Hello friends
I have a Dell laptop(Inspiron 1525) with an internal modem, but I
don't know its manufacture(Intel? Conexant? or ...).
I read in the ModemData.txt that I should send dmesg.txt too.
I would appreciate any comment that led me to the solution!
Thanks in advance
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.32-22-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.21
Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010
scanModem update of: 2010_05_29
Distrib_ID=Ubuntu
DistribCodeName=lucid
AptRepositoryStem=http://ir.archive.ubuntu.com/ubuntu/
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 0a5c:4503 Broadcom Corp.
ID 0a5c:4502 Broadcom Corp.
ID 413c:8126 Dell Computer Corp. Wireless 355 Bluetooth
ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
ID 05a9:2640 OmniVision Technologies, Inc. OV2640 Webcam
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 1028:022f Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
21: 106 2437 IO-APIC-fasteoi uhci_hcd:usb4, uhci_hcd:usb6, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.249892] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
[ 0.249955] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.249960] pci 0000:00:1b.0: PME# disabled
[ 7.865184] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 7.865209] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.291453] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
[ 8.508275] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.508357] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 8.508410] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 3
00-03: INTEL HDMI : INTEL HDMI : playback 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfe9fc000 irq 21
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.32-21-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.32-22-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The HDA diagnostics did not recognize a modem chip on the audio subsystem,
though a Conexant chip modem might not be recognized.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1028:022f
IRQ=21
HDA2=00:1b.0
SOFT=8086:284b.HDA
ArchivedChip=0x14f12bfa
CodecClass=14f1
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 1028:022f
Softmodem codec or chipset from diagnostics:
from Archives: 0x14f12bfa
Support type needed or chipset: hsfmodem
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@xxxxxxxxxxxx>
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.06full_k2.6.32_22_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
The directions following below need only be pursued, if the above procedures are not adequate.
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.32_22_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, the needed drivers
will be auto compiled anyway. Alternatively, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.3
and the compiler used in kernel assembly: 4.4.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.32-22-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273312 2010-03-07 07:29 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0 CPU1
0: 308124 380254 IO-APIC-edge timer
1: 8472 1876 IO-APIC-edge i8042
8: 0 1 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 109364 21903 IO-APIC-edge i8042
14: 8438 9024 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 2 0 IO-APIC-fasteoi ohci1394
17: 23397 102428 IO-APIC-fasteoi eth1
18: 0 0 IO-APIC-fasteoi mmc0
20: 0 2 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb5
21: 106 2437 IO-APIC-fasteoi uhci_hcd:usb4, uhci_hcd:usb6, HDA Intel
22: 170 150 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb7
27: 1 0 PCI-MSI-edge sky2@pci:0000:09:00.0
28: 27973 4236 PCI-MSI-edge ahci
29: 61515 758 PCI-MSI-edge i915
NMI: 0 0 Non-maskable interrupts
LOC: 269748 132878 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 9702 6267 Rescheduling interrupts
CAL: 58 126 Function call interrupts
TLB: 1129 501 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 14 14 Machine check polls
ERR: 1
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf66d800 (usable)
[ 0.000000] BIOS-e820: 00000000bf66d800 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbf66d max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf66d800 (usable)
[ 0.000000] modified: 00000000bf66d800 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37856000 - 37fef711
[ 0.000000] Allocated new RAMDISK: 008de000 - 01077711
[ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef710 to 008de000 - 01077710
[ 0.000000] ACPI: RSDP 000fbc60 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT bf66f200 00064 (v01 DELL M08 27D8061B ASL 00000061)
[ 0.000000] ACPI: FACP bf66f09c 000F4 (v04 DELL M08 27D8061B ASL 00000061)
[ 0.000000] ACPI: DSDT bf66f800 05477 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[ 0.000000] ACPI: FACS bf67e000 00040
[ 0.000000] ACPI: HPET bf66f300 00038 (v01 DELL M08 00000001 ASL 00000061)
[ 0.000000] ACPI: APIC bf66f400 00068 (v01 DELL M08 27D8061B ASL 00000047)
[ 0.000000] ACPI: MCFG bf66f3c0 0003E (v16 DELL M08 27D8061B ASL 00000061)
[ 0.000000] ACPI: SLIC bf66f49c 00176 (v01 DELL M08 27D8061B ASL 00000061)
[ 0.000000] ACPI: OSFR bf66ea00 0002C (v01 DELL M08 27D8061B ASL 00000061)
[ 0.000000] ACPI: BOOT bf66efc0 00028 (v01 DELL M08 27D8061B ASL 00000061)
[ 0.000000] ACPI: SSDT bf66d97e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2174MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd184] BRK ==> [00008da000 - 00008dd184]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008de000 - 0001077711] NEW RAMDISK ==> [00008de000 - 0001077711]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bf66d
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf66d
[ 0.000000] On node 0 totalpages: 783880
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1079000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4349 pages used for memmap
[ 0.000000] HighMem zone: 552306 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36024 r0 d21320 u2097152
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777755
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-22-generic root=UUID=8f17c288-d90a-464f-8482-a2feac550e35 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 15679620 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bf66d)
[ 0.000000] Memory: 3077840k/3135924k available (4673k kernel code, 56672k reserved, 2121k data, 656k init, 2226620k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590663 - 0xc07a2e48 (2121 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590663 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2393.707 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.41 BogoMIPS (lpj=9574828)
[ 0.004022] Security Framework initialized
[ 0.004041] AppArmor: AppArmor initialized
[ 0.004047] Mount-cache hash table entries: 512
[ 0.004161] Initializing cgroup subsys ns
[ 0.004165] Initializing cgroup subsys cpuacct
[ 0.004169] Initializing cgroup subsys memory
[ 0.004175] Initializing cgroup subsys devices
[ 0.004177] Initializing cgroup subsys freezer
[ 0.004179] Initializing cgroup subsys net_cls
[ 0.004197] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004199] CPU: L2 cache: 3072K
[ 0.004202] CPU: Physical Processor ID: 0
[ 0.004203] CPU: Processor Core ID: 0
[ 0.004206] mce: CPU supports 6 MCE banks
[ 0.004214] CPU0: Thermal monitoring enabled (TM2)
[ 0.004217] using mwait in idle threads.
[ 0.004224] Performance Events: Core2 events, Intel PMU driver.
[ 0.004231] ... version: 2
[ 0.004233] ... bit width: 40
[ 0.004234] ... generic registers: 2
[ 0.004236] ... value mask: 000000ffffffffff
[ 0.004237] ... max period: 000000007fffffff
[ 0.004239] ... fixed-purpose events: 3
[ 0.004240] ... event mask: 0000000700000003
[ 0.004244] Checking 'hlt' instruction... OK.
[ 0.022500] ACPI: Core revision 20090903
[ 0.032009] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.032013] ftrace: allocating 21771 entries in 43 pages
[ 0.036051] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078076] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.164068] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
[ 0.164079] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168016] Brought up 2 CPUs
[ 0.168018] Total of 2 processors activated (9575.36 BogoMIPS).
[ 0.168596] CPU0 attaching sched-domain:
[ 0.168599] domain 0: span 0-1 level MC
[ 0.168602] groups: 0 1
[ 0.168607] CPU1 attaching sched-domain:
[ 0.168609] domain 0: span 0-1 level MC
[ 0.168610] groups: 1 0
[ 0.168698] devtmpfs: initialized
[ 0.168698] regulator: core version 0.5
[ 0.168698] Time: 6:40:32 Date: 06/23/10
[ 0.168698] NET: Registered protocol family 16
[ 0.168698] Trying to unpack rootfs image as initramfs...
[ 0.168698] EISA bus registered
[ 0.168698] ACPI: bus type pci registered
[ 0.168698] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.168698] PCI: MCFG area at f8000000 reserved in E820
[ 0.168698] PCI: Using MMCONFIG for extended config space
[ 0.168698] PCI: Using configuration type 1 for base access
[ 0.172084] bio: create slab <bio-0> at 0
[ 0.172813] ACPI: EC: Look up EC in DSDT
[ 0.195325] ACPI: Interpreter enabled
[ 0.195334] ACPI: (supports S0 S3 S4 S5)
[ 0.195353] ACPI: Using IOAPIC for interrupt routing
[ 0.233962] ACPI: No dock devices found.
[ 0.249359] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.249460] pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff]
[ 0.249467] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.249472] pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff]
[ 0.249510] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
[ 0.249622] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
[ 0.249689] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
[ 0.249763] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[ 0.249830] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.249836] pci 0000:00:1a.7: PME# disabled
[ 0.249892] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
[ 0.249955] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.249960] pci 0000:00:1b.0: PME# disabled
[ 0.250057] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.250062] pci 0000:00:1c.0: PME# disabled
[ 0.250163] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.250168] pci 0000:00:1c.1: PME# disabled
[ 0.250270] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.250275] pci 0000:00:1c.4: PME# disabled
[ 0.250341] pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
[ 0.250407] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
[ 0.250479] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[ 0.250551] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[ 0.250616] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.250621] pci 0000:00:1d.7: PME# disabled
[ 0.250802] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.250807] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
[ 0.250811] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[ 0.250815] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007)
[ 0.250819] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[ 0.250874] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.250882] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.250890] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.250898] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.250906] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
[ 0.250983] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
[ 0.250991] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
[ 0.250998] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
[ 0.251006] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
[ 0.251014] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff]
[ 0.251022] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb800-0xfe9fbfff]
[ 0.251065] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.251069] pci 0000:00:1f.2: PME# disabled
[ 0.251103] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fb700-0xfe9fb7ff]
[ 0.251128] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
[ 0.251236] pci 0000:09:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff]
[ 0.251247] pci 0000:09:00.0: reg 18 io port: [0xde00-0xdeff]
[ 0.251338] pci 0000:09:00.0: supports D1 D2
[ 0.251340] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.251347] pci 0000:09:00.0: PME# disabled
[ 0.251428] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.251432] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.251644] pci 0000:0b:00.0: reg 10 64bit mmio: [0xfe7fc000-0xfe7fffff]
[ 0.251864] pci 0000:0b:00.0: supports D1 D2
[ 0.251866] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
[ 0.251878] pci 0000:0b:00.0: PME# disabled
[ 0.252028] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
[ 0.252098] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 0.252102] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe400000-0xfe6fffff]
[ 0.252111] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
[ 0.252173] pci 0000:02:09.0: reg 10 32bit mmio: [0xfe3ff800-0xfe3fffff]
[ 0.252234] pci 0000:02:09.0: supports D1 D2
[ 0.252236] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.252241] pci 0000:02:09.0: PME# disabled
[ 0.252285] pci 0000:02:09.1: reg 10 32bit mmio: [0xfe3ff400-0xfe3ff4ff]
[ 0.252347] pci 0000:02:09.1: supports D1 D2
[ 0.252348] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.252354] pci 0000:02:09.1: PME# disabled
[ 0.252400] pci 0000:02:09.2: reg 10 32bit mmio: [0xfe3ff500-0xfe3ff5ff]
[ 0.252463] pci 0000:02:09.2: supports D1 D2
[ 0.252465] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.252469] pci 0000:02:09.2: PME# disabled
[ 0.252512] pci 0000:02:09.3: reg 10 32bit mmio: [0xfe3ff600-0xfe3ff6ff]
[ 0.252575] pci 0000:02:09.3: supports D1 D2
[ 0.252577] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.252582] pci 0000:02:09.3: PME# disabled
[ 0.252626] pci 0000:02:09.4: reg 10 32bit mmio: [0xfe3ff700-0xfe3ff7ff]
[ 0.252689] pci 0000:02:09.4: supports D1 D2
[ 0.252691] pci 0000:02:09.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.252696] pci 0000:02:09.4: PME# disabled
[ 0.252753] pci 0000:00:1e.0: transparent bridge
[ 0.252761] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff]
[ 0.252795] pci_bus 0000:00: on NUMA node 0
[ 0.252799] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.253021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.253132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.253195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.253261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.264284] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.264387] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.264487] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
[ 0.264579] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
[ 0.264680] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.264785] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.264892] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.264984] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.265100] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.265114] vgaarb: loaded
[ 0.265220] SCSI subsystem initialized
[ 0.265307] libata version 3.00 loaded.
[ 0.265377] usbcore: registered new interface driver usbfs
[ 0.265387] usbcore: registered new interface driver hub
[ 0.265413] usbcore: registered new device driver usb
[ 0.265542] ACPI: WMI: Mapper loaded
[ 0.265544] PCI: Using ACPI for IRQ routing
[ 0.265810] NetLabel: Initializing
[ 0.265812] NetLabel: domain hash size = 128
[ 0.265813] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.265825] NetLabel: unlabeled traffic allowed by default
[ 0.265854] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.265858] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.268082] Switching to clocksource tsc
[ 0.269796] AppArmor: AppArmor Filesystem Enabled
[ 0.269806] pnp: PnP ACPI init
[ 0.269817] ACPI: bus type pnp registered
[ 0.286012] pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.286016] pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.286101] pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.286104] pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.286107] pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.286109] pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
[ 0.303866] pnp: PnP ACPI: found 13 devices
[ 0.303869] ACPI: ACPI bus type pnp unregistered
[ 0.303872] PnPBIOS: Disabled by ACPI PNP
[ 0.303885] system 00:01: iomem range 0xff800000-0xff8fffff has been reserved
[ 0.303888] system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved
[ 0.303895] system 00:06: ioport range 0xc80-0xcff could not be reserved
[ 0.303902] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.303907] system 00:0a: ioport range 0x900-0x97f has been reserved
[ 0.303909] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.303915] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
[ 0.303917] system 00:0b: ioport range 0x1080-0x10bf has been reserved
[ 0.303919] system 00:0b: ioport range 0x10c0-0x10df has been reserved
[ 0.303922] system 00:0b: ioport range 0x809-0x809 has been reserved
[ 0.303927] system 00:0c: iomem range 0x0-0x9efff could not be reserved
[ 0.303930] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
[ 0.303932] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.303934] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.303937] system 00:0c: iomem range 0x100000-0xbf66d7ff could not be reserved
[ 0.303939] system 00:0c: iomem range 0xbf66d800-0xbf6fffff has been reserved
[ 0.303942] system 00:0c: iomem range 0xbf700000-0xbf7fffff has been reserved
[ 0.303944] system 00:0c: iomem range 0xbf700000-0xbfefffff could not be reserved
[ 0.303947] system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved
[ 0.303949] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
[ 0.303952] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.303954] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.303957] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.303959] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved
[ 0.303962] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved
[ 0.303964] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved
[ 0.303967] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 0.303969] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 0.303972] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.338712] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09
[ 0.338717] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.338723] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
[ 0.338728] pci 0000:00:1c.0: PREFETCH window: 0x000000c0000000-0x000000c01fffff
[ 0.338736] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0b
[ 0.338739] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.338746] pci 0000:00:1c.1: MEM window: 0xfe700000-0xfe7fffff
[ 0.338750] pci 0000:00:1c.1: PREFETCH window: 0x000000c0200000-0x000000c03fffff
[ 0.338758] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c
[ 0.338762] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.338768] pci 0000:00:1c.4: MEM window: 0xfe400000-0xfe6fffff
[ 0.338773] pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f01fffff
[ 0.338781] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.338782] pci 0000:00:1e.0: IO window: disabled
[ 0.338789] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff
[ 0.338793] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.338821] alloc irq_desc for 16 on node -1
[ 0.338823] alloc kstat_irqs on node -1
[ 0.338831] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.338837] pci 0000:00:1c.0: setting latency timer to 64
[ 0.338847] alloc irq_desc for 17 on node -1
[ 0.338849] alloc kstat_irqs on node -1
[ 0.338852] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.338857] pci 0000:00:1c.1: setting latency timer to 64
[ 0.338867] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.338872] pci 0000:00:1c.4: setting latency timer to 64
[ 0.338880] pci 0000:00:1e.0: setting latency timer to 64
[ 0.338885] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.338887] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.338890] pci_bus 0000:09: resource 0 io: [0xd000-0xdfff]
[ 0.338892] pci_bus 0000:09: resource 1 mem: [0xfe800000-0xfe8fffff]
[ 0.338894] pci_bus 0000:09: resource 2 pref mem [0xc0000000-0xc01fffff]
[ 0.338896] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff]
[ 0.338899] pci_bus 0000:0b: resource 1 mem: [0xfe700000-0xfe7fffff]
[ 0.338901] pci_bus 0000:0b: resource 2 pref mem [0xc0200000-0xc03fffff]
[ 0.338903] pci_bus 0000:0c: resource 0 io: [0xc000-0xcfff]
[ 0.338905] pci_bus 0000:0c: resource 1 mem: [0xfe400000-0xfe6fffff]
[ 0.338907] pci_bus 0000:0c: resource 2 pref mem [0xf0000000-0xf01fffff]
[ 0.338910] pci_bus 0000:02: resource 1 mem: [0xfe300000-0xfe3fffff]
[ 0.338912] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.338914] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.338951] NET: Registered protocol family 2
[ 0.339042] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.339364] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.339892] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.340146] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.340149] TCP reno registered
[ 0.340216] NET: Registered protocol family 1
[ 0.340232] pci 0000:00:02.0: Boot video device
[ 0.340399] Simple Boot Flag at 0x79 set to 0x1
[ 0.340550] cpufreq-nforce2: No nForce2 chipset.
[ 0.340575] Scanning for low memory corruption every 60 seconds
[ 0.340675] audit: initializing netlink socket (disabled)
[ 0.340684] type=2000 audit(1277275231.339:1): initialized
[ 0.349115] highmem bounce pool size: 64 pages
[ 0.349119] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.350413] VFS: Disk quotas dquot_6.5.2
[ 0.350462] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.350953] fuse init (API version 7.13)
[ 0.351025] msgmni has been set to 1664
[ 0.351207] alg: No test for stdrng (krng)
[ 0.351256] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.351259] io scheduler noop registered
[ 0.351260] io scheduler anticipatory registered
[ 0.351262] io scheduler deadline registered
[ 0.351294] io scheduler cfq registered (default)
[ 0.351453] alloc irq_desc for 24 on node -1
[ 0.351455] alloc kstat_irqs on node -1
[ 0.351467] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.351479] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.351645] alloc irq_desc for 25 on node -1
[ 0.351647] alloc kstat_irqs on node -1
[ 0.351656] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.351667] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.351819] alloc irq_desc for 26 on node -1
[ 0.351821] alloc kstat_irqs on node -1
[ 0.351829] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.351840] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.351940] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.352023] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.352130] ACPI: AC Adapter [AC] (on-line)
[ 0.352196] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.353712] ACPI: Lid Switch [LID]
[ 0.353750] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.353756] ACPI: Power Button [PBTN]
[ 0.353791] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.353794] ACPI: Sleep Button [SBTN]
[ 0.354347] ACPI: SSDT bf66e4b4 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.354771] ACPI: SSDT bf66de4a 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.355071] Monitor-Mwait will be used to enter C-1 state
[ 0.355094] Monitor-Mwait will be used to enter C-2 state
[ 0.355115] Monitor-Mwait will be used to enter C-3 state
[ 0.355120] Marking TSC unstable due to TSC halts in idle
[ 0.355176] processor LNXCPU:00: registered as cooling_device0
[ 0.355461] ACPI: SSDT bf66e77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.355717] ACPI: SSDT bf66e42f 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.355928] Switching to clocksource hpet
[ 0.356618] processor LNXCPU:01: registered as cooling_device1
[ 0.358240] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.358247] ACPI: Thermal Zone [THM] (34 C)
[ 0.364030] isapnp: Scanning for PnP cards...
[ 0.383409] Freeing initrd memory: 7781k freed
[ 0.426222] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.427480] brd: module loaded
[ 0.427878] loop: module loaded
[ 0.427960] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.428077] ata_piix 0000:00:1f.1: version 2.13
[ 0.428091] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.428136] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.433200] ACPI: Battery Slot [BAT0] (battery present)
[ 0.433213] scsi0 : ata_piix
[ 0.433277] scsi1 : ata_piix
[ 0.433764] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[ 0.433767] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[ 0.434049] Fixed MDIO Bus: probed
[ 0.434077] PPP generic driver version 2.4.2
[ 0.434108] tun: Universal TUN/TAP device driver, 1.6
[ 0.434109] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.434180] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.434198] alloc irq_desc for 22 on node -1
[ 0.434200] alloc kstat_irqs on node -1
[ 0.434205] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.434219] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.434223] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.434260] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.434291] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.438164] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.438315] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 0.442221] ata2: port disabled. ignoring.
[ 0.452014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.452097] usb usb1: configuration #1 chosen from 1 choice
[ 0.452121] hub 1-0:1.0: USB hub found
[ 0.452127] hub 1-0:1.0: 4 ports detected
[ 0.452179] alloc irq_desc for 20 on node -1
[ 0.452181] alloc kstat_irqs on node -1
[ 0.452185] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.452194] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.452197] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.452223] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.452250] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.456143] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.456155] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 0.472015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.472072] usb usb2: configuration #1 chosen from 1 choice
[ 0.472093] hub 2-0:1.0: USB hub found
[ 0.472100] hub 2-0:1.0: 6 ports detected
[ 0.472154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.472166] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.472184] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.472191] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.472194] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.472219] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.472246] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 0.472326] usb usb3: configuration #1 chosen from 1 choice
[ 0.472347] hub 3-0:1.0: USB hub found
[ 0.472353] hub 3-0:1.0: 2 ports detected
[ 0.472393] alloc irq_desc for 21 on node -1
[ 0.472395] alloc kstat_irqs on node -1
[ 0.472399] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.472405] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.472408] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.472435] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.472468] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 0.472546] usb usb4: configuration #1 chosen from 1 choice
[ 0.472567] hub 4-0:1.0: USB hub found
[ 0.472573] hub 4-0:1.0: 2 ports detected
[ 0.472615] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.472621] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.472624] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.472648] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.472674] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 0.472753] usb usb5: configuration #1 chosen from 1 choice
[ 0.472774] hub 5-0:1.0: USB hub found
[ 0.472780] hub 5-0:1.0: 2 ports detected
[ 0.472818] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.472824] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.472827] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.472857] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.472884] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 0.472961] usb usb6: configuration #1 chosen from 1 choice
[ 0.472981] hub 6-0:1.0: USB hub found
[ 0.472987] hub 6-0:1.0: 2 ports detected
[ 0.473027] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.473033] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.473036] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.473064] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.473090] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 0.473166] usb usb7: configuration #1 chosen from 1 choice
[ 0.473187] hub 7-0:1.0: USB hub found
[ 0.473193] hub 7-0:1.0: 2 ports detected
[ 0.473285] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.488721] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.501688] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.501693] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.501716] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.501734] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.501751] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.501839] mice: PS/2 mouse device common for all mice
[ 0.502676] rtc_cmos 00:04: RTC can wake from S4
[ 0.502704] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.502736] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.502819] device-mapper: uevent: version 1.0.3
[ 0.502896] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 0.502953] device-mapper: multipath: version 1.1.0 loaded
[ 0.502955] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.503045] EISA: Probing bus 0 at eisa.0
[ 0.503052] Cannot allocate resource for EISA slot 1
[ 0.503053] Cannot allocate resource for EISA slot 2
[ 0.503078] EISA: Detected 0 cards.
[ 0.503199] cpuidle: using governor ladder
[ 0.503294] cpuidle: using governor menu
[ 0.503663] TCP cubic registered
[ 0.503792] NET: Registered protocol family 10
[ 0.504199] lo: Disabled Privacy Extensions
[ 0.504481] NET: Registered protocol family 17
[ 0.504943] Using IPI No-Shortcut mode
[ 0.505007] PM: Resume from disk failed.
[ 0.505017] registered taskstats version 1
[ 0.505615] Magic number: 14:494:671
[ 0.505689] rtc_cmos 00:04: setting system clock to 2010-06-23 06:40:32 UTC (1277275232)
[ 0.505692] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.505693] EDD information not available.
[ 0.530518] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.670811] ata1.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1B, max UDMA/33
[ 0.708314] ata1.00: configured for UDMA/33
[ 0.728708] isapnp: No Plug & Play device found
[ 0.731016] scsi 0:0:0:0: CD-ROM PBDS DVD+-RW DS-8W1P BD1B PQ: 0 ANSI: 5
[ 0.742209] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.742214] Uniform CD-ROM driver Revision: 3.20
[ 0.742335] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.742381] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.742438] Freeing unused kernel memory: 656k freed
[ 0.742840] Write protecting the kernel text: 4676k
[ 0.742890] Write protecting the kernel read-only data: 1840k
[ 0.767176] udev: starting version 151
[ 0.780044] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.840084] sky2 driver version 1.25
[ 0.840134] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.840151] sky2 0000:09:00.0: setting latency timer to 64
[ 0.840184] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[ 0.840297] alloc irq_desc for 27 on node -1
[ 0.840299] alloc kstat_irqs on node -1
[ 0.840317] sky2 0000:09:00.0: irq 27 for MSI/MSI-X
[ 0.840939] sky2 eth0: addr 00:21:9b:cc:be:ce
[ 0.851644] ahci 0000:00:1f.2: version 3.0
[ 0.851664] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.851710] alloc irq_desc for 28 on node -1
[ 0.851712] alloc kstat_irqs on node -1
[ 0.851723] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 0.851794] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 0.851797] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[ 0.851803] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.878635] scsi2 : ahci
[ 0.891466] scsi3 : ahci
[ 0.893994] scsi4 : ahci
[ 0.894219] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 28
[ 0.894222] ata4: DUMMY
[ 0.894225] ata5: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 28
[ 0.917224] usb 1-1: configuration #1 chosen from 1 choice
[ 1.212158] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.212190] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.267682] ata3.00: ATA-8: WDC WD2500BEVS-75UST0, 01.01A01, max UDMA/133
[ 1.267685] ata3.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[ 1.268745] ata3.00: configured for UDMA/133
[ 1.284287] scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVS-7 01.0 PQ: 0 ANSI: 5
[ 1.284419] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.284479] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.284518] sd 2:0:0:0: [sda] Write Protect is off
[ 1.284520] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.284540] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.284651] sda: sda1 sda2 < sda5 sda6 sda7 sda8
[ 1.384055] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 1.406489] sda9 sda10 >
[ 1.415986] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.418414] ohci1394 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.474095] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fe3ff800-fe3fffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 1.558299] usb 7-2: configuration #1 chosen from 1 choice
[ 1.561191] hub 7-2:1.0: USB hub found
[ 1.563176] hub 7-2:1.0: 3 ports detected
[ 1.845180] usb 7-2.1: new full speed USB device using uhci_hcd and address 3
[ 1.973240] usb 7-2.1: configuration #1 chosen from 1 choice
[ 2.049157] usb 7-2.2: new full speed USB device using uhci_hcd and address 4
[ 2.179289] usb 7-2.2: configuration #1 chosen from 1 choice
[ 2.191106] usbcore: registered new interface driver hiddev
[ 2.194331] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input5
[ 2.194394] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0
[ 2.194412] usbcore: registered new interface driver usbhid
[ 2.194414] usbhid: v2.6:USB HID core driver
[ 2.222685] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 2.257162] usb 7-2.3: new full speed USB device using uhci_hcd and address 5
[ 2.387285] usb 7-2.3: configuration #1 chosen from 1 choice
[ 2.394481] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input6
[ 2.394542] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0
[ 2.748586] ieee1394: Host added: ID:BUS[0-00:1023] GUID[4a4fc00008696c70]
[ 3.976228] Adding 1527800k swap on /dev/sda10. Priority:-1 extents:1 across:1527800k
[ 4.259069] udev: starting version 151
[ 4.992081] lp: driver loaded but no devices found
[ 5.377018] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.491909] Linux agpgart interface v0.103
[ 5.497991] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 5.497993] ricoh-mmc: Copyright(c) Philip Langdale
[ 5.498017] ricoh-mmc: Ricoh MMC controller found at 0000:02:09.2 [1180:0843] (rev 12)
[ 5.498033] ricoh-mmc: Controller is now disabled.
[ 5.568086] Linux video capture interface: v2.00
[ 5.587284] sdhci: Secure Digital Host Controller Interface driver
[ 5.587286] sdhci: Copyright(c) Pierre Ossman
[ 5.612473] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 5.613381] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 5.618205] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 5.627949] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[ 5.628500] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 5.629197] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input7
[ 5.629279] usbcore: registered new interface driver uvcvideo
[ 5.629310] USB Video Class driver (v0.1.0)
[ 5.691971] Bluetooth: Core ver 2.15
[ 5.692021] NET: Registered protocol family 31
[ 5.692023] Bluetooth: HCI device and connection manager initialized
[ 5.692026] Bluetooth: HCI socket layer initialized
[ 5.693884] lib80211: common routines for IEEE802.11 drivers
[ 5.693887] lib80211_crypt: registered algorithm 'NULL'
[ 5.702303] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 5.724535] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 5.724557] alloc irq_desc for 18 on node -1
[ 5.724559] alloc kstat_irqs on node -1
[ 5.724564] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 5.726611] Registered led device: mmc0::
[ 5.727636] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA
[ 5.742148] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.742347] usbcore: registered new interface driver btusb
[ 6.011549] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input9
[ 6.035892] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input10
[ 6.192886] wl: module license 'MIXED/Proprietary' taints kernel.
[ 6.192890] Disabling lock debugging due to kernel taint
[ 6.201195] wl 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.201208] wl 0000:0b:00.0: setting latency timer to 64
[ 6.363062] [drm] Initialized drm 1.1.0 20060810
[ 6.363883] lib80211_crypt: registered algorithm 'TKIP'
[ 6.364084] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36
[ 6.665760] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.665765] i915 0000:00:02.0: setting latency timer to 64
[ 6.669514] alloc irq_desc for 29 on node -1
[ 6.669517] alloc kstat_irqs on node -1
[ 6.669525] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 6.669532] [drm] set up 7M of stolen space
[ 6.771009] type=1505 audit(1277275238.763:2): operation="profile_load" pid=729 name="/sbin/dhclient3"
[ 6.771577] type=1505 audit(1277275238.763:3): operation="profile_load" pid=729 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 6.771881] type=1505 audit(1277275238.763:4): operation="profile_load" pid=729 name="/usr/lib/connman/scripts/dhclient-script"
[ 6.796435] composite sync not supported
[ 7.148819] [drm] initialized overlay support
[ 7.656879] composite sync not supported
[ 7.852876] fb0: inteldrmfb frame buffer device
[ 7.852879] registered panic notifier
[ 7.863928] acpi device:2f: registered as cooling_device2
[ 7.864691] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input11
[ 7.864780] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 7.864828] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
[ 7.864928] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input12
[ 7.864985] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 7.865142] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.865184] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 7.865209] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.928601] vga16fb: initializing
[ 7.928605] vga16fb: mapped to 0xc00a0000
[ 7.928608] vga16fb: not registering due to another framebuffer present
[ 8.191498] Console: switching to colour frame buffer device 160x50
[ 8.291453] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
[ 8.365098] HDMI already defined
[ 8.508275] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.508357] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 8.508410] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 10.344816] composite sync not supported
[ 10.645754] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 10.745913] EXT4-fs (sda9): mounted filesystem with ordered data mode
[ 12.998033] type=1505 audit(1277275244.990:5): operation="profile_load" pid=998 name="/usr/share/gdm/guest-session/Xsession"
[ 12.999592] type=1505 audit(1277275244.990:6): operation="profile_replace" pid=999 name="/sbin/dhclient3"
[ 13.000148] type=1505 audit(1277275244.994:7): operation="profile_replace" pid=999 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 13.000457] type=1505 audit(1277275244.994:8): operation="profile_replace" pid=999 name="/usr/lib/connman/scripts/dhclient-script"
[ 13.408488] type=1505 audit(1277275245.402:9): operation="profile_load" pid=1000 name="/usr/bin/evince"
[ 13.417849] type=1505 audit(1277275245.410:10): operation="profile_load" pid=1000 name="/usr/bin/evince-previewer"
[ 13.422061] type=1505 audit(1277275245.414:11): operation="profile_load" pid=1000 name="/usr/bin/evince-thumbnailer"
[ 13.640324] type=1505 audit(1277275245.634:12): operation="profile_load" pid=1005 name="/usr/lib/cups/backend/cups-pdf"
[ 13.640950] type=1505 audit(1277275245.634:13): operation="profile_load" pid=1005 name="/usr/sbin/cupsd"
[ 13.649200] type=1505 audit(1277275245.642:14): operation="profile_load" pid=1006 name="/usr/sbin/tcpdump"
[ 13.703260] sky2 eth0: enabling interface
[ 13.703430] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.031316] composite sync not supported
[ 16.102893] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 16.102896] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 16.102897] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 16.102898] vboxdrv: the usage of hardware performance counters by
[ 16.102899] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 16.102903] vboxdrv: Found 2 processor cores.
[ 16.103328] vboxdrv: fAsync=0 offMin=0x18c offMax=0x1ed8
[ 16.103620] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 16.103622] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001).
[ 16.132721] vboxguest: exports duplicate symbol RTMemExecFree (owned by vboxdrv)
[ 16.536860] composite sync not supported
[ 17.359854] ppdev: user-space parallel port driver
[ 17.406529] Bluetooth: L2CAP ver 2.14
[ 17.406532] Bluetooth: L2CAP socket layer initialized
[ 17.782110] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.782113] Bluetooth: BNEP filters: protocol multicast
[ 17.855239] Bridge firewalling registered
[ 18.353469] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.353471] Bluetooth: SCO socket layer initialized
[ 18.531981] Bluetooth: RFCOMM TTY layer initialized
[ 18.531985] Bluetooth: RFCOMM socket layer initialized
[ 18.531987] Bluetooth: RFCOMM ver 1.11
[ 22.958389] composite sync not supported
[ 23.420894] composite sync not supported
[ 23.876839] composite sync not supported
[ 24.396041] eth1: no IPv6 routers present
[ 28.393525] composite sync not supported
[ 31.752869] composite sync not supported
[ 494.014246] CE: hpet increasing min_delta_ns to 15000 nsec
Module Size Used by
binfmt_misc 6587 1
rfcomm 33421 4
sco 7885 2
bridge 45582 0
stp 1655 1 bridge
bnep 9436 2
l2cap 30624 16 rfcomm,bnep
ppdev 5259 0
vboxdrv 168753 0
snd_hda_codec_idt 51914 1
snd_hda_codec_intelhdmi 11622 1
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_hda_intel 21877 2
snd_hda_codec 74201 3 snd_hda_codec_idt,snd_hda_codec_intelhdmi,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70662 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
i915 282354 3
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
drm_kms_helper 29297 1 i915
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
lib80211_crypt_tkip 7596 0
drm 162471 4 i915,drm_kms_helper
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
joydev 8708 0
i2c_algo_bit 5028 1 i915
snd 54148 17 snd_hda_codec_idt,snd_hda_codec_intelhdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
wl 1959598 0
video 17375 1 i915
soundcore 6620 1 snd
btusb 10925 2
sdhci_pci 5470 0
output 1871 1 video
dell_wmi 1793 0
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
lib80211 5046 2 lib80211_crypt_tkip,wl
bluetooth 49892 9 rfcomm,sco,bnep,l2cap,btusb
uvcvideo 56990 0
intel_agp 24177 2 i915
psmouse 63245 0
sdhci 15462 1 sdhci_pci
dell_laptop 6856 0
videodev 34361 1 uvcvideo
ricoh_mmc 2923 0
v4l1_compat 13251 2 uvcvideo,videodev
agpgart 31724 2 drm,intel_agp
led_class 2864 1 sdhci
dcdbas 5422 1 dell_laptop
serio_raw 3978 0
lp 7028 0
parport 32635 2 ppdev,lp
usbhid 36110 0
hid 67032 1 usbhid
ohci1394 26950 0
ieee1394 81181 1 ohci1394
sky2 40775 0
ahci 32008 4
