Hello
My name is Hemad and I'm new ubuntu user from Iran My Onboard modem
gets wrong so I installed a PCI dial-up modem as Intel (R) 536PE v.92
Now I ask you for 536pe install guides. By the way I tried lots of
drivers of 536pe but neither pppconfig nor networking option in Ubuntu
could connect.
Besides I can connect to internet from windows XP
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.28-11-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
scanModem update of: 2010_01_13
The modem symbolic link is /dev/modem -> 536ep0
The dialer utility package WVDIAL does not appear to be installed on your System.
For Ubuntu users, there are at the bottom of http://linmodems.technion.ac.il/packages/
packages with the files necessary to install wvdial, with names like:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
wvdial_karmic_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_via82xx_modem Intel536
Attached USB devices are:
ID 1241:1122 Belkin Typhoon Stream Optical Mouse USB+PS/2
ID 093a:2468 Pixart Imaging, Inc. Cammaestro 2.5DU/X-EYE/Orite SC-120/ICGear TravelCam/Easy Snap Snake Eye WebCam
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:0a.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:0a.0 8086:1040 8086:1000 Communication controller: Intel Corporation 536EP Data Fax Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 00:0a.0 ----
[ 0.730779] pci 0000:00:0a.0: reg 10 32bit mmio: [0xdfc00000-0xdfffffff]
[ 0.730822] pci 0000:00:0a.0: supports D2
[ 0.730824] pci 0000:00:0a.0: PME# supported from D2 D3hot
[ 0.730830] pci 0000:00:0a.0: PME# disabled
The PCI slot 00:0a.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:11.6, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:11.6 1106:3068 1543:4c21 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller
Modem interrupt assignment and sharing:
22: 0 IO-APIC-fasteoi VIA82XX-MODEM
--- Bootup diagnostics for card in PCI slot 00:11.6 ----
[ 0.731394] pci 0000:00:11.6: reg 10 io port: [0xcc00-0xccff]
[ 0.731436] pci 0000:00:11.6: supports D1 D2
[ 13.676523] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 13.682044] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.20
The modem cards detected by "aplay -l" are:
card 1: modem [VIA 82XX modem], device 0: VIA 82XX modem [VIA 82XX modem]
The /proc/asound/pcm file reports:
-----------------------
00-00: es-1938-1946 : ESS Solo-1 : playback 2 : capture 1
01-00: VIA 82XX modem : VIA 82XX modem : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [Solo1 ]: ES1938 - ESS ES1938 (Solo-1)
ESS ES1938 (Solo-1) rev 0, irq 17
1 [modem ]: VIA82XX-MODEM - VIA 82XX modem
VIA 82XX modem at 0xcc00, irq 22
Modem firmware information is in /proc/asound/card1/codec97#0/mc97#1-1
-----------------------------------------------
Extended modem ID: codec=1 LIN1
Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349 and 0:7e = 4c21
are translated from hexadecimal code into the modem chip identifier: SIL21
The driver snd-via82xx-modem with its dependent drivers:
snd_via82xx_modem 19464 0
snd_ac97_codec 112548 1 snd_via82xx_modem
snd_pcm 82948 4 snd_via82xx_modem,snd_ac97_codec,snd_es1938,snd_pcm_oss
snd_page_alloc 17032 2 snd_via82xx_modem,snd_pcm
snd 66724 21 snd_via82xx_modem,snd_ac97_codec,snd_es1938,snd_pcm_oss,snd_mixer_oss,snd_opl3_lib,snd_pcm,snd_hwdep,snd_mpu401_uart,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
----------
provide modem + audio support.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:0a.0:
Modem chipset detected on
NAME="Communication controller: Intel Corporation 536EP Data Fax Modem"
CLASS=0780
PCIDEV=8086:1040
SUBSYS=8086:1000
IRQ=12
CodecDiagnosed=SIL21
CodecClass=SIL
IDENT=slmodemd
Driver=snd-via82xx-modem
For candidate modem in: 00:0a.0
0780 Communication controller: Intel Corporation 536EP Data Fax Modem
Primary device ID: 8086:1040
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-via82xx-modem
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.3.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Predictive diagnostics for card in bus 00:11.6:
Modem chipset detected on
NAME="Communication controller: VIA Technologies, Inc. AC'97 Modem Controller "
CLASS=0780
PCIDEV=1106:3068
SUBSYS=1543:4c21
IRQ=22
SOFT=1106:3068.MC97
CodecArchived=SIL21
CodecClass=SIL
IDENT=slmodemd
SLMODEMD_DEVICE=modem:1
Driver=snd-via82xx-modem
For candidate modem in: 00:11.6
0780 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller
Primary device ID: 1106:3068
Subsystem PCI_id 1543:4c21
Softmodem codec or chipset from diagnostics:
from Archives: SIL21
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-via82xx-modem
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.3.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.3
and the compiler used in kernel assembly: 4.3.3
The patch utility is needed for compiling ALSA drivers, and possibly others.
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.28-11-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-x 1 root dip 277352 2009-02-20 20:55 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2010-01-26 21:32 /dev/modem -> 536ep0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/10-intel536.rules:KERNEL=="536ep*", SYMLINK+="modem", MODE="0666", OWNER="root", GROUP="dialout"
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0
0: 202 IO-APIC-edge timer
1: 13576 IO-APIC-edge i8042
4: 6 IO-APIC-edge
6: 5 IO-APIC-edge floppy
7: 0 IO-APIC-edge parport0
8: 0 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
14: 84496 IO-APIC-edge pata_via
15: 178822 IO-APIC-edge pata_via
17: 3540 IO-APIC-fasteoi ES1938
21: 218562 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4
22: 0 IO-APIC-fasteoi VIA82XX-MODEM
23: 0 IO-APIC-fasteoi eth0
NMI: 0 Non-maskable interrupts
LOC: 1771749 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)
[ 0.000000] BIOS-e820: 000000000dff0000 - 000000000dff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000dff8000 - 000000000e000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0xdff0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000000dff0000 (usable)
[ 0.000000] modified: 000000000dff0000 - 000000000dff8000 (ACPI data)
[ 0.000000] modified: 000000000dff8000 - 000000000e000000 (ACPI NVS)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to dff0000 @ 10000-16000
[ 0.000000] RAMDISK: 0d8b2000 - 0dfdf8e2
[ 0.000000] ACPI: RSDP 000FA1A0, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 0DFF0000, 002C (r1 AMIINT VIA_P6 10 MSFT 97)
[ 0.000000] ACPI: FACP 0DFF0030, 0081 (r1 AMIINT VIA_P6 11 MSFT 97)
[ 0.000000] ACPI: DSDT 0DFF0120, 30C9 (r1 VIA P4M266 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 0DFF8000, 0040
[ 0.000000] ACPI: APIC 0DFF00C0, 005C (r1 AMIINT VIA_P6 9 MSFT 97)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 223MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0dff0000
[ 0.000000] low ram: 00000000 - 0dff0000
[ 0.000000] bootmap 00012000 - 00013c00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000dff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000d8b2000 - 000dfdf8e2] RAMDISK ==> [000d8b2000 - 000dfdf8e2]
[ 0.000000] #5 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000014000] BOOTMAP ==> [0000012000 - 0000014000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000dff0
[ 0.000000] HighMem 0x0000dff0 -> 0x0000dff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000dff0
[ 0.000000] On node 0 totalpages: 57215
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 416 pages used for memmap
[ 0.000000] Normal zone: 52816 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: e000000:f0c00000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56767
[ 0.000000] Kernel command line: root=UUID=c80f3c0f-1603-4e69-a3b5-868754deb3d5 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] Detected 2395.908 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.004000] allocated 1146240 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 210332k/229312k available (4126k kernel code, 18276k reserved, 2208k data, 532k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xce7f0000 - 0xff3fe000 ( 780 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004026] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.81 BogoMIPS (lpj=9583632)
[ 0.004089] Security Framework initialized
[ 0.004112] SELinux: Disabled at boot.
[ 0.004164] AppArmor: AppArmor initialized
[ 0.004199] Mount-cache hash table entries: 512
[ 0.004700] Initializing cgroup subsys ns
[ 0.004728] Initializing cgroup subsys cpuacct
[ 0.004737] Initializing cgroup subsys memory
[ 0.004754] Initializing cgroup subsys freezer
[ 0.004811] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004819] CPU: L2 cache: 128K
[ 0.004829] CPU: Hyper-Threading is disabled
[ 0.004894] Checking 'hlt' instruction... OK.
[ 0.021221] SMP alternatives: switching to UP code
[ 0.284067] ACPI: Core revision 20080926
[ 0.291307] ACPI: Checking initramfs for custom DSDT
[ 0.659815] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.699538] CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
[ 0.700002] Brought up 1 CPUs
[ 0.700002] Total of 1 processors activated (4791.81 BogoMIPS).
[ 0.700002] CPU0 attaching NULL sched-domain.
[ 0.700002] net_namespace: 776 bytes
[ 0.700002] Booting paravirtualized kernel on bare hardware
[ 0.700002] Time: 21:31:54 Date: 01/26/10
[ 0.700002] regulator: core version 0.5
[ 0.700002] NET: Registered protocol family 16
[ 0.700280] EISA bus registered
[ 0.700340] ACPI: bus type pci registered
[ 0.706339] PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1
[ 0.706346] PCI: Using configuration type 1 for base access
[ 0.711368] ACPI: EC: Look up EC in DSDT
[ 0.720389] ACPI: Interpreter enabled
[ 0.720404] ACPI: (supports S0 S1 S4 S5)
[ 0.720440] ACPI: Using IOAPIC for interrupt routing
[ 0.730308] ACPI: No dock devices found.
[ 0.730367] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.730514] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
[ 0.730609] pci 0000:00:01.0: supports D1
[ 0.730680] pci 0000:00:09.0: reg 10 io port: [0xec00-0xec3f]
[ 0.730689] pci 0000:00:09.0: reg 14 io port: [0xe800-0xe80f]
[ 0.730698] pci 0000:00:09.0: reg 18 io port: [0xe400-0xe40f]
[ 0.730706] pci 0000:00:09.0: reg 1c io port: [0xe000-0xe003]
[ 0.730715] pci 0000:00:09.0: reg 20 io port: [0xdc00-0xdc03]
[ 0.730740] pci 0000:00:09.0: supports D1 D2
[ 0.730779] pci 0000:00:0a.0: reg 10 32bit mmio: [0xdfc00000-0xdfffffff]
[ 0.730822] pci 0000:00:0a.0: supports D2
[ 0.730824] pci 0000:00:0a.0: PME# supported from D2 D3hot
[ 0.730830] pci 0000:00:0a.0: PME# disabled
[ 0.730893] pci 0000:00:10.0: reg 20 io port: [0xd000-0xd01f]
[ 0.730914] pci 0000:00:10.0: supports D1 D2
[ 0.730917] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.730921] pci 0000:00:10.0: PME# disabled
[ 0.730978] pci 0000:00:10.1: reg 20 io port: [0xd400-0xd41f]
[ 0.730999] pci 0000:00:10.1: supports D1 D2
[ 0.731001] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.731006] pci 0000:00:10.1: PME# disabled
[ 0.731061] pci 0000:00:10.2: reg 20 io port: [0xd800-0xd81f]
[ 0.731082] pci 0000:00:10.2: supports D1 D2
[ 0.731084] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.731089] pci 0000:00:10.2: PME# disabled
[ 0.731125] pci 0000:00:10.3: reg 10 32bit mmio: [0xdfbfff00-0xdfbfffff]
[ 0.731165] pci 0000:00:10.3: supports D1 D2
[ 0.731168] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.731173] pci 0000:00:10.3: PME# disabled
[ 0.731249] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.731262] pci 0000:00:11.0: quirk: region 0800-087f claimed by vt8235 PM
[ 0.731266] pci 0000:00:11.0: quirk: region 0400-040f claimed by vt8235 SMB
[ 0.731331] pci 0000:00:11.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.731394] pci 0000:00:11.6: reg 10 io port: [0xcc00-0xccff]
[ 0.731436] pci 0000:00:11.6: supports D1 D2
[ 0.731474] pci 0000:00:12.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.731482] pci 0000:00:12.0: reg 14 32bit mmio: [0xdfbffe00-0xdfbffeff]
[ 0.731519] pci 0000:00:12.0: supports D1 D2
[ 0.731521] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.731526] pci 0000:00:12.0: PME# disabled
[ 0.731593] pci 0000:01:00.0: reg 10 32bit mmio: [0xdf680000-0xdf6fffff]
[ 0.731601] pci 0000:01:00.0: reg 14 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.731625] pci 0000:01:00.0: reg 30 32bit mmio: [0xdf670000-0xdf67ffff]
[ 0.731634] pci 0000:01:00.0: supports D1 D2
[ 0.731682] pci 0000:00:01.0: bridge 32bit mmio: [0xdf500000-0xdf6fffff]
[ 0.731688] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcf400000-0xdf3fffff]
[ 0.731698] bus 00 -> node 0
[ 0.731732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.755401] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.755682] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.755945] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 0.756282] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.756535] ACPI: Power Resource [URP1] (off)
[ 0.756638] ACPI: Power Resource [URP2] (off)
[ 0.756740] ACPI: Power Resource [FDDP] (off)
[ 0.756844] ACPI: Power Resource [LPTP] (off)
[ 0.757142] ACPI: WMI: Mapper loaded
[ 0.757902] SCSI subsystem initialized
[ 0.758182] libata version 3.00 loaded.
[ 0.758458] usbcore: registered new interface driver usbfs
[ 0.758534] usbcore: registered new interface driver hub
[ 0.758732] usbcore: registered new device driver usb
[ 0.759388] PCI: Using ACPI for IRQ routing
[ 0.759655] Bluetooth: Core ver 2.13
[ 0.760104] NET: Registered protocol family 31
[ 0.760109] Bluetooth: HCI device and connection manager initialized
[ 0.760117] Bluetooth: HCI socket layer initialized
[ 0.760124] NET: Registered protocol family 8
[ 0.760127] NET: Registered protocol family 20
[ 0.760204] NetLabel: Initializing
[ 0.760206] NetLabel: domain hash size = 128
[ 0.760208] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.760252] NetLabel: unlabeled traffic allowed by default
[ 0.760526] AppArmor: AppArmor Filesystem Enabled
[ 0.760612] pnp: PnP ACPI init
[ 0.760612] ACPI: bus type pnp registered
[ 0.767243] pnp: PnP ACPI: found 11 devices
[ 0.767254] ACPI: ACPI bus type pnp unregistered
[ 0.767267] PnPBIOS: Disabled by ACPI PNP
[ 0.767316] system 00:05: ioport range 0x295-0x296 has been reserved
[ 0.767319] system 00:05: ioport range 0x3f0-0x3f1 has been reserved
[ 0.767325] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.767328] system 00:05: ioport range 0x400-0x40f has been reserved
[ 0.767331] system 00:05: ioport range 0x800-0x87f has been reserved
[ 0.767338] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.767342] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.802629] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.802635] pci 0000:00:01.0: IO window: disabled
[ 0.802642] pci 0000:00:01.0: MEM window: 0xdf500000-0xdf6fffff
[ 0.802648] pci 0000:00:01.0: PREFETCH window: 0x000000cf400000-0x000000df3fffff
[ 0.802673] pci 0000:00:01.0: setting latency timer to 64
[ 0.802679] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.802683] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.802686] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.802689] bus: 01 index 1 mmio: [0xdf500000-0xdf6fffff]
[ 0.802692] bus: 01 index 2 mmio: [0xcf400000-0xdf3fffff]
[ 0.802694] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.802730] NET: Registered protocol family 2
[ 0.803088] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.803581] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.803719] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.803872] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.803879] TCP reno registered
[ 0.804467] NET: Registered protocol family 1
[ 0.804745] checking if image is initramfs... it is
[ 1.304066] Switched to high resolution mode on CPU 0
[ 1.671298] Freeing initrd memory: 7350k freed
[ 1.671553] cpufreq: No nForce2 chipset.
[ 1.672157] audit: initializing netlink socket (disabled)
[ 1.672211] type=2000 audit(1264541514.672:1): initialized
[ 1.680482] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.683086] VFS: Disk quotas dquot_6.5.1
[ 1.683313] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.685490] fuse init (API version 7.10)
[ 1.685833] msgmni has been set to 425
[ 1.686617] alg: No test for stdrng (krng)
[ 1.686719] io scheduler noop registered
[ 1.686723] io scheduler anticipatory registered
[ 1.686727] io scheduler deadline registered
[ 1.686840] io scheduler cfq registered (default)
[ 1.686875] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.687000] pci 0000:01:00.0: Boot video device
[ 1.691607] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.691633] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.692189] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.692200] ACPI: Power Button (FF) [PWRF]
[ 1.692346] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.692353] ACPI: Power Button (CM) [PWRB]
[ 1.692951] processor ACPI_CPU:00: registered as cooling_device0
[ 1.695905] isapnp: Scanning for PnP cards...
[ 2.049735] isapnp: No Plug & Play device found
[ 2.054624] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.054805] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.055577] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.058601] brd: module loaded
[ 2.059966] loop: module loaded
[ 2.060322] Fixed MDIO Bus: probed
[ 2.060335] PPP generic driver version 2.4.2
[ 2.060533] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 2.060627] Driver 'sd' needs updating - please use bus_type methods
[ 2.060650] Driver 'sr' needs updating - please use bus_type methods
[ 2.062267] pata_via 0000:00:11.1: version 0.3.3
[ 2.062322] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[ 2.062924] scsi0 : pata_via
[ 2.063379] scsi1 : pata_via
[ 2.067179] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 2.067186] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 2.260390] ata1.00: HPA unlocked: 240119615 -> 240121728, native 240121728
[ 2.260401] ata1.00: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
[ 2.260404] ata1.00: 240121728 sectors, multi 16: LBA
[ 2.276522] ata1.00: configured for UDMA/133
[ 2.456872] ata2.00: ATAPI: ASUS CD-S400/A, 2.0K, max UDMA/33
[ 2.456919] ata2.01: ATAPI: HL-DT-ST RW/DVD GCC-H23N, 1.01, max UDMA/33
[ 2.457519] ata2.00: configured for UDMA/33
[ 2.488298] ata2.01: configured for UDMA/33
[ 2.489215] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
[ 2.489712] sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors: (122 GB/114 GiB)
[ 2.489834] sd 0:0:0:0: [sda] Write Protect is off
[ 2.489838] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.490037] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.490413] sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors: (122 GB/114 GiB)
[ 2.490532] sd 0:0:0:0: [sda] Write Protect is off
[ 2.490537] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.490741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.490762] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
[ 2.599503] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.599729] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.600400] scsi 1:0:0:0: CD-ROM ASUS CD-S400/A 2.0K PQ: 0 ANSI: 5
[ 2.603256] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 2.603269] Uniform CD-ROM driver Revision: 3.20
[ 2.603655] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.603866] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.605173] scsi 1:0:1:0: CD-ROM HL-DT-ST RW/DVD GCC-H23N 1.01 PQ: 0 ANSI: 5
[ 2.608217] sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 2.608543] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 2.608750] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 2.609411] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.609538] ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 2.609614] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 2.609904] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[ 2.610057] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdfbfff00
[ 2.620059] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[ 2.620316] usb usb1: configuration #1 chosen from 1 choice
[ 2.620399] hub 1-0:1.0: USB hub found
[ 2.620436] hub 1-0:1.0: 6 ports detected
[ 2.620894] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.620976] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.621158] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.621182] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.621411] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.621462] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d000
[ 2.621763] usb usb2: configuration #1 chosen from 1 choice
[ 2.621868] hub 2-0:1.0: USB hub found
[ 2.621907] hub 2-0:1.0: 2 ports detected
[ 2.622324] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.622351] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.622570] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.622627] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400
[ 2.622917] usb usb3: configuration #1 chosen from 1 choice
[ 2.623016] hub 3-0:1.0: USB hub found
[ 2.623059] hub 3-0:1.0: 2 ports detected
[ 2.623476] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.623503] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.623729] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2.623777] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
[ 2.624186] usb usb4: configuration #1 chosen from 1 choice
[ 2.624281] hub 4-0:1.0: USB hub found
[ 2.624333] hub 4-0:1.0: 2 ports detected
[ 2.624888] usbcore: registered new interface driver libusual
[ 2.625018] usbcore: registered new interface driver usbserial
[ 2.625050] USB Serial support registered for generic
[ 2.625126] usbcore: registered new interface driver usbserial_generic
[ 2.625130] usbserial: USB Serial Driver core
[ 2.625265] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.625270] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.625501] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.626053] mice: PS/2 mouse device common for all mice
[ 2.626725] rtc_cmos 00:07: RTC can wake from S4
[ 2.626907] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.626988] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 2.627248] device-mapper: uevent: version 1.0.3
[ 2.627882] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 2.628286] device-mapper: multipath: version 1.0.5 loaded
[ 2.628301] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.628769] EISA: Probing bus 0 at eisa.0
[ 2.628819] EISA: Detected 0 cards.
[ 2.629011] cpuidle: using governor ladder
[ 2.629019] cpuidle: using governor menu
[ 2.630042] TCP cubic registered
[ 2.630300] NET: Registered protocol family 10
[ 2.631475] lo: Disabled Privacy Extensions
[ 2.632360] NET: Registered protocol family 17
[ 2.632482] Bluetooth: L2CAP ver 2.11
[ 2.632487] Bluetooth: L2CAP socket layer initialized
[ 2.632495] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.632497] Bluetooth: SCO socket layer initialized
[ 2.632724] Bluetooth: RFCOMM socket layer initialized
[ 2.632766] Bluetooth: RFCOMM TTY layer initialized
[ 2.632770] Bluetooth: RFCOMM ver 1.10
[ 2.633017] Using IPI No-Shortcut mode
[ 2.633440] registered taskstats version 1
[ 2.633661] Magic number: 10:628:551
[ 2.633702] block sda: hash matches
[ 2.633780] pci_link PNP0C0F:02: hash matches
[ 2.633874] rtc_cmos 00:07: setting system clock to 2010-01-26 21:31:56 UTC (1264541516)
[ 2.633881] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.633884] EDD information not available.
[ 2.636253] Freeing unused kernel memory: 532k freed
[ 2.636440] Write protecting the kernel text: 4128k
[ 2.636491] Write protecting the kernel read-only data: 1532k
[ 2.655061] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.236087] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 3.442020] Floppy drive(s): fd0 is 1.44M
[ 3.460937] FDC 0 is a post-1991 82077
[ 3.470138] usb 2-2: configuration #1 chosen from 1 choice
[ 3.713919] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 3.877833] usb 3-1: configuration #1 chosen from 1 choice
[ 4.017578] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 4.017734] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.031395] eth0: VIA Rhine II at 0xdfbffe00, 00:0b:6a:20:1e:90, IRQ 23.
[ 4.032152] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 5.186361] usbcore: registered new interface driver hiddev
[ 5.208527] input: HID 1241:1122 as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input4
[ 5.212251] generic-usb 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:10.1-1/input0
[ 5.212311] usbcore: registered new interface driver usbhid
[ 5.212319] usbhid: v2.6:USB HID core driver
[ 5.394173] PM: Starting manual resume from disk
[ 5.394184] PM: Resume from partition 8:12
[ 5.394186] PM: Checking hibernation image.
[ 5.394748] PM: Resume from disk failed.
[ 5.427067] kjournald starting. Commit interval 5 seconds
[ 5.427124] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.249889] udev: starting version 141
[ 11.675476] parport_pc 00:03: reported by Plug and Play ACPI
[ 11.675628] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 11.786979] Linux agpgart interface v0.103
[ 11.805565] agpgart: Detected VIA P4M266x/P4N266 chipset
[ 11.819484] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 11.910191] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.038551] Linux video capture interface: v2.00
[ 12.111720] gspca: main v2.3.0 registered
[ 12.127525] gspca: probing 093a:2468
[ 12.130041] pac207: Pixart Sensor ID 0x27 Chips ID 0x00
[ 12.130051] pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2468)
[ 12.134839] gspca: probe ok
[ 12.135006] usbcore: registered new interface driver pac207
[ 12.135210] pac207: registered
[ 12.387810] irda_init()
[ 12.387867] NET: Registered protocol family 23
[ 12.820642] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.480771] ESS ES1938 (Solo-1) 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.506506] gameport: ES1938 is pci0000:00:09.0/gameport0, io 0xdc00, speed 1065kHz
[ 13.676523] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 13.682044] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[ 14.288212] ALSA /usr/lib/alsa-driver-linuxant/pci/ac97/ac97_codec.c:2171: MC'97 1 converters and GPIO not ready (0xf000)
[ 14.466571] ppdev: user-space parallel port driver
[ 15.274599] lp0: using parport0 (interrupt-driven).
[ 15.689869] Adding 289128k swap on /dev/sda12. Priority:-1 extents:1 across:289128k
[ 86.606896] EXT3 FS on sda11, internal journal
[ 88.931260] type=1505 audit(1264529002.794:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2685
[ 89.057535] type=1505 audit(1264529002.922:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2689
[ 89.058217] type=1505 audit(1264529002.922:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2689
[ 89.058690] type=1505 audit(1264529002.922:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2689
[ 89.059025] type=1505 audit(1264529002.922:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2689
[ 89.355450] type=1505 audit(1264529003.218:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2694
[ 89.356581] type=1505 audit(1264529003.222:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2694
[ 89.434257] type=1505 audit(1264529003.298:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2698
[ 96.683848] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 96.683859] Bluetooth: BNEP filters: protocol multicast
[ 96.744958] Bridge firewalling registered
[ 100.927052] [drm] Initialized drm 1.1.0 20060810
[ 100.989076] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 100.989467] [drm] Initialized savage 2.4.1 20050313 on minor 0
[ 101.130046] mtrr: base(0xd2000000) is not aligned on a size(0x5000000) boundary
[ 101.131044] mtrr: base(0xd2000000) is not aligned on a size(0x5000000) boundary
[ 103.135364] eth0: link down
[ 103.135534] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2960.371885] atkbd.c: Unknown key pressed (translated set 2, code 0x97 on isa0060/serio0).
[ 2960.371893] atkbd.c: Use 'setkeycodes e017 <keycode>' to make it known.
[ 2960.588076] atkbd.c: Unknown key released (translated set 2, code 0x97 on isa0060/serio0).
[ 2960.588084] atkbd.c: Use 'setkeycodes e017 <keycode>' to make it known.
[ 7563.678244] realplay.bin[7432]: segfault at 18 ip b7982fca sp bff34350 error 4 in libgtk-x11-2.0.so.0.1600.1[b7770000+3a9000]
Module Size Used by
nls_iso8859_1 12032 2
nls_cp437 13696 2
vfat 18816 2
fat 58272 1 vfat
binfmt_misc 16776 1
savage 39168 2
drm 96296 3 savage
bridge 56340 0
stp 10500 1 bridge
bnep 20224 2
input_polldev 11912 0
video 25360 0
output 11008 1 video
Intel536 1084676 0
lp 17156 0
ppdev 15620 0
snd_via82xx_modem 19464 0
snd_ac97_codec 112548 1 snd_via82xx_modem
ac97_bus 9856 1 snd_ac97_codec
snd_es1938 26532 3
snd_pcm_oss 45984 0
snd_mixer_oss 22912 1 snd_pcm_oss
gameport 19340 2 snd_es1938
snd_opl3_lib 18816 1 snd_es1938
pcspkr 10496 0
snd_pcm 82948 4 snd_via82xx_modem,snd_ac97_codec,snd_es1938,snd_pcm_oss
i2c_viapro 15892 0
snd_hwdep 15364 1 snd_opl3_lib
snd_page_alloc 17032 2 snd_via82xx_modem,snd_pcm
via_ircc 32660 0
snd_mpu401_uart 15360 1 snd_es1938
irda 197180 1 via_ircc
snd_seq_dummy 10884 0
crc_ccitt 10112 1 irda
snd_seq_oss 36224 0
snd_seq_midi 14240 0
snd_rawmidi 29856 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi
snd_seq 57456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
gspca_pac207 14592 0
gspca_main 29952 1 gspca_pac207
snd_timer 29192 3 snd_opl3_lib,snd_pcm,snd_seq
snd_seq_device 15372 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
videodev 41600 1 gspca_main
v4l1_compat 21764 1 videodev
snd 66724 21 snd_via82xx_modem,snd_ac97_codec,snd_es1938,snd_pcm_oss,snd_mixer_oss,snd_opl3_lib,snd_pcm,snd_hwdep,snd_mpu401_uart,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
shpchp 40212 0
soundcore 15200 1 snd
via_agp 16256 1
agpgart 42696 2 drm,via_agp
parport_pc 40100 1
parport 42220 3 lp,ppdev,parport_pc
usbhid 42336 0
via_rhine 30856 0
mii 13312 1 via_rhine
floppy 64324 0
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
