Nuzzul,
scanModem has detected that your modem is supported through slamr +
ungrab-winmodem
Predictive diagnostics for card in bus 01:09.0:
Modem chipset detected on
NAME="Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem "
CLASS=0703
PCIDEV=163c:3052
SUBSYS=163c:3052
IRQ=17
IDENT=slamr
For candidate modem in: 01:09.0
0703 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem
Primary device ID: 163c:3052
Support type needed or chipset: slamr
There is a package sl-modem-source providing a source code the modem driver ,
If can be searched for at http://pacakges.ubuntu.com. After
downloading install under Linux with:
$ sudo dpkg -i sl*.deb
If DKMS support installed, driver updates with kernel updates will be
automatically done.
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
Download the package
http://packages.ubuntu.com/maverick/sl-modem-source
and install with
$ sudo dpkg -i sl*.deb
If you can install dkms package
Presently install your Linux Distributions dkms package. It provides
for automated driver updates,
following upgrade of your kernel. For details see
http://linux.dell.com/projects.shtml#dkms
Regards,
Antonio
On Tue, Jan 25, 2011 at 2:14 PM, Nuzzul Aswat <nuzzul82@xxxxxxxxx> wrote:
> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.35-22-generic
> With this Subject Line cogent experts will be alerted, and useful
> case names left in the Archive.
> YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
> can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for
> dialup service.
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
> Internet Provider mail filters.
> So in a day, also check the Archived responses at http://www.linmodems.org
> -------------------------- System information ----------------------------
> CPU=i686, Ubuntu , ALSA_version=1.0.23
> Linux version 2.6.35-22-generic (buildd@rothera) (gcc version 4.4.5
> (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:34:50
> UTC 2010
> scanModem update of: 2010_12_12
>
> Distrib_ID=Ubuntu
> DistribCodeName=maverick
> AptRepositoryStem=http://ftp.twaren.net/Linux/Ubuntu/ubuntu/
>
>
> Presently install your Linux Distributions dkms package. It provides
> for automated driver updates,
> following upgrade of your kernel. For details see
> http://linux.dell.com/projects.shtml#dkms
>
> There are no blacklisted modem drivers in /etc/modprobe* files
>
> Potentially useful modem drivers now loaded are:
>
>
> Attached USB devices are:
> ID 1c4f:0003 SiGma Micro HID controller
> ID 1c4f:0002 SiGma Micro
> ID 046d:092f Logitech, Inc. QuickCam Express Plus
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>
> Candidate PCI devices with modem chips are:
> 01:09.0 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem (rev 04)
> High Definition Audio cards can host modem chips.
>
> For candidate card in slot 01:09.0, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 01:09.0 163c:3052 163c:3052 Modem: Smart Link Ltd. SmartLink
> SmartPCI562 56K Modem
>
> Modem interrupt assignment and sharing:
> 17: 186 IO-APIC-fasteoi Intel ICH6, serial
> --- Bootup diagnostics for card in PCI slot 01:09.0 ----
> [ 0.104798] pci 0000:01:09.0: reg 10: [mem 0xfddfe000-0xfddfefff]
> [ 0.104809] pci 0000:01:09.0: reg 14: [io 0xdc00-0xdcff]
> [ 0.104871] pci 0000:01:09.0: PME# supported from D0 D3hot D3cold
> [ 0.104878] pci 0000:01:09.0: PME# disabled
> [ 0.121589] pci 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.245366] serial 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.245539] 0000:01:09.0: ttyS0 at I/O 0xdc08 (irq = 17) is a 16450
> [ 0.245654] 0000:01:09.0: ttyS2 at I/O 0xdc10 (irq = 17) is a 8250
> [ 0.245768] 0000:01:09.0: ttyS3 at I/O 0xdc18 (irq = 17) is a 16450
> [ 0.245812] Couldn't register serial port 0000:01:09.0: -28
>
> The PCI slot 01:09.0 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
> if help is needed.
>
>
> === Finished firmware and bootup diagnostics, next deducing cogent software. ===
>
> Predictive diagnostics for card in bus 01:09.0:
> Modem chipset detected on
> NAME="Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem "
> CLASS=0703
> PCIDEV=163c:3052
> SUBSYS=163c:3052
> IRQ=17
> IDENT=slamr
>
> For candidate modem in: 01:09.0
> 0703 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem
> Primary device ID: 163c:3052
> Support type needed or chipset: slamr
>
>
>
> There is a package sl-modem-source providing a source code the modem driver ,
> If can be searched for at http://pacakge.ubuntu.com. After
> downloading install under Linux with:
> $ sudo dpkg -i sl*.deb
> If DKMS support installed, driver updates with kernel updates will be
> automatically done.
>
> The modem is supported by the Smartlink
> plus the slmodemd helper utility. Read the
> DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
>
>
> For 2.6.35-22-generic compiling drivers is necessary. As of October
> 2007 the current packages at
> http://linmodems.technion.ac.il/packages/smartlink/ are the
> ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
>
> Writing DOCs/Smartlink.txt
> ============ end Smartlink section =====================
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.4.5
> and the compiler used in kernel assembly: 4.4.5
>
> linux-headers-2.6.35-22-generic resources needed for compiling are
> not manifestly ready!
>
> If compiling is necessary packages must be installed, providing:
> linux-headers-2.6.35-22-generic
>
>
> If a driver compilation fails, with message including some lack of
> some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include.
> The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 273248 2010-07-10 00:41 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> For guidance on FAX usage, get from
> http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
> It has samples for a modem using port /dev/ttySL0, which must be
> changed to match your modem's port.
>
>
> Don't worry about the following, it is for experts should trouble
> shooting be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
>
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
> order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
> CPU0
> 0: 47 IO-APIC-edge timer
> 1: 2 IO-APIC-edge i8042
> 7: 0 IO-APIC-edge parport0
> 8: 1 IO-APIC-edge rtc0
> 9: 0 IO-APIC-fasteoi acpi
> 14: 5284 IO-APIC-edge ata_piix
> 15: 470 IO-APIC-edge ata_piix
> 16: 304 IO-APIC-fasteoi uhci_hcd:usb5, i915
> 17: 186 IO-APIC-fasteoi Intel ICH6, serial
> 18: 893 IO-APIC-fasteoi uhci_hcd:usb4
> 19: 0 IO-APIC-fasteoi uhci_hcd:usb3
> 23: 95 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
> NMI: 0 Non-maskable interrupts
> LOC: 12334 Local timer interrupts
> SPU: 0 Spurious interrupts
> PMI: 0 Performance monitoring interrupts
> PND: 0 Performance pending work
> RES: 0 Rescheduling interrupts
> CAL: 0 Function call interrupts
> TLB: 0 TLB shootdowns
> TRM: 0 Thermal event interrupts
> THR: 0 Threshold APIC interrupts
> MCE: 0 Machine check exceptions
> MCP: 1 Machine check polls
> ERR: 0
> MIS: 0
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.35-22-generic (buildd@rothera) (gcc
> version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep
> 19 20:34:50 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4)
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
> [ 0.000000] BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7f0000 (usable)
> [ 0.000000] BIOS-e820: 000000001f7f0000 - 000000001f7f3000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000001f7f3000 - 000000001f800000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> [ 0.000000] NX (Execute Disable) protection: approximated by x86
> segment limits
> [ 0.000000] DMI not present or invalid.
> [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000
> (usable) ==> (reserved)
> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> [ 0.000000] last_pfn = 0x1f7f0 max_arch_pfn = 0x100000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-EFFFF uncachable
> [ 0.000000] F0000-FFFFF write-through
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask FE0000000 write-back
> [ 0.000000] 1 base 01F800000 mask FFF800000 uncachable
> [ 0.000000] 2 disabled
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] e820 update range: 0000000000002000 - 0000000000010000
> (usable) ==> (reserved)
> [ 0.000000] Scanning 1 areas for low memory corruption
> [ 0.000000] modified physical RAM map:
> [ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved)
> [ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable)
> [ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
> [ 0.000000] modified: 0000000000010000 - 0000000000097c00 (usable)
> [ 0.000000] modified: 0000000000097c00 - 00000000000a0000 (reserved)
> [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] modified: 0000000000100000 - 000000001f7f0000 (usable)
> [ 0.000000] modified: 000000001f7f0000 - 000000001f7f3000 (ACPI NVS)
> [ 0.000000] modified: 000000001f7f3000 - 000000001f800000 (ACPI data)
> [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
> [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
> [ 0.000000] initial memory mapped : 0 - 00c00000
> [ 0.000000] found SMP MP-table at [c00f4870] f4870
> [ 0.000000] init_memory_mapping: 0000000000000000-000000001f7f0000
> [ 0.000000] 0000000000 - 0000400000 page 4k
> [ 0.000000] 0000400000 - 001f400000 page 2M
> [ 0.000000] 001f400000 - 001f7f0000 page 4k
> [ 0.000000] kernel direct mapping tables up to 1f7f0000 @ 15000-1a000
> [ 0.000000] RAMDISK: 16ff1000 - 17a34000
> [ 0.000000] ACPI: RSDP 000f8950 00014 (v00 IntelR)
> [ 0.000000] ACPI: RSDT 1f7f3040 00030 (v01 IntelR AWRDACPI 42302E31
> AWRD 00000000)
> [ 0.000000] ACPI: FACP 1f7f30c0 00074 (v01 IntelR AWRDACPI 42302E31
> AWRD 00000000)
> [ 0.000000] ACPI: DSDT 1f7f3180 03F71 (v01 INTELR AWRDACPI 00001000
> MSFT 03000000)
> [ 0.000000] ACPI: FACS 1f7f0000 00040
> [ 0.000000] ACPI: MCFG 1f7f7200 0003C (v01 IntelR AWRDACPI 42302E31
> AWRD 00000000)
> [ 0.000000] ACPI: APIC 1f7f7140 00068 (v01 IntelR AWRDACPI 42302E31
> AWRD 00000000)
> [ 0.000000] ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
> [ 0.000000] ACPI: acpi=force override
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] 0MB HIGHMEM available.
> [ 0.000000] 503MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 1f7f0000
> [ 0.000000] low ram: 0 - 1f7f0000
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000001 -> 0x00001000
> [ 0.000000] Normal 0x00001000 -> 0x0001f7f0
> [ 0.000000] HighMem empty
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[3] active PFN ranges
> [ 0.000000] 0: 0x00000001 -> 0x00000002
> [ 0.000000] 0: 0x00000010 -> 0x00000097
> [ 0.000000] 0: 0x00000100 -> 0x0001f7f0
> [ 0.000000] On node 0 totalpages: 128888
> [ 0.000000] free_area_init_node: node 0, pgdat c07ffd40,
> node_mem_map c1001020
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 3944 pages, LIFO batch:0
> [ 0.000000] Normal zone: 976 pages used for memmap
> [ 0.000000] Normal zone: 123936 pages, LIFO batch:31
> [ 0.000000] Using APIC driver default
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
> [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
> [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000
> [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 1f800000 (gap:
> 1f800000:c0800000)
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2
> nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36416 r0 d20928 u2097152
> [ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
> [ 0.000000] pcpu-alloc: [0] 0 1
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 127880
> [ 0.000000] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic
> root=UUID=b8329912-98de-45bd-8670-4381216c7135 ro quiet splash
> acpi=force pci=routeirq
> [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
> [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] allocated 2580140 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't
> want memory cgroups
> [ 0.000000] Subtract (45 early reservations)
> [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
> [ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS
> [ 0.000000] #3 [0016ff1000 - 0017a34000] RAMDISK
> [ 0.000000] #4 [00009a1000 - 00009a4000] BRK
> [ 0.000000] #5 [00000f4880 - 0000100000] BIOS reserved
> [ 0.000000] #6 [00000f4870 - 00000f4880] MP-table mpf
> [ 0.000000] #7 [0000097c00 - 00000f0c00] BIOS reserved
> [ 0.000000] #8 [00000f0d28 - 00000f4870] BIOS reserved
> [ 0.000000] #9 [00000f0c00 - 00000f0d28] MP-table mpc
> [ 0.000000] #10 [0000010000 - 0000011000] TRAMPOLINE
> [ 0.000000] #11 [0000011000 - 0000015000] ACPI WAKEUP
> [ 0.000000] #12 [0000015000 - 0000016000] PGTABLE
> [ 0.000000] #13 [0001000000 - 0001001000] BOOTMEM
> [ 0.000000] #14 [0001001000 - 00013f1000] BOOTMEM
