Jeff Installing the hsfmodem on my System, there was not created a folder /usr/lib/hcfpcimodem/ So some odd remnants seem to be on your System I suggest doing uninstalls on all your modem packages , just to clean up To get the Names for the uninstalls, do $ sudo apt-cache search hsf which will display the installaled package Name Then $ sudo apt-get remove Name will uninstall it. Repeat with: $ sudo apt-cache search hcf etc. Then please again try the install of the hsfmodem package MarvS On Sat, Aug 27, 2011 at 5:31 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote: > Hi Marv, > > Actually the HP is the 64-bit machine withthe 11c11040 chip. On the VAIO I > did use > hsfmodem-7.80.02.06full.tar.gz > which I'm guessing is correct for the 32-bit Vaio, and I followed exactly > the instructions on the "for Ubuntu 11.04" link on the > DialupModemHowtoConexant page, making substitutions called for, and got > "Warning: no device detected by hsf driver - HDA modems may require reboot" > and "Note: HDA support not compiled in the driver" > - exactly as when I had previously followed Jonathan's slightly different > substitutions. Ah, you were confused as I did in fact make these changes in > the hsfmodem folder and not an hcfmodem folder, which I did not have. > > But perhaps I did successfully install the USB modem package? (see last > email) Hope so... > > Jeff > > > -----Original Message----- > From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > To: Jeffrey Cohan <cohanjeffrey@xxxxxxx>; Linmodems <discuss@xxxxxxxxxxxxx> > Sent: Sat, Aug 27, 2011 1:58 pm > Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? > > Jeff > > Let's summarize and clarify some issues. > With respect to the VIAO PC x86_64 , with the 11c11040 modem chip > there is no support. If you want to install the 32 bit Ubuntu variant on > this PC > there may be support. We haven't had a clean test since Antonio did a > code update, > but compilng is OK on Ubuntu Natty 32 bit > > With respect to the HP PC with the the Conexant chip modem, > the code package which you should be using is > hsfmodem-7.80.02.06x86_64full.tar.gz, > obtained from the bottom of > http://www.linuxant.com/drivers/hsf/full/downloads.php > > Is this the package on which you are having the compile problems? > > I am confused about your description of the attempted fixes, > because they were done on files like >> - /usr/lib/hcfpcimodem/modules/osnvm.c > but that is hcfpcimodem code, while cogent changes if any should be on > a hsfmodem code > > MarvS > > > On Sat, Aug 27, 2011 at 4:43 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote: >> Hi Antonio! >> >> in response I get >> GNU grep 2.6.3 >> License GPLv3+: GNU GPL version 3 or later >> >> ...so all is ok? I'm trying to install dgcmodem_1.13_i386.deb which I >> have >> unzipped but can't yet get dpkg to work (I get "dpkg: error: need an >> action >> option") and will let you know how it goes. Again, I'd be happy to >> re-install Ubuntu if necessary. >> >> Jeff >> >> >> -----Original Message----- >> From: Antonio Olivares <olivares14031@xxxxxxxxx> >> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx> >> Cc: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx; >> support@xxxxxxxxxxxx >> Sent: Sat, Aug 27, 2011 1:20 pm >> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >> >> Jeffrey, >> >> I made a BOO-BOO(mistake), instead of uname -a , dmesg | grep 'gcc' >> hen gcc --version like >> >> [olivares@acer-aspire-1 ~]$ dmesg | grep 'gcc' >> [ 0.000000] Linux version 2.6.40-4.fc15.i686 >> (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.0 20110530 >> (Red Hat 4.6.0-9) (GCC) ) #1 SMP Fri Jul 29 18:54:39 UTC 2011 >> [olivares@acer-aspire-1 ~]$ gcc --version >> gcc (GCC) 4.6.0 20110603 (Red Hat 4.6.0-10) >> Copyright (C) 2011 Free Software Foundation, Inc. >> This is free software; see the source for copying conditions. There is NO >> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR >> PURPOSE. >> >> [olivares@acer-aspire-1 ~]$ >> >> Notice that the gcc versions do match :) >> >> You may pursue to try Marv's suggestion linuxant's usb drivers and see >> if they work. >> >> Regards, >> >> Antonio >> >> On Sat, Aug 27, 2011 at 1:47 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> >> wrote: >>> Antonio, here's what I get - do these correspond? >>> >>> uname -a >>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri Jul >>> 29 >>> 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux >>> >>> gcc --version >>> gcc (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 >>> Copyright (C) 2010 Free Software Foundation, Inc. >>> >>> I'll gladly reinstall anything! and will look at your other options as >>> well. >>> Thanks, >>> >>> Jeffrey >>> - - - - - - >>> >>> Jeffrey, >>> >>> On Sat, Aug 27, 2011 at 11:42 AM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> >>> wrote: >>> >>>> Good morning Antonio! I found something from you about the USRobotics >>>> USR5637 USB modem, and I'm assuming that DIDN'T work out on Ubuntu >>>> 11.04? >>>> I >>>> don't find anything on the web that confirms that any other USB modem >>>> does >>>> work. Or a replacement internal one for the VAIO? >>>> >>>> I'm reluctant to install an older Ubuntu version as you suggest Marv as >>>> sooner or later it would not be supported, because it would take so much >>>> time to go back and forth unless one version can be accessed within >>>> another >>>> (at home I have only dial-up and use it many times each day) and because >>>> of >>>> a potential problem with Thunderbird: due to family needs I go between >>>> the >>>> 2 >>>> laptops (I can check email via wifi when not at home), must keep my >>>> Thunderbird profile on an external drive, and the profile has been >>>> severely >>>> compromised when accessed through different systems/versions (I'd like >>>> to >>>> have the latest Ubuntu on both machines, and do need to use both to run >>>> ALL >>>> of my software). If it were for the occasional fax, this option would be >>>> fine. >>>> >>> >>> Maybe you can install an older kernel, for the meantime to give some >>> time for a fix. >>> >>>> >>>> So I'll assume that the message: >>>> no device detected by hsf driver - HDA modems may require reboot >>>> Note: HDA support not compiled in the driver >>>> >>>> ...leads me too a dead end. On both computers, alas. >>>> >>>> On this page: >>>> https://help.ubuntu.com/community/DialupModemHowto/Conexant >>>> shouldn't this link: >>>> For Ubuntu 11.04 (Natty Narwhal): You can follow the steps on this >>>> thread. >>>> : >>>> http://ubuntuforums.org/showthread.php?t=1781268 >>>> be removed? or why would it not work in my case? >>>> >>> >>> Might be due to some kernel problem* , kernel devel package/kernel >>> headers, some type of mismatch when I see the errors in the messages >>> that you have sent us: >>> >>> <quote> >>> alsa-driver-linuxant_1.0.23.1_all.deb: >>> ----in terminal: >>> Building modules for the 2.6.38-11-generic kernel, please wait... done. >>> ERROR: Build failed. Please review the build log at >>> /tmp/alsa-driver-linuxant.26528.log >>> dpkg: error processing alsa-driver-linuxant (--install): >>> subprocess installed post-installation script returned error exit status >>> 2 >>> ----in log file: >>> checking for GCC version... Kernel compiler: Used compiler: gcc >>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 >>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED >>> *** Assuming the same compiler is used with the current system compiler. >>> *** Please make sure that the same compiler version was used for >>> building kernel. >>> and later... >>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function >>> ‘snd_pcm_hw_params’: >>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: >>> implicit declaration of function ‘pm_qos_remove_requirement’ >>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error: >>> implicit declaration of function ‘pm_qos_add_requirement’ >>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error 1 >>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2 >>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2 >>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' >>> make: *** [compile] Error 2 >>> </quote> >>> >>> This line ``*** NO PREDEFINED KERNEL COMPILER IS DETECTED >>> *** Assuming the same compiler is used with the current system compiler. >>> *** Please make sure that the same compiler version was used for >>> building kernel. >>> '' is the one that makes me believe that the running kernel is not the >>> same gcc as the one in the system. In this case and in others it is >>> important that the running kernel and the gcc be the same so that no >>> errors occurs. If you can you can confirm >>> >>> run >>> $ uname -a >>> and >>> $ gcc --version >>> >>> and that may tell us why things are not working. To get it working, >>> the kernel and the gcc must be the same. >>> >>> If you want and have access to a livecd like >>> Knoppix/Slax/Porteus/Puppy/..., you can use some of these at least to >>> get a connection to internet via dialup. Puppy in many cases has out >>> of box support for many winmodems. In porteus I have successfully >>> built some buildscripts to build a module that will make the modems >>> work. Some modems except the hsf/hcf modems since these are >>> proprietary, except for the 14 kbps one but that one many people would >>> get mad in the case that it is built(they would want full speed, and >>> it is a difficult to accomodate to many people*). One person built >>> such a module for slax, but I have no status for it as Slax has not >>> been updated for a while. Without screwing up your running system >>> and/or installing again you may try out one livecd(if you can get one) >>> and try the driver and see if you can make the modem work and connect >>> via dialup or install a kernel that matches gcc and try the fixes >>> again. >>> >>> * unless you have a Dell machine, then you can use the oem drivers and >>> you can get full speed on the modem. >>> >>> If you have a cell phone, you may also use it as a modem to connect to >>> internet. In ModemData.txt, there is a report you can see : >>> >>> If a cellphone is not detected, see >>> http://ubuntuforums.org/archive/index.php/t-878554.html >>> A sample report is: >>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html >>> >>> Don't get discouraged, a little bit of patience can go a long way. I >>> almost forgot, you can also virtualize a version of linux and with an >>> older kernel you can run an older installation along with your current >>> one and have a working dialup connection on that one with a working >>> driver. These are things you can take a look at. >>> >>> When there were no fixes for smartlink modem after kernel 2.6.30/31, I >>> used Slax livecd with older kernel to access the internet and then >>> later the fixes came along thanks to a person that figured things out. >>> You may try to do something similar and not be left without internet >>> for a fix to come in the meantime. Hang in there! You can do it. >>> >>> Regards, >>> >>> >>> >>> Antonio >>> >>>> >>>> I've much appreciated your advice - thanks! >>>> >>>> Jeff >>>> >>>> >>>> >>>> -----Original Message----- >>>> From: cohanjeffrey@xxxxxxx >>>> To: olivares14031@xxxxxxxxx; marvin.stodolsky@xxxxxxxxx; >>>> discuss@xxxxxxxxxxxxx; support@xxxxxxxxxxxx >>>> Sent: Fri, Aug 26, 2011 7:23 pm >>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>>> >>>> Thank you Antonio and Marv - really appreciate it! >>>> >>>> After another full day I'll try to take your advice tomorrow Marv, and >>>> it >>>> seems from Ganton at >>>> http://ubuntuforums.org/showthread.php?t=1597605&page=4 >>>> that the most recent kernel that will work will be Ubuntu 10.10. Or >>>> could >>>> I >>>> buy an external modem on ebay that is said to work on Linux? If you have >>>> further ideas after reading what follows (especially, re "Warning: no >>>> device >>>> detected by hsf driver - HDA modems may require reboot" and "Note: HDA >>>> support not compiled in the driver"), I would be most grateful! >>>> >>>> Today I removed alsa-driver-linuxant and installed >>>> hsfmodem-7.80.02.06full, >>>> and got code similar to yours Antonio. >>>> >>>> But an "hsfconfig" resulted in (excerpts): >>>> Conexant HSF softmodem driver, version 7.80.02.06full >>>> When reporting a problem for the first time, please send >>>> us the file generated by "hsfconfig --dumpdiag". >>>> No pre-built modules for: Ubuntu-11.04 linux-2.6.38-11-generic i686-SMP >>>> ...and the punchline: >>>> ERROR: Module build failed! >>>> - - - >>>> buildlog excerpts: >>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here >>>> (not >>>> in a function) >>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1 >>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2 >>>> >>>> so I again did this: >>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >>>> - /usr/lib/hcfpcimodem/modules/osnvm.c >>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >>>> replace .ioctl with .compat_ioctl in: >>>> - /usr/lib/hcfpcimodem/modules/osdiag.c >>>> >>>> and "hsfconfig" got... >>>> Warning: no device detected by hsf driver - HDA modems may require >>>> reboot >>>> Note: HDA support not compiled in the driver >>>> >>>> then I ran everything (whew!) from "Ganton's Avatar" at >>>> http://ubuntuforums.org/showthread.php?t=1781268 >>>> and again got exactly the same message with "hsfconfig" >>>> (issue not [SOLVED] as stated) >>>> >>>> with another hsfconfig, it asked >>>> Warning: existing driver modules found under: >>>> /lib/modules/2.6.38-11-generic/ >>>> Would you like to keep using them? [no] >>>> ...and I pressed [enter] >>>> but got similar results >>>> - - - (end of exploits for the day, besides a little blackberry >>>> picking)- >>>> - - - - - >>>> >>>> Thanks again for helping, >>>> >>>> Jeff >>>> >>>> >>>> >>>> -----Original Message----- >>>> From: Antonio Olivares <olivares14031@xxxxxxxxx> >>>> To: cohanjeffrey@xxxxxxx >>>> Cc: discuss@xxxxxxxxxxxxx; Linuxant support (Jonathan) >>>> <support@xxxxxxxxxxxx>; Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >>>> Sent: Thu, Aug 25, 2011 6:56 pm >>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>>> >>>> >>>> >>>> >>>> Jeffrey, >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Something is strange. I try the package (hsf) and it runs for me, I >>>> >>>> >>>> >>>> can't find errors: >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ su -c 'make install' >>>> >>>> >>>> >>>> Password: >>>> >>>> >>>> >>>> make[1]: Entering directory >>>> >>>> >>>> >>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm' >>>> >>>> >>>> >>>> mkdir -m 755 -p cvt >>>> >>>> >>>> >>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>> >>>> >>>> >>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>> >>>> >>>> >>>> inf/hsfpcibasic2.inf | ./cvtinf.pl cvt/hsfpcibasic2; if [ -n >>>> >>>> >>>> >>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2 < "inf/hsf.cty"; >>>> >>>> >>>> >>>> else true; fi >>>> >>>> >>>> >>>> (cd cvt/hsfpcibasic2/Region && grep -v -l '*' *NAME | sed -e 's/^0//' >>>> >>>> >>>> >>>> -e 's/^0//' -e 's/_NAME$//' | tr ' >>>> ' ',' | sed -e 's/,$//' -e >>>> >>>> >>>> >>>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic2/COUNTRY_CODE_LIST >>>> >>>> >>>> >>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>> >>>> >>>> >>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>> >>>> >>>> >>>> inf/hsfpcibasic2smart.inf | ./cvtinf.pl cvt/hsfpcibasic2smart; if [ -n >>>> >>>> >>>> >>>> "" ]; then ./cvtinf.pl cvt/hsfpcibasic2smart < ""; else true; fi >>>> >>>> >>>> >>>> if [ -d cvt/hsfpcibasic2/Profile ]; then ln -sf >>>> >>>> >>>> >>>> ../hsfpcibasic2/Profile cvt/hsfpcibasic2smart/.; else true; fi >>>> >>>> >>>> >>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2smart/. >>>> >>>> >>>> >>>> (cd cvt/hsfpcibasic2smart/Region && grep -v -l '*' *NAME | sed -e >>>> >>>> >>>> >>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >>>> ' ',' | sed -e 's/,$//' >>>> >>>> >>>> >>>> -e 's/^/"/' -e 's/$/"/' ; echo "") > >>>> >>>> >>>> >>>> cvt/hsfpcibasic2smart/COUNTRY_CODE_LIST >>>> >>>> >>>> >>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>> >>>> >>>> >>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>> >>>> >>>> >>>> inf/hsfpcibasic2hsfi.inf | ./cvtinf.pl cvt/hsfpcibasic2hsfi; if [ -n >>>> >>>> >>>> >>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2hsfi < >>>> >>>> >>>> >>>> "inf/hsf.cty"; else true; fi >>>> >>>> >>>> >>>> rm -rf cvt/hsfpcibasic2hsfi/Region >>>> >>>> >>>> >>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2hsfi/. >>>> >>>> >>>> >>>> (cd cvt/hsfpcibasic2hsfi/Region && grep -v -l '*' *NAME | sed -e >>>> >>>> >>>> >>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >>>> ' ',' | sed -e 's/,$//' >>>> >>>> >>>> >>>> -e 's/^/"/' -e 's/$/"/' ; echo "") > >>>> >>>> >>>> >>>> cvt/hsfpcibasic2hsfi/COUNTRY_CODE_LIST >>>> >>>> >>>> >>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>> >>>> >>>> >>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>> >>>> >>>> >>>> inf/hsfpcibasic2bry.inf | ./cvtinf.pl cvt/hsfpcibasic2bry; if [ -n >>>> >>>> >>>> >>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2bry < "inf/hsf.cty"; >>>> >>>> >>>> >>>> else true; fi >>>> >>>> >>>> >>>> rm -rf cvt/hsfpcibasic2bry/Region >>>> >>>> >>>> >>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2bry/. >>>> >>>> >>>> >>>> (cd cvt/hsfpcibasic2bry/Region && grep -v -l '*' *NAME | sed -e >>>> >>>> >>>> >>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >>>> ' ',' | sed -e 's/,$//' >>>> >>>> >>>> >>>> -e 's/^/"/' -e 's/$/"/' ; echo "") > >>>> >>>> >>>> >>>> cvt/hsfpcibasic2bry/COUNTRY_CODE_LIST >>>> >>>> >>>> >>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>> >>>> >>>> >>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>> >>>> >>>> >>>> inf/hsfpcibasic3.inf | ./cvtinf.pl cvt/hsfpcibasic3; if [ -n >>>> >>>> >>>> >>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic3 < "inf/hsf.cty"; >>>> >>>> >>>> >>>> else true; fi >>>> >>>> >>>> >>>> rm -rf cvt/hsfpcibasic3/Region >>>> >>>> >>>> >>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic3/. >>>> >>>> >>>> >>>> (cd cvt/hsfpcibasic3/Region && grep -v -l '*' *NAME | sed -e 's/^0//' >>>> >>>> >>>> >>>> -e 's/^0//' -e 's/_NAME$//' | tr ' >>>> ' ',' | sed -e 's/,$//' -e >>>> >>>> >>>> >>>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic3/COUNTRY_CODE_LIST >>>> >>>> >>>> >>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>> >>>> >>>> >>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>> >>>> >>>> >>>> inf/hsfmc97ich.inf | ./cvtinf.pl cvt/hsfmc97; if [ -n "" ]; then >>>> >>>> >>>> >>>> ./cvtinf.pl cvt/hsfmc97 < ""; else true; fi >>>> >>>> >>>> >>>> rm -f mc97/HW_ADAPTER_TYPE >>>> >>>> >>>> >>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfmc97/. >>>> >>>> >>>> >>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfmc97/. >>>> >>>> >>>> >>>> (cd cvt/hsfmc97/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e >>>> >>>> >>>> >>>> 's/^0//' -e 's/_NAME$//' | tr ' >>>> ' ',' | sed -e 's/,$//' -e 's/^/"/' >>>> >>>> >>>> >>>> -e 's/$/"/' ; echo "") > cvt/hsfmc97/COUNTRY_CODE_LIST >>>> >>>> >>>> >>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ali >>>> >>>> >>>> >>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ati >>>> >>>> >>>> >>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ich >>>> >>>> >>>> >>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97sis >>>> >>>> >>>> >>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97via >>>> >>>> >>>> >>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>> >>>> >>>> >>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>> >>>> >>>> >>>> inf/hsfcadmus2.inf | ./cvtinf.pl cvt/hsfcadmus2; if [ -n "" ]; then >>>> >>>> >>>> >>>> ./cvtinf.pl cvt/hsfcadmus2 < ""; else true; fi >>>> >>>> >>>> >>>> rm -f cadmus2/HW_ADAPTER_TYPE >>>> >>>> >>>> >>>> ln -sf ../hsfpcibasic2/Profile cvt/hsfcadmus2/. >>>> >>>> >>>> >>>> ln -sf ../hsfpcibasic2/Region cvt/hsfcadmus2/. >>>> >>>> >>>> >>>> (cd cvt/hsfcadmus2/Region && grep -v -l '*' *NAME | sed -e 's/^0//' >>>> >>>> >>>> >>>> -e 's/^0//' -e 's/_NAME$//' | tr ' >>>> ' ',' | sed -e 's/,$//' -e >>>> >>>> >>>> >>>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfcadmus2/COUNTRY_CODE_LIST >>>> >>>> >>>> >>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>> >>>> >>>> >>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>> >>>> >>>> >>>> inf/hsfcadmus2smart.inf | ./cvtinf.pl cvt/hsfcadmus2smart; if [ -n "" >>>> >>>> >>>> >>>> ]; then ./cvtinf.pl cvt/hsfcadmus2smart < ""; else true; fi >>>> >>>> >>>> >>>> rm -f cadmus2smart/HW_ADAPTER_TYPE >>>> >>>> >>>> >>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfcadmus2smart/. >>>> >>>> >>>> >>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfcadmus2smart/. >>>> >>>> >>>> >>>> (cd cvt/hsfcadmus2smart/Region && grep -v -l '*' *NAME | sed -e >>>> >>>> >>>> >>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >>>> ' ',' | sed -e 's/,$//' >>>> >>>> >>>> >>>> -e 's/^/"/' -e 's/$/"/' ; echo "") > >>>> >>>> >>>> >>>> cvt/hsfcadmus2smart/COUNTRY_CODE_LIST >>>> >>>> >>>> >>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>> >>>> >>>> >>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>> >>>> >>>> >>>> inf/hsfhda.inf | ./cvtinf.pl cvt/hsfhda; if [ -n "" ]; then >>>> >>>> >>>> >>>> ./cvtinf.pl cvt/hsfhda < ""; else true; fi >>>> >>>> >>>> >>>> rm -f hda/HW_ADAPTER_TYPE >>>> >>>> >>>> >>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfhda/. >>>> >>>> >>>> >>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfhda/. >>>> >>>> >>>> >>>> (cd cvt/hsfhda/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e >>>> >>>> >>>> >>>> 's/^0//' -e 's/_NAME$//' | tr ' >>>> ' ',' | sed -e 's/,$//' -e 's/^/"/' >>>> >>>> >>>> >>>> -e 's/$/"/' ; echo "") > cvt/hsfhda/COUNTRY_CODE_LIST >>>> >>>> >>>> >>>> cd cvt && find . -type f ! -empty -exec md5sum {} ';' | sort | >>>> >>>> >>>> >>>> while read sum file ; do >>>> >>>> >>>> >>>> if [ "$sum" = "$prevsum" ] && cmp -s "$file" "$prevfile"; then >>>> >>>> >>>> >>>> rm -f "$file"; >>>> >>>> >>>> >>>> if ! ln "$prevfile" "$file"; then >>>> >>>> >>>> >>>> echo 2>&1 "$0: ln FAILED - recreate $file based on >>>> $prevfile"; >>>> >>>> >>>> >>>> exit 1; >>>> >>>> >>>> >>>> fi; >>>> >>>> >>>> >>>> else >>>> >>>> >>>> >>>> prevsum="$sum"; >>>> >>>> >>>> >>>> prevfile="$file"; >>>> >>>> >>>> >>>> fi; >>>> >>>> >>>> >>>> done >>>> >>>> >>>> >>>> touch cvt/.linksame >>>> >>>> >>>> >>>> mkdir -m 755 -p /etc/hsfmodem/nvm >>>> >>>> >>>> >>>> cd cvt && (find hsfpcibasic2 hsfpcibasic2smart hsfpcibasic2hsfi >>>> >>>> >>>> >>>> hsfpcibasic2bry hsfpcibasic3 hsfmc97 hsfmc97ali hsfmc97ati >>>> >>>> >>>> >>>> hsfmc97ich hsfmc97sis hsfmc97via hsfcadmus2 hsfcadmus2smart >>>> >>>> >>>> >>>> hsfhda | cpio -pdmu /etc/hsfmodem/nvm) >>>> >>>> >>>> >>>> 127 blocks >>>> >>>> >>>> >>>> make[1]: Leaving directory >>>> >>>> >>>> >>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm' >>>> >>>> >>>> >>>> make[1]: Entering directory >>>> >>>> >>>> >>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts' >>>> >>>> >>>> >>>> sed >>>> >>>> >>>> >>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>> >>>> >>>> >>>> -e 's!@CNXTDRIVER@!hsf!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTTARGET@!hsf!g' >>>> >>>> >>>> >>>> -e 's!@CNXTARCH@!i386!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERDEV@!HSF!g' >>>> >>>> >>>> >>>> -e 's!@CNXTMAXMDM@!8!g' >>>> >>>> >>>> >>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>> >>>> >>>> >>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>> >>>> >>>> >>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUX_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>> >>>> >>>> >>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>> >>>> >>>> >>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>> >>>> >>>> >>>> -e >>>> >>>> >>>> >>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -e >>>> >>>> >>>> >>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>> >>>> >>>> >>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>> >>>> >>>> >>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>> >>>> >>>> >>>> < patcher.in > patcher >>>> >>>> >>>> >>>> chmod --reference=patcher.in patcher >>>> >>>> >>>> >>>> ln -s cnxtconfig.in hsfconfig.in >>>> >>>> >>>> >>>> sed >>>> >>>> >>>> >>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>> >>>> >>>> >>>> -e 's!@CNXTDRIVER@!hsf!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTTARGET@!hsf!g' >>>> >>>> >>>> >>>> -e 's!@CNXTARCH@!i386!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERDEV@!HSF!g' >>>> >>>> >>>> >>>> -e 's!@CNXTMAXMDM@!8!g' >>>> >>>> >>>> >>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>> >>>> >>>> >>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>> >>>> >>>> >>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUX_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>> >>>> >>>> >>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>> >>>> >>>> >>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>> >>>> >>>> >>>> -e >>>> >>>> >>>> >>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -e >>>> >>>> >>>> >>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>> >>>> >>>> >>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>> >>>> >>>> >>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>> >>>> >>>> >>>> < hsfconfig.in > hsfconfig >>>> >>>> >>>> >>>> chmod --reference=hsfconfig.in hsfconfig >>>> >>>> >>>> >>>> ln -s cnxtstop.in hsfstop.in >>>> >>>> >>>> >>>> sed >>>> >>>> >>>> >>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>> >>>> >>>> >>>> -e 's!@CNXTDRIVER@!hsf!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTTARGET@!hsf!g' >>>> >>>> >>>> >>>> -e 's!@CNXTARCH@!i386!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERDEV@!HSF!g' >>>> >>>> >>>> >>>> -e 's!@CNXTMAXMDM@!8!g' >>>> >>>> >>>> >>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>> >>>> >>>> >>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>> >>>> >>>> >>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUX_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>> >>>> >>>> >>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>> >>>> >>>> >>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>> >>>> >>>> >>>> -e >>>> >>>> >>>> >>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -e >>>> >>>> >>>> >>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>> >>>> >>>> >>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>> >>>> >>>> >>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>> >>>> >>>> >>>> < hsfstop.in > hsfstop >>>> >>>> >>>> >>>> chmod --reference=hsfstop.in hsfstop >>>> >>>> >>>> >>>> ln -s cnxtmodconflicts.in hsfmodconflicts.in >>>> >>>> >>>> >>>> sed >>>> >>>> >>>> >>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>> >>>> >>>> >>>> -e 's!@CNXTDRIVER@!hsf!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTTARGET@!hsf!g' >>>> >>>> >>>> >>>> -e 's!@CNXTARCH@!i386!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERDEV@!HSF!g' >>>> >>>> >>>> >>>> -e 's!@CNXTMAXMDM@!8!g' >>>> >>>> >>>> >>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>> >>>> >>>> >>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>> >>>> >>>> >>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUX_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>> >>>> >>>> >>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>> >>>> >>>> >>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>> >>>> >>>> >>>> -e >>>> >>>> >>>> >>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -e >>>> >>>> >>>> >>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>> >>>> >>>> >>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>> >>>> >>>> >>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>> >>>> >>>> >>>> < hsfmodconflicts.in > hsfmodconflicts >>>> >>>> >>>> >>>> chmod --reference=hsfmodconflicts.in hsfmodconflicts >>>> >>>> >>>> >>>> ln -s cnxtdcpd.in hsfdcpd.in >>>> >>>> >>>> >>>> sed >>>> >>>> >>>> >>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>> >>>> >>>> >>>> -e 's!@CNXTDRIVER@!hsf!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTTARGET@!hsf!g' >>>> >>>> >>>> >>>> -e 's!@CNXTARCH@!i386!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERDEV@!HSF!g' >>>> >>>> >>>> >>>> -e 's!@CNXTMAXMDM@!8!g' >>>> >>>> >>>> >>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>> >>>> >>>> >>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>> >>>> >>>> >>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUX_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>> >>>> >>>> >>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>> >>>> >>>> >>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>> >>>> >>>> >>>> -e >>>> >>>> >>>> >>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -e >>>> >>>> >>>> >>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>> >>>> >>>> >>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>> >>>> >>>> >>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>> >>>> >>>> >>>> < hsfdcpd.in > hsfdcpd >>>> >>>> >>>> >>>> chmod --reference=hsfdcpd.in hsfdcpd >>>> >>>> >>>> >>>> install -m 700 hsfconfig hsfstop hsfmodconflicts hsfdcpd /usr/sbin >>>> >>>> >>>> >>>> ln -s rccnxt.in rchsf.in >>>> >>>> >>>> >>>> sed >>>> >>>> >>>> >>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>> >>>> >>>> >>>> -e 's!@CNXTDRIVER@!hsf!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTTARGET@!hsf!g' >>>> >>>> >>>> >>>> -e 's!@CNXTARCH@!i386!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERDEV@!HSF!g' >>>> >>>> >>>> >>>> -e 's!@CNXTMAXMDM@!8!g' >>>> >>>> >>>> >>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>> >>>> >>>> >>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>> >>>> >>>> >>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>> >>>> >>>> >>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>> >>>> >>>> >>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUX_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>> >>>> >>>> >>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>> >>>> >>>> >>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>> >>>> >>>> >>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>> >>>> >>>> >>>> -e >>>> >>>> >>>> >>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -e >>>> >>>> >>>> >>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>> >>>> >>>> >>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>> >>>> >>>> >>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>> >>>> >>>> >>>> < rchsf.in > rchsf >>>> >>>> >>>> >>>> chmod --reference=rchsf.in rchsf >>>> >>>> >>>> >>>> mkdir -m 755 -p /usr/lib/hsfmodem >>>> >>>> >>>> >>>> install -m 700 rchsf /usr/lib/hsfmodem >>>> >>>> >>>> >>>> make[1]: Leaving directory >>>> >>>> >>>> >>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts' >>>> >>>> >>>> >>>> make[1]: Entering directory >>>> >>>> >>>> >>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules' >>>> >>>> >>>> >>>> rm -rf "/usr/lib/hsfmodem/config.mak" >>>> >>>> >>>> >>>> "/usr/lib/hsfmodem/modules/imported" "/usr/lib/hsfmodem/modules" >>>> >>>> >>>> >>>> mkdir -m 755 -p /usr/lib/hsfmodem/modules >>>> >>>> >>>> >>>> (cd .. && find config.mak modules/imported -depth -print | cpio -pdmu >>>> >>>> >>>> >>>> /usr/lib/hsfmodem) >>>> >>>> >>>> >>>> 5892 blocks >>>> >>>> >>>> >>>> find . ( -name COPYING -o -name '*.sh' -o -name '*.[ch]' -o -name >>>> >>>> >>>> >>>> '*.mak' -o -name '[Mm]akefile' ) -print | cpio -pdmu >>>> >>>> >>>> >>>> /usr/lib/hsfmodem/modules >>>> >>>> >>>> >>>> 3712 blocks >>>> >>>> >>>> >>>> find binaries -depth -print | cpio -pdmu /usr/lib/hsfmodem/modules >>>> >>>> >>>> >>>> 0 blocks >>>> >>>> >>>> >>>> make[1]: Leaving directory >>>> >>>> >>>> >>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules' >>>> >>>> >>>> >>>> make[1]: Entering directory >>>> >>>> >>>> >>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag' >>>> >>>> >>>> >>>> make[1]: Nothing to be done for `install'. >>>> >>>> >>>> >>>> make[1]: Leaving directory >>>> >>>> >>>> >>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag' >>>> >>>> >>>> >>>> mkdir -p /etc/hsfmodem/log >>>> >>>> >>>> >>>> install -m 444 LICENSE /usr/lib/hsfmodem >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> To complete the installation and configuration of your modem, >>>> >>>> >>>> >>>> please run "hsfconfig" (or "/usr/sbin/hsfconfig") >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Might it be with Ubuntu? I used generic package with >>>> >>>> >>>> >>>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ uname -a >>>> >>>> >>>> >>>> Linux acer-aspire-1 2.6.40-4.fc15.i686 #1 SMP Fri Jul 29 18:54:39 UTC >>>> >>>> >>>> >>>> 2011 i686 i686 i386 GNU/Linux >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Maybe Marv can test to find out what could be wrong? >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Regards, >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Antonio >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> On Thu, Aug 25, 2011 at 8:02 PM, Antonio Olivares >>>> >>>> >>>> >>>> <olivares14031@xxxxxxxxx> wrote: >>>> >>>> >>>> >>> >>>>> Jeffrey, >>> >>>> >>>> >>>> >>> >>>>> >>> >>>> >>>> >>>> >>> >>>>> In the case you provided, you installed/tried to install the >>> >>>> >>>> >>>> >>> >>>>> alsa-linuxant package? >>> >>>> >>>> >>>> >>> >>>>> >>> >>>> >>>> >>>> >>> >>>>> You may not have needed this package. >>> >>>> >>>> >>>> >>> >>>>> >>> >>>> >>>> >>>> >>> >>>>> You do have kernel sources and compiler ready. However, the >>> >>>> >>>> >>>> >>> >>>>> replacements on the hsfmodem would differ with the ones suggested by >>> >>>> >>>> >>>> >>> >>>>> Jonathan(Linuxant support), DECLARE_MUTEX, with DEFINE_SEMAPHORE after >>> >>>> >>>> >>>> >>> >>>>> you have detected where it bombs out or wait a bit till they(Linuxant) >>> >>>> >>>> >>>> >>> >>>>> patch up the code and make it ready to work. >>> >>>> >>>> >>>> >>> >>>>> >>> >>>> >>>> >>>> >>> >>>>> If someone has suggestions, please forward them to Jeffrey. >>> >>>> >>>> >>>> >>> >>>>> >>> >>>> >>>> >>>> >>> >>>>> Regards, >>> >>>> >>>> >>>> >>> >>>>> >>> >>>> >>>> >>>> >>> >>>>> Antonio >>> >>>> >>>> >>>> >>> >>>>> >>> >>>> >>>> >>>> >>> >>>>> >>> >>>> >>>> >>>> >>> >>>>> On Thu, Aug 25, 2011 at 5:15 PM, <cohanjeffrey@xxxxxxx> wrote: >>> >>>> >>>> >>>> >>> >>>>>> Great to hear from