Rami, Syria kernel 2.6.28-11-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank for the reply but the modem doesn't load on boot and the boot instruction is overwhelming, i attached a file which might be a helpful


Thanks


      
           CPU0       
  0:      21172   IO-APIC-edge      timer
  1:        335   IO-APIC-edge      i8042
  7:          1   IO-APIC-edge    
  8:          1   IO-APIC-edge      rtc0
  9:        497   IO-APIC-fasteoi   acpi
 12:     127410   IO-APIC-edge      i8042
 14:       3588   IO-APIC-edge      pata_amd
 15:          0   IO-APIC-edge      pata_amd
 16:       1901   IO-APIC-fasteoi   nvidia
 18:          0   IO-APIC-fasteoi   ohci_hcd:usb3, ohci_hcd:usb4
 19:        171   IO-APIC-fasteoi   ath
 21:       2661   IO-APIC-fasteoi   HDA Intel
 22:         29   IO-APIC-fasteoi   ehci_hcd:usb1, ehci_hcd:usb2
2300:      46164   PCI-MSI-edge      eth0
2301:      10043   PCI-MSI-edge      ahci
NMI:          0   Non-maskable interrupts
LOC:      33742   Local timer interrupts
RES:          0   Rescheduling interrupts
CAL:          0   Function call interrupts
TLB:          0   TLB shootdowns
SPU:          0   Spurious interrupts
ERR:          1
MIS:          0

[    0.000000] BIOS EBDA/lowmem at: 0009e000/0009e000
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #37-Ubuntu SMP Mon Mar 23 16:40:23 UTC 2009 (Ubuntu 2.6.28-11.37-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003bf50000 (usable)
[    0.000000]  BIOS-e820: 000000003bf50000 - 000000003bf65000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003bf65000 - 000000003bf66000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003bf66000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x3bf50 max_arch_pfn = 0x100000
[    0.000000] Scanning 2 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 0000000000007000 (usable)
[    0.000000]  modified: 0000000000007000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 0000000000091000 (usable)
[    0.000000]  modified: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000d2000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003bf50000 (usable)
[    0.000000]  modified: 000000003bf50000 - 000000003bf65000 (ACPI data)
[    0.000000]  modified: 000000003bf65000 - 000000003bf66000 (ACPI NVS)
[    0.000000]  modified: 000000003bf66000 - 0000000040000000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[    0.000000] RAMDISK: 378be000 - 37fef862
[    0.000000] Allocated new RAMDISK: 00881000 - 00fb2862
[    0.000000] Move RAMDISK from 00000000378be000 - 0000000037fef861 to 00881000 - 00fb2861
[    0.000000] ACPI: RSDP 000F83C0, 0024 (r2 PTLTD )
[    0.000000] ACPI: XSDT 3BF5CE7A, 006C (r1 HPQOEM SLIC-MPC  6040000  LTP        0)
[    0.000000] ACPI: FACP 3BF64AC9, 00F4 (r3 NVIDIA MCP67-M   6040000 PTL_    F4240)
[    0.000000] ACPI: DSDT 3BF5CEE6, 7B6F (r1 NVIDIA    MCP67  6040000 MSFT  3000000)
[    0.000000] ACPI: FACS 3BF65FC0, 0040
[    0.000000] ACPI: TCPA 3BF64BBD, 0032 (r1 Phoeni  x        6040000  TL         0)
[    0.000000] ACPI: SRAT 3BF64BEF, 0090 (r1 AMD    HAMMER    6040000 AMD         1)
[    0.000000] ACPI: SSDT 3BF64C7F, 0115 (r1 PTLTD  POWERNOW  6040000  LTP        1)
[    0.000000] ACPI: MCFG 3BF64D94, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
[    0.000000] ACPI: HPET 3BF64DD0, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
[    0.000000] ACPI: APIC 3BF64E08, 005A (r1 PTLTD  	 APIC    6040000  LTP        0)
[    0.000000] ACPI: BOOT 3BF64E62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
[    0.000000] ACPI: SLIC 3BF64E8A, 0176 (r1 HPQOEM SLIC-MPC  6040000  LTP        1)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 75MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 00000000 - 373fe000
[    0.000000]   bootmap 00012000 - 00018e80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 000087c52c]    TEXT DATA BSS ==> [0000100000 - 000087c52c]
[    0.000000]   #4 [000087d000 - 0000881000]    INIT_PG_TABLE ==> [000087d000 - 0000881000]
[    0.000000]   #5 [000009e000 - 0000100000]    BIOS reserved ==> [000009e000 - 0000100000]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [0000881000 - 0000fb2862]      NEW RAMDISK ==> [0000881000 - 0000fb2862]
[    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
[    0.000000] found SMP MP-table at [c00f8390] 000f8390
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x0003bf50
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x00000007
[    0.000000]     0: 0x00000010 -> 0x00000091
[    0.000000]     0: 0x00000100 -> 0x0003bf50
[    0.000000] On node 0 totalpages: 245460
[    0.000000] free_area_init_node: node 0, pgdat c06d0f00, node_mem_map c1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3940 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 151 pages used for memmap
[    0.000000]   HighMem zone: 19131 pages, LIFO batch:3
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 0000000000091000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243541
[    0.000000] Kernel command line: root=UUID=8e85da96-56b7-4890-bb9d-37df33be9199 ro quiet splash 
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2000.059 MHz processor.
[    0.004000] spurious 8259A interrupt: IRQ7.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] allocated 4911680 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 953124k/982336k available (4126k kernel code, 28424k reserved, 2208k data, 532k init, 77128k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.004000]       .init : 0xc0737000 - 0xc07bc000   ( 532 kB)
[    0.004000]       .data : 0xc0507a7f - 0xc072fe60   (2208 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0507a7f   (4126 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.11 BogoMIPS (lpj=8000236)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] AppArmor: AppArmor initialized
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys memory
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 256K (64 bytes/line)
[    0.004000] using C1E aware idle routine
[    0.004000] Checking 'hlt' instruction... OK.
[    0.016471] SMP alternatives: switching to UP code
[    0.135904] Freeing SMP alternatives: 18k freed
[    0.135908] ACPI: Core revision 20080926
[    0.138281] ACPI: Checking initramfs for custom DSDT
[    0.420566] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.460308] CPU0: Mobile AMD Sempron(tm) Processor 3600+ stepping 02
[    0.464001] Brought up 1 CPUs
[    0.464001] Total of 1 processors activated (4000.11 BogoMIPS).
[    0.464001] CPU0 attaching NULL sched-domain.
[    0.464001] net_namespace: 776 bytes
[    0.464001] Booting paravirtualized kernel on bare hardware
[    0.464001] Time:  6:39:50  Date: 03/31/10
[    0.464001] regulator: core version 0.5
[    0.464001] NET: Registered protocol family 16
[    0.464001] EISA bus registered
[    0.464001] ACPI: bus type pci registered
[    0.464001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
[    0.464001] PCI: MCFG area at e0000000 reserved in E820
[    0.464001] PCI: Using MMCONFIG for extended config space
[    0.464001] PCI: Using configuration type 1 for base access
[    0.464001] ACPI: EC: Look up EC in DSDT
[    0.465018] ACPI: BIOS _OSI(Linux) query ignored
[    0.465881] ACPI: Interpreter enabled
[    0.465884] ACPI: (supports S0 S3 S4 S5)
[    0.465901] ACPI: Using IOAPIC for interrupt routing
[    0.466221] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.474292] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.474295] ACPI: EC: driver started in interrupt mode
[    0.474471] ACPI: No dock devices found.
[    0.474480] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.474659] pci 0000:00:01.1: reg 10 io port: [0x3080-0x30bf]
[    0.474669] pci 0000:00:01.1: reg 20 io port: [0x3040-0x307f]
[    0.474674] pci 0000:00:01.1: reg 24 io port: [0x3000-0x303f]
[    0.474684] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.474689] pci 0000:00:01.1: PME# disabled
[    0.474741] pci 0000:00:01.3: reg 10 32bit mmio: [0xf6100000-0xf617ffff]
[    0.474812] pci 0000:00:02.0: reg 10 32bit mmio: [0xf6386000-0xf6386fff]
[    0.474830] pci 0000:00:02.0: supports D1 D2
[    0.474831] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.474834] pci 0000:00:02.0: PME# disabled
[    0.474855] pci 0000:00:02.1: reg 10 32bit mmio: [0xf6389000-0xf63890ff]
[    0.474874] pci 0000:00:02.1: supports D1 D2
[    0.474876] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.474879] pci 0000:00:02.1: PME# disabled
[    0.474903] pci 0000:00:04.0: reg 10 32bit mmio: [0xf6387000-0xf6387fff]
[    0.474920] pci 0000:00:04.0: supports D1 D2
[    0.474922] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.474925] pci 0000:00:04.0: PME# disabled
[    0.474945] pci 0000:00:04.1: reg 10 32bit mmio: [0xf6389400-0xf63894ff]
[    0.474964] pci 0000:00:04.1: supports D1 D2
[    0.474966] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.474969] pci 0000:00:04.1: PME# disabled
[    0.475000] pci 0000:00:06.0: reg 20 io port: [0x30c0-0x30cf]
[    0.475031] pci 0000:00:07.0: reg 10 32bit mmio: [0xf6380000-0xf6383fff]
[    0.475049] pci 0000:00:07.0: PME# supported from D3hot D3cold
[    0.475052] pci 0000:00:07.0: PME# disabled
[    0.475102] pci 0000:00:09.0: reg 10 io port: [0x30f0-0x30f7]
[    0.475106] pci 0000:00:09.0: reg 14 io port: [0x30e4-0x30e7]
[    0.475109] pci 0000:00:09.0: reg 18 io port: [0x30e8-0x30ef]
[    0.475113] pci 0000:00:09.0: reg 1c io port: [0x30e0-0x30e3]
[    0.475116] pci 0000:00:09.0: reg 20 io port: [0x30d0-0x30df]
[    0.475120] pci 0000:00:09.0: reg 24 32bit mmio: [0xf6384000-0xf6385fff]
[    0.475155] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf6388000-0xf6388fff]
[    0.475159] pci 0000:00:0a.0: reg 14 io port: [0x30f8-0x30ff]
[    0.475163] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf6389c00-0xf6389cff]
[    0.475167] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf6389800-0xf638980f]
[    0.475177] pci 0000:00:0a.0: supports D1 D2
[    0.475179] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.475184] pci 0000:00:0a.0: PME# disabled
[    0.475209] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.475211] pci 0000:00:0c.0: PME# disabled
[    0.475233] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.475236] pci 0000:00:0d.0: PME# disabled
[    0.475255] pci 0000:00:12.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
[    0.475260] pci 0000:00:12.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[    0.475265] pci 0000:00:12.0: reg 1c 64bit mmio: [0xf4000000-0xf4ffffff]
[    0.475269] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.475360] pci 0000:00:08.0: transparent bridge
[    0.475396] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff]
[    0.475399] pci 0000:00:0c.0: bridge 32bit mmio: [0xf2000000-0xf3ffffff]
[    0.475402] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[    0.475435] pci 0000:03:00.0: reg 10 64bit mmio: [0xf6000000-0xf600ffff]
[    0.475501] pci 0000:00:0d.0: bridge 32bit mmio: [0xf6000000-0xf60fffff]
[    0.475510] bus 00 -> node 0
[    0.475516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.475607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[    0.475629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[    0.475663] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[    0.505924] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled.
[    0.506135] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *0, disabled.
[    0.506342] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
[    0.506549] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[    0.506756] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
[    0.506966] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[    0.507173] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[    0.507380] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
[    0.507586] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[    0.507793] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
[    0.508010] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
[    0.508225] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
[    0.508438] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10
[    0.508648] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10
[    0.508856] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
[    0.509066] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11
[    0.509274] ACPI: PCI Interrupt Link [Z014] (IRQs 18) *5
[    0.509487] ACPI: PCI Interrupt Link [Z015] (IRQs 22) *10
[    0.509700] ACPI: PCI Interrupt Link [LPMU] (IRQs *11)
[    0.509931] ACPI: WMI: Mapper loaded
[    0.510100] SCSI subsystem initialized
[    0.510135] libata version 3.00 loaded.
[    0.510176] usbcore: registered new interface driver usbfs
[    0.510191] usbcore: registered new interface driver hub
[    0.510212] usbcore: registered new device driver usb
[    0.510315] PCI: Using ACPI for IRQ routing
[    0.510398] Bluetooth: Core ver 2.13
[    0.510398] NET: Registered protocol family 31
[    0.510398] Bluetooth: HCI device and connection manager initialized
[    0.510398] Bluetooth: HCI socket layer initialized
[    0.510398] NET: Registered protocol family 8
[    0.510398] NET: Registered protocol family 20
[    0.510398] NetLabel: Initializing
[    0.510398] NetLabel:  domain hash size = 128
[    0.510398] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.510398] NetLabel:  unlabeled traffic allowed by default
[    0.510398] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.510398] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.512066] AppArmor: AppArmor Filesystem Enabled
[    0.512071] pnp: PnP ACPI init
[    0.512071] ACPI: bus type pnp registered
[    0.516015] Switched to high resolution mode on CPU 0
[    0.516245] pnp: PnP ACPI: found 12 devices
[    0.516246] ACPI: ACPI bus type pnp unregistered
[    0.516250] PnPBIOS: Disabled by ACPI PNP
[    0.516259] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
[    0.516264] system 00:03: ioport range 0x1000-0x107f has been reserved
[    0.516267] system 00:03: ioport range 0x1080-0x10ff has been reserved
[    0.516269] system 00:03: ioport range 0x1400-0x147f has been reserved
[    0.516272] system 00:03: ioport range 0x1480-0x14ff has been reserved
[    0.516274] system 00:03: ioport range 0x1800-0x187f has been reserved
[    0.516277] system 00:03: ioport range 0x1880-0x18ff has been reserved
[    0.516282] system 00:04: ioport range 0x360-0x361 has been reserved
[    0.516285] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    0.516292] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved
[    0.516295] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.516298] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
[    0.516300] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved
[    0.516303] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved
[    0.550994] pci 0000:00:08.0: PCI bridge, secondary bus 0000:02
[    0.550996] pci 0000:00:08.0:   IO window: disabled
[    0.551000] pci 0000:00:08.0:   MEM window: disabled
[    0.551002] pci 0000:00:08.0:   PREFETCH window: disabled
[    0.551006] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[    0.551009] pci 0000:00:0c.0:   IO window: 0x4000-0x4fff
[    0.551012] pci 0000:00:0c.0:   MEM window: 0xf2000000-0xf3ffffff
[    0.551015] pci 0000:00:0c.0:   PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[    0.551019] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03
[    0.551020] pci 0000:00:0d.0:   IO window: disabled
[    0.551023] pci 0000:00:0d.0:   MEM window: 0xf6000000-0xf60fffff
[    0.551026] pci 0000:00:0d.0:   PREFETCH window: disabled
[    0.551033] pci 0000:00:08.0: setting latency timer to 64
[    0.551038] pci 0000:00:0c.0: setting latency timer to 64
[    0.551042] pci 0000:00:0d.0: setting latency timer to 64
[    0.551045] bus: 00 index 0 io port: [0x00-0xffff]
[    0.551047] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.551049] bus: 02 index 0 mmio: [0x0-0x0]
[    0.551051] bus: 02 index 1 mmio: [0x0-0x0]
[    0.551053] bus: 02 index 2 mmio: [0x0-0x0]
[    0.551055] bus: 02 index 3 io port: [0x00-0xffff]
[    0.551057] bus: 02 index 4 mmio: [0x000000-0xffffffff]
[    0.551059] bus: 04 index 0 io port: [0x4000-0x4fff]
[    0.551061] bus: 04 index 1 mmio: [0xf2000000-0xf3ffffff]
[    0.551063] bus: 04 index 2 mmio: [0xf0000000-0xf1ffffff]
[    0.551065] bus: 04 index 3 mmio: [0x0-0x0]
[    0.551066] bus: 03 index 0 mmio: [0x0-0x0]
[    0.551068] bus: 03 index 1 mmio: [0xf6000000-0xf60fffff]
[    0.551070] bus: 03 index 2 mmio: [0x0-0x0]
[    0.551072] bus: 03 index 3 mmio: [0x0-0x0]
[    0.551083] NET: Registered protocol family 2
[    0.551206] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.551464] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.551956] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.552232] TCP: Hash tables configured (established 131072 bind 65536)
[    0.552236] TCP reno registered
[    0.552324] NET: Registered protocol family 1
[    0.552440] checking if image is initramfs... it is
[    1.123719] Freeing initrd memory: 7366k freed
[    1.123753] Simple Boot Flag at 0x36 set to 0x1
[    1.123812] cpufreq: No nForce2 chipset.
[    1.123919] audit: initializing netlink socket (disabled)
[    1.123931] type=2000 audit(1270017591.120:1): initialized
[    1.132188] highmem bounce pool size: 64 pages
[    1.132193] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.133258] VFS: Disk quotas dquot_6.5.1
[    1.133308] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.133843] fuse init (API version 7.10)
[    1.133918] msgmni has been set to 1725
[    1.134076] alg: No test for stdrng (krng)
[    1.134086] io scheduler noop registered
[    1.134088] io scheduler anticipatory registered
[    1.134089] io scheduler deadline registered
[    1.134105] io scheduler cfq registered (default)
[    1.134137] pci 0000:00:00.0: Enabling HT MSI Mapping
[    1.134287] pci 0000:00:07.0: Enabling HT MSI Mapping
[    1.134301] pci 0000:00:08.0: Enabling HT MSI Mapping
[    1.134316] pci 0000:00:09.0: Enabling HT MSI Mapping
[    1.134332] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    1.134346] pci 0000:00:0c.0: Enabling HT MSI Mapping
[    1.134360] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    1.134374] pci 0000:00:12.0: Boot video device
[    1.140284] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[    1.140307] pcieport-driver 0000:00:0c.0: found MSI capability
[    1.140322] pcieport-driver 0000:00:0c.0: irq 2303 for MSI/MSI-X
[    1.140328] pci_express 0000:00:0c.0:pcie00: allocate port service
[    1.140344] pci_express 0000:00:0c.0:pcie03: allocate port service
[    1.140375] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[    1.140396] pcieport-driver 0000:00:0d.0: found MSI capability
[    1.140407] pcieport-driver 0000:00:0d.0: irq 2302 for MSI/MSI-X
[    1.140413] pci_express 0000:00:0d.0:pcie00: allocate port service
[    1.140423] pci_express 0000:00:0d.0:pcie03: allocate port service
[    1.140466] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.140473] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.142003] ACPI: AC Adapter [ACAD] (on-line)
[    1.416902] ACPI: Battery Slot [BAT0] (battery present)
[    1.416976] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.416979] ACPI: Power Button (FF) [PWRF]
[    1.417016] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.417018] ACPI: Sleep Button (CM) [SLPB]
[    1.417054] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    1.418130] ACPI: Lid Switch [LID]
[    1.418183] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    1.418185] ACPI: Power Button (CM) [PWRB]
[    1.418457] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.418477] processor ACPI_CPU:00: registered as cooling_device0
[    1.418480] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.678216] ACPI Exception (thermal-0377): AE_OK, No or invalid critical threshold [20080926]
[    1.678258] isapnp: Scanning for PnP cards...
[    2.030804] isapnp: No Plug & Play device found
[    2.031903] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    2.032749] brd: module loaded
[    2.033027] loop: module loaded
[    2.033098] Fixed MDIO Bus: probed
[    2.033103] PPP generic driver version 2.4.2
[    2.033154] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    2.033186] Driver 'sd' needs updating - please use bus_type methods
[    2.033194] Driver 'sr' needs updating - please use bus_type methods
[    2.033230] ahci 0000:00:09.0: version 3.0
[    2.033586] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
[    2.033596] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
[    2.033635] ahci 0000:00:09.0: irq 2301 for MSI/MSI-X
[    2.033695] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    2.033699] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part 
[    2.033702] ahci 0000:00:09.0: setting latency timer to 64
[    2.034115] scsi0 : ahci
[    2.034212] scsi1 : ahci
[    2.034258] scsi2 : ahci
[    2.034307] scsi3 : ahci
[    2.034384] ata1: SATA max UDMA/133 abar m8192@0xf6384000 port 0xf6384100 irq 2301
[    2.034387] ata2: SATA max UDMA/133 abar m8192@0xf6384000 port 0xf6384180 irq 2301
[    2.034389] ata3: SATA max UDMA/133 abar m8192@0xf6384000 port 0xf6384200 irq 2301
[    2.034392] ata4: SATA max UDMA/133 abar m8192@0xf6384000 port 0xf6384280 irq 2301
[    2.516008] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.516388] ata1.00: ATA-8: WDC WD1200BEVS-60UST0, 01.01A01, max UDMA/100
[    2.516390] ata1.00: 234441648 sectors, multi 16: LBA48 
[    2.516838] ata1.00: configured for UDMA/100
[    2.836008] ata2: SATA link down (SStatus 0 SControl 300)
[    3.156008] ata3: SATA link down (SStatus 0 SControl 300)
[    3.476008] ata4: SATA link down (SStatus 0 SControl 300)
[    3.476096] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-6 01.0 PQ: 0 ANSI: 5
[    3.476181] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    3.476196] sd 0:0:0:0: [sda] Write Protect is off
[    3.476198] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.476219] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.476279] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    3.476292] sd 0:0:0:0: [sda] Write Protect is off
[    3.476294] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.476314] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.476318]  sda: sda1 sda2 < sda5 sda6 > sda3
[    3.561208] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.561251] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.561437] pata_amd 0000:00:06.0: version 0.3.10
[    3.561478] pata_amd 0000:00:06.0: setting latency timer to 64
[    3.561560] scsi4 : pata_amd
[    3.561609] scsi5 : pata_amd
[    3.561929] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[    3.561931] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[    3.740283] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L632H, HS02, max MWDMA2
[    3.740306] ata5: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
[    3.772231] ata5.00: configured for MWDMA2
[    3.772668] ata6: port disabled. ignoring.
[    3.775207] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632H  HS02 PQ: 0 ANSI: 5
[    3.783610] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.783613] Uniform CD-ROM driver Revision: 3.20
[    3.783707] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    3.783747] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    3.784139] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.784494] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[    3.784504] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
[    3.784522] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    3.784524] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    3.784582] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    3.784614] ehci_hcd 0000:00:02.1: debug port 1
[    3.784617] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    3.784636] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6389000
[    3.796012] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    3.796078] usb usb1: configuration #1 chosen from 1 choice
[    3.796103] hub 1-0:1.0: USB hub found
[    3.796111] hub 1-0:1.0: 7 ports detected
[    3.796514] ACPI: PCI Interrupt Link [Z015] enabled at IRQ 22
[    3.796518] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z015] -> GSI 22 (level, low) -> IRQ 22
[    3.796531] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    3.796533] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    3.796572] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[    3.796595] ehci_hcd 0000:00:04.1: debug port 1
[    3.796598] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[    3.796603] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6389400
[    3.808011] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    3.808065] usb usb2: configuration #1 chosen from 1 choice
[    3.808087] hub 2-0:1.0: USB hub found
[    3.808094] hub 2-0:1.0: 2 ports detected
[    3.808170] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.808495] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[    3.808504] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18
[    3.808516] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    3.808519] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    3.808561] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[    3.808584] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6386000
[    3.866040] usb usb3: configuration #1 chosen from 1 choice
[    3.866063] hub 3-0:1.0: USB hub found
[    3.866071] hub 3-0:1.0: 7 ports detected
[    3.866451] ACPI: PCI Interrupt Link [Z014] enabled at IRQ 18
[    3.866454] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z014] -> GSI 18 (level, low) -> IRQ 18
[    3.866465] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    3.866467] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    3.866510] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[    3.866519] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6387000
[    3.922034] usb usb4: configuration #1 chosen from 1 choice
[    3.922060] hub 4-0:1.0: USB hub found
[    3.922067] hub 4-0:1.0: 2 ports detected
[    3.922144] uhci_hcd: USB Universal Host Controller Interface driver
[    3.922210] usbcore: registered new interface driver libusual
[    3.922246] usbcore: registered new interface driver usbserial
[    3.922257] USB Serial support registered for generic
[    3.922271] usbcore: registered new interface driver usbserial_generic
[    3.922273] usbserial: USB Serial Driver core
[    3.922312] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    3.949915] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.949919] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.950023] mice: PS/2 mouse device common for all mice
[    3.950176] rtc_cmos 00:07: RTC can wake from S4
[    3.950205] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    3.950242] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    3.950299] device-mapper: uevent: version 1.0.3
[    3.951016] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[    3.951055] device-mapper: multipath: version 1.0.5 loaded
[    3.951057] device-mapper: multipath round-robin: version 1.0.0 loaded
[    3.951125] EISA: Probing bus 0 at eisa.0
[    3.951131] Cannot allocate resource for EISA slot 1
[    3.951135] Cannot allocate resource for EISA slot 3
[    3.951138] Cannot allocate resource for EISA slot 4
[    3.951149] EISA: Detected 0 cards.
[    3.951202] cpuidle: using governor ladder
[    3.951249] cpuidle: using governor menu
[    3.951701] TCP cubic registered
[    3.951791] NET: Registered protocol family 10
[    3.952154] lo: Disabled Privacy Extensions
[    3.952431] NET: Registered protocol family 17
[    3.952446] Bluetooth: L2CAP ver 2.11
[    3.952448] Bluetooth: L2CAP socket layer initialized
[    3.952450] Bluetooth: SCO (Voice Link) ver 0.6
[    3.952452] Bluetooth: SCO socket layer initialized
[    3.952481] Bluetooth: RFCOMM socket layer initialized
[    3.952487] Bluetooth: RFCOMM TTY layer initialized
[    3.952489] Bluetooth: RFCOMM ver 1.10
[    3.952510] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3600+ processors (1 cpu cores) (version 2.20.00)
[    3.952548] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x10
[    3.952550] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x11
[    3.952552] powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x12
[    3.952554] powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x18
[    3.952586] Using IPI No-Shortcut mode
[    3.952664] registered taskstats version 1
[    3.952773]   Magic number: 2:79:672
[    3.952861] rtc_cmos 00:07: setting system clock to 2010-03-31 06:39:54 UTC (1270017594)
[    3.952864] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.952866] EDD information not available.
[    3.953174] Freeing unused kernel memory: 532k freed
[    3.953297] Write protecting the kernel text: 4128k
[    3.953338] Write protecting the kernel read-only data: 1532k
[    3.989700] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    4.120058] usb 2-2: new high speed USB device using ehci_hcd and address 2
[    4.280771] usb 2-2: configuration #1 chosen from 1 choice
[    4.340043] Marking TSC unstable due to TSC halts in idle
[    4.566441] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[    4.566809] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[    4.566821] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[    4.566825] forcedeth 0000:00:0a.0: setting latency timer to 64
[    5.085020] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:20:a1:f8
[    5.085025] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
[    5.129506] PM: Starting manual resume from disk
[    5.129510] PM: Resume from partition 8:6
[    5.129512] PM: Checking hibernation image.
[    5.129712] PM: Resume from disk failed.
[    5.164111] kjournald starting.  Commit interval 5 seconds
[    5.164122] EXT3-fs: mounted filesystem with ordered data mode.
[    9.496885] udev: starting version 140
[    9.795201] acpi device:25: registered as cooling_device1
[    9.795463] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/input/input6
[    9.820178] ACPI: Video Device [UVGA] (multi-head: yes  rom: no  post: no)
[    9.896082] Linux video capture interface: v2.00
[   10.324877] Linux agpgart interface v0.103
[   10.583550] cfg80211: Calling CRDA to update world regulatory domain
[   10.592349] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   10.718577] cfg80211: World regulatory domain updated:
[   10.718582] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.718585] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.718588] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.718590] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.718593] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.718595] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.739105] uvcvideo: Found UVC 1.00 device CNF7040 (04f2:b055)
[   10.740972] input: CNF7040 as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input8
[   10.741228] usbcore: registered new interface driver uvcvideo
[   10.741252] USB Video Class driver (v0.1.0)
[   11.045522] nvidia: module license 'NVIDIA' taints kernel.
