PPP auth failed after connection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Following the instructions on linmodems.org, and using the generic driver 
recommended (my specific ubuntu 10.04 kernel is not listed, so I installed the 
generic), I have got the winmodem dialling and connecting, but then it drops out 

because of a PPP problem. Any tips about fixing this? The ppp options file nas 
"noauth" set. Here's the log from Gnome PPP (I get the same info if using wvdial 

direct):

--> WvDial: Internet dialer version 1.60
--> Cannot set information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATM1L3DT08456600923
--> Waiting for carrier.
ATM1L3DT08456600923
CONNECT 460800 
--> Carrier  detected.  Waiting for prompt.
User Access Verification
login:
--> Looks like a login prompt.
--> Sending: chandler5@xxxxxxx
chandler5@xxxxxxx
Password: 
--> Looks like a password prompt.
--> Sending: (password)
PPP authorization failed.
--> Connected, but carrier signal lost!  Retrying...
--> Sending: ATM1L3DT08456600923
--> Waiting for carrier.
NO CARRIER

Thanks, Ray



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux