Ray, There are several options that are mutually exclusive. You may have that case, Can you send us what is in /etc/ppp/options, post output of $ cat /etc/ppp/options and also try to read Jacques' excellent troubleshooting guide: http://linmodems.technion.ac.il/post-install.html Regards, Antonio On Tue, Aug 3, 2010 at 1:55 AM, Ray Chandler <chandler3@xxxxxxx> wrote: > Following the instructions on linmodems.org, and using the generic driver > recommended (my specific ubuntu 10.04 kernel is not listed, so I installed the > generic), I have got the winmodem dialling and connecting, but then it drops out > > because of a PPP problem. Any tips about fixing this? The ppp options file nas > "noauth" set. Here's the log from Gnome PPP (I get the same info if using wvdial > > direct): > > --> WvDial: Internet dialer version 1.60 > --> Cannot set information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATM1L3DT08456600923 > --> Waiting for carrier. > ATM1L3DT08456600923 > CONNECT 460800 > --> Carrier detected. Waiting for prompt. > User Access Verification > login: > --> Looks like a login prompt. > --> Sending: chandler5@xxxxxxx > chandler5@xxxxxxx > Password: > --> Looks like a password prompt. > --> Sending: (password) > PPP authorization failed. > --> Connected, but carrier signal lost! Retrying... > --> Sending: ATM1L3DT08456600923 > --> Waiting for carrier. > NO CARRIER > > Thanks, Ray >