[   11.319733] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
[   11.319746] nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16
[   11.319752] nvidia 0000:00:12.0: setting latency timer to 64
[   11.321944] NVRM: loading NVIDIA UNIX x86 Kernel Module  180.44  Mon Mar 23 14:59:10 PST 2009
[   11.463605] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[   11.463617] ath5k_pci 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19
[   11.463626] ath5k_pci 0000:03:00.0: setting latency timer to 64
[   11.463715] ath5k_pci 0000:03:00.0: registered as 'phy0'
[   11.503268] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   11.505644] phy0: Selected rate control algorithm 'pid'
[   11.605913] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   11.641884] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[   11.641896] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[   11.641961] HDA Intel 0000:00:07.0: setting latency timer to 64
[   12.293556] lp: driver loaded but no devices found
[   12.383671] Adding 497972k swap on /dev/sda6.  Priority:-1 extents:1 across:497972k
[   12.541198] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[   12.620956] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[   12.927668] EXT3 FS on sda5, internal journal
[   14.146460] type=1505 audit(1270010404.691:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1852
[   14.203762] type=1505 audit(1270010404.747:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1856
[   14.203908] type=1505 audit(1270010404.747:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1856
[   14.203959] type=1505 audit(1270010404.747:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1856
[   14.204031] type=1505 audit(1270010404.751:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1856
[   14.360814] type=1505 audit(1270010404.907:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1861
[   14.361009] type=1505 audit(1270010404.907:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1861
[   14.392435] type=1505 audit(1270010404.939:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1865
[   17.865893] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.865896] Bluetooth: BNEP filters: protocol multicast
[   17.891469] Bridge firewalling registered
[   19.831843] ppdev: user-space parallel port driver
[   23.484927] forcedeth 0000:00:0a.0: irq 2300 for MSI/MSI-X
[   23.485148] eth0: no link during initialization.
[   23.485636] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.537166] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   84.500033] Clocksource tsc unstable (delta = -299984156 ns)

Module                  Size  Used by
binfmt_misc            16776  1 
ppdev                  15492  0 
bridge                 56340  0 
stp                    10500  1 bridge
bnep                   20224  2 
input_polldev          11912  0 
joydev                 18368  0 
lp                     17156  0 
parport                42220  2 ppdev,lp
snd_hda_intel         435508  2 
arc4                    9856  2 
snd_pcm_oss            46336  0 
snd_mixer_oss          22656  1 snd_pcm_oss
ecb                    10752  2 
snd_pcm                82820  2 snd_hda_intel,snd_pcm_oss
ath5k                 107008  0 
snd_seq_dummy          10756  0 
mac80211              217080  1 ath5k
snd_seq_oss            37760  0 
led_class              12036  1 ath5k
snd_seq_midi           14336  0 
snd_rawmidi            29696  1 snd_seq_midi
psmouse                61972  0 
nvidia               7233756  38 
snd_seq_midi_event     15104  2 snd_seq_oss,snd_seq_midi
snd_seq                56880  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              29704  2 snd_pcm,snd_seq
snd_seq_device         14988  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
uvcvideo               63240  0 
k8temp                 12416  0 
pcspkr                 10496  0 
cfg80211               38032  2 ath5k,mac80211
serio_raw              13316  0 
agpgart                42696  1 nvidia
compat_ioctl32          9344  1 uvcvideo
snd                    62628  13 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              15200  1 snd
snd_page_alloc         16904  2 snd_hda_intel,snd_pcm
videodev               41600  1 uvcvideo
v4l1_compat            21764  2 uvcvideo,videodev
video                  25360  5 
output                 11008  1 video
forcedeth              61712  0 
fbcon                  46112  0 
tileblit               10752  1 fbcon
font                   16384  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux