Re: Nick, Australia kernel 2.6.31 -- connect 460800

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Nick,

The problem doesn't seem to be the options then.
Could you make a Port.log of one of your dialups under Microsoft?
The option to do so will be somewhere within the Modem setup choices.

MarvS

On Fri, Jan 1, 2010 at 9:36 AM, Nick Wahl <nwahl@xxxxxxxxxxxxxx> wrote:
> Am I glad you know more about this than I, Marv. I get exactly the
> same output. - Nick
>
> nw@nw:~$ (egrep -v '#|^ *$' /etc/ppp/options)
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
> nw@nw:~$
>
> Marvin Stodolsky wrote:
>> Nick
>>
>> $ man pppd
>> relates for error 2
>>        2      An error was detected in processing the options given,
>> such as two mutually exclusive options being used.
>>
>> Please run:
>> $(egrep -v '#|^ *$' /etc/ppp/options)
>> and send me the output the List the output.
>> on my System the output is below
>>
>> MarvS
>>
>> asyncmap 0
>> noauth
>> crtscts
>> lock
>> hide-password
>> modem
>> proxyarp
>> lcp-echo-interval 30
>> lcp-echo-failure 4
>> noipx
>>
>>
>>
>>
>> On Mon, Dec 28, 2009 at 9:11 PM, Nick <nwahl@xxxxxxxxxxxxxx> wrote:
>>> Thanks, Marv. I thought the 'under Linux' was the answer, but it
>>> wasn't (see dialout attempt below). - Nick
>>>
>>> nw@nw:~$ sudo wvdial
>>> --> WvDial: Internet dialer version 1.60
>>> --> Initializing modem.
>>> --> Sending: ATZ
>>> ATZ
>>> OK
>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>> OK
>>> --> Modem initialized.
>>> --> Sending: ATDT0198331333
>>> --> Waiting for carrier.
>>> ATDT0198331333
>>> CONNECT 57600
>>> User Access Verification
>>>  Username: username: login:
>>> --> Carrier detected.  Waiting for prompt.
>>>  Username: username: login:
>>> --> Looks like a login prompt.
>>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>>> --> Sending: pacific.net.au/nwahl
>>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>>> pacific.net.au/nwahl
>>>  Password: password:
>>> --> Looks like a password prompt.
>>> --> Sending: (password)
>>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>>> % Authorization failed.
>>> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>>> --> Connected, but carrier signal lost!  Retrying...
>>> ^CCaught signal 2:  Attempting to exit gracefully...
>>> --> Disconnecting at Tue Dec 29 11:35:55 2009
>>> nw@nw:~$
>>>
>>> Marvin Stodolsky wrote:
>>>> Nick,
>>>>
>>>> If your IP uses CHAP authentification your may need instead of
>>>> LoginName under Linux
>>>>    pacific.net.au/LoginName
>>>>
>>>> MarvS
>>> [snip]
>>>
>>>
>>
>
>
>


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux