Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.32-21-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.21
Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010
scanModem update of: 2010_05_29
Distrib_ID=Ubuntu
DistribCodeName=lucid
AptRepositoryStem=http://ir.archive.ubuntu.com/ubuntu/
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 09da:000a A4 Tech Co., Ltd Port Mouse
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
08:01.0 Communication controller: Conexant Systems, Inc. SoftV92 SpeakerPhone SoftRing Modem with SmartSP (rev 01)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
01:00.1 Audio device: ATI Technologies Inc HD48x0 audio
High Definition Audio cards can host modem chips.
For candidate card in slot 08:01.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
08:01.0 14f1:2f30 14f1:205d Communication controller: Conexant Systems, Inc. SoftV92 SpeakerPhone SoftRing Modem with SmartSP
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 08:01.0 ----
[ 0.191464] pci 0000:08:01.0: reg 10 32bit mmio: [0xfebf0000-0xfebfffff]
[ 0.191470] pci 0000:08:01.0: reg 14 io port: [0xec00-0xec07]
[ 0.191509] pci 0000:08:01.0: PME# supported from D3hot D3cold
[ 0.191513] pci 0000:08:01.0: PME# disabled
The PCI slot 08:01.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:293e 1462:356a Audio device: Intel Corporation 82801I
Modem interrupt assignment and sharing:
22: 694 327 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.189605] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe7f8000-0xfe7fbfff]
[ 0.189644] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.189647] pci 0000:00:1b.0: PME# disabled
[ 8.130563] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.130594] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.212012] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 01:00.1, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:00.1 1002:aa30 1462:aa30 Audio device: ATI Technologies Inc HD48x0 audio
Modem interrupt assignment and sharing:
17: 52 44 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 01:00.1 ----
[ 0.190802] pci 0000:01:00.1: reg 10 64bit mmio: [0xfe8ec000-0xfe8effff]
[ 0.190836] pci 0000:01:00.1: supports D1 D2
[ 8.263701] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.263736] HDA Intel 0000:01:00.1: setting latency timer to 64
New HCF.HSF device 8086:293e
New HCF.HSF device 1002:aa30
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801I "
package="both hcfpcimodem and hsfmodem"
CLASS=0403
PCIDEV=8086:293e
SUBSYS=1462:356a
IRQ=22
IDENT=HCF.HSF
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801I
Primary device ID: 8086:293e
Support type needed or chipset: HCF.HSF
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
8086:293e could be either a HSF or HCF Conexant modem, because of ambiguous
use of the PCI ID by modem assemblers. First try the hcfpcimodem package.
If the installation aborts, then use the hsfmodem package. Read DOCs/Conexant.txt
for details and Modem/DOCs/YourSystem.txt for follow through guidance.
For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@xxxxxxxxxxxx>
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.06full_k2.6.32_21_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
The directions following below need only be pursued, if the above procedures are not adequate.
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.32_21_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, the needed drivers
will be auto compiled anyway. Alternatively, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Predictive diagnostics for card in bus 01:00.1:
Modem chipset detected on
NAME="Audio device: ATI Technologies Inc HD48x0 audio"
package="both hcfpcimodem and hsfmodem"
CLASS=0403
PCIDEV=1002:aa30
SUBSYS=1462:aa30
IRQ=17
IDENT=HCF.HSF
For candidate modem in: 01:00.1
0403 Audio device: ATI Technologies Inc HD48x0 audio
Primary device ID: 1002:aa30
Support type needed or chipset: HCF.HSF
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
1002:aa30 could be either a HSF or HCF Conexant modem, because of ambiguous
use of the PCI ID by modem assemblers. First try the hcfpcimodem package.
If the installation aborts, then use the hsfmodem package. Read DOCs/Conexant.txt
for details and Modem/DOCs/YourSystem.txt for follow through guidance.
For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@xxxxxxxxxxxx>
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.06full_k2.6.32_21_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
The directions following below need only be pursued, if the above procedures are not adequate.
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.32_21_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, the needed drivers
will be auto compiled anyway. Alternatively, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Predictive diagnostics for card in bus 08:01.0:
Modem chipset detected on
NAME="Communication controller: Conexant Systems, Inc. SoftV92 SpeakerPhone SoftRing Modem with SmartSP "
CLASS=0780
PCIDEV=14f1:2f30
SUBSYS=14f1:205d
IRQ=5
HDA2=00:1b.0
HDA2=01:00.1
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 08:01.0
0780 Communication controller: Conexant Systems, Inc. SoftV92 SpeakerPhone SoftRing Modem with SmartSP
Primary device ID: 14f1:2f30
Support type needed or chipset: hsfmodem
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@xxxxxxxxxxxx>
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.06full_k2.6.32_21_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
The directions following below need only be pursued, if the above procedures are not adequate.
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.32_21_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, the needed drivers
will be auto compiled anyway. Alternatively, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.3
and the compiler used in kernel assembly: 4.4.3
The patch utility is needed for compiling ALSA drivers, and possibly others.
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.32-21-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
