Hello
Tnx for your last advices.
I configured my modem the way you told me, so I could detect my modem
and dial it.
My modem works well and I've got no problem (it dials the Phone no),
But when it recognizes the provider I dialed, it gives 'No Carrier
Error'.
I use ppp-phone program. Also I unchecked the 'check Carrier', But it
didn't work.
What can I do?
Tnx again
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
Mojtaba Zangeneh, Iran kernel 2.6.35-22-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.23
Linux version 2.6.35-22-generic (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010
scanModem update of: 2010_05_29
Distrib_ID=Ubuntu
DistribCodeName=maverick
AptRepositoryStem=http://ir.archive.ubuntu.com/ubuntu/
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
cdc_acm
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
02:0b.0 Modem: ALi Corporation SmartLink SmartPCI563 56K Modem
High Definition Audio cards can host modem chips.
For candidate card in slot 02:0b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:0b.0 10b9:545a 201f:545a Modem: ALi Corporation SmartLink SmartPCI563 56K Modem
Modem interrupt assignment and sharing:
23: 10 IO-APIC-fasteoi ehci_hcd:usb1
--- Bootup diagnostics for card in PCI slot 02:0b.0 ----
[ 0.097802] pci 0000:02:0b.0: reg 10: [mem 0xff9fe000-0xff9fefff]
[ 0.097810] pci 0000:02:0b.0: reg 14: [io 0xd400-0xd4ff]
[ 0.097852] pci 0000:02:0b.0: PME# supported from D3hot D3cold
[ 0.097856] pci 0000:02:0b.0: PME# disabled
[ 0.222646] serial 0000:02:0b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.223117] 0000:02:0b.0: ttyS2 at I/O 0xd420 (irq = 23) is a 8250
[ 0.223229] 0000:02:0b.0: ttyS3 at I/O 0xd428 (irq = 23) is a 8250
[ 0.223277] Couldn't register serial port 0000:02:0b.0: -28
The PCI slot 02:0b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 02:0b.0:
Modem chipset detected on
NAME="Modem: ALi Corporation SmartLink SmartPCI563 56K Modem"
CLASS=0703
PCIDEV=10b9:545a
SUBSYS=201f:545a
IRQ=23
IDENT=slamr
For candidate modem in: 02:0b.0
0703 Modem: ALi Corporation SmartLink SmartPCI563 56K Modem
Primary device ID: 10b9:545a
Support type needed or chipset: slamr
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
For 2.6.35-22-generic compiling drivers is necessary. As of October 2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/ are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.5
and the compiler used in kernel assembly: 4.4.5
linux-headers-2.6.35-22-generic resources needed for compiling are not manifestly ready!
The patch utility is needed for compiling ALSA drivers, and possibly others.
If compiling is necessary packages must be installed, providing:
linux-headers-2.6.35-22-generic
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273248 2010-07-09 21:11 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
