Re: Aswat, Malaysia kernel 2.6.35-22-generic

Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> · Tue, 25 Jan 2011 19:04:24 -0500

Nuzzul

It  will be easiest if you install packages in the order:
dkms
sl-modem-source
sl-modem-daemon

The last has  scripts which activate thee modem upon bootup.

Then the modem should be detected by:
# sudo wvdialconf

MarvS
scanModem maintainer

On Tue, Jan 25, 2011 at 6:37 PM, Antonio Olivares
<olivares14031@xxxxxxxxx> wrote:
> Nuzzul,
>
> scanModem has detected that your modem is supported through slamr Â+
> ungrab-winmodem
>
>
> Predictive Âdiagnostics for card in bus 01:09.0:
> Â Â Â Modem chipset Âdetected on
> NAME="Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem "
> CLASS=0703
> PCIDEV=163c:3052
> SUBSYS=163c:3052
> IRQ=17
> IDENT=slamr
>
> ÂFor candidate modem in: Â01:09.0
> Â0703 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem
> Â Â Primary device ID: Â163c:3052
> ÂSupport type needed or chipset: Â Â Â Âslamr
>
>
>
> There is a package sl-modem-source providing a source code the modem driver Â,
> If can be searched for at http://pacakges.ubuntu.com. ÂAfter
> downloading install under Linux with:
> Â$ sudo dpkg -i sl*.deb
> If DKMS support installed, driver updates with kernel updates will be
> automatically done.
>
> The modem is supported by the Smartlink
> plus the slmodemd helper utility. ÂRead the
> DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
>
> Download the package
> http://packages.ubuntu.com/maverick/sl-modem-source
>
> and install with
> Â$ sudo dpkg -i sl*.deb
>
> If you can install dkms package
>
> Presently install your Linux Distributions dkms package. It provides
> for automated driver updates,
> following upgrade of your kernel. ÂFor details see
> http://linux.dell.com/projects.shtml#dkms
>
> Regards,
>
> Antonio
>
>
> On Tue, Jan 25, 2011 at 2:14 PM, Nuzzul Aswat <nuzzul82@xxxxxxxxx> wrote:
>> ÂOnly plain text email is forwarded by the ÂDiscuss@xxxxxxxxxxxxx List Server,
>> Âas HTML can contain viruses. Use as the email Subject Line:
>> Â Â Â Â Â YourName, YourCountry Âkernel 2.6.35-22-generic
>> ÂWith this Subject Line cogent experts will be alerted, and useful
>> case names left in the Archive.
>> ÂYourCountry will enable Country specific guidance. Linux experts in
>> YourCountry
>> Âcan be found through: http://www.linux.org/groups/index.html.
>> They will know your Country's modem code, which may be essential for
>> dialup service.
>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
>> Internet Provider mail filters.
>> ÂSo in a day, also check the Archived responses at http://www.linmodems.org
>> -------------------------- ÂSystem information ----------------------------
>> CPU=i686, ÂUbuntu , ÂALSA_version=1.0.23
>> Linux version 2.6.35-22-generic (buildd@rothera) (gcc version 4.4.5
>> (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:34:50
>> UTC 2010
>> ÂscanModem update of: Â2010_12_12
>>
>> Distrib_ID=Ubuntu
>> DistribCodeName=maverick
>> AptRepositoryStem=http://ftp.twaren.net/Linux/Ubuntu/ubuntu/
>>
>>
>> Presently install your Linux Distributions dkms package. It provides
>> for automated driver updates,
>> following upgrade of your kernel. ÂFor details see
>> http://linux.dell.com/projects.shtml#dkms
>>
>> ÂThere are no blacklisted modem drivers in /etc/modprobe* Âfiles
>>
>> ÂPotentially useful modem drivers now loaded are:
>>
>>
>> Attached USB devices are:
>> ÂID 1c4f:0003 SiGma Micro HID controller
>> ÂID 1c4f:0002 SiGma Micro
>> ÂID 046d:092f Logitech, Inc. QuickCam Express Plus
>> If a cellphone is not detected, see
>> http://ubuntuforums.org/archive/index.php/t-878554.html
>> A sample report is:
>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>>
>> If a USB modem or cellphone is attached and was not detected, please
>> provide available information in your request to discuss@xxxxxxxxxxxxx
>>
>> Candidate PCI devices with modem chips are:
>> 01:09.0 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem (rev 04)
>> High Definition Audio cards can host modem chips.
>>
>> For candidate card in slot 01:09.0, firmware information and bootup
>> diagnostics are:
>> ÂPCI slot Â Â Â PCI ID Â Â Â Â ÂSubsystemID Â Â Name
>> Â---------- Â Â --------- Â Â Â --------- Â Â Â --------------
>> Â01:09.0 Â Â Â Â163c:3052 Â Â Â 163c:3052 Â Â Â Modem: Smart Link Ltd. SmartLink
>> SmartPCI562 56K Modem
>>
>> ÂModem interrupt assignment and sharing:
>> Â17: Â Â Â Â186 Â IO-APIC-fasteoi Â Intel ICH6, serial
>> Â--- Bootup diagnostics for card in PCI slot 01:09.0 ----
>> [ Â Â0.104798] pci 0000:01:09.0: reg 10: [mem 0xfddfe000-0xfddfefff]
>> [ Â Â0.104809] pci 0000:01:09.0: reg 14: [io Â0xdc00-0xdcff]
>> [ Â Â0.104871] pci 0000:01:09.0: PME# supported from D0 D3hot D3cold
>> [ Â Â0.104878] pci 0000:01:09.0: PME# disabled
>> [ Â Â0.121589] pci 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>> [ Â Â0.245366] serial 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>> [ Â Â0.245539] 0000:01:09.0: ttyS0 at I/O 0xdc08 (irq = 17) is a 16450
>> [ Â Â0.245654] 0000:01:09.0: ttyS2 at I/O 0xdc10 (irq = 17) is a 8250
>> [ Â Â0.245768] 0000:01:09.0: ttyS3 at I/O 0xdc18 (irq = 17) is a 16450
>> [ Â Â0.245812] Couldn't register serial port 0000:01:09.0: -28
>>
>> ÂThe PCI slot 01:09.0 of the modem card may be disabled early in
>> Âa bootup process, Âbut then enabled later. If modem drivers load
>> Âbut the Âmodem is not responsive, read DOCs/Bootup.txt about possible fixes.
>> ÂSend dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>> Âif help is needed.
>>
>>
>> === Finished firmware and bootup diagnostics, next deducing cogent software. ===
>>
>> Predictive Âdiagnostics for card in bus 01:09.0:
>> Â Â Â ÂModem chipset Âdetected on
>> NAME="Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem "
>> CLASS=0703
>> PCIDEV=163c:3052
>> SUBSYS=163c:3052
>> IRQ=17
>> IDENT=slamr
>>
>> ÂFor candidate modem in: Â01:09.0
>> Â 0703 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem
>> Â Â ÂPrimary device ID: Â163c:3052
>> ÂSupport type needed or chipset: Â Â Â Âslamr
>>
>>
>>
>> There is a package sl-modem-source providing a source code the modem driver Â,
>> If can be searched for at http://pacakge.ubuntu.com. ÂAfter
>> downloading install under Linux with:
>> Â$ sudo dpkg -i sl*.deb
>> If DKMS support installed, driver updates with kernel updates will be
>> automatically done.
>>
>> The modem is supported by the Smartlink
>> plus the slmodemd helper utility. ÂRead the
>> DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
>>
>>
>> For 2.6.35-22-generic compiling drivers is necessary. As of October
>> 2007 the current packages at
>> http://linmodems.technion.ac.il/packages/smartlink/ Âare the
>> ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
>>
>> Writing DOCs/Smartlink.txt
>> ============ end Smartlink section =====================
>>
>> ÂCompleted candidate modem analyses.
>>
>> ÂThe base of the UDEV device file system is: /dev/.udev
>>
>> ÂVersions adequately match for the compiler installed: 4.4.5
>> Â Â Â Â Â Â and the compiler used in kernel assembly: 4.4.5
>>
>> Âlinux-headers-2.6.35-22-generic resources needed for compiling are
>> not manifestly ready!
>>
>> ÂIf compiling is necessary packages must be installed, providing:
>> Â Â Â Â linux-headers-2.6.35-22-generic
>>
>>
>> If a driver compilation fails, with message including some lack of
>> some FileName.h (stdio.h for example), then
>> Some additional kernel-header files need installation to /usr/include.
>> The minimal additional packages are libc6-dev
>> and any of its dependents, under Ubuntu linux-libc-dev
>>
>> If an alternate ethernet connection is available,
>> $ Âapt-get update
>> $ Âapt-get -s install linux-kernel-devel
>> will install needed packages.
>> For Debian/Ubuntu related distributions, run the following command to
>> display the needed package list:
>>
>> Otherwise packages have to be found through http://packages.ubuntu.com
>> Once downloaded and transferred into a Linux partition,
>> they can be installed alltogether with:
>> $ sudo dpkg -i *.deb
>>
>>
>> Checking pppd properties:
>> Â Â Â Â-rwsr-xr-- 1 root dip 273248 2010-07-10 00:41 /usr/sbin/pppd
>>
>> In case of an "error 17" "serial loopback" problem, see:
>> Â Âhttp://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>>
>> To enable dialout without Root permission do:
>> Â Â Â Â$ su - root Â(not for Ubuntu)
>> Â Â Â Âsudo chmod a+x /usr/sbin/pppd
>> or under Ubuntu related Linuxes
>> Â Â Â Âsudo chmod a+x /usr/sbin/pppd
>>
>> Checking settings of: Â /etc/ppp/options
>> asyncmap 0
>> noauth
>> crtscts
>> lock
>> hide-password
>> modem
>> proxyarp
>> lcp-echo-interval 30
>> lcp-echo-failure 4
>> noipx
>>
>> In case of a message like:
>> Â Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>>
>> For guidance on FAX usage, get from
>> http://linmodems.technion.ac.il/packages/ Âget faxing.tar.gz
>> It has samples for a modem using port /dev/ttySL0, which must be
>> changed to match your modem's port.
>>
>>
>> ÂDon't worry about the following, it is for experts should trouble
>> shooting be necessary.
>> ==========================================================
>>
>> ÂChecking for modem support lines:
>> Â--------------------------------------
>> Â Â /device/modem symbolic link:
>> slmodemd created symbolic link /dev/ttySL0:
>> Â Â Within /etc/udev/ files:
>>
>> Â Â Within /etc/modprobe.conf files:
>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
>> order to blacklist unwanted modem drivers
>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
>> Â Â Within any ancient /etc/devfs files:
>>
>> Â Â Within ancient kernel 2.4.n /etc/module.conf files:
>>
>> --------- end modem support lines --------
>>
>> Â Â Â Â Â CPU0
>> Â0: Â Â Â Â 47 Â IO-APIC-edge Â Â Âtimer
>> Â1: Â Â Â Â Â2 Â IO-APIC-edge Â Â Âi8042
>> Â7: Â Â Â Â Â0 Â IO-APIC-edge Â Â Âparport0
>> Â8: Â Â Â Â Â1 Â IO-APIC-edge Â Â Ârtc0
>> Â9: Â Â Â Â Â0 Â IO-APIC-fasteoi Â acpi
>> Â14: Â Â Â 5284 Â IO-APIC-edge Â Â Âata_piix
>> Â15: Â Â Â Â470 Â IO-APIC-edge Â Â Âata_piix
>> Â16: Â Â Â Â304 Â IO-APIC-fasteoi Â uhci_hcd:usb5, i915
>> Â17: Â Â Â Â186 Â IO-APIC-fasteoi Â Intel ICH6, serial
>> Â18: Â Â Â Â893 Â IO-APIC-fasteoi Â uhci_hcd:usb4
>> Â19: Â Â Â Â Â0 Â IO-APIC-fasteoi Â uhci_hcd:usb3
>> Â23: Â Â Â Â 95 Â IO-APIC-fasteoi Â ehci_hcd:usb1, uhci_hcd:usb2
>> NMI: Â Â Â Â Â0 Â Non-maskable interrupts
>> LOC: Â Â Â12334 Â Local timer interrupts
>> SPU: Â Â Â Â Â0 Â Spurious interrupts
>> PMI: Â Â Â Â Â0 Â Performance monitoring interrupts
>> PND: Â Â Â Â Â0 Â Performance pending work
>> RES: Â Â Â Â Â0 Â Rescheduling interrupts
>> CAL: Â Â Â Â Â0 Â Function call interrupts
>> TLB: Â Â Â Â Â0 Â TLB shootdowns
>> TRM: Â Â Â Â Â0 Â Thermal event interrupts
>> THR: Â Â Â Â Â0 Â Threshold APIC interrupts
>> MCE: Â Â Â Â Â0 Â Machine check exceptions
>> MCP: Â Â Â Â Â1 Â Machine check polls
>> ERR: Â Â Â Â Â0
>> MIS: Â Â Â Â Â0
>>
>> [ Â Â0.000000] Initializing cgroup subsys cpuset
>> [ Â Â0.000000] Initializing cgroup subsys cpu
>> [ Â Â0.000000] Linux version 2.6.35-22-generic (buildd@rothera) (gcc
>> version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep
>> 19 20:34:50 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4)
>> [ Â Â0.000000] BIOS-provided physical RAM map:
>> [ Â Â0.000000] ÂBIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
>> [ Â Â0.000000] ÂBIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
>> [ Â Â0.000000] ÂBIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>> [ Â Â0.000000] ÂBIOS-e820: 0000000000100000 - 000000001f7f0000 (usable)
>> [ Â Â0.000000] ÂBIOS-e820: 000000001f7f0000 - 000000001f7f3000 (ACPI NVS)
>> [ Â Â0.000000] ÂBIOS-e820: 000000001f7f3000 - 000000001f800000 (ACPI data)
>> [ Â Â0.000000] ÂBIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>> [ Â Â0.000000] ÂBIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>> [ Â Â0.000000] NX (Execute Disable) protection: approximated by x86
>> segment limits
>> [ Â Â0.000000] DMI not present or invalid.
>> [ Â Â0.000000] e820 update range: 0000000000000000 - 0000000000001000
>> (usable) ==> (reserved)
>> [ Â Â0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>> [ Â Â0.000000] last_pfn = 0x1f7f0 max_arch_pfn = 0x100000
>> [ Â Â0.000000] MTRR default type: uncachable
>> [ Â Â0.000000] MTRR fixed ranges enabled:
>> [ Â Â0.000000] Â 00000-9FFFF write-back
>> [ Â Â0.000000] Â A0000-EFFFF uncachable
>> [ Â Â0.000000] Â F0000-FFFFF write-through
>> [ Â Â0.000000] MTRR variable ranges enabled:
>> [ Â Â0.000000] Â 0 base 000000000 mask FE0000000 write-back
>> [ Â Â0.000000] Â 1 base 01F800000 mask FFF800000 uncachable
>> [ Â Â0.000000] Â 2 disabled
>> [ Â Â0.000000] Â 3 disabled
>> [ Â Â0.000000] Â 4 disabled
>> [ Â Â0.000000] Â 5 disabled
>> [ Â Â0.000000] Â 6 disabled
>> [ Â Â0.000000] Â 7 disabled
>> [ Â Â0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>> [ Â Â0.000000] e820 update range: 0000000000002000 - 0000000000010000
>> (usable) ==> (reserved)
>> [ Â Â0.000000] Scanning 1 areas for low memory corruption
>> [ Â Â0.000000] modified physical RAM map:
>> [ Â Â0.000000] Âmodified: 0000000000000000 - 0000000000001000 (reserved)
>> [ Â Â0.000000] Âmodified: 0000000000001000 - 0000000000002000 (usable)
>> [ Â Â0.000000] Âmodified: 0000000000002000 - 0000000000010000 (reserved)
>> [ Â Â0.000000] Âmodified: 0000000000010000 - 0000000000097c00 (usable)
>> [ Â Â0.000000] Âmodified: 0000000000097c00 - 00000000000a0000 (reserved)
>> [ Â Â0.000000] Âmodified: 00000000000f0000 - 0000000000100000 (reserved)
>> [ Â Â0.000000] Âmodified: 0000000000100000 - 000000001f7f0000 (usable)
>> [ Â Â0.000000] Âmodified: 000000001f7f0000 - 000000001f7f3000 (ACPI NVS)
>> [ Â Â0.000000] Âmodified: 000000001f7f3000 - 000000001f800000 (ACPI data)
>> [ Â Â0.000000] Âmodified: 00000000e0000000 - 00000000f0000000 (reserved)
>> [ Â Â0.000000] Âmodified: 00000000fec00000 - 0000000100000000 (reserved)
>> [ Â Â0.000000] initial memory mapped : 0 - 00c00000
>> [ Â Â0.000000] found SMP MP-table at [c00f4870] f4870
>> [ Â Â0.000000] init_memory_mapping: 0000000000000000-000000001f7f0000
>> [ Â Â0.000000] Â0000000000 - 0000400000 page 4k
>> [ Â Â0.000000] Â0000400000 - 001f400000 page 2M
>> [ Â Â0.000000] Â001f400000 - 001f7f0000 page 4k
>> [ Â Â0.000000] kernel direct mapping tables up to 1f7f0000 @ 15000-1a000
>> [ Â Â0.000000] RAMDISK: 16ff1000 - 17a34000
>> [ Â Â0.000000] ACPI: RSDP 000f8950 00014 (v00 IntelR)
>> [ Â Â0.000000] ACPI: RSDT 1f7f3040 00030 (v01 IntelR AWRDACPI 42302E31
>> AWRD 00000000)
>> [ Â Â0.000000] ACPI: FACP 1f7f30c0 00074 (v01 IntelR AWRDACPI 42302E31
>> AWRD 00000000)
>> [ Â Â0.000000] ACPI: DSDT 1f7f3180 03F71 (v01 INTELR AWRDACPI 00001000
>> MSFT 03000000)
>> [ Â Â0.000000] ACPI: FACS 1f7f0000 00040
>> [ Â Â0.000000] ACPI: MCFG 1f7f7200 0003C (v01 IntelR AWRDACPI 42302E31
>> AWRD 00000000)
>> [ Â Â0.000000] ACPI: APIC 1f7f7140 00068 (v01 IntelR AWRDACPI 42302E31
>> AWRD 00000000)
>> [ Â Â0.000000] ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
>> [ Â Â0.000000] ACPI: acpi=force override
>> [ Â Â0.000000] ACPI: Local APIC address 0xfee00000
>> [ Â Â0.000000] 0MB HIGHMEM available.
>> [ Â Â0.000000] 503MB LOWMEM available.
>> [ Â Â0.000000] Â mapped low ram: 0 - 1f7f0000
>> [ Â Â0.000000] Â low ram: 0 - 1f7f0000
>> [ Â Â0.000000] Zone PFN ranges:
>> [ Â Â0.000000] Â DMA Â Â Â0x00000001 -> 0x00001000
>> [ Â Â0.000000] Â Normal Â 0x00001000 -> 0x0001f7f0
>> [ Â Â0.000000] Â HighMem Âempty
>> [ Â Â0.000000] Movable zone start PFN for each node
>> [ Â Â0.000000] early_node_map[3] active PFN ranges
>> [ Â Â0.000000] Â Â 0: 0x00000001 -> 0x00000002
>> [ Â Â0.000000] Â Â 0: 0x00000010 -> 0x00000097
>> [ Â Â0.000000] Â Â 0: 0x00000100 -> 0x0001f7f0
>> [ Â Â0.000000] On node 0 totalpages: 128888
>> [ Â Â0.000000] free_area_init_node: node 0, pgdat c07ffd40,
>> node_mem_map c1001020
>> [ Â Â0.000000] Â DMA zone: 32 pages used for memmap
>> [ Â Â0.000000] Â DMA zone: 0 pages reserved
>> [ Â Â0.000000] Â DMA zone: 3944 pages, LIFO batch:0
>> [ Â Â0.000000] Â Normal zone: 976 pages used for memmap
>> [ Â Â0.000000] Â Normal zone: 123936 pages, LIFO batch:31
>> [ Â Â0.000000] Using APIC driver default
>> [ Â Â0.000000] ACPI: PM-Timer IO Port: 0x408
>> [ Â Â0.000000] ACPI: Local APIC address 0xfee00000
>> [ Â Â0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> [ Â Â0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>> [ Â Â0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>> [ Â Â0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>> [ Â Â0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>> [ Â Â0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>> [ Â Â0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [ Â Â0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> [ Â Â0.000000] ACPI: IRQ0 used by override.
>> [ Â Â0.000000] ACPI: IRQ2 used by override.
>> [ Â Â0.000000] ACPI: IRQ9 used by override.
>> [ Â Â0.000000] Using ACPI (MADT) for SMP configuration information
>> [ Â Â0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
>> [ Â Â0.000000] nr_irqs_gsi: 40
>> [ Â Â0.000000] early_res array is doubled to 64 at [16000 - 167ff]
>> [ Â Â0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
>> [ Â Â0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000
>> [ Â Â0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
>> [ Â Â0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>> [ Â Â0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>> [ Â Â0.000000] Allocating PCI resources starting at 1f800000 (gap:
>> 1f800000:c0800000)
>> [ Â Â0.000000] Booting paravirtualized kernel on bare hardware
>> [ Â Â0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2
>> nr_node_ids:1
>> [ Â Â0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36416 r0 d20928 u2097152
>> [ Â Â0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
>> [ Â Â0.000000] pcpu-alloc: [0] 0 1
>> [ Â Â0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>> Total pages: 127880
>> [ Â Â0.000000] Kernel command line:
>> BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic
>> root=UUID=b8329912-98de-45bd-8670-4381216c7135 ro quiet splash
>> acpi=force pci=routeirq
>> [ Â Â0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
>> [ Â Â0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>> [ Â Â0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>> [ Â Â0.000000] Enabling fast FPU save and restore... done.
>> [ Â Â0.000000] Enabling unmasked SIMD FPU exception support... done.
>> [ Â Â0.000000] Initializing CPU#0
>> [ Â Â0.000000] allocated 2580140 bytes of page_cgroup
>> [ Â Â0.000000] please try 'cgroup_disable=memory' option if you don't
>> want memory cgroups
>> [ Â Â0.000000] Subtract (45 early reservations)
>> [ Â Â0.000000] Â #1 [0000001000 - 0000002000] Â EX TRAMPOLINE
>> [ Â Â0.000000] Â #2 [0000100000 - 00009a0adc] Â TEXT DATA BSS
>> [ Â Â0.000000] Â #3 [0016ff1000 - 0017a34000] Â Â Â Â RAMDISK
>> [ Â Â0.000000] Â #4 [00009a1000 - 00009a4000] Â Â Â Â Â Â BRK
>> [ Â Â0.000000] Â #5 [00000f4880 - 0000100000] Â BIOS reserved
>> [ Â Â0.000000] Â #6 [00000f4870 - 00000f4880] Â ÂMP-table mpf
>> [ Â Â0.000000] Â #7 [0000097c00 - 00000f0c00] Â BIOS reserved
>> [ Â Â0.000000] Â #8 [00000f0d28 - 00000f4870] Â BIOS reserved
>> [ Â Â0.000000] Â #9 [00000f0c00 - 00000f0d28] Â ÂMP-table mpc
>> [ Â Â0.000000] Â #10 [0000010000 - 0000011000] Â Â ÂTRAMPOLINE
>> [ Â Â0.000000] Â #11 [0000011000 - 0000015000] Â Â ACPI WAKEUP
>> [ Â Â0.000000] Â #12 [0000015000 - 0000016000] Â Â Â Â PGTABLE
>> [ Â Â0.000000] Â #13 [0001000000 - 0001001000] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #14 [0001001000 - 00013f1000] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #15 [00013f1000 - 00013f1004] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #16 [00013f1040 - 00013f1100] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #17 [00013f1100 - 00013f1130] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #18 [00013f1140 - 00013f2940] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #19 [00013f2940 - 00013f2967] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #20 [00013f2980 - 00013f2ab4] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #21 [00013f2ac0 - 00013f2b00] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #22 [00013f2b00 - 00013f2b40] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #23 [00013f2b40 - 00013f2b80] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #24 [00013f2b80 - 00013f2bc0] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #25 [00013f2bc0 - 00013f2c00] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #26 [00013f2c00 - 00013f2c40] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #27 [00013f2c40 - 00013f2c80] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #28 [00013f2c80 - 00013f2cc0] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #29 [00013f2cc0 - 00013f2cd0] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #30 [00013f2d00 - 00013f2d10] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #31 [00013f2d40 - 00013f2dc2] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #32 [00013f2e00 - 00013f2e82] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #33 [0001400000 - 000140e000] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #34 [0001600000 - 000160e000] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #35 [00013f4ec0 - 00013f4ec4] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #36 [00013f4f00 - 00013f4f04] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #37 [00013f4f40 - 00013f4f48] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #38 [00013f4f80 - 00013f4f88] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #39 [00013f4fc0 - 00013f5068] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #40 [00013f5080 - 00013f50e8] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #41 [00013f2ec0 - 00013f4ec0] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #42 [000140e000 - 000144e000] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #43 [000144e000 - 000146e000] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Â #44 [000160e000 - 0001883eac] Â Â Â Â BOOTMEM
>> [ Â Â0.000000] Initializing HighMem for node 0 (00000000:00000000)
>> [ Â Â0.000000] Memory: 489096k/516032k available (4928k kernel code,
>> 26456k reserved, 2336k data, 684k init, 0k highmem)
>> [ Â Â0.000000] virtual kernel memory layout:
>> [ Â Â0.000000] Â Â fixmap Â: 0xfff16000 - 0xfffff000 Â ( 932 kB)
>> [ Â Â0.000000] Â Â pkmap Â : 0xff800000 - 0xffc00000 Â (4096 kB)
>> [ Â Â0.000000] Â Â vmalloc : 0xdfff0000 - 0xff7fe000 Â ( 504 MB)
>> [ Â Â0.000000] Â Â lowmem Â: 0xc0000000 - 0xdf7f0000 Â ( 503 MB)
>> [ Â Â0.000000] Â Â Â .init : 0xc0819000 - 0xc08c4000 Â ( 684 kB)
>> [ Â Â0.000000] Â Â Â .data : 0xc05d029e - 0xc0818668 Â (2336 kB)
>> [ Â Â0.000000] Â Â Â .text : 0xc0100000 - 0xc05d029e Â (4928 kB)
>> [ Â Â0.000000] Checking if this processor honours the WP bit even in
>> supervisor mode...Ok.
>> [ Â Â0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3,
>> MinObjects=0, CPUs=2, Nodes=1
>> [ Â Â0.000000] Hierarchical RCU implementation.
>> [ Â Â0.000000] ÂRCU dyntick-idle grace-period acceleration is enabled.
>> [ Â Â0.000000] ÂRCU-based detection of stalled CPUs is disabled.
>> [ Â Â0.000000] ÂVerbose stalled-CPUs detection is disabled.
>> [ Â Â0.000000] NR_IRQS:2304 nr_irqs:512
>> [ Â Â0.000000] Console: colour VGA+ 80x25
>> [ Â Â0.000000] console [tty0] enabled
>> [ Â Â0.000000] Fast TSC calibration using PIT
>> [ Â Â0.000000] Detected 2000.387 MHz processor.
>> [ Â Â0.008006] Calibrating delay loop (skipped), value calculated
>> using timer frequency.. 4000.77 BogoMIPS (lpj=8001548)
>> [ Â Â0.008016] pid_max: default: 32768 minimum: 301
>> [ Â Â0.008045] Security Framework initialized
>> [ Â Â0.008074] AppArmor: AppArmor initialized
>> [ Â Â0.008079] Yama: becoming mindful.
>> [ Â Â0.008179] Mount-cache hash table entries: 512
>> [ Â Â0.012088] Initializing cgroup subsys ns
>> [ Â Â0.012096] Initializing cgroup subsys cpuacct
>> [ Â Â0.012105] Initializing cgroup subsys memory
>> [ Â Â0.012124] Initializing cgroup subsys devices
>> [ Â Â0.012129] Initializing cgroup subsys freezer
>> [ Â Â0.012133] Initializing cgroup subsys net_cls
>> [ Â Â0.012186] CPU0: Hyper-Threading is disabled
>> [ Â Â0.012193] mce: CPU supports 4 MCE banks
>> [ Â Â0.012211] CPU0: Thermal monitoring enabled (TM1)
>> [ Â Â0.012227] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
>> [ Â Â0.012267] ... version: Â Â Â Â Â Â Â Â0
>> [ Â Â0.012271] ... bit width: Â Â Â Â Â Â Â40
>> [ Â Â0.012275] ... generic registers: Â Â Â18
>> [ Â Â0.012279] ... value mask: Â Â Â Â Â Â 000000ffffffffff
>> [ Â Â0.012283] ... max period: Â Â Â Â Â Â 0000007fffffffff
>> [ Â Â0.012287] ... fixed-purpose events: Â 0
>> [ Â Â0.012291] ... event mask: Â Â Â Â Â Â 000000000003ffff
>> [ Â Â0.013897] SMP alternatives: switching to UP code
>> [ Â Â0.030477] ACPI: Core revision 20100428
>> [ Â Â0.039528] ftrace: converting mcount calls to 0f 1f 44 00 00
>> [ Â Â0.039539] ftrace: allocating 21758 entries in 43 pages
>> [ Â Â0.040119] Enabling APIC mode: ÂFlat. ÂUsing 1 I/O APICs
>> [ Â Â0.040477] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ Â Â0.083182] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
>> [ Â Â0.084000] Brought up 1 CPUs
>> [ Â Â0.084000] Total of 1 processors activated (4000.77 BogoMIPS).
>> [ Â Â0.084000] devtmpfs: initialized
>> [ Â Â0.084000] regulator: core version 0.5
>> [ Â Â0.084000] Time: 13:43:52 ÂDate: 01/22/11
>> [ Â Â0.084000] NET: Registered protocol family 16
>> [ Â Â0.084000] EISA bus registered
>> [ Â Â0.084000] ACPI: bus type pci registered
>> [ Â Â0.084000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
>> 0xe0000000-0xefffffff] (base 0xe0000000)
>> [ Â Â0.084000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>> [ Â Â0.084000] PCI: Using MMCONFIG for extended config space
>> [ Â Â0.084000] PCI: Using configuration type 1 for base access
>> [ Â Â0.085207] bio: create slab <bio-0> at 0
>> [ Â Â0.086601] ACPI: EC: Look up EC in DSDT
>> [ Â Â0.094138] ACPI: Interpreter enabled
>> [ Â Â0.094145] ACPI: (supports S0 S1 S4 S5)
>> [ Â Â0.094186] ACPI: Using IOAPIC for interrupt routing
>> [ Â Â0.102943] ACPI: No dock devices found.
>> [ Â Â0.102950] PCI: Using host bridge windows from ACPI; if necessary,
>> use "pci=nocrs" and report a bug
>> [ Â Â0.103132] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>> [ Â Â0.103476] pci_root PNP0A08:00: host bridge window [io Â0x0000-0x0cf7]
>> [ Â Â0.103482] pci_root PNP0A08:00: host bridge window [io Â0x0d00-0xffff]
>> [ Â Â0.103487] pci_root PNP0A08:00: host bridge window [mem
>> 0x000a0000-0x000bffff]
>> [ Â Â0.103492] pci_root PNP0A08:00: host bridge window [mem
>> 0x000c0000-0x000dffff]
>> [ Â Â0.103497] pci_root PNP0A08:00: host bridge window [mem
>> 0x1f800000-0xfebfffff]
>> [ Â Â0.103598] pci 0000:00:02.0: reg 10: [mem 0xfdf00000-0xfdf7ffff]
>> [ Â Â0.103607] pci 0000:00:02.0: reg 14: [io Â0xff00-0xff07]
>> [ Â Â0.103616] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
>> [ Â Â0.103624] pci 0000:00:02.0: reg 1c: [mem 0xfdf80000-0xfdfbffff]
>> [ Â Â0.103733] pci 0000:00:1d.0: reg 20: [io Â0xfe00-0xfe1f]
>> [ Â Â0.103800] pci 0000:00:1d.1: reg 20: [io Â0xfd00-0xfd1f]
>> [ Â Â0.103868] pci 0000:00:1d.2: reg 20: [io Â0xfc00-0xfc1f]
>> [ Â Â0.103934] pci 0000:00:1d.3: reg 20: [io Â0xfb00-0xfb1f]
>> [ Â Â0.104011] pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
>> [ Â Â0.104075] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>> [ Â Â0.104082] pci 0000:00:1d.7: PME# disabled
>> [ Â Â0.104185] pci 0000:00:1e.2: reg 10: [io Â0xf000-0xf0ff]
>> [ Â Â0.104194] pci 0000:00:1e.2: reg 14: [io Â0xfa00-0xfa3f]
>> [ Â Â0.104204] pci 0000:00:1e.2: reg 18: [mem 0xfdffe000-0xfdffe1ff]
>> [ Â Â0.104213] pci 0000:00:1e.2: reg 1c: [mem 0xfdffd000-0xfdffd0ff]
>> [ Â Â0.104252] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
>> [ Â Â0.104259] pci 0000:00:1e.2: PME# disabled
>> [ Â Â0.104355] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>> [ Â Â0.104365] pci 0000:00:1f.0: quirk: [io Â0x0400-0x047f] claimed by
>> ICH6 ACPI/GPIO/TCO
>> [ Â Â0.104372] pci 0000:00:1f.0: quirk: [io Â0x0480-0x04bf] claimed by ICH6 GPIO
>> [ Â Â0.104378] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0800-087f
>> [ Â Â0.104422] pci 0000:00:1f.2: reg 10: [io Â0x0000-0x0007]
>> [ Â Â0.104431] pci 0000:00:1f.2: reg 14: [io Â0x0000-0x0003]
>> [ Â Â0.104441] pci 0000:00:1f.2: reg 18: [io Â0x0000-0x0007]
>> [ Â Â0.104450] pci 0000:00:1f.2: reg 1c: [io Â0x0000-0x0003]
>> [ Â Â0.104459] pci 0000:00:1f.2: reg 20: [io Â0xf800-0xf80f]
>> [ Â Â0.104493] pci 0000:00:1f.2: PME# supported from D3hot
>> [ Â Â0.104499] pci 0000:00:1f.2: PME# disabled
>> [ Â Â0.104558] pci 0000:00:1f.3: reg 20: [io Â0x0500-0x051f]
>> [ Â Â0.104663] pci 0000:01:04.0: reg 10: [io Â0xde00-0xdeff]
>> [ Â Â0.104674] pci 0000:01:04.0: reg 14: [mem 0xfddff000-0xfddff0ff]
>> [ Â Â0.104732] pci 0000:01:04.0: supports D1 D2
>> [ Â Â0.104736] pci 0000:01:04.0: PME# supported from D1 D2 D3hot D3cold
>> [ Â Â0.104742] pci 0000:01:04.0: PME# disabled
>> [ Â Â0.104798] pci 0000:01:09.0: reg 10: [mem 0xfddfe000-0xfddfefff]
>> [ Â Â0.104809] pci 0000:01:09.0: reg 14: [io Â0xdc00-0xdcff]
>> [ Â Â0.104871] pci 0000:01:09.0: PME# supported from D0 D3hot D3cold
>> [ Â Â0.104878] pci 0000:01:09.0: PME# disabled
>> [ Â Â0.104925] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
>> [ Â Â0.104932] pci 0000:00:1e.0: Â bridge window [io Â0xd000-0xdfff]
>> [ Â Â0.104939] pci 0000:00:1e.0: Â bridge window [mem 0xfdd00000-0xfddfffff]
>> [ Â Â0.104949] pci 0000:00:1e.0: Â bridge window [mem
>> 0xfde00000-0xfdefffff 64bit pref]
>> [ Â Â0.104954] pci 0000:00:1e.0: Â bridge window [io Â0x0000-0x0cf7]
>> (subtractive decode)
>> [ Â Â0.104958] pci 0000:00:1e.0: Â bridge window [io Â0x0d00-0xffff]
>> (subtractive decode)
>> [ Â Â0.104963] pci 0000:00:1e.0: Â bridge window [mem
>> 0x000a0000-0x000bffff] (subtractive decode)
>> [ Â Â0.104968] pci 0000:00:1e.0: Â bridge window [mem
>> 0x000c0000-0x000dffff] (subtractive decode)
>> [ Â Â0.104973] pci 0000:00:1e.0: Â bridge window [mem
>> 0x1f800000-0xfebfffff] (subtractive decode)
>> [ Â Â0.104985] pci_bus 0000:00: on NUMA node 0
>> [ Â Â0.104993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> [ Â Â0.105245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>> [ Â Â0.119099] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>> [ Â Â0.119277] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11 12 14 15)
>> [ Â Â0.119451] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>> [ Â Â0.119625] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>> [ Â Â0.119796] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>> [ Â Â0.119968] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11
>> 12 14 15) *0, disabled.
>> [ Â Â0.120158] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11
>> 12 14 15) *0, disabled.
>> [ Â Â0.120333] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>> [ Â Â0.120414] HEST: Table is not found!
>> [ Â Â0.120554] vgaarb: device added:
>> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>> [ Â Â0.120567] vgaarb: loaded
>> [ Â Â0.120896] SCSI subsystem initialized
>> [ Â Â0.121014] libata version 3.00 loaded.
>> [ Â Â0.121119] usbcore: registered new interface driver usbfs
>> [ Â Â0.121143] usbcore: registered new interface driver hub
>> [ Â Â0.121189] usbcore: registered new device driver usb
>> [ Â Â0.121435] ACPI: WMI: Mapper loaded
>> [ Â Â0.121440] PCI: Using ACPI for IRQ routing
>> [ Â Â0.121444] PCI: Routing PCI interrupts for all devices because
>> "pci=routeirq" specified
>> [ Â Â0.121457] Â alloc irq_desc for 16 on node -1
>> [ Â Â0.121461] Â alloc kstat_irqs on node -1
>> [ Â Â0.121475] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> [ Â Â0.121482] Â alloc irq_desc for 23 on node -1
>> [ Â Â0.121485] Â alloc kstat_irqs on node -1
>> [ Â Â0.121492] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>> [ Â Â0.121498] Â alloc irq_desc for 19 on node -1
>> [ Â Â0.121501] Â alloc kstat_irqs on node -1
>> [ Â Â0.121508] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>> [ Â Â0.121513] Â alloc irq_desc for 18 on node -1
>> [ Â Â0.121516] Â alloc kstat_irqs on node -1
>> [ Â Â0.121522] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>> [ Â Â0.121531] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>> [ Â Â0.121537] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>> [ Â Â0.121543] Â alloc irq_desc for 17 on node -1
>> [ Â Â0.121546] Â alloc kstat_irqs on node -1
>> [ Â Â0.121553] pci 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>> [ Â Â0.121560] pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>> [ Â Â0.121567] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>> [ Â Â0.121573] Â alloc irq_desc for 20 on node -1
>> [ Â Â0.121577] Â alloc kstat_irqs on node -1
>> [ Â Â0.121582] pci 0000:01:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>> [ Â Â0.121589] pci 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>> [ Â Â0.121594] PCI: pci_cache_line_size set to 64 bytes
>> [ Â Â0.121672] reserve RAM buffer: 0000000000002000 - 000000000000ffff
>> [ Â Â0.121677] reserve RAM buffer: 0000000000097c00 - 000000000009ffff
>> [ Â Â0.121683] reserve RAM buffer: 000000001f7f0000 - 000000001fffffff
>> [ Â Â0.121859] NetLabel: Initializing
>> [ Â Â0.121863] NetLabel: Âdomain hash size = 128
>> [ Â Â0.121866] NetLabel: Âprotocols = UNLABELED CIPSOv4
>> [ Â Â0.121894] NetLabel: Âunlabeled traffic allowed by default
>> [ Â Â0.122084] hpet clockevent registered
>> [ Â Â0.122090] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>> [ Â Â0.122100] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>> [ Â Â0.122109] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>> [ Â Â0.128035] Switching to clocksource tsc
>> [ Â Â0.146649] AppArmor: AppArmor Filesystem Enabled
>> [ Â Â0.146685] pnp: PnP ACPI init
>> [ Â Â0.146725] ACPI: bus type pnp registered
>> [ Â Â0.151647] pnp: PnP ACPI: found 12 devices
>> [ Â Â0.151651] ACPI: ACPI bus type pnp unregistered
>> [ Â Â0.151657] PnPBIOS: Disabled by ACPI PNP
>> [ Â Â0.151679] system 00:01: [io Â0x04d0-0x04d1] has been reserved
>> [ Â Â0.151686] system 00:01: [io Â0x0800-0x087f] has been reserved
>> [ Â Â0.151699] system 00:08: [io Â0x0400-0x04bf] could not be reserved
>> [ Â Â0.151709] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
>> [ Â Â0.151719] system 00:0b: [mem 0x000cae00-0x000cbfff] has been reserved
>> [ Â Â0.151725] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
>> [ Â Â0.151730] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
>> [ Â Â0.151735] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
>> [ Â Â0.151741] system 00:0b: [mem 0x1f7f0000-0x1f7fffff] could not be reserved
>> [ Â Â0.151746] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
>> [ Â Â0.151752] system 00:0b: [mem 0x00100000-0x1f7effff] could not be reserved
>> [ Â Â0.151758] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
>> [ Â Â0.151763] system 00:0b: [mem 0xfed13000-0xfed1dfff] has been reserved
>> [ Â Â0.151768] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
>> [ Â Â0.151774] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>> [ Â Â0.151779] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
>> [ Â Â0.151784] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
>> [ Â Â0.151789] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
>> [ Â Â0.189171] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
>> [ Â Â0.189181] pci 0000:00:1e.0: Â bridge window [io Â0xd000-0xdfff]
>> [ Â Â0.189189] pci 0000:00:1e.0: Â bridge window [mem 0xfdd00000-0xfddfffff]
>> [ Â Â0.189197] pci 0000:00:1e.0: Â bridge window [mem
>> 0xfde00000-0xfdefffff 64bit pref]
>> [ Â Â0.189219] pci 0000:00:1e.0: setting latency timer to 64
>> [ Â Â0.189227] pci_bus 0000:00: resource 4 [io Â0x0000-0x0cf7]
>> [ Â Â0.189232] pci_bus 0000:00: resource 5 [io Â0x0d00-0xffff]
>> [ Â Â0.189236] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>> [ Â Â0.189241] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>> [ Â Â0.189245] pci_bus 0000:00: resource 8 [mem 0x1f800000-0xfebfffff]
>> [ Â Â0.189250] pci_bus 0000:01: resource 0 [io Â0xd000-0xdfff]
>> [ Â Â0.189254] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
>> [ Â Â0.189259] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff
>> 64bit pref]
>> [ Â Â0.189264] pci_bus 0000:01: resource 4 [io Â0x0000-0x0cf7]
>> [ Â Â0.189268] pci_bus 0000:01: resource 5 [io Â0x0d00-0xffff]
>> [ Â Â0.189273] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
>> [ Â Â0.189277] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
>> [ Â Â0.189282] pci_bus 0000:01: resource 8 [mem 0x1f800000-0xfebfffff]
>> [ Â Â0.189348] NET: Registered protocol family 2
>> [ Â Â0.189458] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>> [ Â Â0.189799] TCP established hash table entries: 16384 (order: 5,
>> 131072 bytes)
>> [ Â Â0.189907] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>> [ Â Â0.190015] TCP: Hash tables configured (established 16384 bind 16384)
>> [ Â Â0.190019] TCP reno registered
>> [ Â Â0.190024] UDP hash table entries: 256 (order: 1, 8192 bytes)
>> [ Â Â0.190034] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
>> [ Â Â0.190149] NET: Registered protocol family 1
>> [ Â Â0.190179] pci 0000:00:02.0: Boot video device
>> [ Â Â0.190321] PCI: CLS 32 bytes, default 64
>> [ Â Â0.190618] cpufreq-nforce2: No nForce2 chipset.
>> [ Â Â0.190670] Scanning for low memory corruption every 60 seconds
>> [ Â Â0.190939] audit: initializing netlink socket (disabled)
>> [ Â Â0.190961] type=2000 audit(1295703832.184:1): initialized
>> [ Â Â0.203649] Trying to unpack rootfs image as initramfs...
>> [ Â Â0.220092] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>> [ Â Â0.228496] VFS: Disk quotas dquot_6.5.2
>> [ Â Â0.228650] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>> [ Â Â0.229819] fuse init (API version 7.14)
>> [ Â Â0.229982] msgmni has been set to 955
>> [ Â Â0.236580] Block layer SCSI generic (bsg) driver version 0.4
>> loaded (major 253)
>> [ Â Â0.236587] io scheduler noop registered
>> [ Â Â0.236591] io scheduler deadline registered
>> [ Â Â0.236617] io scheduler cfq registered (default)
>> [ Â Â0.236821] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> [ Â Â0.236865] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>> [ Â Â0.237185] input: Power Button as
>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>> [ Â Â0.237197] ACPI: Power Button [PWRB]
>> [ Â Â0.237280] input: Sleep Button as
>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>> [ Â Â0.237296] ACPI: Sleep Button [SLPB]
>> [ Â Â0.237386] input: Power Button as
>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>> [ Â Â0.237393] ACPI: Power Button [PWRF]
>> [ Â Â0.237796] ACPI: acpi_idle registered with cpuidle
>> [ Â Â0.241683] ERST: Table is not found!
>> [ Â Â0.244483] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>> [ Â Â0.244686] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> [ Â Â0.245153] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> [ Â Â0.245366] serial 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>> [ Â Â0.245539] 0000:01:09.0: ttyS0 at I/O 0xdc08 (irq = 17) is a 16450
>> [ Â Â0.245654] 0000:01:09.0: ttyS2 at I/O 0xdc10 (irq = 17) is a 8250
>> [ Â Â0.245768] 0000:01:09.0: ttyS3 at I/O 0xdc18 (irq = 17) is a 16450
>> [ Â Â0.245812] Couldn't register serial port 0000:01:09.0: -28
>> [ Â Â0.247682] brd: module loaded
>> [ Â Â0.248014] isapnp: Scanning for PnP cards...
>> [ Â Â0.257148] loop: module loaded
>> [ Â Â0.257561] ata_piix 0000:00:1f.2: version 2.13
>> [ Â Â0.257594] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>> [ Â Â0.257603] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>> [ Â Â0.257678] ata_piix 0000:00:1f.2: setting latency timer to 64
>> [ Â Â0.260002] scsi0 : ata_piix
>> [ Â Â0.307559] scsi1 : ata_piix
>> [ Â Â0.308996] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
>> [ Â Â0.309003] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
>> [ Â Â0.309771] Fixed MDIO Bus: probed
>> [ Â Â0.309844] PPP generic driver version 2.4.2
>> [ Â Â0.309971] tun: Universal TUN/TAP device driver, 1.6
>> [ Â Â0.309975] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
>> [ Â Â0.310127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [ Â Â0.310174] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>> [ Â Â0.310206] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>> [ Â Â0.310213] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>> [ Â Â0.310286] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
>> bus number 1
>> [ Â Â0.314230] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>> [ Â Â0.320419] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
>> [ Â Â0.340183] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>> [ Â Â0.340493] hub 1-0:1.0: USB hub found
>> [ Â Â0.340504] hub 1-0:1.0: 8 ports detected
>> [ Â Â0.340637] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> [ Â Â0.340669] uhci_hcd: USB Universal Host Controller Interface driver
>> [ Â Â0.340755] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>> [ Â Â0.340770] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>> [ Â Â0.340776] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>> [ Â Â0.340852] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
>> bus number 2
>> [ Â Â0.340890] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
>> [ Â Â0.341107] hub 2-0:1.0: USB hub found
>> [ Â Â0.341116] hub 2-0:1.0: 2 ports detected
>> [ Â Â0.341204] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>> [ Â Â0.341214] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>> [ Â Â0.341220] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>> [ Â Â0.341289] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
>> bus number 3
>> [ Â Â0.341344] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
>> [ Â Â0.341547] hub 3-0:1.0: USB hub found
>> [ Â Â0.341555] hub 3-0:1.0: 2 ports detected
>> [ Â Â0.341645] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>> [ Â Â0.341655] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>> [ Â Â0.341660] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>> [ Â Â0.341724] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
>> bus number 4
>> [ Â Â0.341771] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
>> [ Â Â0.341991] hub 4-0:1.0: USB hub found
>> [ Â Â0.341999] hub 4-0:1.0: 2 ports detected
>> [ Â Â0.342094] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>> [ Â Â0.342103] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>> [ Â Â0.342109] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>> [ Â Â0.342181] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
>> bus number 5
>> [ Â Â0.342227] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
>> [ Â Â0.342427] hub 5-0:1.0: USB hub found
>> [ Â Â0.342435] hub 5-0:1.0: 2 ports detected
>> [ Â Â0.342647] PNP: No PS/2 controller found. Probing ports directly.
>> [ Â Â0.456034] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [ Â Â0.456290] mice: PS/2 mouse device common for all mice
>> [ Â Â0.456567] rtc_cmos 00:03: RTC can wake from S4
>> [ Â Â0.456641] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>> [ Â Â0.456682] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>> [ Â Â0.456912] device-mapper: uevent: version 1.0.3
>> [ Â Â0.460533] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05)
>> initialised: dm-devel@xxxxxxxxxx
>> [ Â Â0.464431] device-mapper: multipath: version 1.1.1 loaded
>> [ Â Â0.464439] device-mapper: multipath round-robin: version 1.0.0 loaded
>> [ Â Â0.468346] EISA: Probing bus 0 at eisa.0
>> [ Â Â0.468353] EISA: Cannot allocate resource for mainboard
>> [ Â Â0.468358] Cannot allocate resource for EISA slot 1
>> [ Â Â0.468361] Cannot allocate resource for EISA slot 2
>> [ Â Â0.468365] Cannot allocate resource for EISA slot 3
>> [ Â Â0.468370] Cannot allocate resource for EISA slot 4
>> [ Â Â0.468373] Cannot allocate resource for EISA slot 5
>> [ Â Â0.468376] Cannot allocate resource for EISA slot 6
>> [ Â Â0.468380] Cannot allocate resource for EISA slot 7
>> [ Â Â0.468383] Cannot allocate resource for EISA slot 8
>> [ Â Â0.468387] EISA: Detected 0 cards.
>> [ Â Â0.472395] cpuidle: using governor ladder
>> [ Â Â0.472401] cpuidle: using governor menu
>> [ Â Â0.472946] TCP cubic registered
>> [ Â Â0.473197] NET: Registered protocol family 10
>> [ Â Â0.473819] lo: Disabled Privacy Extensions
>> [ Â Â0.474180] NET: Registered protocol family 17
>> [ Â Â0.474278] Using IPI No-Shortcut mode
>> [ Â Â0.474470] PM: Resume from disk failed.
>> [ Â Â0.474497] registered taskstats version 1
>> [ Â Â0.474761] Â Magic number: 11:683:736
>> [ Â Â0.474887] rtc_cmos 00:03: setting system clock to 2011-01-22
>> 13:43:52 UTC (1295703832)
>> [ Â Â0.474893] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>> [ Â Â0.474896] EDD information not available.
>> [ Â Â0.540842] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S222A, SB01, max UDMA/66
>> [ Â Â0.556208] ata2.00: configured for UDMA/66
>> [ Â Â0.619465] ata1.00: ATA-7: MAXTOR STM380211AS, 3.AAE, max UDMA/133
>> [ Â Â0.619473] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> [ Â Â0.707546] ata1.00: configured for UDMA/133
>> [ Â Â0.971500] isapnp: No Plug & Play device found
>> [ Â Â0.971760] scsi 0:0:0:0: Direct-Access Â Â ATA Â Â ÂMAXTOR
>> STM380211 3.AA PQ: 0 ANSI: 5
>> [ Â Â0.972086] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> [ Â Â0.972354] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks:
>> (80.0 GB/74.5 GiB)
>> [ Â Â0.972451] sd 0:0:0:0: [sda] Write Protect is off
>> [ Â Â0.972457] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [ Â Â0.972638] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>> enabled, doesn't support DPO or FUA
>> [ Â Â0.972869] scsi 1:0:0:0: CD-ROM Â Â Â Â Â ÂTSSTcorp CDDVDW
>> SH-S222A ÂSB01 PQ: 0 ANSI: 5
>> [ Â Â0.973234] Âsda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
>> xa/form2 cdda tray
>> [ Â Â0.978858] Uniform CD-ROM driver Revision: 3.20
>> [ Â Â0.979081] sr 1:0:0:0: Attached scsi CD-ROM sr0
>> [ Â Â0.979204] sr 1:0:0:0: Attached scsi generic sg1 type 5
>> [ Â Â0.997557] Âsda1 sda2 sda3 sda4 < sda5 sda6 >
>> [ Â Â1.038252] sd 0:0:0:0: [sda] Attached SCSI disk
>> [ Â Â1.104858] Freeing initrd memory: 10508k freed
>> [ Â Â1.118095] Freeing unused kernel memory: 684k freed
>> [ Â Â1.119130] Write protecting the kernel text: 4932k
>> [ Â Â1.119188] Write protecting the kernel read-only data: 1976k
>> [ Â Â1.120082] usb 2-1: new full speed USB device using uhci_hcd and address 2
>> [ Â Â1.157022] udev[67]: starting version 163
>> [ Â Â1.556196] usb 4-1: new low speed USB device using uhci_hcd and address 2
>> [ Â Â1.623784] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>> [ Â Â1.623821] 8139cp 0000:01:04.0: This (id 10ec:8139 rev 10) is not
>> an 8139C+ compatible chip, use 8139too
>> [ Â Â1.635939] 8139too: 8139too Fast Ethernet driver 0.9.28
>> [ Â Â1.636047] 8139too 0000:01:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>> [ Â Â1.638255] 8139too 0000:01:04.0: eth0: RealTek RTL8139 at 0xde00,
>> 00:e0:4c:19:1d:a7, IRQ 20
>> [ Â Â1.818860] usbcore: registered new interface driver hiddev
>> [ Â Â1.832534] input: USB USB Keykoard as
>> /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3
>> [ Â Â1.832851] generic-usb 0003:1C4F:0002.0001: input,hidraw0: USB HID
>> v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.2-1/input0
>> [ Â Â2.008025] usb 4-2: new low speed USB device using uhci_hcd and address 3
>> [ Â Â2.411058] EXT4-fs (sda2): mounted filesystem with ordered data
>> mode. Opts: (null)
>> [ Â 11.679178] Adding 787180k swap on /dev/sda3. ÂPriority:-1
>> extents:1 across:787180k
>> [ Â 11.808859] udev[301]: starting version 163
>> [ Â 11.850092] /build/buildd/linux-2.6.35/drivers/hid/usbhid/hid-core.c:
>> usb_submit_urb(ctrl) failed
>> [ Â 11.850160] generic-usb 0003:1C4F:0002.0002: timeout initializing reports
>> [ Â 11.850377] input: USB USB Keykoard as
>> /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input4
>> [ Â 11.850558] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID
>> v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.2-1/input1
>> [ Â 11.864732] input: SIGMACHIP Usb Mouse as
>> /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input5
>> [ Â 11.865525] generic-usb 0003:1C4F:0003.0003: input,hidraw2: USB HID
>> v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.2-2/input0
>> [ Â 11.865947] usbcore: registered new interface driver usbhid
>> [ Â 11.865953] usbhid: USB HID core driver
>> [ Â 12.038347] lp: driver loaded but no devices found
>> [ Â 12.365245] intel_rng: FWH not detected
>> [ Â 12.640202] Linux agpgart interface v0.103
>> [ Â 12.734031] parport_pc 00:07: reported by Plug and Play ACPI
>> [ Â 12.734085] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>> [ Â 12.931000] agpgart-intel 0000:00:00.0: Intel 915G Chipset
>> [ Â 12.931515] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>> [ Â 12.935044] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>> [ Â 12.936629] lp0: using parport0 (interrupt-driven).
>> [ Â 12.964084] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>> [ Â 12.989744] Linux video capture interface: v2.00
>> [ Â 13.105852] gspca: main v2.9.0 registered
>> [ Â 13.138728] ppdev: user-space parallel port driver
>> [ Â 13.226015] gspca: probing 046d:092f
>> [ Â 13.255353] type=1400 audit(1295675045.274:2): apparmor="STATUS"
>> operation="profile_load" name="/sbin/dhclient3" pid=552
>> comm="apparmor_parser"
>> [ Â 13.256265] type=1400 audit(1295675045.278:3): apparmor="STATUS"
>> operation="profile_load"
>> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=552
>> comm="apparmor_parser"
>> [ Â 13.256726] type=1400 audit(1295675045.278:4): apparmor="STATUS"
>> operation="profile_load"
>> name="/usr/lib/connman/scripts/dhclient-script" pid=552
>> comm="apparmor_parser"
>> [ Â 13.287908] input: spca561 as
>> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/input/input6
>> [ Â 13.288147] gspca: video0 created
>> [ Â 13.288191] usbcore: registered new interface driver spca561
>> [ Â 13.288195] spca561: registered
>> [ Â 13.429159] [drm] Initialized drm 1.1.0 20060810
>> [ Â 13.671611] EXT3-fs: barriers not enabled
>> [ Â 13.683686] kjournald starting. ÂCommit interval 5 seconds
>> [ Â 13.683932] EXT3-fs (sda5): using internal journal
>> [ Â 13.683944] EXT3-fs (sda5): mounted filesystem with ordered data mode
>> [ Â 13.707229] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> [ Â 13.707240] i915 0000:00:02.0: setting latency timer to 64
>> [ Â 13.906111] [drm] set up 7M of stolen space
>> [ Â 13.907847] vgaarb: device changed decodes:
>> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>> [ Â 13.908334] [drm] initialized overlay support
>> [ Â 13.945070] ip_tables: (C) 2000-2006 Netfilter Core Team
>> [ Â 14.175617] nf_conntrack version 0.5.0 (7817 buckets, 31268 max)
>> [ Â 14.178818] CONFIG_NF_CT_ACCT is deprecated and will be removed
>> soon. Please use
>> [ Â 14.178826] nf_conntrack.acct=1 kernel parameter, acct=1
>> nf_conntrack module option or
>> [ Â 14.178830] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>> [ Â 14.376554] Console: switching to colour frame buffer device 160x64
>> [ Â 14.383642] fb0: inteldrmfb frame buffer device
>> [ Â 14.383646] drm: registered panic notifier
>> [ Â 14.383752] Slow work thread pool: Starting up
>> [ Â 14.383855] Slow work thread pool: Ready
>> [ Â 14.383874] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>> [ Â 14.384252] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level,
>> low) -> IRQ 17
>> [ Â 14.384325] Intel ICH 0000:00:1e.2: setting latency timer to 64
>> [ Â 14.716034] intel8x0_measure_ac97_clock: measured 55566 usecs (2678 samples)
>> [ Â 14.716042] intel8x0: clocking to 48000
>> [ Â 16.951761] type=1400 audit(1295675048.970:5): apparmor="STATUS"
>> operation="profile_load" name="/usr/share/gdm/guest-session/Xsession"
>> pid=900 comm="apparmor_parser"
>> [ Â 16.995166] type=1400 audit(1295675049.014:6): apparmor="STATUS"
>> operation="profile_replace" name="/sbin/dhclient3" pid=903
>> comm="apparmor_parser"
>> [ Â 16.996064] type=1400 audit(1295675049.018:7): apparmor="STATUS"
>> operation="profile_replace"
>> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=903
>> comm="apparmor_parser"
>> [ Â 17.005974] type=1400 audit(1295675049.026:8): apparmor="STATUS"
>> operation="profile_replace"
>> name="/usr/lib/connman/scripts/dhclient-script" pid=903
>> comm="apparmor_parser"
>> [ Â 17.045975] type=1400 audit(1295675049.066:9): apparmor="STATUS"
>> operation="profile_load" name="/usr/bin/evince" pid=907
>> comm="apparmor_parser"
>> [ Â 17.083141] type=1400 audit(1295675049.102:10): apparmor="STATUS"
>> operation="profile_load" name="/usr/bin/evince-previewer" pid=907
>> comm="apparmor_parser"
>> [ Â 17.099655] type=1400 audit(1295675049.118:11): apparmor="STATUS"
>> operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=907
>> comm="apparmor_parser"
>> [ Â 20.959986] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
>> [ Â 22.108024] serial8250: too much work for irq17
>> [ Â 22.183768] serial8250: too much work for irq17
>> [ Â 22.280005] serial8250: too much work for irq17
>> [ Â 22.354399] serial8250: too much work for irq17
>> [ Â 22.451833] serial8250: too much work for irq17
>> [ Â 22.524992] serial8250: too much work for irq17
>> [ Â 22.622450] serial8250: too much work for irq17
>> [ Â 22.695616] serial8250: too much work for irq17
>> [ Â 22.793047] serial8250: too much work for irq17
>> [ Â 22.866208] serial8250: too much work for irq17
>> [ Â 22.963675] serial8250: too much work for irq17
>> [ Â 23.036847] serial8250: too much work for irq17
>> [ Â 23.113221] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
>> [ Â 23.132007] serial8250: too much work for irq17
>> [ Â 23.207467] serial8250: too much work for irq17
>> [ Â 23.304025] serial8250: too much work for irq17
>> [ Â 23.376029] serial8250: too much work for irq17
>> [ Â 23.475519] serial8250: too much work for irq17
>> [ Â 23.548690] serial8250: too much work for irq17
>> [ Â 23.644016] serial8250: too much work for irq17
>> [ Â 23.719318] serial8250: too much work for irq17
>> [ Â 23.816749] serial8250: too much work for irq17
>> [ Â 23.888005] serial8250: too much work for irq17
>> [ Â 23.987372] serial8250: too much work for irq17
>> [ Â 24.060549] serial8250: too much work for irq17
>> [ Â 24.157978] serial8250: too much work for irq17
>> [ Â 24.231143] serial8250: too much work for irq17
>> [ Â 24.328584] serial8250: too much work for irq17
>> [ Â 24.401757] serial8250: too much work for irq17
>> [ Â 24.499195] serial8250: too much work for irq17
>> [ Â 24.572370] serial8250: too much work for irq17
>> [ Â 24.669834] serial8250: too much work for irq17
>> [ Â 24.742997] serial8250: too much work for irq17
>> [ Â 24.840413] serial8250: too much work for irq17
>> [ Â 24.913597] serial8250: too much work for irq17
>> [ Â 25.011050] serial8250: too much work for irq17
>> [ Â 25.084215] serial8250: too much work for irq17
>> [ Â 25.181660] serial8250: too much work for irq17
>> [ Â 25.254825] serial8250: too much work for irq17
>> [ Â 25.352283] serial8250: too much work for irq17
>> [ Â 25.425455] serial8250: too much work for irq17
>> [ Â 25.522881] serial8250: too much work for irq17
>> [ Â 25.596048] serial8250: too much work for irq17
>> [ Â 25.693501] serial8250: too much work for irq17
>> [ Â 25.766676] serial8250: too much work for irq17
>> [ Â 25.864115] serial8250: too much work for irq17
>> [ Â 25.937312] serial8250: too much work for irq17
>> [ Â 26.032020] serial8250: too much work for irq17
>> [ Â 26.107929] serial8250: too much work for irq17
>> [ Â 26.204025] serial8250: too much work for irq17
>> [ Â 26.278541] serial8250: too much work for irq17
>> [ Â 26.375968] serial8250: too much work for irq17
>> [ Â 26.449141] serial8250: too much work for irq17
>> [ Â 26.546576] serial8250: too much work for irq17
>> [ Â 26.619746] serial8250: too much work for irq17
>> [ Â 26.717212] serial8250: too much work for irq17
>> [ Â 26.790377] serial8250: too much work for irq17
>> [ Â 26.887795] serial8250: too much work for irq17
>> [ Â 26.960996] serial8250: too much work for irq17
>> [ Â 27.058426] serial8250: too much work for irq17
>> [ Â 27.131600] serial8250: too much work for irq17
>> [ Â 27.229046] serial8250: too much work for irq17
>> [ Â 27.399664] serial8250: too much work for irq17
>> [ Â 27.570264] serial8250: too much work for irq17
>> [ Â 27.740913] serial8250: too much work for irq17
>> [ Â 27.911498] serial8250: too much work for irq17
>> [ Â 28.082117] serial8250: too much work for irq17
>> [ Â 28.252737] serial8250: too much work for irq17
>> [ Â 28.423371] serial8250: too much work for irq17
>> [ Â 33.175583] serial8250: too much work for irq17
>> [ Â 33.231661] serial8250: too much work for irq17
>> [ Â 33.344017] serial8250: too much work for irq17
>> [ Â 33.400018] serial8250: too much work for irq17
>> [ Â 33.516017] serial8250: too much work for irq17
>> [ Â 33.572016] serial8250: too much work for irq17
>> [ Â 33.687443] serial8250: too much work for irq17
>> [ Â 33.743511] serial8250: too much work for irq17
>> [ Â 33.856016] serial8250: too much work for irq17
>> [ Â 33.912023] serial8250: too much work for irq17
>> [ Â 34.028017] serial8250: too much work for irq17
>> [ Â 34.084016] serial8250: too much work for irq17
>> [ Â 34.199279] serial8250: too much work for irq17
>> [ Â 34.255352] serial8250: too much work for irq17
>> [ Â 34.368016] serial8250: too much work for irq17
>> [ Â 34.424019] serial8250: too much work for irq17
>> [ Â 34.540017] serial8250: too much work for irq17
>> [ Â 34.596019] serial8250: too much work for irq17
>> [ Â 34.711128] serial8250: too much work for irq17
>> [ Â 34.767203] serial8250: too much work for irq17
>> [ Â 34.880017] serial8250: too much work for irq17
>> [ Â 34.936016] serial8250: too much work for irq17
>> [ Â 35.052016] serial8250: too much work for irq17
>> [ Â 35.108014] serial8250: too much work for irq17
>> [ Â 35.220018] serial8250: too much work for irq17
>> [ Â 35.279032] serial8250: too much work for irq17
>> [ Â 35.392015] serial8250: too much work for irq17
>> [ Â 35.448004] serial8250: too much work for irq17
>> [ Â 35.564013] serial8250: too much work for irq17
>> [ Â 35.620017] serial8250: too much work for irq17
>> [ Â 35.732020] serial8250: too much work for irq17
>> [ Â 35.788023] serial8250: too much work for irq17
>> [ Â 35.904015] serial8250: too much work for irq17
>> [ Â 35.960018] serial8250: too much work for irq17
>> [ Â 36.076013] serial8250: too much work for irq17
>> [ Â 36.132015] serial8250: too much work for irq17
>> [ Â 36.244016] serial8250: too much work for irq17
>> [ Â 36.300018] serial8250: too much work for irq17
>> [ Â 36.416015] serial8250: too much work for irq17
>> [ Â 36.472008] serial8250: too much work for irq17
>> [ Â 36.587880] serial8250: too much work for irq17
>> [ Â 36.643962] serial8250: too much work for irq17
>> [ Â 36.756015] serial8250: too much work for irq17
>> [ Â 36.812004] serial8250: too much work for irq17
>> [ Â 36.928015] serial8250: too much work for irq17
>> [ Â 36.984004] serial8250: too much work for irq17
>> [ Â 37.099747] serial8250: too much work for irq17
>> [ Â 37.155816] serial8250: too much work for irq17
>> [ Â 37.268004] serial8250: too much work for irq17
>> [ Â 37.324004] serial8250: too much work for irq17
>> [ Â 37.440015] serial8250: too much work for irq17
>> [ Â 37.496012] serial8250: too much work for irq17
>> [ Â 37.611576] serial8250: too much work for irq17
>> [ Â 37.667649] serial8250: too much work for irq17
>> [ Â 37.780021] serial8250: too much work for irq17
>> [ Â 37.836013] serial8250: too much work for irq17
>> [ Â 37.952019] serial8250: too much work for irq17
>> [ Â 38.008021] serial8250: too much work for irq17
>> [ Â 38.123433] serial8250: too much work for irq17
>> [ Â 38.292018] serial8250: too much work for irq17
>> [ Â 38.464016] serial8250: too much work for irq17
>> [ Â 38.635262] serial8250: too much work for irq17
>> [ Â 38.804014] serial8250: too much work for irq17
>> [ Â 38.976012] serial8250: too much work for irq17
>> [ Â 39.147119] serial8250: too much work for irq17
>> [ Â 39.316023] serial8250: too much work for irq17
>> [ Â 39.488019] serial8250: too much work for irq17
>> [ Â 39.656018] serial8250: too much work for irq17
>> [ Â 39.828017] serial8250: too much work for irq17
>> [ Â 40.000016] serial8250: too much work for irq17
>> [ Â 40.168017] serial8250: too much work for irq17
>> [ Â 40.340018] serial8250: too much work for irq17
>> [ Â 40.512022] serial8250: too much work for irq17
>> [ Â 40.680004] serial8250: too much work for irq17
>> [ Â 40.852018] serial8250: too much work for irq17
>> [ Â 41.023869] serial8250: too much work for irq17
>> [ Â 41.192017] serial8250: too much work for irq17
>> [ Â 41.364017] serial8250: too much work for irq17
>> [ Â 41.535730] serial8250: too much work for irq17
>> [ Â 41.704016] serial8250: too much work for irq17
>> [ Â 41.876012] serial8250: too much work for irq17
>> [ Â 42.047567] serial8250: too much work for irq17
>> [ Â 42.216006] serial8250: too much work for irq17
>> [ Â 42.388003] serial8250: too much work for irq17
>> [ Â 42.559415] serial8250: too much work for irq17
>> [ Â 42.728002] serial8250: too much work for irq17
>> [ Â 42.900016] serial8250: too much work for irq17
>> [ Â 43.071255] serial8250: too much work for irq17
>> [ Â 43.240004] serial8250: too much work for irq17
>> [ Â 43.412003] serial8250: too much work for irq17
>> [ Â 43.583105] serial8250: too much work for irq17
>> [ Â 43.752005] serial8250: too much work for irq17
>> [ Â 43.924003] serial8250: too much work for irq17
>> [ Â 44.092016] serial8250: too much work for irq17
>> [ Â 44.265565] serial8250: too much work for irq17
>> [ Â 44.436019] serial8250: too much work for irq17
>> [ Â 44.604005] serial8250: too much work for irq17
>> [ Â 44.777408] serial8250: too much work for irq17
>> [ Â 44.948034] serial8250: too much work for irq17
>> [ Â 45.118638] serial8250: too much work for irq17
>> [ Â 45.289257] serial8250: too much work for irq17
>> [ Â 45.459874] serial8250: too much work for irq17
>> [ Â 45.630486] serial8250: too much work for irq17
>> [ Â 45.801097] serial8250: too much work for irq17
>> [ Â 45.971724] serial8250: too much work for irq17
>> [ Â 46.142327] serial8250: too much work for irq17
>> [ Â 46.312950] serial8250: too much work for irq17
>> [ Â 46.483557] serial8250: too much work for irq17
>> [ Â 46.654176] serial8250: too much work for irq17
>> [ Â 46.824787] serial8250: too much work for irq17
>> [ Â 46.995409] serial8250: too much work for irq17
>> [ Â 47.166018] serial8250: too much work for irq17
>> [ Â 47.336638] serial8250: too much work for irq17
>> [ Â 47.507240] serial8250: too much work for irq17
>> [ Â 47.677868] serial8250: too much work for irq17
>> [ Â 47.848477] serial8250: too much work for irq17
>> [ Â 48.019098] serial8250: too much work for irq17
>> [ Â 48.189710] serial8250: too much work for irq17
>>
>> Module Â Â Â Â Â Â Â Â ÂSize ÂUsed by
>> binfmt_misc Â Â Â Â Â Â 6599 Â1
>> iptable_nat Â Â Â Â Â Â 3752 Â0
>> nf_nat Â Â Â Â Â Â Â Â 16289 Â1 iptable_nat
>> nf_conntrack_ipv4 Â Â Â10783 Â3 iptable_nat,nf_nat
>> nf_conntrack Â Â Â Â Â 63258 Â3 iptable_nat,nf_nat,nf_conntrack_ipv4
>> nf_defrag_ipv4 Â Â Â Â Â1117 Â1 nf_conntrack_ipv4
>> iptable_mangle Â Â Â Â Â1371 Â0
>> iptable_filter Â Â Â Â Â1302 Â0
>> ip_tables Â Â Â Â Â Â Â10460 Â3 iptable_nat,iptable_mangle,iptable_filter
>> x_tables Â Â Â Â Â Â Â 15921 Â4
>> iptable_nat,iptable_mangle,iptable_filter,ip_tables
>> snd_intel8x0 Â Â Â Â Â 25632 Â2
>> snd_ac97_codec Â Â Â Â 99227 Â1 snd_intel8x0
>> ac97_bus Â Â Â Â Â Â Â Â1014 Â1 snd_ac97_codec
>> i915 Â Â Â Â Â Â Â Â Â290938 Â2
>> snd_pcm Â Â Â Â Â Â Â Â71475 Â2 snd_intel8x0,snd_ac97_codec
>> snd_seq_midi Â Â Â Â Â Â4588 Â0
>> snd_rawmidi Â Â Â Â Â Â17783 Â1 snd_seq_midi
>> drm_kms_helper Â Â Â Â 30200 Â1 i915
>> snd_seq_midi_event Â Â Â6047 Â1 snd_seq_midi
>> snd_seq Â Â Â Â Â Â Â Â47174 Â2 snd_seq_midi,snd_seq_midi_event
>> snd_timer Â Â Â Â Â Â Â19067 Â2 snd_pcm,snd_seq
>> drm Â Â Â Â Â Â Â Â Â 168054 Â3 i915,drm_kms_helper
>> gspca_spca561 Â Â Â Â Â 8594 Â0
>> snd_seq_device Â Â Â Â Â5744 Â3 snd_seq_midi,snd_rawmidi,snd_seq
>> ppdev Â Â Â Â Â Â Â Â Â 5556 Â0
>> gspca_main Â Â Â Â Â Â 23644 Â1 gspca_spca561
>> intel_agp Â Â Â Â Â Â Â26360 Â2 i915
>> videodev Â Â Â Â Â Â Â 43098 Â1 gspca_main
>> snd Â Â Â Â Â Â Â Â Â Â49006 Â11
>> snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
>> parport_pc Â Â Â Â Â Â 26058 Â1
>> v4l1_compat Â Â Â Â Â Â13359 Â1 videodev
>> i2c_algo_bit Â Â Â Â Â Â5168 Â1 i915
>> video Â Â Â Â Â Â Â Â Â18712 Â1 i915
>> soundcore Â Â Â Â Â Â Â Â880 Â1 snd
>> serio_raw Â Â Â Â Â Â Â 4022 Â0
>> snd_page_alloc Â Â Â Â Â7120 Â2 snd_intel8x0,snd_pcm
>> agpgart Â Â Â Â Â Â Â Â32011 Â2 drm,intel_agp
>> output Â Â Â Â Â Â Â Â Â1883 Â1 video
>> lp Â Â Â Â Â Â Â Â Â Â Â7342 Â0
>> joydev Â Â Â Â Â Â Â Â Â8735 Â0
>> parport Â Â Â Â Â Â Â Â31492 Â3 ppdev,parport_pc,lp
>> usbhid Â Â Â Â Â Â Â Â 36882 Â0
>> hid Â Â Â Â Â Â Â Â Â Â67742 Â1 usbhid
>> 8139too Â Â Â Â Â Â Â Â19581 Â0
>> 8139cp Â Â Â Â Â Â Â Â 16934 Â0
>> mii Â Â Â Â Â Â Â Â Â Â 4425 Â2 8139too,8139cp
>>
>> Thank you very much for helping me
>>
>