Juan, PAP = Password Authentication Protocol http://www.cisco.com/en/US/tech/tk713/tk507/technologies_tech_note09186a00800ae945.shtml Also, Jacques has emailed the following /* Juan I repeat: you must NOT have Stupid Home active when you dial. In the report which you sent, IT IS ACTIVE. You can see it yourself by this: Carrier detected. Starting PPP immediately. There is no prompt for the username and the password. This is exactly what Stupid Mode = yes does : ii starts immediately without waiting for a prompt for username and password. Pleas ebe careful and systematic in your work. Antonio, please translate. Jacques */ Jacques dice que tienes Stupid Mode = yes en tu archivo /etc/wvdial.conf quitalo o comentalo con "#" o un ";" antes de Stupid Mode asi # Stupid Mode = yes o ; Stupid Mode = yes asi esta linea no esta activa. Esto es lo que impide que pregunte por nombre de usuario(username) y la clave(password). Trata de ser sistematico en tu atemptos para conectarte. Saludos/Regards, Antonio On 2/13/10, islanis <islanis@xxxxxxxxxxxxxx> wrote: > this is the initial "wvdial" that i put > > root@juan-desktop:/etc/ppp# wvdial > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > OK > --> Modem initialized. > --> Sending: ATDT060110 > --> Waiting for carrier. > ATDT060110 > CONNECT 52000 > --> Carrier detected. Starting PPP immediately. > --> Starting pppd at Sat Feb 13 07:31:02 2010 > --> Pid of pppd: 4372 > --> pppd: ?1X X1X [08]0X > --> Using interface ppp0 > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> Authentication (PAP) started > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> Authentication (PAP) failed (Message: "Auth-Reject from Radius > Server." ) > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> Terminate Request (Message: "Failed to authenticate ourselves to peer" ) > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> Disconnecting at Sat Feb 13 07:31:05 2010 > --> Authentication error. > --> We failed to authenticate ourselves to the peer. > --> Maybe bad account or password? > --> Auto Reconnect will be attempted in 5 seconds > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > NO CARRIER > --> Sending: ATQ0 > ATQ0 > OK > --> Re-Sending: ATZ > ATZ > OK > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > OK > --> Modem initialized. > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > OK > --> Modem initialized. > --> Sending: ATDT060110 > --> Waiting for carrier. > ATDT060110 > CONNECT 50667 > --> Carrier detected. Starting PPP immediately. > --> Starting pppd at Sat Feb 13 07:31:44 2010 > --> Pid of pppd: 4386 > --> pppd: ?1X X1X [08]0X > --> Using interface ppp0 > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> Authentication (PAP) started > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> Authentication (PAP) failed (Message: "Auth-Reject from Radius > Server." ) > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> Terminate Request (Message: "Failed to authenticate ourselves to peer" ) > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> pppd: ?1X X1X [08]0X > --> Disconnecting at Sat Feb 13 07:31:47 2010 > --> Authentication error. > --> We failed to authenticate ourselves to the peer. > --> Maybe bad account or password? > --> Auto Reconnect will be attempted in 10 seconds > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > NO CARRIER > --> Sending: ATQ0 > ATQ0 > OK > --> Re-Sending: ATZ > ATZ > OK > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > OK > --> Modem initialized. > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 > OK > --> Modem initialized. > --> Sending: ATDT060110 > --> Waiting for carrier. > ATDT060110 > ^CCaught signal 2: Attempting to exit gracefully... > --> Disconnecting at Sat Feb 13 07:32:08 2010 > ////*********///////////***********//////////********////////**********///////////**********//////// > and this comes out in syslog when i activate the debug in /etc/ppp/option > and i put wvdial Infomed > > > Feb 13 07:30:01 juan-desktop /USR/SBIN/CRON[3747]: (root) CMD (test -x > /etc/init.d/anacron && /usr/sbin/invoke-rc.d anacron start >/dev/null) > Feb 13 07:30:01 juan-desktop /USR/SBIN/CRON[3749]: (root) CMD ([ -x > /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null) > Feb 13 07:31:02 juan-desktop pppd[4372]: pppd 2.4.5 started by root, uid 0 > Feb 13 07:31:02 juan-desktop pppd[4372]: using channel 1 > Feb 13 07:31:02 juan-desktop pppd[4372]: Using interface ppp0 > Feb 13 07:31:02 juan-desktop pppd[4372]: Connect: ppp0 <--> /dev/pts/0 > Feb 13 07:31:02 juan-desktop pppd[4372]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic 0x441c83a3> <pcomp> <accomp>] > Feb 13 07:31:03 juan-desktop pppd[4372]: rcvd [LCP ConfReq id=0xb5 <mru > 1500> <asyncmap 0xffffffff> <auth pap> <magic 0x1cb954f2> <mrru 1500> > <ssnhf> <endpoint [local]>] > Feb 13 07:31:03 juan-desktop pppd[4372]: sent [LCP ConfRej id=0xb5 <mrru > 1500> <ssnhf>] > Feb 13 07:31:03 juan-desktop pppd[4372]: rcvd [LCP ConfRej id=0x1 <pcomp> > <accomp>] > Feb 13 07:31:03 juan-desktop pppd[4372]: sent [LCP ConfReq id=0x2 <asyncmap > 0x0> <magic 0x441c83a3>] > Feb 13 07:31:03 juan-desktop pppd[4372]: rcvd [LCP ConfReq id=0xb6 <mru > 1500> <asyncmap 0xffffffff> <auth pap> <magic 0x1cb911d1> <endpoint > [local]>] > Feb 13 07:31:03 juan-desktop pppd[4372]: sent [LCP ConfAck id=0xb6 <mru > 1500> <asyncmap 0xffffffff> <auth pap> <magic 0x1cb911d1> <endpoint > [local]>] > Feb 13 07:31:03 juan-desktop pppd[4372]: rcvd [LCP ConfAck id=0x2 <asyncmap > 0x0> <magic 0x441c83a3>] > Feb 13 07:31:03 juan-desktop pppd[4372]: sent [LCP EchoReq id=0x0 > magic=0x441c83a3] > Feb 13 07:31:03 juan-desktop pppd[4372]: sent [PAP AuthReq id=0x1 > user="islanis@xxxxxxxxxxxxxx" password=<hidden>] > Feb 13 07:31:04 juan-desktop pppd[4372]: rcvd [LCP EchoRep id=0x0 > magic=0x1cb911d1] > Feb 13 07:31:04 juan-desktop pppd[4372]: rcvd [PAP AuthNak id=0x1 > "Auth-Reject from Radius Server."] > Feb 13 07:31:04 juan-desktop pppd[4372]: Remote message: Auth-Reject from > Radius Server. > Feb 13 07:31:04 juan-desktop pppd[4372]: PAP authentication failed > Feb 13 07:31:04 juan-desktop pppd[4372]: sent [LCP TermReq id=0x3 "Failed to > authenticate ourselves to peer"] > Feb 13 07:31:05 juan-desktop pppd[4372]: rcvd [LCP TermAck id=0x3] > Feb 13 07:31:05 juan-desktop pppd[4372]: Connection terminated. > Feb 13 07:31:05 juan-desktop pppd[4372]: Exit. > Feb 13 07:31:44 juan-desktop pppd[4386]: pppd 2.4.5 started by root, uid 0 > Feb 13 07:31:44 juan-desktop pppd[4386]: using channel 2 > Feb 13 07:31:44 juan-desktop pppd[4386]: Using interface ppp0 > Feb 13 07:31:44 juan-desktop pppd[4386]: Connect: ppp0 <--> /dev/pts/0 > Feb 13 07:31:44 juan-desktop pppd[4386]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic 0xd438a5f> <pcomp> <accomp>] > Feb 13 07:31:44 juan-desktop pppd[4386]: rcvd [LCP ConfReq id=0xfa <mru > 1500> <asyncmap 0xffffffff> <auth pap> <magic 0x1cb9f71e> <mrru 1500> > <ssnhf> <endpoint [local]>] > Feb 13 07:31:44 juan-desktop pppd[4386]: sent [LCP ConfRej id=0xfa <mrru > 1500> <ssnhf>] > Feb 13 07:31:44 juan-desktop pppd[4386]: rcvd [LCP ConfRej id=0x1 <pcomp> > <accomp>] > Feb 13 07:31:44 juan-desktop pppd[4386]: sent [LCP ConfReq id=0x2 <asyncmap > 0x0> <magic 0xd438a5f>] > Feb 13 07:31:45 juan-desktop pppd[4386]: rcvd [LCP ConfReq id=0xfb <mru > 1500> <asyncmap 0xffffffff> <auth pap> <magic 0x1cb9baed> <endpoint > [local]>] > Feb 13 07:31:45 juan-desktop pppd[4386]: sent [LCP ConfAck id=0xfb <mru > 1500> <asyncmap 0xffffffff> <auth pap> <magic 0x1cb9baed> <endpoint > [local]>] > Feb 13 07:31:45 juan-desktop pppd[4386]: rcvd [LCP ConfAck id=0x2 <asyncmap > 0x0> <magic 0xd438a5f>] > Feb 13 07:31:45 juan-desktop pppd[4386]: sent [LCP EchoReq id=0x0 > magic=0xd438a5f] > Feb 13 07:31:45 juan-desktop pppd[4386]: sent [PAP AuthReq id=0x1 > user="islanis@xxxxxxxxxxxxxx" password=<hidden>] > Feb 13 07:31:45 juan-desktop pppd[4386]: rcvd [LCP EchoRep id=0x0 > magic=0x1cb9baed] > Feb 13 07:31:46 juan-desktop pppd[4386]: rcvd [PAP AuthNak id=0x1 > "Auth-Reject from Radius Server."] > Feb 13 07:31:46 juan-desktop pppd[4386]: Remote message: Auth-Reject from > Radius Server. > Feb 13 07:31:46 juan-desktop pppd[4386]: PAP authentication failed > Feb 13 07:31:46 juan-desktop pppd[4386]: sent [LCP TermReq id=0x3 "Failed to > authenticate ourselves to peer"] > Feb 13 07:31:47 juan-desktop pppd[4386]: rcvd [LCP TermAck id=0x3] > Feb 13 07:31:47 juan-desktop pppd[4386]: Connection terminated. > Feb 13 07:31:47 juan-desktop pppd[4386]: Exit. > Feb 13 07:33:34 juan-desktop ntfs-3g[3090]: ntfs_mst_post_read_fixup: > Argumento inválido > Feb 13 07:33:35 juan-desktop ntfs-3g[3090]: ntfs_mst_post_read_fixup: > Argumento inválido > > /////////////////////////////////////////////////////////////////////////////////////////// > and i try to connect again and i got this > > root@juan-desktop:/home/juan# wvdial Infomed > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT060110 > --> Waiting for carrier. > ATDT060110 > CONNECT 52000 > --> Carrier detected. Starting PPP immediately. > --> Starting pppd at Sat Feb 13 07:57:02 2010 > --> Pid of pppd: 5236 > --> Using interface ppp0 > --> Authentication (PAP) started > --> Authentication (PAP) failed (Message: "Auth-Reject from Radius > Server." ) > --> Terminate Request (Message: "Failed to authenticate ourselves to peer" ) > --> Disconnecting at Sat Feb 13 07:57:05 2010 > --> Authentication error. > --> We failed to authenticate ourselves to the peer. > --> Maybe bad account or password? > --> Auto Reconnect will be attempted in 5 seconds > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > NO CARRIER > --> Sending: ATQ0 > ATQ0 > OK > --> Re-Sending: ATZ > ATZ > OK > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT060110 > --> Waiting for carrier. > ATDT060110 > ^CCaught signal 2: Attempting to exit gracefully... > --> Disconnecting at Sat Feb 13 07:57:21 2010 > i am from havana city, more especific from boyeros > /////////////////////////////////////////////////////////////////////// > the content of chap-secrets from /etc/ppp/chap-secrets is this > > # Secrets for authentication using CHAP > # client server secret IP addresses > > islanis\@infomed\.sld\.cu * 12 > and the content of pap-secrets from /etc/ppp/pap-secrets it this > > * hostname "" * > > guest hostname "*" - > master hostname "*" - > root hostname "*" - > support hostname "*" - > stats hostname "*" - > > # * password > > > islanis\@infomed\.sld\.cu * 12 > > > ///////////////////////////////////////////////////////// > and de mydebug.txt comes in adjunt > > > > > > > ----- Original Message ----- > From: "Antonio Olivares" <olivares14031@xxxxxxxxx> > To: "Jacques Goldberg" <Jacques.Goldberg@xxxxxxx> > Cc: "islanis" <islanis@xxxxxxxxxxxxxx>; <discuss@xxxxxxxxxxxxx>; "Marvin > Stodolsky" <marvin.stodolsky@xxxxxxxxx> > Sent: Sunday, February 14, 2010 2:04 PM > Subject: Re: help motorola sm56 is not conecting > > > Jacques, > > I am copying item 13 here: > > failed to authenticate? verify that there is no matching entry in > /etc/ppp/chap-secrets. If you see your username and password in that > file, comment the line with a leading # and retry. Warning: wvdial > version 1.40 creates the line again, so use a more recent version. > Note: some ISP servers use a copyrighted encryption algorithm for chap > authentication, not supported by Linux pppd (at this time, at least). > > and translating to Spanish so that Juan can understand: > > Juan hemos fallado en autenticarnos al ISP(informed.sld.cu). > Necessitas ver el archivo /etc/ppp/chap-secrets. Si miras tu nombre > de usuario: islanis o islanis@xxxxxxxxxxxxxx y tu clave que usas > para conectarte. Trata de editar este archivo, como > $ sudo gedit /etc/ppp/chap-secrets > y ponerle un "#" antes del nombre de tu usuario y la clave y trata de > conectarte otra vez. Si tienes wvdial version 1.40, esta version > vuelve a poner el nombre del usuario y tu clave para autenticarte ante > tu ISP. Por ejemplo aqui esta el mio nomas para que mires como se ve: > > [root@localhost ~]# cat /etc/ppp/chap-secrets > # Secrets for authentication using CHAP > # client server secret IP addresses > mi-nombre-de-usuario 0 ********* > > > nomas que puse para username: mi-nombre-de-usuario y la clave puse > ********, tu tambien puedes hacer lo mismo. > > Jaques te recomienda que agreges la palabra "debug" al archivo > /etc/ppp/options, usa > $ sudo gedit /etc/ppp/options > > y poner la palabra debug en donde sea: > > add a line debug in /etc/ppp/options if not already there. > > en el archivo mio tengo "lock": > > [root@localhost ~]# cat /etc/ppp/options > lock > > Depues de hacer esto, Juan hay que hacer tres cosas mas, y se necesita > que sigas los consejos dados por Jacques para ver si se puede corregir > esta dificultad que tu tienes: > > English/Ingles > 1 open an additional window as root or su > 2 in this window enter tail -f /var/log/messages | tee mydebug.txt > 3 return to first window and start wvdial > > Spanish/Español > 1 abrir una ventana adicional como root o su , en caso de usted sudo > 2 en la ventana nueva/tab nueva poner lo siguiente > $ sudo tail -f /var/log/messages | tee mydebug.txt > 3 regrasar ala primer ventana/session y empezar wvdial > > Cuando wvdial termine y te de lo mismo que te ha dado, envianos el > archivo mydebug.txt para ver que esta sucediendo. > > =================== > > Antonio: perhaps some time can be saved by asking the ISP if they use > pap or chap secrets. > > Also it may be necessasry to check if the version of pppd used by > Juan is compiled for chap-secrets . I have not followed that since > long and I do not know if ms-chap is still copyrighted and then must > be worked around. > > Jacques: The ISP is not getting back to me, they have sent me back my mails > :( > > Delivery to the following recipient failed permanently: > > problemas@xxxxxxxxxxxxxx > > Technical details of permanent failure: > Google tried to deliver your message, but it was rejected by the > recipient domain. We recommend contacting the other email provider for > further information about the cause of this error. The error that the > other server returned was: 550 550 Access denied (state 17). > > ----- Original message ----- > > MIME-Version: 1.0 > Received: by 10.216.88.202 with SMTP id a52mr2163963wef.101.1266121826697; > Sat, 13 Feb 2010 20:30:26 -0800 (PST) > In-Reply-To: <eventum.1m5xkw7j.old6oh@xxxxxxxxxxxxxx> > References: <27F168F0D6EC4534859E3B1ED69F5F54@ale> > <eventum.1m5xkw7j.old6oh@xxxxxxxxxxxxxx> > Date: Sat, 13 Feb 2010 22:30:26 -0600 > Message-ID: <75107331002132030o2c0473a7y8dc0df3769035037@xxxxxxxxxxxxxx> > Subject: Re: [#3099] Issue Created: Re: help motorola sm56 is not conecting > From: Antonio Olivares <olivares14031@xxxxxxxxx> > To: "problemas@xxxxxxxxxxxxxx" <problemas@xxxxxxxxxxxxxx> > Cc: islanis <islanis@xxxxxxxxxxxxxx> > Content-Type: text/plain; charset=ISO-8859-1 > Content-Transfer-Encoding: quoted-printable > > ========================= > > > Juan, > > ya cambiaste el wvdial y te sigue dando lo mismo. Cambiaste el telefono de > 061110 a 0160110? > > Note que la única diferencia al acceder por la plataforma ya sea por > el 0160110 desde cualquier provincia o por el 060110 desde Ciudad de > La Habana consiste en que debe poner su dirección de correo > electrónico de la forma siguiente: juanperez@xxxxxxxxxxxxxx > > tambien como Jaques te dijo, en un wvdial.conf tenias Informed, > Informed2, con dos diferentes versiones uno con > usuario islandis y otro con usuario islandis@xxxxxxxxxxxxxxx > > Usa el mismo que usas con Windows, y si todo sale bien lograras > conectarte con Ubuntu ala red. La clave tambien tiene que ser la > misma. Es dificil para nosotros saber si vives en provincia o Havana > para poder decirte con seguridad si debes usar el numero 06110 o el > otro numero 0161110 . > > Ojala que te puedas conectar, si no envianos el archivo mydebug.txt, y > luego Jacques/Marv/u otro usuario nos avisara como proceder. > > Attentamente/Regards, > > Antonio > > > > On 2/14/10, Jacques Goldberg <Jacques.Goldberg@xxxxxxx> wrote: >> Juan, at this place, first of all, clearly your modem technically works >> fine. >> >> No more problem with the driver. >> >> Debugging the authentication is not trivial. >> >> >> Antonio, please continue your kind help to Juan in Spanish. In the name >> of all of us, I thank you very much. >> >> >> The problem is discussed in item 13 of section TROUBLESHOOTING at >> http://linmodems.technion.ac.il/post-install.html >> >> The debugging goes as follows: >> >> >> Follow section FOR THE IMPATIENT in the same Web page, always as root >> (with sudo if Ubuntu, or after su ): >> >> Execute item 10 (inserting debug in file /etc/ppp/options : >> one line anywhere with the word debug >> >> Jump to executing steps 13, 14, 15 >> >> After seeing --> The PPP daemon has died. (exit code = 19) >> in the window where wvdial has worked, kill the tail command in the >> window where it is running, using CTRL-C >> >> Send us the file mydebug.txt >> >> With that file, using the SECOND link in item 13 of section >> TROUBLESHOOTING, the reason why authentication fails can be found. As >> item 13 suggests, it is very likely that the problem comes from >> incorrect pap-secrets & chap-secrets. >> >> >> Antonio: perhaps some time can be saved by asking the ISP if they use >> pap or chap secrets. >> >> Also it may be necessasry to check if the version of pppd used by Juan >> is compiled for chap-secrets . I have not followed that since long and >> I do not know if ms-chap is still copyrighted and then must be worked >> around. >> >> >> Good luck >> >> Jacques >> >> >> >> islanis wrote: >> >>> i made this antonio >>> >>> [Dialer defaults] >>> Init1 = ATZ >>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>> Modem Type = Analog >>> Baud = 460800 >>> Modem = /dev/ttySL0 >>> ISDN = 0 >>> Phone = 060110 >>> Password = 12 >>> Username = islanis@xxxxxxxxxxxxxx >>> Carrier Check = no >>> #Stupid Mode = yes >>> >>> and it return this: >>> >>> root@juan-desktop:/home/juan# wvdial >>> --> WvDial: Internet dialer version 1.60 >>> --> Cannot get information for serial port. >>> --> Initializing modem. >>> --> Sending: ATZ >>> ATZ >>> OK >>> --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>> ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>> OK >>> --> Modem initialized. >>> --> Sending: ATDT060110 >>> --> Waiting for carrier. >>> ATDT060110 >>> CONNECT 50667 >>> --> Carrier detected. Waiting for prompt. >>> ************************************************ >>> * Product Name :Quidway A8010; * >>> * Product Provider:HuaWei; * >>> * Internet Server :######; * >>> ************************************************ >>> Welcome to INTERNET! >>> Please input username: >>> --> Looks like a login prompt. >>> --> Sending: islanis@xxxxxxxxxxxxxx >>> Please input password: >>> --> Looks like a password prompt. >>> --> Sending: (password) >>> ********************** >>> Can't contact authentication server. >>> Authentication failed! >>> Please input username: >>> --> Looks like a login prompt. >>> --> Sending: islanis@xxxxxxxxxxxxxx >>> islanis@xxxxxxxxxxxxxx >>> Please input password: >>> --> Looks like a password prompt. >>> --> Sending: (password) >>> ** >>> Auth-Reject from Radius Server. >>> Authentication failed! >>> Please input username: >>> --> Looks like a login prompt. >>> --> Sending: islanis@xxxxxxxxxxxxxx >>> --> Don't know what to do! Starting pppd and hoping for the best. >>> --> Starting pppd at Fri Feb 12 21:06:45 2010 >>> --> Pid of pppd: 3187 >>> --> Using interface ppp0 >>> --> pppd: ?!2[08]?!2[08]X 2[08] >>> --> pppd: ?!2[08]?!2[08]X 2[08] >>> --> pppd: ?!2[08]?!2[08]X 2[08] >>> --> pppd: ?!2[08]?!2[08]X 2[08] >>> --> pppd: ?!2[08]?!2[08]X 2[08] >>> --> Disconnecting at Fri Feb 12 21:06:49 2010 >>> --> The PPP daemon has died: Authentication error. >>> --> We failed to authenticate ourselves to the peer. >>> --> Maybe bad account or password? (exit code = 19) >>> --> man pppd explains pppd error codes in more detail. >>> --> I guess that's it for now, exiting >>> --> The PPP daemon has died. (exit code = 19) >>> >>> and with Stupid Mode = yes >>> i got this: >>> root@juan-desktop:/home/juan# wvdial >>> --> WvDial: Internet dialer version 1.60 >>> --> Cannot get information for serial port. >>> --> Initializing modem. >>> --> Sending: ATZ >>> ATZ >>> OK >>> --> Sending: ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>> ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>> OK >>> --> Modem initialized. >>> --> Sending: ATDT060110 >>> --> Waiting for carrier. >>> ATDT060110 >>> CONNECT 52000 >>> --> Carrier detected. Starting PPP immediately. >>> --> Starting pppd at Fri Feb 12 21:09:22 2010 >>> --> Pid of pppd: 3203 >>> --> Using interface ppp0 >>> --> pppd: ?1?[08]X1?[08][08]0?[08] >>> --> pppd: ?1?[08]X1?[08][08]0?[08] >>> --> pppd: ?1?[08]X1?[08][08]0?[08] >>> --> pppd: ?1?[08]X1?[08][08]0?[08] >>> --> pppd: ?1?[08]X1?[08][08]0?[08] >>> --> Disconnecting at Fri Feb 12 21:09:28 2010 >>> --> The PPP daemon has died: Authentication error. >>> --> We failed to authenticate ourselves to the peer. >>> --> Maybe bad account or password? (exit code = 19) >>> --> man pppd explains pppd error codes in more detail. >>> --> I guess that's it for now, exiting >>> --> The PPP daemon has died. (exit code = 19) >>> >>> what else..pls >>> >>> >>> >>> >>> >>> ----- Original Message ----- >>> From: "Antonio Olivares" <olivares14031@xxxxxxxxx> >>> To: "islanis" <islanis@xxxxxxxxxxxxxx> >>> Cc: <discuss@xxxxxxxxxxxxx>; "Marvin Stodolsky" >>> <marvin.stodolsky@xxxxxxxxx>; <problemas@xxxxxxxxxxxxxx> >>> Sent: Sunday, February 14, 2010 5:41 AM >>> Subject: Re: help motorola sm56 is not conecting >>> >>> >>> Juan, Marv, Jacques, et. all, >>> >>> I have made contact with the ISP which Juan uses to see how this >>> problem can be resolved. Upon looking at the requirements, I have >>> made some recommendations to Juan (modifying his wvdial.conf file) and >>> see if he can connect with them or not? I wrote the instructions in >>> Spanish so Juan should not have difficulties. I hope this helps in >>> some way. >>> >>> Me he communicado via electronica con informed.sld para ver si te algo >>> se puede modificar para que puedas lograr una coneccion con Linux. Yo >>> hara los siguientes cambios. Cambiara el archivo /etc/wvdial.conf >>> >>> de lo que nos enviaste >>> >>> [Dialer Infomed] >>> Init1 = ATZ >>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>> Modem Type = Analog >>> Baud = 460800 >>> New PPPD = yes >>> Modem = /dev/ttySL0 >>> ISDN = 0 >>> Phone = 060110 >>> Password = 12 >>> Username = islanis@xxxxxxxxxxxxxx >>> #Stupid Mode = yes >>> Password Prompt = 12 >>> Carrier Check = no >>> >>> [Dialer Infomed1] >>> Init1 = ATZ >>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>> Modem Type = Analog >>> Baud = 460800 >>> New PPPD = yes >>> Modem = /dev/ttySL0 >>> ISDN = 0 >>> Phone = 8314949 >>> Password = 12 >>> Username = islanis >>> #Stupid Mode = yes >>> Password Prompt = 12 >>> Carrier Check = no >>> >>> >>> >>> a >>> >>> [Dialer defaults] >>> Init1 = ATZ >>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>> Modem Type = Analog >>> Baud = 460800 >>> Modem = /dev/ttySL0 >>> ISDN = 0 >>> Phone = 060110 >>> Password = 12 >>> Username = islanis@xxxxxxxxxxxxxx >>> Carrier Check = no >>> #Stupid Mode = yes >>> >>> pero antes de hacer los cambios haz lo siguiente. >>> $ sudo cp /etc/wvdial.conf /etc/wvdial.old >>> y haces las modificaciones y tratas de connectarte. Si no funciona, >>> cambias el numero de >>> >>> 060110 >>> >>> a >>> >>> 060110 >>> >>> porque el nombre de usuario(username) esta correcto. Esto es lo que >>> exije informed.sld.cu: >>> >>> Excepciones del proxy: *.sld.cu >>> Note que la única diferencia al acceder por la plataforma ya sea por >>> el 0160110 desde cualquier provincia o por el 060110 desde Ciudad de >>> La Habana consiste en que debe poner su dirección de correo >>> electrónico de la forma siguiente: juanperez@xxxxxxxxxxxxxx >>> >>> Trata de hacer estos cambios y dejanos saber si funciona o no? >>> >>> De no funcionar trata de eliminar el "#" de Stupid Mode = yes y tratar >>> asi y haber si te puedes connectar? >>> >>> >>> Attentamente/Regards, >>> >>> Antonio >>> >>> >>> >>> >>> On 2/12/10, islanis <islanis@xxxxxxxxxxxxxx> wrote: >>> >>>> i cant conect yet please help >>>> ----- Original Message ----- >>>> From: "Antonio Olivares" <olivares14031@xxxxxxxxx> >>>> To: <discuss@xxxxxxxxxxxxx> >>>> Cc: "islanis" <islanis@xxxxxxxxxxxxxx>; "Marvin Stodolsky" >>>> <marvin.stodolsky@xxxxxxxxx>; <problemas@xxxxxxxxxxxxxx> >>>> Sent: Saturday, February 13, 2010 8:03 PM >>>> Subject: Re: help motorola sm56 is not conecting >>>> >>>> >>>> Jacques, Juan, Marv & et all >>>> >>>> I can help translate a bit if it is needed as I have added a cc: to >>>> problemas@xxxxxxxxxxxxxxx which is the ISP. >>>> >>>> I am asking politely to the ISP informed.sld.cu for help/requirements >>>> to try and help out Juan get his connection working using Linux. I am >>>> asking for basic requirements like password, username and phone no. >>>> Upon getting some information, I will relay back to Juan & list and >>>> see how we can help diagnoze his difficulties. >>>> >>>> Estimados amigos del a red informed.sld.cu. El usuario Juan se puede >>>> connectar con Windows, pero tiene dificultades para conectarse con >>>> Linux. Si hay requiremientos para poder tener asesso ala red, que >>>> tiene que tener? >>>> >>>> Por ejemplo: >>>> >>>> >>>> Username = islanis@xxxxxxxxxxxxxx >>>> Password = 12 >>>> Phone = 060110 >>>> >>>> o el nombre del usuario >>>> Username = islanis >>>> ? >>>> >>>> la clave(password) debe ser igual que la que tiene en windows? >>>> Password = 12 >>>> Phone = 060110 >>>> >>>> y el telefono que este igual tambien que en windows. >>>> >>>> Nomas queremos saber que es lo que se exije para poder ayuadar a Juan >>>> poder conectarse al internet con Linux. No es ninguna queja formal ni >>>> mucho menos. >>>> >>>> Gracias por ayudar. >>>> >>>> Attentamente, >>>> >>>> Antonio Olivares >>>> >>>> >>>> >>>> >>>> On 2/13/10, Jacques Goldberg <Jacques.Goldberg@xxxxxxx> wrote: >>>> >>>>> In your file wvdial.conf there are two sections named Infomed and >>>>> Infomed1 >>>>> >>>>> In Infomed the username is islanis@xxxxxxxxxxxxxx coupled to the >>>>> phone >>>>> number 060110 >>>>> >>>>> This is the section which you used in your attempt to connect. >>>>> >>>>> Then you have a section Infomed1 where the username is islanis , not >>>>> the >>>>> same (only islanis, not your complete email address). >>>>> >>>>> Are you sure that the one which you use (islanis@xxxxxxxxxxxxxx) is the >>>>> correct one which Infomed has given to you? >>>>> >>>>> Also the password which you use, 12 , is a bit strange: usually the >>>>> ISP (your ISP is Infomed) give a more sophisticated password not so >>>>> simple, >>>>> >>>>> Furthermore the password promt is strange: who told you to have a >>>>> Password Prompt line like that ? Infomed? >>>>> >>>>> The command Password Prompt is for use in the very infrequent cases >>>>> when, when asking for your password, the ISP does not ask something >>>>> like password? or password: or the same with login in place of >>>>> password or longer lines of text including one of the words login, >>>>> logon, or password. Of course, if Infomed uses a Spanish word it might >>>>> be a reason to use Password Prompt. I have looked into >>>>> http://www.infomed.sld.cu hoping to find the answer myself but I do >>>>> not >>>>> understand Spanish and I did not see anything which could be related to >>>>> the use of a modem. >>>>> >>>>> >>>>> >>>>> The most probable cuase of your failure is still that you do not need >>>>> the line Password Prompt (which perrhaps changes nothing to the >>>>> failure) >>>>> and either the Username or the Password or both as reported in section >>>>> Infomed of your file are incorrect. If you are not 100% sure, ask >>>>> Infomed >>>>> ! >>>>> >>>>> >>>>> Jacques >>>>> >>>>> >>>>> islanis wrote: >>>>> >>>>> >>>>>> these are my wvdial.conf >>>>>> >>>>>> [Dialer Infomed] >>>>>> Init1 = ATZ >>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>> Modem Type = Analog >>>>>> Baud = 460800 >>>>>> New PPPD = yes >>>>>> Modem = /dev/ttySL0 >>>>>> ISDN = 0 >>>>>> Phone = 060110 >>>>>> Password = 12 >>>>>> Username = islanis@xxxxxxxxxxxxxx >>>>>> #Stupid Mode = yes >>>>>> Password Prompt = 12 >>>>>> Carrier Check = no >>>>>> >>>>>> [Dialer Infomed1] >>>>>> Init1 = ATZ >>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>> Modem Type = Analog >>>>>> Baud = 460800 >>>>>> New PPPD = yes >>>>>> Modem = /dev/ttySL0 >>>>>> ISDN = 0 >>>>>> Phone = 8314949 >>>>>> Password = 12 >>>>>> Username = islanis >>>>>> #Stupid Mode = yes >>>>>> Password Prompt = 12 >>>>>> Carrier Check = no >>>>>> >>>>>> and this is what i got with one and woth the other and nothing >>>>>> >>>>>> with the first >>>>>> >>>>>> root@juan-desktop:/home/juan# wvdial infomed >>>>>> --> WvDial: Internet dialer version 1.60 >>>>>> --> Cannot get information for serial port. >>>>>> --> Initializing modem. >>>>>> --> Sending: ATZ >>>>>> ATZ >>>>>> OK >>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>> OK >>>>>> --> Modem initialized. >>>>>> --> Sending: ATDT060110 >>>>>> --> Waiting for carrier. >>>>>> ATDT060110 >>>>>> CONNECT 52000 >>>>>> --> Carrier detected. Waiting for prompt. >>>>>> ************************************************ >>>>>> * Product Name :Quidway A8010; * >>>>>> * Product Provider:HuaWei; * >>>>>> * Internet Server :######; * >>>>>> ************************************************ >>>>>> Welcome to INTERNET! >>>>>> Please input username: >>>>>> --> Looks like a login prompt. >>>>>> --> Sending: islanis@xxxxxxxxxxxxxx >>>>>> Please input password: >>>>>> --> Looks like a password prompt. >>>>>> --> Sending: (password) >>>>>> ********************** >>>>>> Can't contact authentication server. >>>>>> Authentication failed! >>>>>> Please input username: >>>>>> --> Looks like a login prompt. >>>>>> --> Sending: islanis@xxxxxxxxxxxxxx >>>>>> islanis@xxxxxxxxxxxxxx >>>>>> Please input password: >>>>>> --> Looks like a password prompt. >>>>>> --> Sending: (password) >>>>>> ** >>>>>> Auth-Reject from Radius Server. >>>>>> Authentication failed! >>>>>> Please input username: >>>>>> --> Looks like a login prompt. >>>>>> --> Sending: islanis@xxxxxxxxxxxxxx >>>>>> --> Don't know what to do! Starting pppd and hoping for the best. >>>>>> --> Starting pppd at Thu Feb 11 18:35:26 2010 >>>>>> --> Pid of pppd: 3250 >>>>>> --> Using interface ppp0 >>>>>> --> pppd: ??) ?) ?) >>>>>> --> pppd: ??) ?) ?) >>>>>> --> pppd: ??) ?) ?) >>>>>> --> pppd: ??) ?) ?) >>>>>> --> pppd: ??) ?) ?) >>>>>> --> Disconnecting at Thu Feb 11 18:35:28 2010 >>>>>> --> The PPP daemon has died: Authentication error. >>>>>> --> We failed to authenticate ourselves to the peer. >>>>>> --> Maybe bad account or password? (exit code = 19) >>>>>> --> man pppd explains pppd error codes in more detail. >>>>>> --> I guess that's it for now, exiting >>>>>> --> The PPP daemon has died. (exit code = 19) >>>>>> >>>>>> and with the second >>>>>> >>>>>> >>>>>> root@juan-desktop:/home/juan# wvdial infomed1 >>>>>> --> WvDial: Internet dialer version 1.60 >>>>>> --> Cannot get information for serial port. >>>>>> --> Initializing modem. >>>>>> --> Sending: ATZ >>>>>> ATZ >>>>>> OK >>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>> OK >>>>>> --> Modem initialized. >>>>>> --> Sending: ATDT8314949 >>>>>> --> Waiting for carrier. >>>>>> ATDT8314949 >>>>>> BUSY >>>>>> --> The line is busy. Trying again. >>>>>> --> Sending: ATDT8314949 >>>>>> --> Waiting for carrier. >>>>>> ATDT8314949 >>>>>> BUSY >>>>>> --> The line is busy. Trying again. >>>>>> --> Sending: ATDT8314949 >>>>>> --> Waiting for carrier. >>>>>> ATDT8314949 >>>>>> BUSY >>>>>> --> The line is busy. Trying again. >>>>>> --> Sending: ATDT8314949 >>>>>> --> Waiting for carrier. >>>>>> ATDT8314949 >>>>>> ^CCaught signal 2: Attempting to exit gracefully... >>>>>> --> Disconnecting at Thu Feb 11 18:37:24 2010 >>>>>> >>>>>> and nothing,,,, >>>>>> helpppp, what else >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> ----- Original Message ----- >>>>>> From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> >>>>>> To: "islanis" <islanis@xxxxxxxxxxxxxx> >>>>>> Cc: <discuss@xxxxxxxxxxxxx> >>>>>> Sent: Saturday, February 13, 2010 1:33 AM >>>>>> Subject: Re: help motorola sm56 is not conecting >>>>>> >>>>>> >>>>>> Juan >>>>>> >>>>>> Good progress. The problem is now one of logon protocol >>>>>> RE: --> Carrier detected. Starting PPP immediately. >>>>>> Please make sure that >>>>>> Stupid Mode = on >>>>>> is not active. It can be inactivated by preceding it with a #, as in: >>>>>> # Stupid Mode = on >>>>>> >>>>>> Starting PPP immediately. >>>>>> indicates that logon and password on not being sent, so >>>>>> --> The PPP daemon has died: Authentication error. >>>>>> --> We failed to authenticate ourselves to the peer. >>>>>> >>>>>> MarvS >>>>>> >>>>>> >>>>>> On Wed, Feb 10, 2010 at 11:20 PM, islanis <islanis@xxxxxxxxxxxxxx> >>>>>> wrote: >>>>>> >>>>>> >>>>>>> hey marv look at this i a changed my ISP number to another number but >>>>>>> the >>>>>>> same ISP and i got this >>>>>>> >>>>>>> >>>>>>> almost but nothing >>>>>>> >>>>>>> >>>>>>> root@juan-desktop:/home/juan# wvdial >>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>> --> Cannot get information for serial port. >>>>>>> --> Initializing modem. >>>>>>> --> Sending: ATZ >>>>>>> ATZ >>>>>>> OK >>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>>>> OK >>>>>>> --> Modem initialized. >>>>>>> --> Sending: ATDT060110 >>>>>>> --> Waiting for carrier. >>>>>>> ATDT060110 >>>>>>> CONNECT 50667 >>>>>>> --> Carrier detected. Starting PPP immediately. >>>>>>> --> Starting pppd at Wed Feb 10 20:06:18 2010 >>>>>>> --> Pid of pppd: 3425 >>>>>>> --> Using interface ppp0 >>>>>>> --> pppd: ??C[08]@?C[08][18]?C[08] >>>>>>> --> pppd: ??C[08]@?C[08][18]?C[08] >>>>>>> --> pppd: ??C[08]@?C[08][18]?C[08] >>>>>>> --> pppd: ??C[08]@?C[08][18]?C[08] >>>>>>> --> pppd: ??C[08]@?C[08][18]?C[08] >>>>>>> --> Disconnecting at Wed Feb 10 20:06:21 2010 >>>>>>> --> The PPP daemon has died: Authentication error. >>>>>>> --> We failed to authenticate ourselves to the peer. >>>>>>> --> Maybe bad account or password? (exit code = 19) >>>>>>> --> man pppd explains pppd error codes in more detail. >>>>>>> --> I guess that's it for now, exiting >>>>>>> --> The PPP daemon has died. (exit code = 19) >>>>>>> >>>>>>> ----- Original Message ----- >>>>>>> From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> >>>>>>> To: "Juan Alejandro Martinez Linares" <islanis@xxxxxxxxxxxxxx> >>>>>>> Cc: <discuss@xxxxxxxxxxxxx> >>>>>>> Sent: Thursday, February 11, 2010 2:35 PM >>>>>>> Subject: Re: help motorola sm56 is not conecting >>>>>>> >>>>>>> >>>>>>> Many (but not all) modem users are having this problem of the >>>>>>> specification >>>>>>> Carrier Check = no >>>>>>> seems to be ignored. >>>>>>> >>>>>>> Today I should be able to get home through some 20 miles of >>>>>>> Washington >>>>>>> area snow drifts, after 3 days stuck at a convention center, which is >>>>>>> usually only a 30 minute drive away. >>>>>>> >>>>>>> At home I will compile a variant of wvdial, >>>>>>> with default changed to >>>>>>> Carrier Check = no >>>>>>> Then those of you having problem can test it. >>>>>>> >>>>>>> MarvS >>>>>>> >>>>>>> On Thu, Feb 11, 2010 at 8:26 AM, Juan Alejandro Martinez Linares >>>>>>> <islanis@xxxxxxxxxxxxxx> wrote: >>>>>>> >>>>>>> >>>>>>>> one thing ,,i have omited one thing,, it dial only the 4 first >>>>>>>> numbers >>>>>>>> of >>>>>>>> the telephone >>>>>>>> number of my provider,, i heard it always the only 4 numbers ,, IE >>>>>>>> 8314 >>>>>>>> of >>>>>>>> 8314949, >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Mensaje citado por Antonio Olivares <olivares14031@xxxxxxxxx>: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> Juan, >>>>>>>>> >>>>>>>>> If you have a telephone, can you verify that the line is not busy? >>>>>>>>> It >>>>>>>>> might be ISP problem here? >>>>>>>>> >>>>>>>>> Si levantas el telefono, suena ocupado? Si no es probablemente un >>>>>>>>> problema con la red y tu provedor de Internet? >>>>>>>>> >>>>>>>>> Regards/Saludos, >>>>>>>>> >>>>>>>>> >>>>>>>>> Antonio >>>>>>>>> >>>>>>>>> On 2/10/10, Juan Alejandro Martinez Linares >>>>>>>>> <islanis@xxxxxxxxxxxxxx> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>>> i did this >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>>>>>>>>> Stupid Mode = on >>>>>>>>>> Auto DNS = off >>>>>>>>>> to >>>>>>>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34 >>>>>>>>>> # Stupid Mode = on >>>>>>>>>> Idle Seconds = 12 >>>>>>>>>> Auto DNS = on >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> and it sais this >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> root@juan-desktop:/home/juan# wvdial infomed3 >>>>>>>>>> --> WvDial: Internet dialer version 1.60 >>>>>>>>>> --> Cannot get information for serial port. >>>>>>>>>> --> Initializing modem. >>>>>>>>>> --> Sending: ATZ >>>>>>>>>> ATZ >>>>>>>>>> OK >>>>>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34 >>>>>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34 >>>>>>>>>> OK >>>>>>>>>> --> Modem initialized. >>>>>>>>>> --> Idle Seconds = 12, disabling automatic reconnect. >>>>>>>>>> --> Sending: ATDT8314949 >>>>>>>>>> --> Waiting for carrier. >>>>>>>>>> ATDT8314949 >>>>>>>>>> BUSY >>>>>>>>>> --> The line is busy. Trying again. >>>>>>>>>> --> Sending: ATDT8314949 >>>>>>>>>> --> Waiting for carrier. >>>>>>>>>> ATDT8314949 >>>>>>>>>> BUSY >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> what else >>>>>>>>>> >>>>>>>>>> ------------------------------ >>>>>>>>>> Infomed - Red de Salud de Cuba >>>>>>>>>> http://www.sld.cu/ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> >>>>>>>>>> Este mensaje le ha llegado mediante el servicio de correo >>>>>>>>>> electronico >>>>>>>>>> que >>>>>>>>>> ofrece Infomed para respaldar el cumplimiento de las misiones del >>>>>>>>>> Sistema >>>>>>>>>> Nacional de Salud. La persona que envia este correo asume el >>>>>>>>>> compromiso >>>>>>>>>> de >>>>>>>>>> usar el servicio a tales fines y cumplir con las regulaciones >>>>>>>>>> establecidas >>>>>>>>>> >>>>>>>>>> Infomed: http://www.sld.cu/ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Infomed - Red de Salud de Cuba >>>>>>>> http://www.sld.cu/ >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> >>>>>>>> Este mensaje le ha llegado mediante el servicio de correo >>>>>>>> electronico >>>>>>>> que >>>>>>>> ofrece Infomed para respaldar el cumplimiento de las misiones del >>>>>>>> Sistema >>>>>>>> Nacional de Salud. La persona que envia este correo asume el >>>>>>>> compromiso >>>>>>>> de >>>>>>>> usar el servicio a tales fines y cumplir con las regulaciones >>>>>>>> establecidas >>>>>>>> >>>>>>>> Infomed: http://www.sld.cu/ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> __________ Informacin de ESET Smart Security, versin de la base de >>>>>>> firmas >>>>>>> >>>>>>> de >>>>>>> virus 4804 (20100125) __________ >>>>>>> >>>>>>> ESET Smart Security ha comprobado este mensaje. >>>>>>> >>>>>>> http://www.eset.com >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> __________ Información de ESET Smart Security, versión de la base de >>>>>>> firmas de virus 4804 (20100125) __________ >>>>>>> >>>>>>> ESET Smart Security ha comprobado este mensaje. >>>>>>> >>>>>>> http://www.eset.com >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> >>>>>>> Este mensaje le ha llegado mediante el servicio de correo electronico >>>>>>> que >>>>>>> >>>>>>> ofrece Infomed para respaldar el cumplimiento de las misiones del >>>>>>> Sistema >>>>>>> >>>>>>> Nacional de Salud. La persona que envia este correo asume el >>>>>>> compromiso >>>>>>> de >>>>>>> usar el servicio a tales fines y cumplir con las regulaciones >>>>>>> establecidas >>>>>>> >>>>>>> Infomed: http://www.sld.cu/ >>>>>>> >>>>>>> >>>>>>> >>>>>> __________ Informacin de ESET Smart Security, versin de la base de >>>>>> firmas >>>>>> de >>>>>> virus 4804 (20100125) __________ >>>>>> >>>>>> ESET Smart Security ha comprobado este mensaje. >>>>>> >>>>>> http://www.eset.com >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> __________ Información de ESET Smart Security, versión de la base de >>>>>> firmas de virus 4804 (20100125) __________ >>>>>> >>>>>> ESET Smart Security ha comprobado este mensaje. >>>>>> >>>>>> http://www.eset.com >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> Este mensaje le ha llegado mediante el servicio de correo electronico >>>>>> que >>>>>> ofrece Infomed para respaldar el cumplimiento de las misiones del >>>>>> Sistema >>>>>> Nacional de Salud. La persona que envia este correo asume el >>>>>> compromiso >>>>>> de >>>>>> usar el servicio a tales fines y cumplir con las regulaciones >>>>>> establecidas >>>>>> >>>>>> Infomed: http://www.sld.cu/ >>>>>> >>>>>> >>>>> >>>> __________ Información de ESET Smart Security, versión de la base de >>>> firmas >>>> de virus 4804 (20100125) __________ >>>> >>>> ESET Smart Security ha comprobado este mensaje. >>>> >>>> http://www.eset.com >>>> >>>> >>>> >>>> >>>> >>>> __________ Información de ESET Smart Security, versión de la base de >>>> firmas >>>> de virus 4804 (20100125) __________ >>>> >>>> ESET Smart Security ha comprobado este mensaje. >>>> >>>> http://www.eset.com >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> >>>> Este mensaje le ha llegado mediante el servicio de correo electronico >>>> que >>>> ofrece Infomed para respaldar el cumplimiento de las misiones del >>>> Sistema >>>> Nacional de Salud. La persona que envia este correo asume el compromiso >>>> de >>>> usar el servicio a tales fines y cumplir con las regulaciones >>>> establecidas >>>> >>>> Infomed: http://www.sld.cu/ >>>> >>>> >>> >>> __________ Información de ESET Smart Security, versión de la base de >>> firmas >>> de virus 4804 (20100125) __________ >>> >>> ESET Smart Security ha comprobado este mensaje. >>> >>> http://www.eset.com >>> >>> >>> >>> >>> >>> __________ Información de ESET Smart Security, versión de la base de >>> firmas de virus 4804 (20100125) __________ >>> >>> ESET Smart Security ha comprobado este mensaje. >>> >>> http://www.eset.com >>> >>> >>> >>> >>> >>> -- >>> >>> Este mensaje le ha llegado mediante el servicio de correo electronico que >>> ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema >>> Nacional de Salud. La persona que envia este correo asume el compromiso >>> de >>> usar el servicio a tales fines y cumplir con las regulaciones >>> establecidas >>> >>> Infomed: http://www.sld.cu/ >>> >> >> > > __________ Información de ESET Smart Security, versión de la base de firmas > de virus 4804 (20100125) __________ > > ESET Smart Security ha comprobado este mensaje. > > http://www.eset.com > > > > > > > > > > -- > > Este mensaje le ha llegado mediante el servicio de correo electronico que > ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema > Nacional de Salud. La persona que envia este correo asume el compromiso de > usar el servicio a tales fines y cumplir con las regulaciones establecidas > > Infomed: http://www.sld.cu/ >
