barb, usa, installation of dialup pci HELP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: 	someone <mrleviguy@xxxxxxxxx>
To: 	Discuss@xxxxxxxxxxxxx
Subject: 	Barb, USA, installation of dialup pci  HELP
Date: 	07/08/2010 01:19:31 PM
I am trying to build computers to give to the poor with free internet service.  Need Dialup Modem 

I am such a Ubuntu Newby that I can't get the qunzip scanmodem.gz to
work/install (installed Gzip but still can't use gunzip)  I am really
over my head but have been trying to learn to use the terminal for about 37 hours to get the dialup modem to work.   I have installed / ran lots of tries (apts ?) should I reinstall Ubuntu (some how I now have Kubuntu?)
I am quick to learn but most of what I read and reread on the internet made ASSumptions that I knew where to start or finish.
I think I just found the Root   from Applications > Programs >  is this THE Root??

anyway 

from the physical PCI card it reads F-1156iv/A3   
IF THIS IS NOT A GOOD ENOUGH pci card
 -let me know and I will install another then contact you again with the new cards ID

I have sent you 3 different looks at my system. the bottom is lshw modem
only

If you still need the ScanModem  please explain how I can get it unzipped
I do thank you for being there!!!!!
 
 description: Computer
    width: 32 bits
  *-core
       description: Motherboard
       physical id: 0
     *-memory
          description: System memory
          physical id: 0
          size: 243MiB
     *-cpu
          product: Pentium III (Coppermine)
          vendor: Intel Corp.
          physical id: 1
          bus info: cpu@0
          version: 6.8.6
          size: 1GHz
          width: 32 bits
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce
cx8 mtrr pge mca cmov pse36 mmx fxsr sse up
        *-cache:0
             description: L1 cache
             physical id: 0
             size: 32KiB
        *-cache:1
             description: L2 cache
             physical id: 1
             size: 256KiB
     *-pci
          description: Host bridge
          product: 82815 815 Chipset Host Bridge and Memory Controller
Hub
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 02
          width: 32 bits
          clock: 33MHz
          configuration: driver=agpgart-intel
          resources: irq:0
        *-display UNCLAIMED
             description: VGA compatible controller
             product: 82815 Chipset Graphics Controller (CGC)
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 02
             width: 32 bits
             clock: 66MHz
             capabilities: bus_master cap_list
             configuration: latency=0
             resources: memory:f0000000-f3ffffff(prefetchable)
memory:ec000000-ec07ffff
        *-pci
             description: PCI bridge
             product: 82801AA PCI Bridge
             vendor: Intel Corporation
             physical id: 1e
             bus info: pci@0000:00:1e.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pci bus_master
             resources: ioport:2000(size=4096) memory:ec100000-ec1fffff
memory:10000000-100fffff(prefetchable)
           *-communication UNCLAIMED
                description: Communication controller
                product: LT WinModem
                vendor: Agere Systems
                physical id: 1
                bus info: pci@0000:01:01.0
                version: 00
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: latency=64 maxlatency=14 mingnt=252
                resources: memory:ec100000-ec1000ff ioport:2480(size=8)
ioport:2000(size=256)
           *-network
                description: Ethernet interface
                product: 3c905C-TX/TX-M [Tornado]
                vendor: 3Com Corporation
                physical id: 4
                bus info: pci@0000:01:04.0
                logical name: eth0
                version: 78
                serial: 00:04:75:39:96:45
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list rom ethernet physical
                configuration: broadcast=yes driver=3c59x
ip=192.168.1.101 latency=80 maxlatency=10 mingnt=10 multicast=yes
                resources: irq:5 ioport:2400(size=128)
memory:ec100400-ec10047f memory:10000000-1001ffff(prefetchable)
        *-isa
             description: ISA bridge
             product: 82801AA ISA Bridge (LPC)
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master
             configuration: latency=0
        *-ide
             description: IDE interface
             product: 82801AA IDE Controller
             vendor: Intel Corporation
             physical id: 1f.1
             bus info: pci@0000:00:1f.1
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: ide bus_master
             configuration: driver=ata_piix latency=0
             resources: irq:0 ioport:1f0(size=8) ioport:3f6
ioport:170(size=8) ioport:376 ioport:1800(size=16)
        *-usb
             description: USB Controller
             product: 82801AA USB Controller
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: bus_master
             configuration: driver=uhci_hcd latency=0
             resources: irq:11 ioport:1820(size=32)
        *-serial UNCLAIMED
             description: SMBus
             product: 82801AA SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 02
             width: 32 bits
             clock: 33MHz
             configuration: latency=0
             resources: ioport:1810(size=16)
        *-multimedia
             description: Multimedia audio controller
             product: 82801AA AC'97 Audio Controller
             vendor: Intel Corporation
             physical id: 1f.5
             bus info: pci@0000:00:1f.5
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: bus_master
             configuration: driver=Intel ICH latency=0
             resources: irq:9 ioport:1200(size=256) ioport:1300(size=64)

AND


someone@someone-desktop:~$  lspci -vv
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and
Memory Controller Hub (rev 02)
        Subsystem: Intel Corporation 82815 815 Chipset Host Bridge and Memory
Controller Hub
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel
        Kernel modules: intel-agp

00:02.0 VGA compatible controller: Intel Corporation 82815 Chipset
Graphics Controller (CGC) (rev 02)
        Subsystem: Hewlett-Packard Company Device 1245
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
        Region 1: Memory at ec000000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: <access denied>

00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: ec100000-ec1fffff
        Prefetchable memory behind bridge: 10000000-100fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Kernel modules: shpchp

00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02)
(prog-if 80 [Master])
        Subsystem: Intel Corporation 82801AA IDE Controller
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
        Region 4: I/O ports at 1800 [size=16]
        Kernel driver in use: ata_piix

00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev
02)
        Subsystem: Intel Corporation 82801AA USB Controller
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 11
        Region 4: I/O ports at 1820 [size=32]
        Kernel driver in use: uhci_hcd

00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)
        Subsystem: Intel Corporation 82801AA SMBus Controller
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 9
        Region 4: I/O ports at 1810 [size=16]
        Kernel modules: i2c-i801

00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97
Audio Controller (rev 02)
        Subsystem: Hewlett-Packard Company Device 1249
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 9
        Region 0: I/O ports at 1200 [size=256]
        Region 1: I/O ports at 1300 [size=64]
        Kernel driver in use: Intel ICH
        Kernel modules: snd-intel8x0

01:01.0 Communication controller: Agere Systems LT WinModem
        Subsystem: GVC Corporation Device 0405
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (63000ns min, 3500ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at ec100000 (32-bit, non-prefetchable) [size=256]
        Region 1: I/O ports at 2480 [size=8]
        Region 2: I/O ports at 2000 [size=256]
        Capabilities: <access denied>

01:04.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
(rev 78)
        Subsystem: Hewlett-Packard Company Device 1246
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at 2400 [size=128]
        Region 1: Memory at ec100400 (32-bit, non-prefetchable) [size=128]
        [virtual] Expansion ROM at 10000000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: 3c59x
        Kernel modules: 3c59x



someone@someone-desktop:~$  lspci -vv

*-communication UNCLAIMED
                description: Communication controller
                product: LT WinModem
                vendor: Agere Systems
                physical id: 1
                bus info: pci@0000:01:01.0
                version: 00
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: latency=64 maxlatency=14 mingnt=252
                resources: memory:ec100000-ec1000ff ioport:2480(size=8)
ioport:2









____________________________________________________________
Penny Stock Jumping 2000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.netzero.net/TGL3241/4c363758b99cb225363st02vuc



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux