Hi Jacques,
I tried to connect through the wvdial but got an error.
First I configured my wvdial
[root@www etc]# wvdialconf /etc/wvdial.conf
Scanning your serial ports for a modem.
Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to it.
ttySHSF0<*1>: ATQ0 V1 E1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 Z -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySHSF0<*1>: Modem Identifier: ATI -- 56000
ttySHSF0<*1>: Speed 4800: AT -- OK
ttySHSF0<*1>: Speed 9600: AT -- OK
ttySHSF0<*1>: Speed 19200: AT -- OK
ttySHSF0<*1>: Speed 38400: AT -- OK
ttySHSF0<*1>: Speed 57600: AT -- OK
ttySHSF0<*1>: Speed 115200: AT -- OK
ttySHSF0<*1>: Speed 230400: AT -- OK
ttySHSF0<*1>: Speed 460800: AT -- OK
ttySHSF0<*1>: Max speed is 460800; that should be safe.
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S1 S2 S3 SHSF1 SHSF2 SHSF3 SHSF4 SHSF5
Port Scan<*1>: SHSF6 SHSF7
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Found a modem on /dev/ttySHSF0, using link /dev/modem in config.
Modem configuration written to /etc/wvdial.conf.
ttySHSF0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
[root@www etc]#
Now edited the wvdial.conf
[root@www etc]# cat /etc/wvdial.conf
[Dialer Defaults]
Modem = /dev/modem
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Phone = xxxxxxxxxx
Username = xxxxx
Password = xxxxx
[root@www etc]#
Now wehn I am dialing , I am getting the below error..
[root@www etc]# wvdial
--> WvDial: Internet dialer version 1.54.0
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT04428495504
--> Waiting for carrier.
ATDT04428495504
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT04428495504
--> Waiting for carrier.
ATDT04428495504
Caught signal #2! Attempting to exit gracefully...
--> Disconnecting at Thu Apr 15 00:29:58 2010
[root@www etc]#
My Phone line is working fine and when I m trying the same connection with my windows
machine..its working finr..
Request your kind help in this regard.Is it a modem problem??
--
Thanks and Regards,
Diptanu Paul
EMAIL:- diptanu@xxxxxxxxxxxxxxxxxxxxx
"If GNU/Linux does not have any solution...
Then you have got a wrong problem....."
=======POWER OF OPEN SOURCE========
"If you win, you need not have to explain....
If you loose, you should not be there to explain!"
--Adolf Hitler
Hi Jacques,
As per your instruction done the following
1. downloaded the hsfmodem-7.80.02.05full_k2.6.18_8.el5-1rh.i686.rpm and installed by
rpm -ivh...
2. I downloaded the "alsa-driver-linuxant-1.0.20.3_k2.6.18_8.el5-1rh.i686.rpm.zip" and
installed it by rpm -ivh ......
3. init 6
run the hsfconfig with the default options and below are the logs:-
[root@www ~]# hsfconfig
Conexant HSF softmodem driver, version 7.80.02.05full
If you need license keys, assistance or more information, please go to:
http://www.linuxant.com/
When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".
Warning: existing driver modules found under:
/lib/modules/2.6.18-8.el5/
Would you like to keep using them? [no]
Pre-built driver modules that seem compatible with your system were found under
/usr/lib/hsfmodem/modules/binaries/linux-2.6.18-8.el5-SMP.
Would you like to use them? [yes]
Automatically guessed region (using timezone): "INDIA"
Please enter region name for modem unit 0 [INDIA]:
Setting region for modem unit 0: "INDIA"
To change, use "hsfconfig --region" or "AT+GCI=<T35code>"
The current region can be displayed by entering "ATI9" in a terminal program.
Note: we respect user privacy. Email addresses are not communicated
nor used for any purpose other than to manage licenses!
Please enter your email address [unknown]: diptanu@xxxxxxxxxxxxxxxxxxxxx
License keys can be obtained from http://www.linuxant.com/
Without one, the modem operates in FREE mode (max 14.4Kbps data only, no fax)
The registration ID for modem unit 0 is: 621F-6F8D-A0A7
Please enter license key [FREE]:
Setting license for modem unit 0: "diptanu@xxxxxxxxxxxxxxxxxxxxx/FREE"
Note: kernel module snd-via82xx-modem overridden by hsfmc97via
Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
Note: kernel module snd-atiixp-modem overridden by hsfmc97ati
Current parameters: ("hsfconfig --info")
Config for modem unit 0: /dev/ttySHSF0
Device instance: 0-PCI-14f1:2f30-14f1:205d
HW revision : Basic2 2.18 Standard DAA 3VoltsIA
HW profile name: hsfpcibasic2hsfi
Registration ID: 621F-6F8D-A0A7
License owner : diptanu@xxxxxxxxxxxxxxxxxxxxx
License key : FREE
License status : FREE (max 14.4kbps data only)
Current region : INDIA (T.35 code: 0053)
To enable full 56K modem and FAX functionality, enter your license information
with "hsfconfig --license".
License owner and key data must EXACTLY match the information respectively
provided to and by Linuxant. Otherwise, license status will remain "FREE"!
[root@www ~]#
Got the following logs at /var/log/messages:-
Apr 14 15:22:20 www kernel: PCI: Enabling device 0000:01:02.0 (0000 -> 0003)
Apr 14 15:22:20 www kernel: ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 19 (level, low)
-> IRQ 185
Apr 14 15:22:20 www kernel: ttySHSF0 at I/O 0xec00 (irq = 185) is a Conexant HSF
softmodem (PCI-14f1:2f30-14f1:205d)
Apr 14 15:22:21 www kernel: usbcore: registered new driver hsfusbcd2
lsmod shows the following:-
hsfusbcd2 69440 0
hsfmc97sis 71616 0
hsfmc97ati 70312 0
hsfmc97ali 77240 0
hsfmc97via 73144 0
hsfmc97ich 74940 0
hsfpcibasic3 112904 0
hsfpcibasic2 71216 0
hsfserial 27908 8
hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2
hsfengine 1296096 9
hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2,hsfserial
hsfosspec 120712 13
hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2,hsfserial,hsfengine
hsfsoar 97496 7
hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2
[root@www tmp]#
Also wvdial found the follwong :-
[root@www tmp]# cat /etc/wvdial.conf
[Dialer Defaults]
Modem = /dev/modem
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
; Phone = <Target Phone Number>
; Username = <Your Login Name>
; Password = <Your Password>
[root@www tmp]#
Now I think the same is installed properly.
However the LSPCI shows the same.
01:02.0 Communication controller: Conexant Unknown device 2f30 (rev 01)
Anyways..I will try to check by connecting the telephoneline and check if it works now.
Thanks for all your valuable support till now.
Thanking you all again..
--
Thanks and Regards,
Diptanu Paul
EMAIL:- diptanu@xxxxxxxxxxxxxxxxxxxxx
"If GNU/Linux does not have any solution...
Then you have got a wrong problem....."
=======POWER OF OPEN SOURCE========
"If you win, you need not have to explain....
If you loose, you should not be there to explain!"
--Adolf Hitler
Can you please repeat what you did here but answering yes instead of
default no at the following place:
Would you like to use the replacement HDA modules? [no]
Or, even better, may I suggest that you open
http://www.linuxant.com/drivers/hsf/index.php, then find the HSF menu on the left side
of the page, click on Readme, find the HDA area in the new page displayed, and follow
the instructions?
When downloading the "alsa" driver you can take the precompiled file for your kernel
(the last in the list).
Jacques
Paul Diptanu wrote:
> Hi Jacques,
>
> Depending on my kernal and version
> [root@www ~]# uname -a
> Linux www 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:21 EST 2007 i686 i686 i386 GNU/Linux
>
> [root@www ~]# cat /etc/redhat-release
> Red Hat Enterprise Linux Server release 5 (Tikanga)
> [root@www ~]#
>
>
> I downloaded the folloing driver
> wget
> http://www.linuxant.com/drivers/hsf/full/archive/hsfmodem-7.80.02.05full/hsfmodem-7.80.02.05full_k2.6.18_8.el5-1rh.i686.rpm.zip
>
> and installed the same.but got the follwing error.
>
>
> warning: hsfmodem-7.80.02.05full_k2.6.18_8.el5-1rh.i686.rpm: Header V3 DSA signature:
> NOKEY, key ID 5dfbf7dc
> Preparing...
> ########################################### [100%]
> Removing old /etc/hsfmodem
> 1:hsfmodem
>
> ###########################################
> [100%]
> Conexant HSF softmodem driver, version 7.80.02.05full
>
> If you need license keys, assistance or more information, please go to:
> http://www.linuxant.com/
>
> When reporting a problem for the first time, please send
> us the file generated by "hsfconfig --dumpdiag".
>
>
> Pre-built driver modules that seem compatible with your system were found under
> /usr/lib/hsfmodem/modules/binaries/linux-2.6.18-8.el5-SMP.
>
> Warning: no device detected by hsf driver - HDA modems may require reboot
>
> Note: HDA support not compiled in the driver
>
> Note: kernel module snd-via82xx-modem overridden by hsfmc97via
> Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
> Note: kernel module snd-atiixp-modem overridden by hsfmc97ati
>
>
>
>
> [root@www ~]# hsfconfig
> Conexant HSF softmodem driver, version 7.80.02.05full
>
> If you need license keys, assistance or more information, please go to:
> http://www.linuxant.com/
>
> When reporting a problem for the first time, please send
> us the file generated by "hsfconfig --dumpdiag".
>
> Warning: existing driver modules found under:
> /lib/modules/2.6.18-8.el5/
> Would you like to keep using them? [no]
>
> Would you like to use the replacement HDA modules? [no]
>
> Pre-built driver modules that seem compatible with your system were found under
> /usr/lib/hsfmodem/modules/binaries/linux-2.6.18-8.el5-SMP.
> Would you like to use them? [yes]
>
> Warning: no device detected by hsf driver - HDA modems may require reboot
>
> Note: HDA support not compiled in the driver
>
> Note: kernel module snd-via82xx-modem overridden by hsfmc97via
> Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
> Note: kernel module snd-atiixp-modem overridden by hsfmc97ati
>
>
>
>
>
----------------------------------------------------------------------------------
This e-mail and any files transmitted with it are for the sole use of the intended
recipient(s) and may contain confidential and privileged information. If you are not the
intended recipient, please contact the sender by reply e-mail and destroy all copies and
the original message. The recipient acknowledges that owner of the
www.diptanuinfo.co.cc(or the webmaster/administrator) of the website/mail server,are
unable to exercise control or ensure or guarantee the integrity of/overthe contents of
the information contained in e-mail transmissions and further acknowledges that any
views expressed in this message are those of the individual sender only under all
circumstances.Before opening any attachments please check them for viruses and defects.
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
This e-mail and any files transmitted with it are for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. The recipient acknowledges that owner of the www.diptanuinfo.co.cc(or the webmaster/administrator) of the website/mail server,are unable to exercise control or ensure or guarantee the integrity of/overthe contents of the information contained in e-mail transmissions and further acknowledges that any views expressed in this message are those of the individual sender only under all circumstances.Before opening any attachments please check them for viruses and defects.
----------------------------------------------------------------------------------
