Joshua,
Please look over the details.
Any suggestions.
Edison,
Joshua is out expert on the 11c1:048c chipset modems.
Currently, there is driver loading and port creation,
but the modem is not responding to the wvdialconf query.
MarvS
---------- Forwarded message ----------
From: Edilson Vieira <edilson.vieira.br@xxxxxxxxx>
Date: Thu, Aug 19, 2010 at 9:55 AM
Subject: Re: help me
To: Linmodems <discuss@xxxxxxxxxxxxx>
Cc: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
Marvin,
I have changed the pci slot of my modem card so there are some
differences in the ModemData.txt. That's why i am attaching it again.
I am attaching the file generated by the agrsm-test program that you
sugests.
Yes, i have used sudo for all commands and the drivers had been loaded
but there was no "announce" of the creation of /dev/ttyAGS3 as
sugested by agrsm_howto.txt
So, everything seems to be ok but it does not run!
Thanks for you attention!
Edilson.
2010/8/18 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
> Edilson,
>
> Please run again
> $ sudo agrsm-test
> and send us the output.
>
> Note that wvdialconf must be run as
> $ sudo wvdialconf
>
> But the drivers should first be loaded:
>
> $ sudo modprobe agrserial
> should suffice and then check for dynamic port creation with:
> $ ls -l /dev/ttySAGR /dev/ttyAGS3
>
> Then run the wvdialconf.
>
> MarvS
> On Wed, Aug 18, 2010 at 8:02 PM, Edilson Vieira
> <edilson.vieira.br@xxxxxxxxx> wrote:
>> Hi Marvin,
>>
>> ok, i did installed the package!
>>
>> it installed ok and detected the supported chipset.
>>
>> but when i try wvdialconf it does not detect the modem!
>>
>> i would like to try the pci=noacpi option found in the agrsm_howto.txt
>> file but my ubuntu does not have such a /boot/grub/menu.lst file and i
>> do not know wich file to edit.
>>
>> any help would be apreciated
>>
>> my kernel is 2.6.32-21-generic ( is this a problem ? )
>>
>> thx!
>>
>> Edilson.
>>
>> 2010/8/18 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>>>
>>> Edison,
>>>
>>> Please send to the List using plain text, not HTML which can harbor viruses
>>>
>>> First install the dkms support package, managing compiling and
>>> automatic updating
>>>
>>> Then for the Agere 11c1:048c chipset,
>>> get from http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>>> agrsm048pci-2.1.60_20100108_i386.deb
>>> agrsm-tools_0.0.1_all.deb
>>> agrsm_howto.txt
>>>
>>> Install with:
>>> $ sudo dpkg -i agrsm*.deb
>>>
>>> MarvS
>>>
>>> On Wed, Aug 18, 2010 at 1:23 PM, Edilson Vieira
>>> <edilson.vieira.br@xxxxxxxxx> wrote:
>>> > Hi there!
>>> >
>>> > scanModem has found a modem card in my system (Agere Systems V.92 56K
>>> > WinModem)
>>> >
>>> > now, wich driver should i use? how do i mount /dev/modem ?
>>> >
>>> > thx very much!
>>> >
>>> > Edilson Vieira
>>> > used to program in c language but serial devices realy hard to me!
>>> >
>>> > 2010/8/14 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>>> >>
>>> >> MP,
>>> >>
>>> >> Please send to the List, not directly to me.
>>> >>
>>> >> If an alternate Internet connection is available to you (ethernet for
>>> >> example),
>>> >> first use the Update-Manager under the Adm drop down list.
>>> >> ALternatively, once on line do;
>>> >> $ sudo apt-get update
>>> >> Then again try
>>> >> $ sudo apt-get wvdial
>>> >>
>>> >> Alternatively start at http://packages.ubuntu.com/lucid/wvdial to
>>> >> download the necessary packages.
>>> >> Most of the dependent package listed will already be on your System.
>>> >> You can also try first installing the newest versions of libuniconf4.4
>>> >> & libiw29
>>> >> which can be searched for at http://packages.ubuntu.com
>>> >>
>>> >> MarvS
>>> >>
>>> >>
>>> >> On Sat, Aug 14, 2010 at 4:16 AM, mohsen pazhoohiyani
>>> >> <mohsenpazhoohiyani@xxxxxxxxx> wrote:
>>> >> > thanks for your help
>>> >> >
>>> >> > i can not install *pppconf* and *wvdial*
>>> >> >
>>> >> > errors:dependency is not satesfiable: libuniconf4.4
>>> >> > dependency is not satesfiable: libiw29
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> > On 8/14/10, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
>>> >> >> MP
>>> >> >>
>>> >> >> From http://www.linuxant.com/drivers/hcf/full/downloads.php#generic
>>> >> >> get the
>>> >> >> hcfpcimodem_1.21full_i386.deb.zip
>>> >> >>
>>> >> >> Under Linux unpack with:
>>> >> >> $ unzip hcfpcimodem*.zip
>>> >> >> Then install with:
>>> >> >> $ sudo dpkg -i hcfpcimodem*.deb
>>> >> >> Subsequently, the modem should be found with
>>> >> >> $ sudo wvdialconf /etc/wvdial.conf
>>> >> >> Edit in your personal information with:
>>> >> >> $ sudo gedit /etc/wvdial.conf
>>> >> >> and try dialing out with:
>>> >> >> $ sudo wvdial.
>>> >> >> See DOCs/Testing.txt for details.
>>> >> >>
>>> >> >> MarvS
>>> >> >>
>>> >> >>
>>> >> >> On Fri, Aug 13, 2010 at 1:23 PM, mohsen pazhoohiyani
>>> >> >> <mohsenpazhoohiyani@xxxxxxxxx> wrote:
>>> >> >>> hi
>>> >> >>>
>>> >> >>> modem model: Zoltrix Smart Spirit 56K
>>> >> >>>
>>> >> >>> i can not install my modem
>>> >> >>>
>>> >> >>>
>>> >> >>>
>>> >> >>> thanks
>>> >> >>>
>>> >> >>
>>> >> >
>>> >> >
>>> >> > --
>>> >> > **MOH3N**
>>> >> >
>>> >
>>> >
>>
>
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.32-21-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.21
Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010
scanModem update of: 2010_05_29
The modem symbolic link is /dev/modem -> /dev/ttyAGS3
Distrib_ID=Ubuntu
DistribCodeName=lucid
AptRepositoryStem=http://br.archive.ubuntu.com/ubuntu/
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel agrmodem agrserial
Attached USB devices are:
ID 1b1a:0000
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
01:05.0 Communication controller: Agere Systems V.92 56K WinModem (rev 02)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
High Definition Audio cards can host modem chips.
For candidate card in slot 01:05.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:05.0 11c1:048c 11c1:044c Communication controller: Agere Systems V.92 56K WinModem
Modem interrupt assignment and sharing:
10: 0 2 IO-APIC-fasteoi nouveau
--- Bootup diagnostics for card in PCI slot 01:05.0 ----
[ 0.188830] pci 0000:01:05.0: reg 10 32bit mmio: [0xfdfff000-0xfdfff0ff]
[ 0.188836] pci 0000:01:05.0: reg 14 io port: [0xcc00-0xcc07]
[ 0.188842] pci 0000:01:05.0: reg 18 io port: [0xc800-0xc8ff]
[ 0.188869] pci 0000:01:05.0: supports D2
[ 0.188871] pci 0000:01:05.0: PME# supported from D2 D3hot
[ 0.188875] pci 0000:01:05.0: PME# disabled
[ 211.149771] agrsm 0000:01:05.0: PCI->APIC IRQ transform: INT A -> IRQ 10
The PCI slot 01:05.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:05.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:05.0 10de:03f0 1019:a88d Audio device: nVidia Corporation MCP61 High Definition Audio
Modem interrupt assignment and sharing:
5: 183 621 IO-APIC-fasteoi ehci_hcd:usb1, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:05.0 ----
[ 0.188395] pci 0000:00:05.0: reg 10 32bit mmio: [0xfe028000-0xfe02bfff]
[ 0.188420] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.188423] pci 0000:00:05.0: PME# disabled
[ 6.066757] HDA Intel 0000:00:05.0: PCI->APIC IRQ transform: INT B -> IRQ 5
[ 6.066796] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 7.224095] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
The PCI slot 00:05.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 01:05.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems V.92 56K WinModem "
CLASS=0780
PCIDEV=11c1:048c
SUBSYS=11c1:044c
IRQ=10
HDA2=00:05.0
IDENT=agrsm
For candidate modem in: 01:05.0
0780 Communication controller: Agere Systems V.92 56K WinModem
Primary device ID: 11c1:048c
Support type needed or chipset: agrsm
The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair.
There are a few different chipsets which use this driver pair, but they use different code resources:
Chipsets KV* PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb or agrsm048pci-2.1.60_20100108.tar.gz
11c1:0620 2.6.31 agrsm06pci-2.1.80_20100106_i386.deb or agrsm06pci-2.1.80~20100106.tar.gz !!
11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Additionally there are;
automation & testing agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to Nikolay Zhuravlev
But see conflict issue: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
For the 11c11040 chip with kernels 2.6.31 and later a change in a modules loading settingmay be necessary.
Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for your Distro), change the phrase:
options snd-hda-intel power_save=10
to:
options snd-hda-intel power_save=0
or the agrsm drivers will not function. For Ubuntu related systems this can be done with:
$ sudo gedit /etc/modprobe.d/alsa-base.conf
Report from Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.
All of the above packages are dkms competent. This means that if your Linux distros dkms package
is previously installed, if provides for future updates matching forthcoming kernels.
-------------- end Agere Systems section -------------------
Predictive diagnostics for card in bus 00:05.0:
Modem chipset not detected on
NAME="Audio device: nVidia Corporation MCP61 High Definition Audio "
CLASS=0403
PCIDEV=10de:03f0
SUBSYS=1019:a88d
IRQ=5
For candidate modem in: 00:05.0
0403 Audio device: nVidia Corporation MCP61 High Definition Audio
Primary device ID: 10de:03f0
Support type needed or chipset:
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.3
and the compiler used in kernel assembly: 4.4.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.32-21-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 12 2010-08-18 21:15 /dev/modem -> /dev/ttyAGS3
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
Loading drivers:
Drivers loaded:
agrserial 9273 0
agrmodem 1183595 1 agrserial
and symbolic link created:
lrwxrwxrwx 1 root root 12 2010-08-19 10:43 /dev/ttySAGR -> /dev/ttyAGS3
Checking for utility wvdialconf
Found /usr/bin/wvdialconf, preparing to run:
wvdialconf /etc/wvdial.conf
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
ttySAGR<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttySAGR<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttySAGR<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
A reboot may be necessary before modem detection through:
sudo modprobe agrserial
Which will load agrmodem, agrserial and create the symbolic link needed for:
sudo wvdialconf
The installation record has been written to ./agrsm-test.txt