> [ 0.000000] #15 [00013f1000 - 00013f1004] BOOTMEM
> [ 0.000000] #16 [00013f1040 - 00013f1100] BOOTMEM
> [ 0.000000] #17 [00013f1100 - 00013f1130] BOOTMEM
> [ 0.000000] #18 [00013f1140 - 00013f2940] BOOTMEM
> [ 0.000000] #19 [00013f2940 - 00013f2967] BOOTMEM
> [ 0.000000] #20 [00013f2980 - 00013f2ab4] BOOTMEM
> [ 0.000000] #21 [00013f2ac0 - 00013f2b00] BOOTMEM
> [ 0.000000] #22 [00013f2b00 - 00013f2b40] BOOTMEM
> [ 0.000000] #23 [00013f2b40 - 00013f2b80] BOOTMEM
> [ 0.000000] #24 [00013f2b80 - 00013f2bc0] BOOTMEM
> [ 0.000000] #25 [00013f2bc0 - 00013f2c00] BOOTMEM
> [ 0.000000] #26 [00013f2c00 - 00013f2c40] BOOTMEM
> [ 0.000000] #27 [00013f2c40 - 00013f2c80] BOOTMEM
> [ 0.000000] #28 [00013f2c80 - 00013f2cc0] BOOTMEM
> [ 0.000000] #29 [00013f2cc0 - 00013f2cd0] BOOTMEM
> [ 0.000000] #30 [00013f2d00 - 00013f2d10] BOOTMEM
> [ 0.000000] #31 [00013f2d40 - 00013f2dc2] BOOTMEM
> [ 0.000000] #32 [00013f2e00 - 00013f2e82] BOOTMEM
> [ 0.000000] #33 [0001400000 - 000140e000] BOOTMEM
> [ 0.000000] #34 [0001600000 - 000160e000] BOOTMEM
> [ 0.000000] #35 [00013f4ec0 - 00013f4ec4] BOOTMEM
> [ 0.000000] #36 [00013f4f00 - 00013f4f04] BOOTMEM
> [ 0.000000] #37 [00013f4f40 - 00013f4f48] BOOTMEM
> [ 0.000000] #38 [00013f4f80 - 00013f4f88] BOOTMEM
> [ 0.000000] #39 [00013f4fc0 - 00013f5068] BOOTMEM
> [ 0.000000] #40 [00013f5080 - 00013f50e8] BOOTMEM
> [ 0.000000] #41 [00013f2ec0 - 00013f4ec0] BOOTMEM
> [ 0.000000] #42 [000140e000 - 000144e000] BOOTMEM
> [ 0.000000] #43 [000144e000 - 000146e000] BOOTMEM
> [ 0.000000] #44 [000160e000 - 0001883eac] BOOTMEM
> [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
> [ 0.000000] Memory: 489096k/516032k available (4928k kernel code,
> 26456k reserved, 2336k data, 684k init, 0k highmem)
> [ 0.000000] virtual kernel memory layout:
> [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
> [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 0.000000] vmalloc : 0xdfff0000 - 0xff7fe000 ( 504 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xdf7f0000 ( 503 MB)
> [ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB)
> [ 0.000000] .data : 0xc05d029e - 0xc0818668 (2336 kB)
> [ 0.000000] .text : 0xc0100000 - 0xc05d029e (4928 kB)
> [ 0.000000] Checking if this processor honours the WP bit even in
> supervisor mode...Ok.
> [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3,
> MinObjects=0, CPUs=2, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] RCU-based detection of stalled CPUs is disabled.
> [ 0.000000] Verbose stalled-CPUs detection is disabled.
> [ 0.000000] NR_IRQS:2304 nr_irqs:512
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.000000] Detected 2000.387 MHz processor.
> [ 0.008006] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 4000.77 BogoMIPS (lpj=8001548)
> [ 0.008016] pid_max: default: 32768 minimum: 301
> [ 0.008045] Security Framework initialized
> [ 0.008074] AppArmor: AppArmor initialized
> [ 0.008079] Yama: becoming mindful.
> [ 0.008179] Mount-cache hash table entries: 512
> [ 0.012088] Initializing cgroup subsys ns
> [ 0.012096] Initializing cgroup subsys cpuacct
> [ 0.012105] Initializing cgroup subsys memory
> [ 0.012124] Initializing cgroup subsys devices
> [ 0.012129] Initializing cgroup subsys freezer
> [ 0.012133] Initializing cgroup subsys net_cls
> [ 0.012186] CPU0: Hyper-Threading is disabled
> [ 0.012193] mce: CPU supports 4 MCE banks
> [ 0.012211] CPU0: Thermal monitoring enabled (TM1)
> [ 0.012227] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
> [ 0.012267] ... version: 0
> [ 0.012271] ... bit width: 40
> [ 0.012275] ... generic registers: 18
> [ 0.012279] ... value mask: 000000ffffffffff
> [ 0.012283] ... max period: 0000007fffffffff
> [ 0.012287] ... fixed-purpose events: 0
> [ 0.012291] ... event mask: 000000000003ffff
> [ 0.013897] SMP alternatives: switching to UP code
> [ 0.030477] ACPI: Core revision 20100428
> [ 0.039528] ftrace: converting mcount calls to 0f 1f 44 00 00
> [ 0.039539] ftrace: allocating 21758 entries in 43 pages
> [ 0.040119] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.040477] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.083182] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
> [ 0.084000] Brought up 1 CPUs
> [ 0.084000] Total of 1 processors activated (4000.77 BogoMIPS).
> [ 0.084000] devtmpfs: initialized
> [ 0.084000] regulator: core version 0.5
> [ 0.084000] Time: 13:43:52 Date: 01/22/11
> [ 0.084000] NET: Registered protocol family 16
> [ 0.084000] EISA bus registered
> [ 0.084000] ACPI: bus type pci registered
> [ 0.084000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
> 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.084000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
> [ 0.084000] PCI: Using MMCONFIG for extended config space
> [ 0.084000] PCI: Using configuration type 1 for base access
> [ 0.085207] bio: create slab <bio-0> at 0
> [ 0.086601] ACPI: EC: Look up EC in DSDT
> [ 0.094138] ACPI: Interpreter enabled
> [ 0.094145] ACPI: (supports S0 S1 S4 S5)
> [ 0.094186] ACPI: Using IOAPIC for interrupt routing
> [ 0.102943] ACPI: No dock devices found.
> [ 0.102950] PCI: Using host bridge windows from ACPI; if necessary,
> use "pci=nocrs" and report a bug
> [ 0.103132] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.103476] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
> [ 0.103482] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
> [ 0.103487] pci_root PNP0A08:00: host bridge window [mem
> 0x000a0000-0x000bffff]
> [ 0.103492] pci_root PNP0A08:00: host bridge window [mem
> 0x000c0000-0x000dffff]
> [ 0.103497] pci_root PNP0A08:00: host bridge window [mem
> 0x1f800000-0xfebfffff]
> [ 0.103598] pci 0000:00:02.0: reg 10: [mem 0xfdf00000-0xfdf7ffff]
> [ 0.103607] pci 0000:00:02.0: reg 14: [io 0xff00-0xff07]
> [ 0.103616] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
> [ 0.103624] pci 0000:00:02.0: reg 1c: [mem 0xfdf80000-0xfdfbffff]
> [ 0.103733] pci 0000:00:1d.0: reg 20: [io 0xfe00-0xfe1f]
> [ 0.103800] pci 0000:00:1d.1: reg 20: [io 0xfd00-0xfd1f]
> [ 0.103868] pci 0000:00:1d.2: reg 20: [io 0xfc00-0xfc1f]
> [ 0.103934] pci 0000:00:1d.3: reg 20: [io 0xfb00-0xfb1f]
> [ 0.104011] pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
> [ 0.104075] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.104082] pci 0000:00:1d.7: PME# disabled
> [ 0.104185] pci 0000:00:1e.2: reg 10: [io 0xf000-0xf0ff]
> [ 0.104194] pci 0000:00:1e.2: reg 14: [io 0xfa00-0xfa3f]
> [ 0.104204] pci 0000:00:1e.2: reg 18: [mem 0xfdffe000-0xfdffe1ff]
> [ 0.104213] pci 0000:00:1e.2: reg 1c: [mem 0xfdffd000-0xfdffd0ff]
> [ 0.104252] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
> [ 0.104259] pci 0000:00:1e.2: PME# disabled
> [ 0.104355] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
> [ 0.104365] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by
> ICH6 ACPI/GPIO/TCO
> [ 0.104372] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
> [ 0.104378] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0800-087f
> [ 0.104422] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
> [ 0.104431] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
> [ 0.104441] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
> [ 0.104450] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
> [ 0.104459] pci 0000:00:1f.2: reg 20: [io 0xf800-0xf80f]
> [ 0.104493] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.104499] pci 0000:00:1f.2: PME# disabled
> [ 0.104558] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
> [ 0.104663] pci 0000:01:04.0: reg 10: [io 0xde00-0xdeff]
> [ 0.104674] pci 0000:01:04.0: reg 14: [mem 0xfddff000-0xfddff0ff]
> [ 0.104732] pci 0000:01:04.0: supports D1 D2
> [ 0.104736] pci 0000:01:04.0: PME# supported from D1 D2 D3hot D3cold
> [ 0.104742] pci 0000:01:04.0: PME# disabled
> [ 0.104798] pci 0000:01:09.0: reg 10: [mem 0xfddfe000-0xfddfefff]
> [ 0.104809] pci 0000:01:09.0: reg 14: [io 0xdc00-0xdcff]
> [ 0.104871] pci 0000:01:09.0: PME# supported from D0 D3hot D3cold
> [ 0.104878] pci 0000:01:09.0: PME# disabled
> [ 0.104925] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
> [ 0.104932] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
> [ 0.104939] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
> [ 0.104949] pci 0000:00:1e.0: bridge window [mem
> 0xfde00000-0xfdefffff 64bit pref]
> [ 0.104954] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
> (subtractive decode)
> [ 0.104958] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
> (subtractive decode)
> [ 0.104963] pci 0000:00:1e.0: bridge window [mem
> 0x000a0000-0x000bffff] (subtractive decode)
> [ 0.104968] pci 0000:00:1e.0: bridge window [mem
> 0x000c0000-0x000dffff] (subtractive decode)
> [ 0.104973] pci 0000:00:1e.0: bridge window [mem
> 0x1f800000-0xfebfffff] (subtractive decode)
> [ 0.104985] pci_bus 0000:00: on NUMA node 0
> [ 0.104993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.105245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
> [ 0.119099] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
> [ 0.119277] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11 12 14 15)
> [ 0.119451] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
> [ 0.119625] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
> [ 0.119796] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
> [ 0.119968] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11
> 12 14 15) *0, disabled.
> [ 0.120158] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11
> 12 14 15) *0, disabled.
> [ 0.120333] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
> [ 0.120414] HEST: Table is not found!
> [ 0.120554] vgaarb: device added:
> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.120567] vgaarb: loaded
> [ 0.120896] SCSI subsystem initialized
> [ 0.121014] libata version 3.00 loaded.
> [ 0.121119] usbcore: registered new interface driver usbfs
> [ 0.121143] usbcore: registered new interface driver hub
> [ 0.121189] usbcore: registered new device driver usb
> [ 0.121435] ACPI: WMI: Mapper loaded
> [ 0.121440] PCI: Using ACPI for IRQ routing
> [ 0.121444] PCI: Routing PCI interrupts for all devices because
> "pci=routeirq" specified
> [ 0.121457] alloc irq_desc for 16 on node -1
> [ 0.121461] alloc kstat_irqs on node -1
> [ 0.121475] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.121482] alloc irq_desc for 23 on node -1
> [ 0.121485] alloc kstat_irqs on node -1
> [ 0.121492] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 0.121498] alloc irq_desc for 19 on node -1
> [ 0.121501] alloc kstat_irqs on node -1
> [ 0.121508] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 0.121513] alloc irq_desc for 18 on node -1
> [ 0.121516] alloc kstat_irqs on node -1
> [ 0.121522] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.121531] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
> [ 0.121537] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 0.121543] alloc irq_desc for 17 on node -1
> [ 0.121546] alloc kstat_irqs on node -1
> [ 0.121553] pci 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.121560] pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 0.121567] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 0.121573] alloc irq_desc for 20 on node -1
> [ 0.121577] alloc kstat_irqs on node -1
> [ 0.121582] pci 0000:01:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [ 0.121589] pci 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.121594] PCI: pci_cache_line_size set to 64 bytes
> [ 0.121672] reserve RAM buffer: 0000000000002000 - 000000000000ffff
> [ 0.121677] reserve RAM buffer: 0000000000097c00 - 000000000009ffff
> [ 0.121683] reserve RAM buffer: 000000001f7f0000 - 000000001fffffff
> [ 0.121859] NetLabel: Initializing
> [ 0.121863] NetLabel: domain hash size = 128
> [ 0.121866] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.121894] NetLabel: unlabeled traffic allowed by default
> [ 0.122084] hpet clockevent registered
> [ 0.122090] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> [ 0.122100] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 0.122109] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
> [ 0.128035] Switching to clocksource tsc
> [ 0.146649] AppArmor: AppArmor Filesystem Enabled
> [ 0.146685] pnp: PnP ACPI init
> [ 0.146725] ACPI: bus type pnp registered
> [ 0.151647] pnp: PnP ACPI: found 12 devices
> [ 0.151651] ACPI: ACPI bus type pnp unregistered
> [ 0.151657] PnPBIOS: Disabled by ACPI PNP
> [ 0.151679] system 00:01: [io 0x04d0-0x04d1] has been reserved
> [ 0.151686] system 00:01: [io 0x0800-0x087f] has been reserved
> [ 0.151699] system 00:08: [io 0x0400-0x04bf] could not be reserved
> [ 0.151709] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
> [ 0.151719] system 00:0b: [mem 0x000cae00-0x000cbfff] has been reserved
> [ 0.151725] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
> [ 0.151730] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
> [ 0.151735] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
> [ 0.151741] system 00:0b: [mem 0x1f7f0000-0x1f7fffff] could not be reserved
> [ 0.151746] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
> [ 0.151752] system 00:0b: [mem 0x00100000-0x1f7effff] could not be reserved
> [ 0.151758] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
> [ 0.151763] system 00:0b: [mem 0xfed13000-0xfed1dfff] has been reserved
> [ 0.151768] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
> [ 0.151774] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
> [ 0.151779] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
> [ 0.151784] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
> [ 0.151789] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
> [ 0.189171] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
> [ 0.189181] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
> [ 0.189189] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
> [ 0.189197] pci 0000:00:1e.0: bridge window [mem
> 0xfde00000-0xfdefffff 64bit pref]
> [ 0.189219] pci 0000:00:1e.0: setting latency timer to 64
> [ 0.189227] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 0.189232] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 0.189236] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.189241] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
> [ 0.189245] pci_bus 0000:00: resource 8 [mem 0x1f800000-0xfebfffff]
> [ 0.189250] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
> [ 0.189254] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
> [ 0.189259] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff
> 64bit pref]
> [ 0.189264] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
> [ 0.189268] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
> [ 0.189273] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.189277] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
> [ 0.189282] pci_bus 0000:01: resource 8 [mem 0x1f800000-0xfebfffff]
> [ 0.189348] NET: Registered protocol family 2
> [ 0.189458] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.189799] TCP established hash table entries: 16384 (order: 5,
> 131072 bytes)
> [ 0.189907] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
> [ 0.190015] TCP: Hash tables configured (established 16384 bind 16384)
> [ 0.190019] TCP reno registered
> [ 0.190024] UDP hash table entries: 256 (order: 1, 8192 bytes)
> [ 0.190034] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> [ 0.190149] NET: Registered protocol family 1
> [ 0.190179] pci 0000:00:02.0: Boot video device
> [ 0.190321] PCI: CLS 32 bytes, default 64
> [ 0.190618] cpufreq-nforce2: No nForce2 chipset.
> [ 0.190670] Scanning for low memory corruption every 60 seconds
> [ 0.190939] audit: initializing netlink socket (disabled)
> [ 0.190961] type=2000 audit(1295703832.184:1): initialized
> [ 0.203649] Trying to unpack rootfs image as initramfs...
> [ 0.220092] HugeTLB registered 4 MB page size, pre-allocated 0 pages
> [ 0.228496] VFS: Disk quotas dquot_6.5.2
> [ 0.228650] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.229819] fuse init (API version 7.14)
> [ 0.229982] msgmni has been set to 955
> [ 0.236580] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 253)
> [ 0.236587] io scheduler noop registered
> [ 0.236591] io scheduler deadline registered
> [ 0.236617] io scheduler cfq registered (default)
> [ 0.236821] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.236865] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.237185] input: Power Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> [ 0.237197] ACPI: Power Button [PWRB]
> [ 0.237280] input: Sleep Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
> [ 0.237296] ACPI: Sleep Button [SLPB]
> [ 0.237386] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [ 0.237393] ACPI: Power Button [PWRF]
> [ 0.237796] ACPI: acpi_idle registered with cpuidle
> [ 0.241683] ERST: Table is not found!
> [ 0.244483] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.244686] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 0.245153] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 0.245366] serial 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.245539] 0000:01:09.0: ttyS0 at I/O 0xdc08 (irq = 17) is a 16450
> [ 0.245654] 0000:01:09.0: ttyS2 at I/O 0xdc10 (irq = 17) is a 8250
> [ 0.245768] 0000:01:09.0: ttyS3 at I/O 0xdc18 (irq = 17) is a 16450
> [ 0.245812] Couldn't register serial port 0000:01:09.0: -28
> [ 0.247682] brd: module loaded
> [ 0.248014] isapnp: Scanning for PnP cards...
> [ 0.257148] loop: module loaded
> [ 0.257561] ata_piix 0000:00:1f.2: version 2.13
> [ 0.257594] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 0.257603] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
> [ 0.257678] ata_piix 0000:00:1f.2: setting latency timer to 64
> [ 0.260002] scsi0 : ata_piix
> [ 0.307559] scsi1 : ata_piix
> [ 0.308996] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
> [ 0.309003] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
> [ 0.309771] Fixed MDIO Bus: probed
> [ 0.309844] PPP generic driver version 2.4.2
> [ 0.309971] tun: Universal TUN/TAP device driver, 1.6
> [ 0.309975] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> [ 0.310127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.310174] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 0.310206] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 0.310213] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 0.310286] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
> bus number 1
> [ 0.314230] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> [ 0.320419] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
> [ 0.340183] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 0.340493] hub 1-0:1.0: USB hub found
> [ 0.340504] hub 1-0:1.0: 8 ports detected
> [ 0.340637] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 0.340669] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.340755] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 0.340770] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 0.340776] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 0.340852] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
> bus number 2
> [ 0.340890] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
> [ 0.341107] hub 2-0:1.0: USB hub found
> [ 0.341116] hub 2-0:1.0: 2 ports detected
> [ 0.341204] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 0.341214] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 0.341220] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 0.341289] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
> bus number 3
> [ 0.341344] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
> [ 0.341547] hub 3-0:1.0: USB hub found
> [ 0.341555] hub 3-0:1.0: 2 ports detected
> [ 0.341645] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.341655] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 0.341660] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 0.341724] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
> bus number 4
> [ 0.341771] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
> [ 0.341991] hub 4-0:1.0: USB hub found
> [ 0.341999] hub 4-0:1.0: 2 ports detected
> [ 0.342094] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
> [ 0.342103] uhci_hcd 0000:00:1d.3: setting latency timer to 64
> [ 0.342109] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 0.342181] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
> bus number 5
> [ 0.342227] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
> [ 0.342427] hub 5-0:1.0: USB hub found
> [ 0.342435] hub 5-0:1.0: 2 ports detected
> [ 0.342647] PNP: No PS/2 controller found. Probing ports directly.
> [ 0.456034] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.456290] mice: PS/2 mouse device common for all mice
> [ 0.456567] rtc_cmos 00:03: RTC can wake from S4
> [ 0.456641] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> [ 0.456682] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
> [ 0.456912] device-mapper: uevent: version 1.0.3
> [ 0.460533] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05)
> initialised: dm-devel@xxxxxxxxxx
> [ 0.464431] device-mapper: multipath: version 1.1.1 loaded
> [ 0.464439] device-mapper: multipath round-robin: version 1.0.0 loaded
> [ 0.468346] EISA: Probing bus 0 at eisa.0
> [ 0.468353] EISA: Cannot allocate resource for mainboard
> [ 0.468358] Cannot allocate resource for EISA slot 1
> [ 0.468361] Cannot allocate resource for EISA slot 2
> [ 0.468365] Cannot allocate resource for EISA slot 3
> [ 0.468370] Cannot allocate resource for EISA slot 4
> [ 0.468373] Cannot allocate resource for EISA slot 5
> [ 0.468376] Cannot allocate resource for EISA slot 6
> [ 0.468380] Cannot allocate resource for EISA slot 7
> [ 0.468383] Cannot allocate resource for EISA slot 8
> [ 0.468387] EISA: Detected 0 cards.
> [ 0.472395] cpuidle: using governor ladder
> [ 0.472401] cpuidle: using governor menu
> [ 0.472946] TCP cubic registered
> [ 0.473197] NET: Registered protocol family 10
> [ 0.473819] lo: Disabled Privacy Extensions
> [ 0.474180] NET: Registered protocol family 17
> [ 0.474278] Using IPI No-Shortcut mode
> [ 0.474470] PM: Resume from disk failed.
> [ 0.474497] registered taskstats version 1
> [ 0.474761] Magic number: 11:683:736
> [ 0.474887] rtc_cmos 00:03: setting system clock to 2011-01-22
> 13:43:52 UTC (1295703832)
> [ 0.474893] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 0.474896] EDD information not available.
> [ 0.540842] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S222A, SB01, max UDMA/66
> [ 0.556208] ata2.00: configured for UDMA/66
> [ 0.619465] ata1.00: ATA-7: MAXTOR STM380211AS, 3.AAE, max UDMA/133
> [ 0.619473] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 0.707546] ata1.00: configured for UDMA/133
> [ 0.971500] isapnp: No Plug & Play device found
> [ 0.971760] scsi 0:0:0:0: Direct-Access ATA MAXTOR
> STM380211 3.AA PQ: 0 ANSI: 5
> [ 0.972086] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 0.972354] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks:
> (80.0 GB/74.5 GiB)
> [ 0.972451] sd 0:0:0:0: [sda] Write Protect is off
> [ 0.972457] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.972638] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 0.972869] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW
> SH-S222A SB01 PQ: 0 ANSI: 5
> [ 0.973234] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
> xa/form2 cdda tray
> [ 0.978858] Uniform CD-ROM driver Revision: 3.20
> [ 0.979081] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 0.979204] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [ 0.997557] sda1 sda2 sda3 sda4 < sda5 sda6 >
> [ 1.038252] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.104858] Freeing initrd memory: 10508k freed
> [ 1.118095] Freeing unused kernel memory: 684k freed
> [ 1.119130] Write protecting the kernel text: 4932k
> [ 1.119188] Write protecting the kernel read-only data: 1976k
> [ 1.120082] usb 2-1: new full speed USB device using uhci_hcd and address 2
> [ 1.157022] udev[67]: starting version 163
> [ 1.556196] usb 4-1: new low speed USB device using uhci_hcd and address 2
> [ 1.623784] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> [ 1.623821] 8139cp 0000:01:04.0: This (id 10ec:8139 rev 10) is not
> an 8139C+ compatible chip, use 8139too
> [ 1.635939] 8139too: 8139too Fast Ethernet driver 0.9.28
> [ 1.636047] 8139too 0000:01:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [ 1.638255] 8139too 0000:01:04.0: eth0: RealTek RTL8139 at 0xde00,
> 00:e0:4c:19:1d:a7, IRQ 20
> [ 1.818860] usbcore: registered new interface driver hiddev
> [ 1.832534] input: USB USB Keykoard as
> /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3
> [ 1.832851] generic-usb 0003:1C4F:0002.0001: input,hidraw0: USB HID
> v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.2-1/input0
> [ 2.008025] usb 4-2: new low speed USB device using uhci_hcd and address 3
> [ 2.411058] EXT4-fs (sda2): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 11.679178] Adding 787180k swap on /dev/sda3. Priority:-1
> extents:1 across:787180k
> [ 11.808859] udev[301]: starting version 163
> [ 11.850092] /build/buildd/linux-2.6.35/drivers/hid/usbhid/hid-core.c:
> usb_submit_urb(ctrl) failed
> [ 11.850160] generic-usb 0003:1C4F:0002.0002: timeout initializing reports
> [ 11.850377] input: USB USB Keykoard as
> /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input4
> [ 11.850558] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID
> v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.2-1/input1
> [ 11.864732] input: SIGMACHIP Usb Mouse as
> /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input5
> [ 11.865525] generic-usb 0003:1C4F:0003.0003: input,hidraw2: USB HID
> v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.2-2/input0
> [ 11.865947] usbcore: registered new interface driver usbhid
> [ 11.865953] usbhid: USB HID core driver
> [ 12.038347] lp: driver loaded but no devices found
> [ 12.365245] intel_rng: FWH not detected
> [ 12.640202] Linux agpgart interface v0.103
> [ 12.734031] parport_pc 00:07: reported by Plug and Play ACPI
> [ 12.734085] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> [ 12.931000] agpgart-intel 0000:00:00.0: Intel 915G Chipset
> [ 12.931515] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
> [ 12.935044] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
> [ 12.936629] lp0: using parport0 (interrupt-driven).
> [ 12.964084] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
> [ 12.989744] Linux video capture interface: v2.00
> [ 13.105852] gspca: main v2.9.0 registered
> [ 13.138728] ppdev: user-space parallel port driver
> [ 13.226015] gspca: probing 046d:092f
> [ 13.255353] type=1400 audit(1295675045.274:2): apparmor="STATUS"
> operation="profile_load" name="/sbin/dhclient3" pid=552
> comm="apparmor_parser"
> [ 13.256265] type=1400 audit(1295675045.278:3): apparmor="STATUS"
> operation="profile_load"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=552
> comm="apparmor_parser"
> [ 13.256726] type=1400 audit(1295675045.278:4): apparmor="STATUS"
> operation="profile_load"
> name="/usr/lib/connman/scripts/dhclient-script" pid=552
> comm="apparmor_parser"
> [ 13.287908] input: spca561 as
> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/input/input6
> [ 13.288147] gspca: video0 created
> [ 13.288191] usbcore: registered new interface driver spca561
> [ 13.288195] spca561: registered
> [ 13.429159] [drm] Initialized drm 1.1.0 20060810
> [ 13.671611] EXT3-fs: barriers not enabled
> [ 13.683686] kjournald starting. Commit interval 5 seconds
> [ 13.683932] EXT3-fs (sda5): using internal journal
> [ 13.683944] EXT3-fs (sda5): mounted filesystem with ordered data mode
> [ 13.707229] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 13.707240] i915 0000:00:02.0: setting latency timer to 64
> [ 13.906111] [drm] set up 7M of stolen space
> [ 13.907847] vgaarb: device changed decodes:
> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 13.908334] [drm] initialized overlay support
> [ 13.945070] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 14.175617] nf_conntrack version 0.5.0 (7817 buckets, 31268 max)
> [ 14.178818] CONFIG_NF_CT_ACCT is deprecated and will be removed
> soon. Please use
> [ 14.178826] nf_conntrack.acct=1 kernel parameter, acct=1
> nf_conntrack module option or
> [ 14.178830] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
> [ 14.376554] Console: switching to colour frame buffer device 160x64
> [ 14.383642] fb0: inteldrmfb frame buffer device
> [ 14.383646] drm: registered panic notifier
> [ 14.383752] Slow work thread pool: Starting up
> [ 14.383855] Slow work thread pool: Ready
> [ 14.383874] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [ 14.384252] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level,
> low) -> IRQ 17
> [ 14.384325] Intel ICH 0000:00:1e.2: setting latency timer to 64
> [ 14.716034] intel8x0_measure_ac97_clock: measured 55566 usecs (2678 samples)
> [ 14.716042] intel8x0: clocking to 48000
> [ 16.951761] type=1400 audit(1295675048.970:5): apparmor="STATUS"
> operation="profile_load" name="/usr/share/gdm/guest-session/Xsession"
> pid=900 comm="apparmor_parser"
> [ 16.995166] type=1400 audit(1295675049.014:6): apparmor="STATUS"
> operation="profile_replace" name="/sbin/dhclient3" pid=903
> comm="apparmor_parser"
> [ 16.996064] type=1400 audit(1295675049.018:7): apparmor="STATUS"
> operation="profile_replace"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=903
> comm="apparmor_parser"
> [ 17.005974] type=1400 audit(1295675049.026:8): apparmor="STATUS"
> operation="profile_replace"
> name="/usr/lib/connman/scripts/dhclient-script" pid=903
> comm="apparmor_parser"
> [ 17.045975] type=1400 audit(1295675049.066:9): apparmor="STATUS"
> operation="profile_load" name="/usr/bin/evince" pid=907
> comm="apparmor_parser"
> [ 17.083141] type=1400 audit(1295675049.102:10): apparmor="STATUS"
> operation="profile_load" name="/usr/bin/evince-previewer" pid=907
> comm="apparmor_parser"
> [ 17.099655] type=1400 audit(1295675049.118:11): apparmor="STATUS"
> operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=907
> comm="apparmor_parser"
> [ 20.959986] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
> [ 22.108024] serial8250: too much work for irq17
> [ 22.183768] serial8250: too much work for irq17
> [ 22.280005] serial8250: too much work for irq17
> [ 22.354399] serial8250: too much work for irq17
> [ 22.451833] serial8250: too much work for irq17
> [ 22.524992] serial8250: too much work for irq17
> [ 22.622450] serial8250: too much work for irq17
> [ 22.695616] serial8250: too much work for irq17
> [ 22.793047] serial8250: too much work for irq17
> [ 22.866208] serial8250: too much work for irq17
> [ 22.963675] serial8250: too much work for irq17
> [ 23.036847] serial8250: too much work for irq17
> [ 23.113221] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
> [ 23.132007] serial8250: too much work for irq17
> [ 23.207467] serial8250: too much work for irq17
> [ 23.304025] serial8250: too much work for irq17
> [ 23.376029] serial8250: too much work for irq17
> [ 23.475519] serial8250: too much work for irq17
> [ 23.548690] serial8250: too much work for irq17
> [ 23.644016] serial8250: too much work for irq17
> [ 23.719318] serial8250: too much work for irq17
> [ 23.816749] serial8250: too much work for irq17
> [ 23.888005] serial8250: too much work for irq17
> [ 23.987372] serial8250: too much work for irq17
> [ 24.060549] serial8250: too much work for irq17
> [ 24.157978] serial8250: too much work for irq17
> [ 24.231143] serial8250: too much work for irq17
> [ 24.328584] serial8250: too much work for irq17
> [ 24.401757] serial8250: too much work for irq17
> [ 24.499195] serial8250: too much work for irq17
> [ 24.572370] serial8250: too much work for irq17
> [ 24.669834] serial8250: too much work for irq17
> [ 24.742997] serial8250: too much work for irq17
> [ 24.840413] serial8250: too much work for irq17
> [ 24.913597] serial8250: too much work for irq17
> [ 25.011050] serial8250: too much work for irq17
> [ 25.084215] serial8250: too much work for irq17
> [ 25.181660] serial8250: too much work for irq17
> [ 25.254825] serial8250: too much work for irq17
> [ 25.352283] serial8250: too much work for irq17
> [ 25.425455] serial8250: too much work for irq17
> [ 25.522881] serial8250: too much work for irq17
> [ 25.596048] serial8250: too much work for irq17
> [ 25.693501] serial8250: too much work for irq17
> [ 25.766676] serial8250: too much work for irq17
> [ 25.864115] serial8250: too much work for irq17
> [ 25.937312] serial8250: too much work for irq17
> [ 26.032020] serial8250: too much work for irq17
> [ 26.107929] serial8250: too much work for irq17
> [ 26.204025] serial8250: too much work for irq17
> [ 26.278541] serial8250: too much work for irq17
> [ 26.375968] serial8250: too much work for irq17
> [ 26.449141] serial8250: too much work for irq17
> [ 26.546576] serial8250: too much work for irq17
> [ 26.619746] serial8250: too much work for irq17
> [ 26.717212] serial8250: too much work for irq17
> [ 26.790377] serial8250: too much work for irq17
> [ 26.887795] serial8250: too much work for irq17
> [ 26.960996] serial8250: too much work for irq17
> [ 27.058426] serial8250: too much work for irq17
> [ 27.131600] serial8250: too much work for irq17
> [ 27.229046] serial8250: too much work for irq17
> [ 27.399664] serial8250: too much work for irq17
> [ 27.570264] serial8250: too much work for irq17
> [ 27.740913] serial8250: too much work for irq17
> [ 27.911498] serial8250: too much work for irq17
> [ 28.082117] serial8250: too much work for irq17
> [ 28.252737] serial8250: too much work for irq17
> [ 28.423371] serial8250: too much work for irq17
> [ 33.175583] serial8250: too much work for irq17
> [ 33.231661] serial8250: too much work for irq17
> [ 33.344017] serial8250: too much work for irq17
> [ 33.400018] serial8250: too much work for irq17
> [ 33.516017] serial8250: too much work for irq17
> [ 33.572016] serial8250: too much work for irq17
> [ 33.687443] serial8250: too much work for irq17
> [ 33.743511] serial8250: too much work for irq17
> [ 33.856016] serial8250: too much work for irq17
> [ 33.912023] serial8250: too much work for irq17
> [ 34.028017] serial8250: too much work for irq17
> [ 34.084016] serial8250: too much work for irq17
> [ 34.199279] serial8250: too much work for irq17
> [ 34.255352] serial8250: too much work for irq17
> [ 34.368016] serial8250: too much work for irq17
> [ 34.424019] serial8250: too much work for irq17
> [ 34.540017] serial8250: too much work for irq17
> [ 34.596019] serial8250: too much work for irq17
> [ 34.711128] serial8250: too much work for irq17
> [ 34.767203] serial8250: too much work for irq17
> [ 34.880017] serial8250: too much work for irq17
> [ 34.936016] serial8250: too much work for irq17
> [ 35.052016] serial8250: too much work for irq17
> [ 35.108014] serial8250: too much work for irq17
> [ 35.220018] serial8250: too much work for irq17
> [ 35.279032] serial8250: too much work for irq17
> [ 35.392015] serial8250: too much work for irq17
> [ 35.448004] serial8250: too much work for irq17
> [ 35.564013] serial8250: too much work for irq17
> [ 35.620017] serial8250: too much work for irq17
> [ 35.732020] serial8250: too much work for irq17
> [ 35.788023] serial8250: too much work for irq17
> [ 35.904015] serial8250: too much work for irq17
> [ 35.960018] serial8250: too much work for irq17
> [ 36.076013] serial8250: too much work for irq17
> [ 36.132015] serial8250: too much work for irq17
> [ 36.244016] serial8250: too much work for irq17
> [ 36.300018] serial8250: too much work for irq17
> [ 36.416015] serial8250: too much work for irq17
> [ 36.472008] serial8250: too much work for irq17
> [ 36.587880] serial8250: too much work for irq17
> [ 36.643962] serial8250: too much work for irq17
> [ 36.756015] serial8250: too much work for irq17
> [ 36.812004] serial8250: too much work for irq17
> [ 36.928015] serial8250: too much work for irq17
> [ 36.984004] serial8250: too much work for irq17
> [ 37.099747] serial8250: too much work for irq17
> [ 37.155816] serial8250: too much work for irq17
> [ 37.268004] serial8250: too much work for irq17
> [ 37.324004] serial8250: too much work for irq17
> [ 37.440015] serial8250: too much work for irq17
> [ 37.496012] serial8250: too much work for irq17
> [ 37.611576] serial8250: too much work for irq17
> [ 37.667649] serial8250: too much work for irq17
> [ 37.780021] serial8250: too much work for irq17
> [ 37.836013] serial8250: too much work for irq17
> [ 37.952019] serial8250: too much work for irq17
> [ 38.008021] serial8250: too much work for irq17
> [ 38.123433] serial8250: too much work for irq17
> [ 38.292018] serial8250: too much work for irq17
> [ 38.464016] serial8250: too much work for irq17
> [ 38.635262] serial8250: too much work for irq17
> [ 38.804014] serial8250: too much work for irq17
> [ 38.976012] serial8250: too much work for irq17
> [ 39.147119] serial8250: too much work for irq17
> [ 39.316023] serial8250: too much work for irq17
> [ 39.488019] serial8250: too much work for irq17
> [ 39.656018] serial8250: too much work for irq17
> [ 39.828017] serial8250: too much work for irq17
> [ 40.000016] serial8250: too much work for irq17
> [ 40.168017] serial8250: too much work for irq17
> [ 40.340018] serial8250: too much work for irq17
> [ 40.512022] serial8250: too much work for irq17
> [ 40.680004] serial8250: too much work for irq17
> [ 40.852018] serial8250: too much work for irq17
> [ 41.023869] serial8250: too much work for irq17
> [ 41.192017] serial8250: too much work for irq17
> [ 41.364017] serial8250: too much work for irq17
> [ 41.535730] serial8250: too much work for irq17
> [ 41.704016] serial8250: too much work for irq17
> [ 41.876012] serial8250: too much work for irq17
> [ 42.047567] serial8250: too much work for irq17
> [ 42.216006] serial8250: too much work for irq17
> [ 42.388003] serial8250: too much work for irq17
> [ 42.559415] serial8250: too much work for irq17
> [ 42.728002] serial8250: too much work for irq17
> [ 42.900016] serial8250: too much work for irq17
> [ 43.071255] serial8250: too much work for irq17
> [ 43.240004] serial8250: too much work for irq17
> [ 43.412003] serial8250: too much work for irq17
> [ 43.583105] serial8250: too much work for irq17
> [ 43.752005] serial8250: too much work for irq17
> [ 43.924003] serial8250: too much work for irq17
> [ 44.092016] serial8250: too much work for irq17
> [ 44.265565] serial8250: too much work for irq17
> [ 44.436019] serial8250: too much work for irq17
> [ 44.604005] serial8250: too much work for irq17
> [ 44.777408] serial8250: too much work for irq17
> [ 44.948034] serial8250: too much work for irq17
> [ 45.118638] serial8250: too much work for irq17
> [ 45.289257] serial8250: too much work for irq17
> [ 45.459874] serial8250: too much work for irq17
> [ 45.630486] serial8250: too much work for irq17
> [ 45.801097] serial8250: too much work for irq17
> [ 45.971724] serial8250: too much work for irq17
> [ 46.142327] serial8250: too much work for irq17
> [ 46.312950] serial8250: too much work for irq17
> [ 46.483557] serial8250: too much work for irq17
> [ 46.654176] serial8250: too much work for irq17
> [ 46.824787] serial8250: too much work for irq17
> [ 46.995409] serial8250: too much work for irq17
> [ 47.166018] serial8250: too much work for irq17
> [ 47.336638] serial8250: too much work for irq17
> [ 47.507240] serial8250: too much work for irq17
> [ 47.677868] serial8250: too much work for irq17
> [ 47.848477] serial8250: too much work for irq17
> [ 48.019098] serial8250: too much work for irq17
> [ 48.189710] serial8250: too much work for irq17
>
> Module Size Used by
> binfmt_misc 6599 1
> iptable_nat 3752 0
> nf_nat 16289 1 iptable_nat
> nf_conntrack_ipv4 10783 3 iptable_nat,nf_nat
> nf_conntrack 63258 3 iptable_nat,nf_nat,nf_conntrack_ipv4
> nf_defrag_ipv4 1117 1 nf_conntrack_ipv4
> iptable_mangle 1371 0
> iptable_filter 1302 0
> ip_tables 10460 3 iptable_nat,iptable_mangle,iptable_filter
> x_tables 15921 4
> iptable_nat,iptable_mangle,iptable_filter,ip_tables
> snd_intel8x0 25632 2
> snd_ac97_codec 99227 1 snd_intel8x0
> ac97_bus 1014 1 snd_ac97_codec
> i915 290938 2
> snd_pcm 71475 2 snd_intel8x0,snd_ac97_codec
> snd_seq_midi 4588 0
> snd_rawmidi 17783 1 snd_seq_midi
> drm_kms_helper 30200 1 i915
> snd_seq_midi_event 6047 1 snd_seq_midi
> snd_seq 47174 2 snd_seq_midi,snd_seq_midi_event
> snd_timer 19067 2 snd_pcm,snd_seq
> drm 168054 3 i915,drm_kms_helper
> gspca_spca561 8594 0
> snd_seq_device 5744 3 snd_seq_midi,snd_rawmidi,snd_seq
> ppdev 5556 0
> gspca_main 23644 1 gspca_spca561
> intel_agp 26360 2 i915
> videodev 43098 1 gspca_main
> snd 49006 11
> snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> parport_pc 26058 1
> v4l1_compat 13359 1 videodev
> i2c_algo_bit 5168 1 i915
> video 18712 1 i915
> soundcore 880 1 snd
> serio_raw 4022 0
> snd_page_alloc 7120 2 snd_intel8x0,snd_pcm
> agpgart 32011 2 drm,intel_agp
> output 1883 1 video
> lp 7342 0
> joydev 8735 0
> parport 31492 3 ppdev,parport_pc,lp
> usbhid 36882 0
> hid 67742 1 usbhid
> 8139too 19581 0
> 8139cp 16934 0
> mii 4425 2 8139too,8139cp
>
> Thank you very much for helping me
>
