOR@!240!g' >>> >>> >>> >>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>> >>> >>> >>> -e 's!@CNXTSERIALMINOR@!64!g' >>> >>> >>> >>> -e 's!@CNXTDCPMAJOR@!242!g' >>> >>> >>> >>> -e 's!@CNXTDIAGMAJOR@!243!g' >>> >>> >>> >>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>> >>> >>> >>> -e 's!@CNXTSCRMAJOR@!244!g' >>> >>> >>> >>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>> >>> >>> >>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>> >>> >>> >>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>> >>> >>> >>> -e 's!@CNXTLINUX_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>> >>> >>> >>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>> >>> >>> >>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>> >>> >>> >>> -e >>> >>> >>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>> >>> >>> >>> >>> >>> >>> >>> -e >>> >>> >>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>> >>> >>> >>> >>> >>> >>> >>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>> >>> >>> >>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>> >>> >>> >>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>> >>> >>> >>> < patcher.in > patcher >>> >>> >>> >>> chmod --reference=patcher.in patcher >>> >>> >>> >>> ln -s cnxtconfig.in hsfconfig.in >>> >>> >>> >>> sed >>> >>> >>> >>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>> >>> >>> >>> -e 's!@CNXTDRIVER@!hsf!g' >>> >>> >>> >>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>> >>> >>> >>> -e 's!@CNXTTARGET@!hsf!g' >>> >>> >>> >>> -e 's!@CNXTARCH@!i386!g' >>> >>> >>> >>> -e 's!@CNXTSERDEV@!HSF!g' >>> >>> >>> >>> -e 's!@CNXTMAXMDM@!8!g' >>> >>> >>> >>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>> >>> >>> >>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>> >>> >>> >>> -e 's!@CNXTSERIALMAJOR@!240!g' >>> >>> >>> >>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>> >>> >>> >>> -e 's!@CNXTSERIALMINOR@!64!g' >>> >>> >>> >>> -e 's!@CNXTDCPMAJOR@!242!g' >>> >>> >>> >>> -e 's!@CNXTDIAGMAJOR@!243!g' >>> >>> >>> >>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>> >>> >>> >>> -e 's!@CNXTSCRMAJOR@!244!g' >>> >>> >>> >>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>> >>> >>> >>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>> >>> >>> >>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>> >>> >>> >>> -e 's!@CNXTLINUX_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>> >>> >>> >>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>> >>> >>> >>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>> >>> >>> >>> -e >>> >>> >>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>> >>> >>> >>> >>> >>> >>> >>> -e >>> >>> >>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>> >>> >>> >>> >>> >>> >>> >>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>> >>> >>> >>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>> >>> >>> >>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>> >>> >>> >>> < hsfconfig.in > hsfconfig >>> >>> >>> >>> chmod --reference=hsfconfig.in hsfconfig >>> >>> >>> >>> ln -s cnxtstop.in hsfstop.in >>> >>> >>> >>> sed >>> >>> >>> >>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>> >>> >>> >>> -e 's!@CNXTDRIVER@!hsf!g' >>> >>> >>> >>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>> >>> >>> >>> -e 's!@CNXTTARGET@!hsf!g' >>> >>> >>> >>> -e 's!@CNXTARCH@!i386!g' >>> >>> >>> >>> -e 's!@CNXTSERDEV@!HSF!g' >>> >>> >>> >>> -e 's!@CNXTMAXMDM@!8!g' >>> >>> >>> >>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>> >>> >>> >>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>> >>> >>> >>> -e 's!@CNXTSERIALMAJOR@!240!g' >>> >>> >>> >>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>> >>> >>> >>> -e 's!@CNXTSERIALMINOR@!64!g' >>> >>> >>> >>> -e 's!@CNXTDCPMAJOR@!242!g' >>> >>> >>> >>> -e 's!@CNXTDIAGMAJOR@!243!g' >>> >>> >>> >>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>> >>> >>> >>> -e 's!@CNXTSCRMAJOR@!244!g' >>> >>> >>> >>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>> >>> >>> >>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>> >>> >>> >>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>> >>> >>> >>> -e 's!@CNXTLINUX_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>> >>> >>> >>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>> >>> >>> >>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>> >>> >>> >>> -e >>> >>> >>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>> >>> >>> >>> >>> >>> >>> >>> -e >>> >>> >>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>> >>> >>> >>> >>> >>> >>> >>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>> >>> >>> >>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>> >>> >>> >>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>> >>> >>> >>> < hsfstop.in > hsfstop >>> >>> >>> >>> chmod --reference=hsfstop.in hsfstop >>> >>> >>> >>> ln -s cnxtmodconflicts.in hsfmodconflicts.in >>> >>> >>> >>> sed >>> >>> >>> >>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>> >>> >>> >>> -e 's!@CNXTDRIVER@!hsf!g' >>> >>> >>> >>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>> >>> >>> >>> -e 's!@CNXTTARGET@!hsf!g' >>> >>> >>> >>> -e 's!@CNXTARCH@!i386!g' >>> >>> >>> >>> -e 's!@CNXTSERDEV@!HSF!g' >>> >>> >>> >>> -e 's!@CNXTMAXMDM@!8!g' >>> >>> >>> >>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>> >>> >>> >>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>> >>> >>> >>> -e 's!@CNXTSERIALMAJOR@!240!g' >>> >>> >>> >>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>> >>> >>> >>> -e 's!@CNXTSERIALMINOR@!64!g' >>> >>> >>> >>> -e 's!@CNXTDCPMAJOR@!242!g' >>> >>> >>> >>> -e 's!@CNXTDIAGMAJOR@!243!g' >>> >>> >>> >>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>> >>> >>> >>> -e 's!@CNXTSCRMAJOR@!244!g' >>> >>> >>> >>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>> >>> >>> >>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>> >>> >>> >>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>> >>> >>> >>> -e 's!@CNXTLINUX_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>> >>> >>> >>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>> >>> >>> >>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>> >>> >>> >>> -e >>> >>> >>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>> >>> >>> >>> >>> >>> >>> >>> -e >>> >>> >>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>> >>> >>> >>> >>> >>> >>> >>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>> >>> >>> >>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>> >>> >>> >>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>> >>> >>> >>> < hsfmodconflicts.in > hsfmodconflicts >>> >>> >>> >>> chmod --reference=hsfmodconflicts.in hsfmodconflicts >>> >>> >>> >>> ln -s cnxtdcpd.in hsfdcpd.in >>> >>> >>> >>> sed >>> >>> >>> >>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>> >>> >>> >>> -e 's!@CNXTDRIVER@!hsf!g' >>> >>> >>> >>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>> >>> >>> >>> -e 's!@CNXTTARGET@!hsf!g' >>> >>> >>> >>> -e 's!@CNXTARCH@!i386!g' >>> >>> >>> >>> -e 's!@CNXTSERDEV@!HSF!g' >>> >>> >>> >>> -e 's!@CNXTMAXMDM@!8!g' >>> >>> >>> >>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>> >>> >>> >>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>> >>> >>> >>> -e 's!@CNXTSERIALMAJOR@!240!g' >>> >>> >>> >>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>> >>> >>> >>> -e 's!@CNXTSERIALMINOR@!64!g' >>> >>> >>> >>> -e 's!@CNXTDCPMAJOR@!242!g' >>> >>> >>> >>> -e 's!@CNXTDIAGMAJOR@!243!g' >>> >>> >>> >>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>> >>> >>> >>> -e 's!@CNXTSCRMAJOR@!244!g' >>> >>> >>> >>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>> >>> >>> >>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>> >>> >>> >>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>> >>> >>> >>> -e 's!@CNXTLINUX_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>> >>> >>> >>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>> >>> >>> >>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>> >>> >>> >>> -e >>> >>> >>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>> >>> >>> >>> >>> >>> >>> >>> -e >>> >>> >>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>> >>> >>> >>> >>> >>> >>> >>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>> >>> >>> >>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>> >>> >>> >>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>> >>> >>> >>> < hsfdcpd.in > hsfdcpd >>> >>> >>> >>> chmod --reference=hsfdcpd.in hsfdcpd >>> >>> >>> >>> install -m 700 hsfconfig hsfstop hsfmodconflicts hsfdcpd /usr/sbin >>> >>> >>> >>> ln -s rccnxt.in rchsf.in >>> >>> >>> >>> sed >>> >>> >>> >>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>> >>> >>> >>> -e 's!@CNXTDRIVER@!hsf!g' >>> >>> >>> >>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>> >>> >>> >>> -e 's!@CNXTTARGET@!hsf!g' >>> >>> >>> >>> -e 's!@CNXTARCH@!i386!g' >>> >>> >>> >>> -e 's!@CNXTSERDEV@!HSF!g' >>> >>> >>> >>> -e 's!@CNXTMAXMDM@!8!g' >>> >>> >>> >>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>> >>> >>> >>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>> >>> >>> >>> -e 's!@CNXTSERIALMAJOR@!240!g' >>> >>> >>> >>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>> >>> >>> >>> -e 's!@CNXTSERIALMINOR@!64!g' >>> >>> >>> >>> -e 's!@CNXTDCPMAJOR@!242!g' >>> >>> >>> >>> -e 's!@CNXTDIAGMAJOR@!243!g' >>> >>> >>> >>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>> >>> >>> >>> -e 's!@CNXTSCRMAJOR@!244!g' >>> >>> >>> >>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>> >>> >>> >>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>> >>> >>> >>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>> >>> >>> >>> -e 's!@CNXTLINUX_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>> >>> >>> >>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>> >>> >>> >>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>> >>> >>> >>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>> >>> >>> >>> -e >>> >>> >>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>> >>> >>> >>> >>> >>> >>> >>> -e >>> >>> >>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>> >>> >>> >>> >>> >>> >>> >>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>> >>> >>> >>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>> >>> >>> >>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>> >>> >>> >>> < rchsf.in > rchsf >>> >>> >>> >>> chmod --reference=rchsf.in rchsf >>> >>> >>> >>> mkdir -m 755 -p /usr/lib/hsfmodem >>> >>> >>> >>> install -m 700 rchsf /usr/lib/hsfmodem >>> >>> >>> >>> make[1]: Leaving directory >>> >>> >>> >>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts' >>> >>> >>> >>> make[1]: Entering directory >>> >>> >>> >>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules' >>> >>> >>> >>> rm -rf "/usr/lib/hsfmodem/config.mak" >>> >>> >>> >>> "/usr/lib/hsfmodem/modules/imported" "/usr/lib/hsfmodem/modules" >>> >>> >>> >>> mkdir -m 755 -p /usr/lib/hsfmodem/modules >>> >>> >>> >>> (cd .. && find config.mak modules/imported -depth -print | cpio -pdmu >>> >>> >>> >>> /usr/lib/hsfmodem) >>> >>> >>> >>> 5892 blocks >>> >>> >>> >>> find . ( -name COPYING -o -name '*.sh' -o -name '*.[ch]' -o -name >>> >>> >>> >>> '*.mak' -o -name '[Mm]akefile' ) -print | cpio -pdmu >>> >>> >>> >>> /usr/lib/hsfmodem/modules >>> >>> >>> >>> 3712 blocks >>> >>> >>> >>> find binaries -depth -print | cpio -pdmu /usr/lib/hsfmodem/modules >>> >>> >>> >>> 0 blocks >>> >>> >>> >>> make[1]: Leaving directory >>> >>> >>> >>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules' >>> >>> >>> >>> make[1]: Entering directory >>> >>> >>> >>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag' >>> >>> >>> >>> make[1]: Nothing to be done for `install'. >>> >>> >>> >>> make[1]: Leaving directory >>> >>> >>> >>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag' >>> >>> >>> >>> mkdir -p /etc/hsfmodem/log >>> >>> >>> >>> install -m 444 LICENSE /usr/lib/hsfmodem >>> >>> >>> >>> >>> >>> >>> >>> To complete the installation and configuration of your modem, >>> >>> >>> >>> please run "hsfconfig" (or "/usr/sbin/hsfconfig") >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> Might it be with Ubuntu? I used generic package with >>> >>> >>> >>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ uname -a >>> >>> >>> >>> Linux acer-aspire-1 2.6.40-4.fc15.i686 #1 SMP Fri Jul 29 18:54:39 UTC >>> >>> >>> >>> 2011 i686 i686 i386 GNU/Linux >>> >>> >>> >>> >>> >>> >>> >>> Maybe Marv can test to find out what could be wrong? >>> >>> >>> >>> >>> >>> >>> >>> Regards, >>> >>> >>> >>> >>> >>> >>> >>> Antonio >>> >>> >>> >>> >>> >>> >>> >>> On Thu, Aug 25, 2011 at 8:02 PM, Antonio Olivares >>> >>> >>> >>> <olivares14031@xxxxxxxxx> wrote: >>> >>> >>> >> >>>> Jeffrey, >> >>> >>> >>> >> >>>> >> >>> >>> >>> >> >>>> In the case you provided, you installed/tried to install the >> >>> >>> >>> >> >>>> alsa-linuxant package? >> >>> >>> >>> >> >>>> >> >>> >>> >>> >> >>>> You may not have needed this package. >> >>> >>> >>> >> >>>> >> >>> >>> >>> >> >>>> You do have kernel sources and compiler ready. However, the >> >>> >>> >>> >> >>>> replacements on the hsfmodem would differ with the ones suggested by >> >>> >>> >>> >> >>>> Jonathan(Linuxant support), DECLARE_MUTEX, with DEFINE_SEMAPHORE after >> >>> >>> >>> >> >>>> you have detected where it bombs out or wait a bit till they(Linuxant) >> >>> >>> >>> >> >>>> patch up the code and make it ready to work. >> >>> >>> >>> >> >>>> >> >>> >>> >>> >> >>>> If someone has suggestions, please forward them to Jeffrey. >> >>> >>> >>> >> >>>> >> >>> >>> >>> >> >>>> Regards, >> >>> >>> >>> >> >>>> >> >>> >>> >>> >> >>>> Antonio >> >>> >>> >>> >> >>>> >> >>> >>> >>> >> >>>> >> >>> >>> >>> >> >>>> On Thu, Aug 25, 2011 at 5:15 PM, <cohanjeffrey@xxxxxxx> wrote: >> >>> >>> >>> >> >>>>> Great to hear from you Antonio. I'm working only with the Sony 32-bit >>>>> VAIO >> >>> >>> >>> >> >>>>> VGN-N130G and will attach ModemData.txt again. >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> 1) I did this BUT substituted /hsfmodem/ for /hcfpcimodem/ and wvdial >>>>> does >> >>> >>> >>> >> >>>>> not find a modem: >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >> >>> >>> >>> >> >>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c >> >>> >>> >>> >> >>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >> >>> >>> >>> >> >>>>> replace .ioctl with .compat_ioctl in: >> >>> >>> >>> >> >>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> 2) ERRORS: Both alsa-driver-linuxant and hfsmodem packages install with >> >>> >>> >>> >> >>>>> errors, even when I remove them and re-install. Here are excerpts: >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> alsa-driver-linuxant_1.0.23.1_all.deb: >> >>> >>> >>> >> >>>>> ----in terminal: >> >>> >>> >>> >> >>>>> Building modules for the 2.6.38-11-generic kernel, please wait... done. >> >>> >>> >>> >> >>>>> ERROR: Build failed. Please review the build log at >> >>> >>> >>> >> >>>>> /tmp/alsa-driver-linuxant.26528.log >> >>> >>> >>> >> >>>>> dpkg: error processing alsa-driver-linuxant (--install): >> >>> >>> >>> >> >>>>> subprocess installed post-installation script returned error exit >>>>> status >>>>> 2 >> >>> >>> >>> >> >>>>> ----in log file: >> >>> >>> >>> >> >>>>> checking for GCC version... Kernel compiler: Used compiler: gcc >> >>> >>> >>> >> >>>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 >> >>> >>> >>> >> >>>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED >> >>> >>> >>> >> >>>>> *** Assuming the same compiler is used with the current system >>>>> compiler. >> >>> >>> >>> >> >>>>> *** Please make sure that the same compiler version was used for >>>>> building >> >>> >>> >>> >> >>>>> kernel. >> >>> >>> >>> >> >>>>> and later... >> >>> >>> >>> >> >>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function >> >>> >>> >>> >> >>>>> ‘snd_pcm_hw_params’: >> >>> >>> >>> >> >>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: implicit >> >>> >>> >>> >> >>>>> declaration of function ‘pm_qos_remove_requirement’ >> >>> >>> >>> >> >>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error: implicit >> >>> >>> >>> >> >>>>> declaration of function ‘pm_qos_add_requirement’ >> >>> >>> >>> >> >>>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error 1 >> >>> >>> >>> >> >>>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2 >> >>> >>> >>> >> >>>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2 >> >>> >>> >>> >> >>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' >> >>> >>> >>> >> >>>>> make: *** [compile] Error 2 >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> hsfmodem_7.80.02.06full_i386.deb: >> >>> >>> >>> >> >>>>> /usr/lib/hsfmodem/modules/osservices.c:1396:1: warning: the frame size >>>>> of >> >>> >>> >>> >> >>>>> 1028 bytes is larger than 1024 bytes >> >>> >>> >>> >> >>>>> CC [M] /usr/lib/hsfmodem/modules/osstdio.o >> >>> >>> >>> >> >>>>> CC [M] /usr/lib/hsfmodem/modules/osnvm.o >> >>> >>> >>> >> >>>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here >>>>> (not >> >>> >>> >>> >> >>>>> in a function) >> >>> >>> >>> >> >>>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1 >> >>> >>> >>> >> >>>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2 >> >>> >>> >>> >> >>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' >> >>> >>> >>> >> >>>>> make: *** [all] Error 2 >> >>> >>> >>> >> >>>>> ----I have the long hsfdiag.txt file from "hsfconfig --dumpdiag" and >>>>> the >> >>> >>> >>> >> >>>>> buildlog files >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> 3) $ uname -a (Jonathan had asked someone for this) gets: >> >>> >>> >>> >> >>>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri Jul >>>>> 29 >> >>> >>> >>> >> >>>>> 19:05:14 UTC 2011 i68 >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> 4) I had the modem working perfectly in Ubuntu 9.04, but don't remember >>>>> how >> >>> >>> >>> >> >>>>> I did it. Is it possible that it CAN'T be done in 11.04?! >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> I'm not sure if any of this will be of use to you, but am particularly >> >>> >>> >>> >> >>>>> interested in 4); and is it correct to substitute hsfmodem in 1)? Is 2) >>>>> an >> >>> >>> >>> >> >>>>> issue? Also would it have been important to reboot at certain points? >>>>> Should >> >>> >>> >>> >> >>>>> I install a new modem in either beast? I so depend on dial-up! Many >>>>> thanks! >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> Jeffrey >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> -----Original Message----- >> >>> >>> >>> >> >>>>> From: Antonio Olivares <olivares14031@xxxxxxxxx> >> >>> >>> >>> >> >>>>> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx> >> >>> >>> >>> >> >>>>> Cc: discuss@xxxxxxxxxxxxx >> >>> >>> >>> >> >>>>> Sent: Wed, Aug 24, 2011 7:17 pm >> >>> >>> >>> >> >>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> Jeffrey, >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> In the x86_64 bit machine, if you had 32 bit linux installed, it would >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> be a nice opportunity for you to check the modified driver *to see if >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> it would work*, but since it is 64 bit you get the message directly >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> from ModemData.txt >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> There is no agrsm software support for x86_64 systems, through the >>>>> modem >>>>> may >> >>> >>> >>> >> >>>>> be >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> supported on Intel/i386 installations, which do more slowly servce >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> x86_64 processors. >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> * driver >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >>>>> >>>>> >>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-11c11040_20110811_i386.deb >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> + new agrsm tools >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> For the other modem, Jonathan at Linuxant has posted ways to >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> circumvent the errors: >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >>>>> >>>>> >>>>> http://linmodems.org/cgi-bin/ezmlm-cgi?1:sss:37710:201108:dpmgnpddbcjlkfmlpmin#b >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> <quote> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> Hi, >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> this is a known build issue with recent kernels, even with the latest >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> release of the driver. A used provided the following workaround to >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> solve it: >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> --- >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> replace .ioctl with .compat_ioctl in: >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> --- >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> This build problem will be fixed in a future release of the driver. >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> Regards, >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> Jonathan >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> Technical specialist / Linuxant >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> www.linuxant.com >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> support@xxxxxxxxxxxx >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> </quote> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> So you may try the fixes suggested by Jonathan in the meantime. Or >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> you have the option to try the driver 11c11040 but on 32 bit linux. >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> Hopefully you can get one of these modems to work. >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> Regards, >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> Antonio >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> On Wed, Aug 24, 2011 at 8:56 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> >>>>> wrote: >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> I have spent many many hours trying to get dial-up working on two >>>>>> laptops >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> and would so appreciate your help. Dial-up on either one would be just >> >>> >>> >>> >> >>>>>> fine. >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> I'm assuming it will be impossible on the HP laptop (64-bit) as I >>>>>> found >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> this: >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> "Current support for the 11c11040 modem does NOT exist on a non-x86 >>>>>> system >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> (e.g. AMD, or x86_64.) This is because there is a proprietary core in >>>>>> the >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> code compiled for x86 systems." >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> On the VAIO (32-bit) it worked perfectly in an earlier version of >>>>>> Ubuntu >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> before upgrading. >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> I can't seem to find an appropriate driver at www.linuxant.com for my >> >>> >>> >>> >> >>>>>> Linux >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> version 2.6.38-11-generic. >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> Alsa-driver-linuxant doesn't seem to be properly installed. >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> I get this error message: >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> ERROR: Module build failed! >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> Please examine the log file >> >>> >>> >>> >> >>>>>> "/etc/hsfmodem/log/buildlog-20110824182445.txt" >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> to determine why. >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> dpkg: error processing alsa-driver-linuxant (--configure): >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> subprocess installed post-installation script returned error exit >>>>>> status >> >>> >>> >>> >> >>>>>> 2 >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> Errors were encountered while processing: >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> alsa-driver-linuxant >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> E: Sub-process /usr/bin/dpkg returned an error code (1) >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> =============== >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> Thanks much! >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> Jeff >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>>> >> >>> >>> >>> >> >>>> >> >>> >>> >>> >>> >>> >>> >> >