you Antonio. I'm working only with the Sony 32-bit >>>>>> VAIO >>> >>>> >>>> >>>> >>> >>>>>> VGN-N130G and will attach ModemData.txt again. >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> 1) I did this BUT substituted /hsfmodem/ for /hcfpcimodem/ and wvdial >>>>>> does >>> >>>> >>>> >>>> >>> >>>>>> not find a modem: >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >>> >>>> >>>> >>>> >>> >>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c >>> >>>> >>>> >>>> >>> >>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >>> >>>> >>>> >>>> >>> >>>>>> replace .ioctl with .compat_ioctl in: >>> >>>> >>>> >>>> >>> >>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> 2) ERRORS: Both alsa-driver-linuxant and hfsmodem packages install >>>>>> with >>> >>>> >>>> >>>> >>> >>>>>> errors, even when I remove them and re-install. Here are excerpts: >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> alsa-driver-linuxant_1.0.23.1_all.deb: >>> >>>> >>>> >>>> >>> >>>>>> ----in terminal: >>> >>>> >>>> >>>> >>> >>>>>> Building modules for the 2.6.38-11-generic kernel, please wait... >>>>>> done. >>> >>>> >>>> >>>> >>> >>>>>> ERROR: Build failed. Please review the build log at >>> >>>> >>>> >>>> >>> >>>>>> /tmp/alsa-driver-linuxant.26528.log >>> >>>> >>>> >>>> >>> >>>>>> dpkg: error processing alsa-driver-linuxant (--install): >>> >>>> >>>> >>>> >>> >>>>>> subprocess installed post-installation script returned error exit >>>>>> status >>>>>> 2 >>> >>>> >>>> >>>> >>> >>>>>> ----in log file: >>> >>>> >>>> >>>> >>> >>>>>> checking for GCC version... Kernel compiler: Used compiler: gcc >>> >>>> >>>> >>>> >>> >>>>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 >>> >>>> >>>> >>>> >>> >>>>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED >>> >>>> >>>> >>>> >>> >>>>>> *** Assuming the same compiler is used with the current system >>>>>> compiler. >>> >>>> >>>> >>>> >>> >>>>>> *** Please make sure that the same compiler version was used for >>>>>> building >>> >>>> >>>> >>>> >>> >>>>>> kernel. >>> >>>> >>>> >>>> >>> >>>>>> and later... >>> >>>> >>>> >>>> >>> >>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function >>> >>>> >>>> >>>> >>> >>>>>> ‘snd_pcm_hw_params’: >>> >>>> >>>> >>>> >>> >>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: >>>>>> implicit >>> >>>> >>>> >>>> >>> >>>>>> declaration of function ‘pm_qos_remove_requirement’ >>> >>>> >>>> >>>> >>> >>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error: >>>>>> implicit >>> >>>> >>>> >>>> >>> >>>>>> declaration of function ‘pm_qos_add_requirement’ >>> >>>> >>>> >>>> >>> >>>>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error >>>>>> 1 >>> >>>> >>>> >>>> >>> >>>>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2 >>> >>>> >>>> >>>> >>> >>>>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2 >>> >>>> >>>> >>>> >>> >>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' >>> >>>> >>>> >>>> >>> >>>>>> make: *** [compile] Error 2 >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> hsfmodem_7.80.02.06full_i386.deb: >>> >>>> >>>> >>>> >>> >>>>>> /usr/lib/hsfmodem/modules/osservices.c:1396:1: warning: the frame size >>>>>> of >>> >>>> >>>> >>>> >>> >>>>>> 1028 bytes is larger than 1024 bytes >>> >>>> >>>> >>>> >>> >>>>>> CC [M] /usr/lib/hsfmodem/modules/osstdio.o >>> >>>> >>>> >>>> >>> >>>>>> CC [M] /usr/lib/hsfmodem/modules/osnvm.o >>> >>>> >>>> >>>> >>> >>>>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared >>>>>> here >>>>>> (not >>> >>>> >>>> >>>> >>> >>>>>> in a function) >>> >>>> >>>> >>>> >>> >>>>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1 >>> >>>> >>>> >>>> >>> >>>>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2 >>> >>>> >>>> >>>> >>> >>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' >>> >>>> >>>> >>>> >>> >>>>>> make: *** [all] Error 2 >>> >>>> >>>> >>>> >>> >>>>>> ----I have the long hsfdiag.txt file from "hsfconfig --dumpdiag" and >>>>>> the >>> >>>> >>>> >>>> >>> >>>>>> buildlog files >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> 3) $ uname -a (Jonathan had asked someone for this) gets: >>> >>>> >>>> >>>> >>> >>>>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri >>>>>> Jul >>>>>> 29 >>> >>>> >>>> >>>> >>> >>>>>> 19:05:14 UTC 2011 i68 >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> 4) I had the modem working perfectly in Ubuntu 9.04, but don't >>>>>> remember >>>>>> how >>> >>>> >>>> >>>> >>> >>>>>> I did it. Is it possible that it CAN'T be done in 11.04?! >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> I'm not sure if any of this will be of use to you, but am particularly >>> >>>> >>>> >>>> >>> >>>>>> interested in 4); and is it correct to substitute hsfmodem in 1)? Is >>>>>> 2) >>>>>> an >>> >>>> >>>> >>>> >>> >>>>>> issue? Also would it have been important to reboot at certain points? >>>>>> Should >>> >>>> >>>> >>>> >>> >>>>>> I install a new modem in either beast? I so depend on dial-up! Many >>>>>> thanks! >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> Jeffrey >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> -----Original Message----- >>> >>>> >>>> >>>> >>> >>>>>> From: Antonio Olivares <olivares14031@xxxxxxxxx> >>> >>>> >>>> >>>> >>> >>>>>> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx> >>> >>>> >>>> >>>> >>> >>>>>> Cc: discuss@xxxxxxxxxxxxx >>> >>>> >>>> >>>> >>> >>>>>> Sent: Wed, Aug 24, 2011 7:17 pm >>> >>>> >>>> >>>> >>> >>>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> Jeffrey, >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> In the x86_64 bit machine, if you had 32 bit linux installed, it would >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> be a nice opportunity for you to check the modified driver *to see if >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> it would work*, but since it is 64 bit you get the message directly >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> from ModemData.txt >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> There is no agrsm software support for x86_64 systems, through the >>>>>> modem >>>>>> may >>> >>>> >>>> >>>> >>> >>>>>> be >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> supported on Intel/i386 installations, which do more slowly servce >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> x86_64 processors. >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> * driver >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-11c11040_20110811_i386.deb >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> + new agrsm tools >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> For the other modem, Jonathan at Linuxant has posted ways to >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> circumvent the errors: >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> http://linmodems.org/cgi-bin/ezmlm-cgi?1:sss:37710:201108:dpmgnpddbcjlkfmlpmin#b >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> <quote> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> Hi, >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> this is a known build issue with recent kernels, even with the latest >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> release of the driver. A used provided the following workaround to >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> solve it: >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> --- >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> replace .ioctl with .compat_ioctl in: >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> --- >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> This build problem will be fixed in a future release of the driver. >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> Regards, >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> Jonathan >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> Technical specialist / Linuxant >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> www.linuxant.com >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> support@xxxxxxxxxxxx >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> </quote> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> So you may try the fixes suggested by Jonathan in the meantime. Or >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> you have the option to try the driver 11c11040 but on 32 bit linux. >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> Hopefully you can get one of these modems to work. >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> Regards, >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> Antonio >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> On Wed, Aug 24, 2011 at 8:56 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> >>>>>> wrote: >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> I have spent many many hours trying to get dial-up working on two >>>>>>> laptops >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> and would so appreciate your help. Dial-up on either one would be >>>>>>> just >>> >>>> >>>> >>>> >>> >>>>>>> fine. >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> I'm assuming it will be impossible on the HP laptop (64-bit) as I >>>>>>> found >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> this: >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> "Current support for the 11c11040 modem does NOT exist on a non-x86 >>>>>>> system >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> (e.g. AMD, or x86_64.) This is because there is a proprietary core in >>>>>>> the >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> code compiled for x86 systems." >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> On the VAIO (32-bit) it worked perfectly in an earlier version of >>>>>>> Ubuntu >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> before upgrading. >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> I can't seem to find an appropriate driver at www.linuxant.com for my >>> >>>> >>>> >>>> >>> >>>>>>> Linux >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> version 2.6.38-11-generic. >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> Alsa-driver-linuxant doesn't seem to be properly installed. >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> I get this error message: >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> ERROR: Module build failed! >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> Please examine the log file >>> >>>> >>>> >>>> >>> >>>>>>> "/etc/hsfmodem/log/buildlog-20110824182445.txt" >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> to determine why. >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> dpkg: error processing alsa-driver-linuxant (--configure): >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> subprocess installed post-installation script returned error exit >>>>>>> status >>> >>>> >>>> >>>> >>> >>>>>>> 2 >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> Errors were encountered while processing: >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> alsa-driver-linuxant >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> E: Sub-process /usr/bin/dpkg returned an error code (1) >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> =============== >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> Thanks much! >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> Jeff >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>>> >>> >>>> >>>> >>>> >>> >>>>> >>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >> >
